Hidravlične dvostebrične preše in štiristebrične preše nakup rabljenega (321)

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 500 t, Hydraulic 500 T Gantry Straightening Press with Tool Clamping Device and Parallel Guidance for Bending Blade a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 44 mm/sec c) Table size 2000 x 850 mm d) Open height 1500 mm e) Overall dimensions approx. LWH 1500 x 3000 x 4300 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipples Nsdpfxowgakvs Abbskt h) Table in grid/slot design i) Remote control j) Pressure setting from 80 T up to 500 T via rotary knob k) Table moves hydraulically outward by 700 mm for loading l) Cylinder travels left/right via rack and pinion m) Machine body powder-coated, or double painted n) T-slots according to customer specification o) Cylinder inductively hardened p) Installation, commissioning, and operator training charged separately Press type: GANTRY PRESS Thermally neutral: 80 – 120 °C Number of operating sides: 3 sides Forces Maximum pressing force: 5,000 kN Maximum free tearing force: 800 kN Pressure build-up time with closed tool (steel on steel): Max. 3 sec Dimensions Maximum opening width: 1500 mm Stroke and min. opening: 1300 mm / 200 mm Table height above floor approx.: 850 mm Height above floor (overall): approx. 4,300 mm Minimum hall height: 5,000 mm Deflection Measured at maximum closing force with 70% table coverage:

Stanje: rabljeno, Proizvajalec: EXNER Nkodpsxbf Ndefx Abbet Tip: EX 20 Maksimalna stiskalna sila: 20 t Velikost mize: 480 x 350 mm Maksimalna višina orodja: 230 mm

Stanje: rabljeno, Leto izdelave: 2014, Hidravlična portna stiskalnica je namenjena za upogibanje ali ravnanje ter za obdelavo končnih zvarjenih elementov, kot tudi za demontažo sklopov rudarskih strojev in drugih naprav. Uporablja se v strojnih, proizvodnih in servisnih delavnicah itd. Proizvajalec: PATENTUS S.A. Tip: PAT 300-2/250-2 Leto proizvodnje: 2017 Tehnične specifikacije: Dimenzije: širina: 4200x3140 mm, višina: 3600 mm Teža: 25000 kg Delovna površina mize: 4200 mm x 2140 mm Premer cilindrov portala 1: 2 x 300 mm Premer cilindrov portala 2: 2 x 250 mm Pritisk cilindrov portal 1: 2 x 1768 kN Pritisk cilindrov portal 2: 2 x 1228 kN Max. prehod: 1240 mm Hod delovnih cilindrov: 600-660 mm Premik portala: 1420 mm Oprema: - dve portni enoti Nkjdpfehktq Aox Abbet - delovna miza - 4 delovni cilindri - cilindri za premik portala - cilindri za premik delovnega cilindra - agregat s črpalko T-100/30 (leto 2006, remont leta 2011) Tehnično stanje: rabljeno, za pregled

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, širina mize: 1.000 mm, dolžina mize: 1.000 mm, razmak između stupova: 1.000 mm, sila umika: 100 t, hod: 800 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 300 / 100 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 300 / 100 ton four-column hydraulic drawing press is a highly rigid four-column hydraulic press solution developed for metal drawing, deep-drawing, and precision pressing applications. The St52 grade steel welded frame undergoes stress relief by vibration, ensuring parallelism and perpendicularity tolerances remain stable over the full stroke length throughout the pressing process. The ram and die cushion systems operate independently; stroke and tonnage settings are precisely controlled via the touch panel. With REXROTH or PARKER hydraulic components, an IE3 class motor, and a PLC-controlled system, the press offers high efficiency and reliable operation. Automatic lubrication and electronic filter contamination alerts minimize maintenance requirements. With a 300 / 100 ton capacity, this model is an ideal industrial press solution for medium- and high-tonnage metal drawing, deep-drawing, and die applications. Key Advantages - High rigidity four-column press frame - Independent stroke and tonnage adjustment for ram and die cushion - Full control via touch panel - High accuracy and repeatability - Long life, low maintenance cost design Application Areas - Metal drawing applications - Deep-drawing operations - Die testing and production lines - Auxiliary forming processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs induction hardened, chrome-plated shafts SLIDE GUIDING: Bronze Zr14 RAM CAPACITY: 300 tons DIE CUSHION CAPACITY: 100 tons DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter RAM STROKE: 800 mm DIE CUSHION STROKE: 200 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 900 mm WELDING STRESS RELIEF: Vibratory stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 30 kW – IE3 MAIN PUMP: 45 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT: 150 mm/sec DRAWING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec DIE CUSHION TABLE FORWARD SPEED: 30 mm/sec Nkodpfx Absx N Unzobot MAIN CYLINDER BORE: Ø 390 mm – Ck45 DIE CUSHION CYLINDER BORE: Ø 230 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 Units APPROX. PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BED HEIGHT FROM FLOOR: 1300 mm FRONT FILLING VALVE: NG 125 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 18 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, širina mize: 1.000 mm, dolžina mize: 1.000 mm, razmak između stupova: 1.000 mm, sila umika: 80 t, hod: 800 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 250 / 80 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 250 / 80 ton four-column hydraulic deep drawing press is a high-rigidity hydraulic press solution designed for metal forming, deep drawing, and precision pressing applications. The ST52 grade steel frame undergoes stress relief via vibration treatment to ensure long-term high parallelism and perpendicularity tolerances. The ram and cushion systems operate independently, allowing precise adjustment of stroke and pressure via the touchscreen panel. Featuring REXROTH or PARKER hydraulic components, IE3 class motors, and PLC-controlled structure, this model delivers high efficiency and reliable operation. Automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With its 250 / 80 ton capacity, this model is ideal for medium and heavy-duty metal forming, deep drawing, and die applications—making it the perfect industrial press solution. Key Advantages - High-rigidity four-column frame design - Independent stroke and tonnage adjustment for ram and cushion - Full control via touchscreen panel - High precision and repeatability - Long service life and low maintenance design Application Areas - Metal forming applications - Deep drawing operations - Die testing and production lines - Auxiliary pressing processes ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARINGS: Bronze Zr14 CAPACITY (RAM): 250 Ton CAPACITY (CUSHION): 80 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 900 mm WELDING STRESS RELIEF: Vibration stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT: 150 mm/sec FORMING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec CUSHION TABLE ADVANCE SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 360 mm – Ck45 CUSHION CYLINDER BORE: Ø 200 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units Nodpfx Absx N Um Robekt APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm LOWER TABLE HEIGHT FROM GROUND: 1300 mm MAIN FILL VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 16 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, širina mize: 1.000 mm, dolžina mize: 1.000 mm, razmak između stupova: 1.000 mm, sila umika: 70 t, hod: 800 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 200 / 70 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 200 / 70 ton four-column hydraulic deep drawing press is a high-rigidity hydraulic press solution designed for metal forming, deep drawing, and precision pressing applications. The ST52-grade steel welded frame undergoes stress relief by vibration to ensure long-term parallelism and perpendicularity tolerances during extended operations. The ram and cushion systems operate independently; stroke and pressure settings can be precisely controlled via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motors, and PLC control, the machine offers high efficiency and reliable operation. Maintenance requirements are minimized through the automatic lubrication system and electronic filter contamination warnings. With its 200 / 70 ton capacity, this model is the ideal industrial press solution for medium and heavy-duty metal forming, deep drawing, and die applications. Key Advantages - Rigid four-column press body - Independent stroke and tonnage adjustment for ram and cushion - Full control via touchscreen panel - High precision and repeatability - Long-lasting and low-maintenance design Fields of Application - Metal forming operations - Deep drawing applications - Die trial and production lines - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. induction-hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 200 tons CAPACITY (CUSHION): 70 tons DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 900 mm WELDING STRESS RELIEF: Vibration stress relief WELDING PRACTICE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT: 150 mm/s FORMING SPEED: 12 mm/s RETURN SPEED: 170 mm/s CUSHION TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 320 mm – Ck45 CUSHION CYLINDER BORE: Ø 190 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGING VALVE: NG 125 Nsdpfx Abjx N Umqobjkt HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 14.5 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, širina mize: 800 mm, dolžina mize: 800 mm, razmak između stupova: 800 mm, hod: 600 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 150/50 TON FOUR-POST HYDRAULIC DEEP DRAWING PRESS Njdpfxox N Ul Ts Abbekt General Description The CRONOSSTECH 150/50 ton four-post hydraulic deep drawing press is an industrial solution designed for metal forming, deep drawing, and precision pressing applications. It features a robust four-post rigid frame structure for enhanced stability and precision. Its St52-grade steel frame undergoes stress relief via vibration technology to maintain high parallelism and perpendicularity tolerances over extended operations. Ram and cushion systems operate independently, with precise stroke and pressure adjustments managed via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 efficiency class motors and PLC-based control, the press provides high efficiency, reliability, and long service life. An automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With a 150/50 ton capacity, this model is ideal for mass production, die test runs, and medium to high tonnage deep drawing operations. Key Advantages - Rigid four-post frame structure - Independent stroke and tonnage adjustment for ram and cushion - Complete control via touchscreen interface - High accuracy and repeatability - Low maintenance costs and long operational life Applications - Metal forming operations - Deep drawing applications - Die testing and production processes - Auxiliary pressing operations ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-Post FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 units, induction-hardened and chrome-plated SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 150 Ton CAPACITY (CUSHION): 50 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m RAM STROKE: 600 mm CUSHION STROKE: 200 mm MIN. DIE OPENING HEIGHT: 100 mm MAX. DIE OPENING HEIGHT: 700 mm WELDING STRESS RELIEF: Vibration method WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 18.5 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DOWN SPEED: 150 mm/s MOVABLE TABLE DRAWING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s CUSHION ADVANCE SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 280 mm – Ck45 CUSHION CYLINDER BORE: Ø 160 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROX. MACHINE HEIGHT: 3800 mm APPROX. MACHINE WIDTH: 1150 mm APPROX. MACHINE DEPTH: 1150 mm BED HEIGHT FROM FLOOR: 1200 mm PRE-FILL VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from the panel) RAM/CUSHION STROKE & TONNAGE SETTINGS: Adjustable via panel SYSTEM & PRESS STATUS MONITORING: Accessible via the touch panel DIE MEMORY: Adjustable via the panel LINEAR SCALE: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, širina mize: 800 mm, dolžina mize: 800 mm, razmak između stupova: 800 mm, sila umika: 40 t, hod: 600 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 100/40 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 100/40 ton four-column hydraulic drawing press is an industrial press solution with a four-column rigid frame, designed for metal forming, deep drawing, and precision pressing applications. The St52 grade steel construction frame undergoes stress relief via vibration. This structure ensures long-term preservation of high parallelism and perpendicularity tolerances. Ram and blank holder (pot) systems operate independently; stroke and pressure settings can be precisely controlled via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motors, and a PLC-controlled system, it delivers high efficiency, reliability, and long service life. The automatic lubrication system and electronic filter contamination alerts reduce maintenance requirements to a minimum. This model is an ideal solution for medium-scale serial production, die testing, and precision forming applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and blank holder - Full control via touchscreen panel - High precision and repeatability Nsdpfsx N Ulyjx Abbekt - Low maintenance cost and long service life Areas of Application - Metal forming operations - Deep drawing applications - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL FEATURES TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø90 – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARINGS: Bronze Zr14 CAPACITY (RAM): 100 Ton CAPACITY (POT/BLANK HOLDER): 40 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (POT): 200 mm MIN. DAYLIGHT OPENING: 100 mm MAX. DAYLIGHT OPENING: 700 mm WELDING STRESS RELIEF: Vibratory WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/s MOVING TABLE FORMING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s POT TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø230 mm – Ck45 POT CYLINDER BORE: Ø145 mm – Ck45 AUXILIARY BOOSTER CYLINDERS: 2 units APPROX. PRESS HEIGHT: 3500 mm APPROX. PRESS WIDTH: 1150 mm APPROX. PRESS DEPTH: 1150 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1200 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION: Automatic (configurable from screen) RAM / POT STROKE & TONNAGE ADJUSTMENT: Configurable from screen SYSTEM & PRESS STATUS DISPLAY: Viewable on screen DIE MEMORY: Configurable from screen LINEAR SCALE: NOVATECHNIK or TURCK PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 7.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 80 t, širina mize: 700 mm, dolžina mize: 700 mm, razmak između stupova: 700 mm, sila umika: 30 t, hod: 500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 80/30 Ton Four-Column Hydraulic Spinning Press General Description The CRONOSSTECH 80/30 ton four-column hydraulic spinning press is an industrial press solution designed for metal spinning, deep drawing, and die trial applications that require high precision. It features a rigid four-column body structure. The body is constructed from St52 grade steel, stress-relieved by vibration to ensure high parallelism and perpendicularity tolerances during pressing. The ram and die cushion systems operate independently; stroke and pressure settings can be precisely controlled from the operator panel. Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and PLC-controlled architecture, the press offers long life, safety, and energy efficiency. Maintenance requirements are minimized thanks to the automatic lubrication system and filter contamination alerts. This model is an ideal solution for small and medium batch production, die trials, and precision forming operations. Key Advantages - Rigid four-column press frame construction - Independent stroke and tonnage adjustment for ram and die cushion - Full control via touchscreen panel Njdpfx Abex N Ultsbjkt - High repeatability and accuracy - Low maintenance cost, long service life Application Areas - Metal spinning - Deep drawing operations - Die trials and prototype manufacturing - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs induction-hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 tons CAPACITY (DIE CUSHION): 30 tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 500 mm STROKE (DIE CUSHION): 150 mm MIN. DISTANCE BETWEEN TABLES: 100 mm MAX. DISTANCE BETWEEN TABLES: 600 mm STRESS RELIEVING: Vibration method WELDING APPLICATION: WPQR & WPS accredited by TÜRK-AK – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST APPROACH SPEED: 150 mm/sec MOVABLE TABLE SPINNING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec DIE CUSHION TABLE ADVANCE SPEED: 30 mm/sec MAIN CYLINDER BORE DIAMETER: Ø 200 mm – Ck45 DIE CUSHION CYLINDER BORE DIAMETER: Ø 125 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE MACHINE HEIGHT: 3300 mm APPROXIMATE MACHINE WIDTH: 1050 mm APPROXIMATE MACHINE DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1100 mm MAIN FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (Adjustable via screen) RAM / DIE CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Viewable via screen DIE MEMORY: Adjustable via screen LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 tons

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 60 t, širina mize: 700 mm, dolžina mize: 700 mm, razmak između stupova: 700 mm, sila umika: 20 t, hod: 400 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 60/20 TON FOUR-POST HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 60/20 ton four-post hydraulic deep drawing press is a robust and compact solution designed for precise metal forming, deep drawing, and spinning applications. The four-post construction ensures stable parallelism and perpendicularity tolerances are maintained throughout the pressing process. The frame is manufactured from St52 grade steel and undergoes stress relief treatment via vibration. The ram and blankholder systems are independently controllable; stroke and pressure adjustments can be set precisely via the touchscreen panel. Outfitted with REXROTH or PARKER brand hydraulic components, IE3 class motors, and an automatic lubrication system, it offers long-lasting, safe, and efficient operation. Operator errors are minimized with its PLC-controlled system. This model is an ideal solution for small and medium-scale spinning, deep drawing, die testing, and auxiliary pressing applications. Key Advantages - Rigid four-post press frame - Independent stroke and tonnage control for ram and blankholder - Adjustable system via touchscreen panel - High precision and repeatability - Low maintenance requirement, long service life Applications - Metal spinning operations - Deep drawing processes - Die testing and prototype productions Nkjdpfxjx N Ulgo Abbst - Metal processing and auxiliary production lines ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-Post FRAME MATERIAL: St52 – ERDEMİR POST DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 60 Ton CAPACITY (BLANKHOLDER): 20 Ton DISTANCE BETWEEN POSTS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 400 mm STROKE (BLANKHOLDER): 100 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 500 mm WELD STRESS RELIEF: Vibration stress relieving WELD APPLICATION: WPQR and WPS certified by TÜRK-AK, complies with EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/sec MOVING TABLE PRESSING SPEED: 12 mm/sec MOVING TABLE RETURN SPEED: 170 mm/sec BLANKHOLDER TABLE ADVANCE SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 175 mm – Ck45 BLANKHOLDER CYLINDER BORE: Ø 100 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3100 mm APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm PRE-FILL VALVE: NG 100 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from screen) RAM/BLANKHOLDER STROKE & TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Displayed on screen DIE MEMORY: Adjustable via screen LINEAR SCALE: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 5 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 40 t, širina mize: 700 mm, dolžina mize: 700 mm, razmak između stupova: 700 mm, sila umika: 15 t, hod: 400 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 40/15 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 40/15 ton four-column hydraulic deep drawing press is a compact and rigid press solution designed for precision metal forming, deep drawing, and hydroforming applications. The four-column frame construction ensures stable parallelism and perpendicularity tolerances throughout the pressing process. The press body is manufactured from St52 grade steel and subjected to stress relief through vibration. Both ram and cushion systems can be controlled independently, and stroke and pressure settings can be precisely adjusted via the touch panel. Equipped with REXROTH or PARKER branded hydraulic components, IE3 motor class, and an automatic lubrication system, the machine guarantees long-lasting, safe, and efficient operation. The user-friendly PLC-controlled structure minimizes operator errors. This model is an ideal solution for small and medium-sized deep drawing, forming, die testing, and precision press applications. Key Advantages - Rigid four-column press frame construction - Independent stroke and tonnage control for ram and cushion - System adjustable via touch panel - High precision and repeatability - Low maintenance requirements, long service life Areas of Application - Metal forming applications - Deep drawing operations - Die trial and prototyping - Metal processing and auxiliary production lines ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction-hardened and chrome-plated shafts SLIDE BEARINGS: Bronze Zr14 CAPACITY (RAM): 40 tons CAPACITY (CUSHION): 15 tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 400 mm STROKE (CUSHION): 100 mm MIN. CLEAR OPENING: 100 mm MAX. CLEAR OPENING: 500 mm WELD STRESS RELIEVING: Vibratory stress relief WELDING APPLICATION: WPQR and WPS certified by TÜRK-AK, complying with EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar Nkedpfx Aex N Uk Nsbbot TOTAL MOTOR POWER: 5.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/sec MOVABLE TABLE FORMING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec CUSHION TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER INTERNAL DIAMETER: Ø 145 mm – Ck45 CUSHION CYLINDER INTERNAL DIAMETER: Ø 90 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3100 mm APPROXIMATE PRESS WIDTH: 1050 mm APPROXIMATE PRESS DEPTH: 1050 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1000 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (Adjustable via the HMI) RAM / CUSHION STROKE AND TONNAGE SETTING: Adjustable via the HMI SYSTEM & PRESS STATUS MONITORING: Viewable on the screen DIE MEMORY: Adjustable via the HMI LINEAR POSITION TRANSDUCER: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 4.5 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 2.500 t, širina mize: 1.800 mm, dolžina mize: 2.600 mm, sila umika: 800 t, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Gib General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses are developed for heavy-duty deep drawing applications requiring very high tonnage, large bolster size, and precise blank holder force. The 8-gib H-frame body structure ensures high rigidity during pressing, maintaining parallelism and squareness tolerances throughout the long stroke during the ram and bolster movements. The CHSP 2500/800 model delivers maximum stability, controlled material flow, and repeatable production performance in large and deep drawing dies with its 2500-ton main ram and 800-ton blank holder capacity. The vibratory stress-relieved steel frame is designed for long-lasting and reliable operation under heavy industrial conditions. ⚙️ Standard Equipment Njdpfx Absx N Uk Aobjkt • Steel construction, 8-gib H-frame press body design • Vibratory stress-relieved body structure • Bronze Zr14 gib guides • WPQR and WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen panel • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter clog indicator • On-screen hydraulic unit oil temperature and system status monitoring • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Heavy-duty industrial safety systems 📐 Technical Specifications – CHSP 2500/800 Type: Steel construction, 8-gib H-frame press body Frame Material: St52 – ERDEMIR Gib Guide: Bronze Zr14 Capacity (Ram / Blank Holder): 2500 / 800 Ton Movable / Fixed Bolster: 1800 × 2600 mm Parallelism / Squareness: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 units) Blank Holder Cylinder: Ø450 mm – Ck45 (2 units) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approx. Weight: 132 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 2.000 t, širina mize: 1.500 mm, dolžina mize: 2.500 mm, sila umika: 600 t, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 2000/600 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses are engineered for heavy-duty deep drawing applications requiring very high tonnage, large table dimensions, and controlled blank holder pressure. With its 8-guide H-frame design, the press achieves maximum rigidity during the entire pressing operation, ensuring table and ram movements maintain parallelism and perpendicularity with consistent tolerances across the full stroke. The CHSP 2000/600 model offers precise control and repeatability for large-scale dies and demanding deep drawing and forming processes, with a 2000-ton main ram and 600-ton blank holder capacity. The welded steel frame is stress-relieved by vibration techniques, providing long-term reliability and durability under heavy industrial operation. ⚙️ Standard Equipment • Steel construction, 8-guide H-frame press body • Stress-relieved frame using vibration method Njdpjx N Ukvjfx Abbskt • Bronze Zr14 slide bearings • Welding applications certified according to TÜRK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touch panel interface • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning • Monitoring of hydraulic unit oil temperature and system status from the panel • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switching components • Industrial safety systems for operator protection 📐 Technical Specifications – CHSP 2000/600 Type: Steel construction, 8-guide H-frame press design Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram / Blank Holder): 2000 / 600 Tons Moving / Fixed Table: 1500 × 2500 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Clearance (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø720 mm – Ck45 (2 units) Blank Holder Cylinder: Ø390 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 105 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.500 t, širina mize: 1.500 mm, dolžina mize: 2.400 mm, sila umika: 500 t, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 1500/500 Nksdpjx N Ukisfx Abbot H-Type Hydraulic Deep Drawing (Drawing) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-Type hydraulic deep drawing presses are engineered to provide maximum frame rigidity, precise parallelism, and long-term operational reliability for deep drawing applications that require very high tonnage and large bolster areas. Thanks to the 8-guide H-frame press structure, ram and bolster movements are controlled and stable throughout the pressing process. The CHSP 1500/500 model has been developed for large-dimension dies, deep drawing, and controlled forming operations, with a main ram capacity of 1500 tons and a cushion capacity of 500 tons. The vibration-stress-relieved welded steel frame offers high strength and reliability for heavy-duty industrial conditions. ⚙️ Standard Equipment • Welded steel construction, 8-guide H-frame body • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen panel • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination alert • Display of hydraulic unit oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Industrial safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Type: Welded steel construction, 8-guide H-frame body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram / Cushion): 1500 / 500 Ton Moving / Fixed Bolster: 1500 × 2400 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Cushion): 1000 / 350 mm Daylight (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 units) Cushion Cylinder: Ø360 mm – Ck45 (2 units) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 87 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.200 t, širina mize: 1.500 mm, dolžina mize: 2.000 mm, sila umika: 400 t, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 1200/400 H-Type Hydraulic Deep Drawing Press – 8-Guided Slide General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered to ensure maximum rigidity, precision, and process control in sheet metal forming applications that require high tonnage. The 8-guided H-frame structure allows for stable maintenance of parallelism and perpendicularity tolerances even with large table dimensions. The CHSP 1200/400 model, featuring a 1200-ton main ram and a 400-ton blank holder capacity, is designed for heavy industrial applications that require deep drawing, forming, and controlled material flow. The vibration stress-relieved steel construction frame ensures long operational life and reliable performance. ⚙️ Standard Equipment • Steel construction, H-frame press body with 8 slide guides • Vibration stress-relieved frame structure • Bronze Zr14 slide bushings • Weld seams applied in compliance with WPQR and WPS certificates accredited by TURK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen control panel • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Industrial safety features for operator protection 📐 Technical Specifications – CHSP 1200/400 Type: Steel construction, H-frame press body with 8 slide guides Frame Material: St52 – ERDEMIR Slide Bushing: Bronze Zr14 Capacity (Ram): 1200 Ton Capacity (Blank Holder): 400 Ton Moving / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø560 mm – Ck45 (2 units) Blank Holder Cylinder: Ø450 mm – Ck45 Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 75 Ton Nkjdjx N Uirspfx Abbjt Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.000 t, širina mize: 1.500 mm, dolžina mize: 2.000 mm, sila umika: 350 t, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 1000/350 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description: The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting (ram + blankholder) system architecture, specifically designed for high tonnage sheet metal forming, deep drawing, and spinning applications. The robust 8-guideway H-frame construction delivers exceptionally high rigidity during pressing operations, maintaining stable parallelism and perpendicularity tolerances even on large bed dimensions. The CHSP 1000/350 model, offering a 1000-ton main ram and a 350-ton blankholder capacity, is particularly suited for deep drawing processes requiring controlled material flow in sectors like automotive, household appliances, defense, and heavy industry. The steel welded frame, stress relieved by vibration, ensures long service life and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-guideway H-frame press body • Stress-relieved frame via vibration • Bronze Zr14 guideway bearings • WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen HMI • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic lubrication system • Electronically-monitored filter contamination warning • On-screen monitoring of hydraulic oil temperature and system status • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switchgear components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guideway Bearings: Bronze Zr14 Nkedpjx N Uilefx Abbot Capacity (Ram): 1000 Tons Capacity (Blankholder): 350 Tons Moving / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Blankholder): 1000 / 350 mm Daylight (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 units) Blankholder Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC / HMI Panel: DELTA / DELTA 7” Approximate Weight: 65 Tons Note on Manufacturing: This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 800 t, širina mize: 1.500 mm, dolžina mize: 2.000 mm, sila umika: 270 t, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 800/270 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Sliding Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting (ram + cushion) working principle for high-tonnage metal forming, deep drawing, and spinning applications. The H-frame structure with 8 sliding guides ensures high rigidity, stable parallelism, and long die life even with large table sizes during pressing operations. The CHSP 800/270 model, featuring an 800-ton main ram and a 270-ton cushion capacity, has been developed specifically for processes in automotive, white goods, defense industry, and heavy sheet metal forming that require controlled material flow. The steel construction frame stress-relieved by vibration provides long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, H-frame body with 8 sliding guides • Frame structure with vibrational stress relief • Bronze Zr14 sliding bearings • Welding applications certified by TURK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) • PLC controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • Monitoring hydraulic oil temperature and system status via screen • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switchgear components • Safety systems for operator protection 📐 Technical Specifications – CHSP 800/270 Type: Steel construction, H-frame body with 8 sliding guides Frame Material: St52 – ERDEMİR Sliding Bearings: Bronze Zr14 Capacity (Ram): 800 Tons Capacity (Cushion): 270 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. / Max. Daylight: 100 / 1100 mm Nedpfjx N Uh Uex Abbjkt Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø390 mm – Ck45 (2 units) Cushion Cylinder: Ø370 mm – Ck45 Pre-Fill Valve: NG 200 PLC: DELTA Touch Panel: DELTA 7” Approximate Weight: 54 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 600 t, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 200 t, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Gibbed General Description Nksdex N Uhzjpfx Abbjt The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting design for controlled material flow in sheet metal forming, deep drawing, and forming operations. The 8-gibbed H-frame construction ensures maximum rigidity throughout the pressing cycle, maintaining parallelism and perpendicularity tolerances consistently along the full stroke length. The CHSP 600/200 model, featuring a 600-ton main ram and a 200-ton lower blankholder (cushion), is designed to provide full control over both die and workpiece during high-tonnage deep drawing and forming operations. The frame construction is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-gibbed H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 gib bearings - WPQR and WPS certified welded construction with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electrically monitored filter contamination warning - Hydraulic unit oil temperature and system status monitoring on display - Cooling system - Off-line filtration - Integrated safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 600/200 Type: Steel construction, 8-gibbed H-frame Frame Material: St52 – ERDEMİR Gib Bearing: Bronze Zr14 Capacity (Ram): 600 Ton Capacity (Cushion): 200 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress-relief Welding Process: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017, Supervised by certified “welding coordination engineers” as per EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Approach Speed: 150 mm/s Moving Table Forming Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Inner Diameter: Ø550 mm – Ck45 Cushion Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 5900 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2300 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Encoder: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 35 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 500 t, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 175 t, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Sheet Forming) Press – 8-Gib General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet forming, deep drawing, and metal forming applications. Thanks to its 8-gib H-frame structure, maximum rigidity is maintained throughout the pressing cycle; parallelism and perpendicularity tolerances are stably maintained over the full stroke. The CHSP 500/175 model is designed to provide precise control over dies and workpieces in high-tonnage deep drawing and forming applications, with a 500-ton main ram and a 175-ton cushion (blankholder) capacity. The frame construction is stress-relieved by vibration to ensure durable and reliable operation over a long service life. ⚙️ Standard Equipment - Steel construction, 8-gib H-frame press body - Vibration stress-relieved frame structure - Bronz Zr14 slideway bushings Nsdpfxex N Uhuj Abbokt - Welded manufacturing certified with WPQR and WPS approvals accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel display - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning system - On-screen monitoring for hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 500/175 Type: Steel construction, 8-gib H-frame press structure Frame Material: St52 – ERDEMİR Slideway Bushings: Bronze Zr14 Capacity (Ram): 500 Tons Capacity (Cushion): 175 Tons Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Minimum Daylight: 100 mm Maximum Daylight: 1100 mm Stress Relief: Vibration stress-relieving Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1:2017 (Welding applications are supervised by welding coordination engineers certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Fast Ram Down Speed: 150 mm/s Ram Forming Speed: 12 mm/s Ram Return Speed: 170 mm/s Cushion Forward Speed: 30 mm/s Main Cylinder Bore: Ø500 mm – Ck45 Cushion Cylinder Bore: Ø300 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5800 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 26 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 400 t, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 150 t, hod: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-gibbed H-frame structure provides maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the long stroke. The CHSP 400/150 model, featuring a 400-ton main ram and 150-ton blank-holder (pot) capacity, is designed for deep drawing and spinning applications requiring high tonnage. The machine frame is stress-relieved using vibration methods, ensuring long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-gibbed H-frame press body type - Stress-relieved frame by vibration - Bronze Zr14 slide bushings - Welds certified by TÜRK-AK accredited WPQR and WPS processes (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 400/150 - Type: Steel construction, 8-gibbed H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 400 tons - Capacity (Pot): 150 tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Stroke (Pot): 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding procedures supervised by "welding coordination engineers" certified to EN ISO 14731) - Max. Working Pressure: 250 bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Spinning Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Pot Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø450 mm – Ck45 - Pot Cylinder Bore: Ø280 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5600 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Bottom Table Height from Floor: 1400 mm - Pre-Fill Valve: NG 150 Nkodpox N Uhhjfx Abbot - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 24 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 100 t, hod: 800 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guide Nsdpfox N Uhbsx Abbokt General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting operation principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming (spinning) applications. The H-frame with 8 slide guides guarantees maximum rigidity during pressing, maintaining parallelism and squareness tolerances consistently over the full stroke length. The CHSP 300/100 model, with a main ram capacity of 300 tons and a blankholder (cushion) capacity of 100 tons, is engineered for high-tonnage deep drawing and forming operations. The frame construction is stress-relieved by vibration to provide long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically controlled filter contamination warning - Oil temperature and hydraulic system status display on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 300/100 - Type: Steel construction, 8-guide H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 300 Ton - Capacity (Cushion): 100 Ton - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Vibration stress-relieving - Welding Application: WPQR and WPS certified by TÜRK-AK; EN ISO 15614-1/2017 (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Descent Speed: 150 mm/sec - Moving Table Forming Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Forward Speed: 30 mm/sec - Main Cylinder Internal Diameter: Ø390 mm – Ck45 - Cushion Cylinder Internal Diameter: Ø230 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 4400 mm - Approximate Press Width: 3250 mm - Approximate Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Screen Panel: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 21 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 80 t, hod: 800 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Flow Forming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and flow forming applications. The H-frame structure with 8 guideways ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 250/80 model is designed for medium to high tonnage deep drawing and flow forming operations, featuring a main ram capacity of 250 tons and a lower cushion (pot) capacity of 80 tons. The frame construction is stress-relieved by vibration for long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame type press body - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - WPQR and WPS approved welding applications by TÜRK-AK accredited sources (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - Touchscreen operator panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic centralized lubrication system - Electronic filter contamination monitoring - Hydraulic unit oil temperature and system status monitoring via display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching materials 📐 Technical Specifications – CHSP 250/80 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guideway Bearings: Bronze Zr14 Capacity (Ram): 250 Tons Nksdpfx Asx N Uaqsbbot Capacity (Cushion): 80 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 800 mm Stroke (Cushion): 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS approved and TÜRK-AK accredited EN ISO 15614-1/2017 (Welding operations are supervised by “welding coordination engineers” certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/sec Moving Table Flow Forming Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Forward Speed: 30 mm/sec Main Cylinder Bore: Ø360 mm – Ck45 Cushion Cylinder Bore: Ø200 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Machine Height: 4200 mm Approx. Machine Width: 3250 mm Approx. Machine Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Measurement Ruler: NOVATECHNIK or TURCK PLC Control: DELTA Touchscreen Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approx. Weight: 18 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, širina mize: 1.000 mm, dolžina mize: 1.200 mm, sila umika: 70 t, hod: 800 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 200/70 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slide General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operating principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning operations. The 8-guided H-frame design provides maximum rigidity during the pressing process, maintaining parallelism and perpendicularity tolerances consistently along the stroke. The CHSP 200/70 model is designed for medium to high tonnage deep drawing and spinning applications, with a 200-ton main ram and a 70-ton cushion (blankholder) capacity. The frame construction is stress-relieved using vibration methods for long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Frame stress relief by vibration - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing conforming to CE standards - PLC-controlled hydraulic system Nkedsx N T U Tspfx Abbet - Touchscreen panel (DELTA 7”) - Adjustable ram and blankholder stroke control - Adjustable ram and blankholder tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 200/70 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 200 Tons Capacity (Cushion/Blankholder): 70 Tons Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 800 mm Cushion Stroke: 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress-relieved Welding: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding operations are supervised by certified "welding coordination engineers" in accordance with EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/sec Moving Table Spinning Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Forward Speed: 30 mm/sec Main Cylinder Internal Diameter: Ø320 mm – Ck45 Cushion Cylinder Internal Diameter: Ø190 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Machine Height: 3800 mm Approximate Machine Width: 2950 mm Approximate Machine Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-Fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Encoder: NOVATECHNIK or TURCK PLC Control: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 13.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, širina mize: 1.000 mm, dolžina mize: 1.200 mm, sila umika: 50 t, hod: 600 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow for sheet metal forming, deep drawing, and forming applications. Thanks to the 8-guided H-frame structure, maximum rigidity is maintained during pressing; parallelism and perpendicularity tolerances are consistently upheld throughout the stroke. The CHSP 150/50 model is specially engineered for precise and repeatable deep drawing operations, with a 150-ton main ram and a 50-ton cushion (die cushion) capacity. The frame construction undergoes stress-relieving via vibration, ensuring reliable and long-lasting performance. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press type - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding processes accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, 8-guided H-frame press type Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 150 Ton Capacity (Cushion): 50 Ton Movable Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Stroke (Cushion): 200 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 700 mm Stress Relief: Vibration stress relieving Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017. (Welding operations are supervised by "welding coordination engineers" certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/sec Movable Table Drawing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Cushion Table Forward Speed: 30 mm/sec Main Cylinder Internal Diameter: Ø280 mm – Ck45 Cushion Cylinder Internal Diameter: Ø160 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height of the Press: 3650 mm Nkodjx N T U Hspfx Abbjt Approx. Width of the Press: 2950 mm Approx. Depth of the Press: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 11 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, širina mize: 1.000 mm, dolžina mize: 1.200 mm, sila umika: 40 t, hod: 600 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to the 8-slideway H-frame structure, maximum rigidity is ensured throughout the pressing process and parallelism and perpendicularity tolerances are consistently maintained along the stroke. The CHSP 100/40 model is designed for precise deep drawing and spinning operations with a main ram capacity of 100 tons and a cushion (pot) capacity of 40 tons. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-slideway H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - WPQR and WPS certified welding by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 Type: Steel construction, 8-slideway H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 100 Ton Capacity (Cushion): 40 Ton Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Nsdpfx Abex N T Uyjbokt Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Stroke (Cushion): 200 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certified by TURK-AK EN ISO 15614-1/2017 (Inspected by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Inner Diameter: Ø230 mm – Ck45 Cushion Cylinder Inner Diameter: Ø140 mm – Ck45 Auxiliary Accelerating Cylinders: 2 units Approx. Press Height: 3400 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Ground: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 9 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.