Štirikolonska stiskalnica - Hidravlična

SICMI PSQ 300 A

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Pressing force 300 t Stroke 500 mm Distance between columns 1250x1000 mm Daylight opening 1000 mm Rapid approach speed 22 mm/s Working speed 2 mm/s Motor 7.5 kW Length 2000 mm Width 1500 mm Height 3300 mm 4-column guide Round ram guidance Table and ram with T-slots Two-hand operation Manual Ndedpfx Aevgncnjbnjd Siemens touchscreen control and new electrical control cabinet Up to 50 programs storable, programmable for: - Upward and downward stroke quantity - Dwell time at bottom dead center - Decompression time - Working pressure adjustment - Piece counter - Pre-stop for upward and downward motion - Selection between manual and automatic operation - Alarm and fault management

Stanje: dober (rabljeno), Leto izdelave: 2000, skupna višina: 47.000 mm, skupna širina: 27.000 mm, skupna dolžina: 25.000 mm, širina mize: 1.000 mm, dolžina mize: 1.800 mm, skupna masa: 43.000 kg, širina plošče bata: 600 mm, hod blazine orodja: 200 mm, Siemens Simatic OP 27 control system Nedpfstiwgijx Abnedd Sick light barrier Separate Rittal control cabinet Side walkways/access passages Floor-level installation

Stanje: rabljeno, Pressure 160 t Ndjdpeiulkqjfx Abnjd Passage width / mm Stroke / mm Working height 800 mm Total power requirement 15 kW Machine weight approx. 11.8 t - Table size: 1000x1000 mm - Distance between table and ram, large stroke at top, adjustment at top: 800 mm Additional information: Extendable table

Stanje: pripravljen za uporabo (rabljen), Hidravlična stiskalnica, štiristebrna stiskalnica, Eitel 100T Nsdpjuhl E Refx Abnodd Proizvajalec: EITEL Tlačna sila: 100 ton Skupne dimenzije: 1900 x 1100 x 3300 mm Dimenzije mize: 1050 x 800 mm Dolžina hoda: 400 mm

Stanje: rabljeno, Leto izdelave: 1993, Pressure: 250 t Stroke: 500 mm Distance between uprights: 1650 mm Lateral upright opening: 750 mm Installation height (stroke up): 1200 mm Table surface: 1650 x 1250 mm Blankholder force in table: 80 t Blankholder stroke in table: 250 mm Blankholder surface in table: 1070 x 780 mm Nsdpfxov Svb As Abnodd Table height above floor: 850 mm Ram surface: 1650 x 1250 mm Descending speed: from 10 mm/s Ascending speed: 80 mm/s Working speed: 10 mm/s Oil capacity: 400 l Drive power: 22.0 kW Weight: 21.5 t Space requirement (W x D x H): 2.7 x 2.3 x 4.25 m Height above floor: 4.0 mm Approved for manual loading according to German accident prevention regulations (UVV). With electro-hydraulic drive, pressure and stroke-dependent control, hydraulic blankholder in table, hydraulic cutting shock absorption (4x parallel-hold cylinders), hydraulic-mechanical depth stop, two-hand operation, hand lever operation.

Stanje: rabljeno, Leto izdelave: 2011, Pressure: 200 t Stroke: 900 mm Nsdpjv Svbvsfx Abnodd Upright spacing: 3520 mm Distance table/ram, max. stroke up, adj. up: 1400 mm Table area: 3500 x 1600 mm Ram area: 3500 x 1600 mm Lateral throat clearance: 1150 mm Return speed: from 500 mm/s Advance speed: 550 mm/s Working speed: 38 mm/s Oil capacity: 2000 l Drive power: 90.0 + 21.0 kW Weight: 34.00 t Space required (WxDxH): 4.4 x 3.3 x 5.5 m Approved for manual loading operations according to CE standard With electrohydraulic drive, pressure/time and stroke dependent control, cascading light barrier (Sick) at the front and rear, hydraulic ram locking, operation possible by up to 4 operators

Stanje: rabljeno, Leto izdelave: 1985, Pressure: 200 t Table length: 1500 mm Table width: 1200 mm Column gap: 1250 mm Stroke: 1150 mm Table surface: 1200 x 1500 mm Distance table/ram, stroke up: 1475 mm Table height above floor: 638 mm Ram surface: 1200 x 1500 mm Weight: 16.0 t Space requirements (W x D x H): 2.2 x 4.52 x 4.6 m with swivelling ram, extendable and tiltable table, ejector in table, spraying device in ram, ram locking via rack and pinion Ndedjvuul Ejpfx Abnsd

Stanje: novo, Leto izdelave: 2025, skupna višina: 4.000 mm, višina mize: 1.300 mm, skupna širina: 1.415 mm, skupna dolžina: 1.415 mm, stiskalna sila: 300 t, širina mize: 1.000 mm, dolžina mize: 1.000 mm, skupna masa: 18.000 kg, sila umika: 100 t, obratovalni tlak: 250 letvica, STANDARD FEATURES - Steel construction body and components relieved of stress/weld tension by vibration method - 8-sided slideways/bearings for high precision and long service life - PLC control and touch panel - Argon welding application for fastening elements and steel drawn tubes - EN ISO 15614-1/2017 welding procedure certification, approved by WPQR and WPS accredited by TÜRK-AK (Welding procedures are supervised by certified 'welding coordination engineers' according to EN ISO 14731) - Parallelism and perpendicularity tolerance implemented according to ISO and DIN Standards (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL: CHKSP 300/100 PRESSURE (TON): 300/100 STROKE (MM): 800 POT CYLINDER STROKE (MM): 250 TABLE–RAM DISTANCE (MM): 900 TABLE DIMENSIONS (MM): 1000x1000 RAM DIMENSIONS (MM): 1000x1000 PRESS DEPTH (MM): 1415 PRESS WIDTH (MM): 1415 FLOOR TO TABLE HEIGHT (MM): 1300 Ndedpfx Aevm U Uqsbnsd PRESS HEIGHT (MM): 4000 MAIN CYLINDER DIAMETER (MM): 390 POT CYLINDER DIAMETER (MM): 230 MOTOR POWER (KW): 30 PRESS WEIGHT (KG): 18000 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: 4 (FOUR) MONTHS FROM ORDER PRODUCTION AVAILABLE FROM 40 TONS TO 300 TONS.

Stanje: novo, The KP 100 A is a high-performance hydraulic press in the hydraulic press category and belongs to the H-frame hydraulic presses product group from KNUTH. This machine, manufactured in Europe, offers a pressing capacity of up to 100 t and is ideal for deep-drawing, forming, and punching applications. The robust steel construction ensures high rigidity and durability, while the T-slots on the ram plate and worktable allow for easy tool mounting. The mobile two-hand operation provides additional safety, and the adjustable limit switch enables precise adjustment of the stroke. Thanks to the integrated Siemens PLC and the maintenance-friendly hydraulic unit, the KP 100 A is suitable for both testing and series production. If you require customized solutions, you can request them at any time. Purchase the KP 100 A now, the powerful H-frame hydraulic press, to optimally meet your hydraulic press requirements. Nsdpfx Aexhdzfobnodd