Dvostolpna stiskalnica - hidravlična

SCHOEN NH/D 30S

Stanje: skoraj kot novo (rabljeno), 2-stebni hidravlični stiskalnik Pritisk: 200 t Zgornji hod: 500 mm Spodnji hod: 200 mm Skupne mere: 1800x2200x3700 mm Todeghl N Uepfx Abgef Moč: 10 KM Teža: 8,4 t

Stanje: rabljeno, Hydraulic Workshop Press, Broaching Press, Keyway Broaching Press Hydraulic Workshop Press, Custom built MaVo Type 5t-20 Previously used for broaching keyways in through-holes. Tedjwki Apspfx Abgof Press capacity: 5 tons (at 100 bar hydraulic pressure) Frame width: 770 mm Cylinder stroke: 220 mm Distance from piston rod thread to table traverse: max. 900 mm Ram downwards press speed: approx. 11.5 mm/sec (220 mm in 19 sec) Ram upwards press speed: approx. 24.5 mm/sec (220 mm in 9 sec) Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Two-hand operation (2 buttons for down, 1 button for up) - HAWE hydraulic pump, Type K5/3 (can deliver up to 400 bar, but the pump becomes very loud at this pressure) - Piston rod thread connection: M42 x 1.5 mm external thread - 1 piece screw-in extension approx. 290 mm for piston rod with M42 x 1.5 mm internal thread - 1 piece screw-in extension approx. 250 mm for piston rod with M42 x 1.5 mm internal thread - 2 pieces ram extensions for inserting into screw-in extension, lengths: 110 and 130 mm - 2 support plates - Very robust steel construction made of 140 mm double I-beam - Estimated load-bearing capacity of the steel frame: likely 40 tons or more - Movable with pallet truck Required space (L x W x H): 1200 x 930 x 2280 mm Weight: 485 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, Press force: 315.00 t Stroke: 500 mm Throat: 425 mm Daylight (table to ram, stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Speed down: 48 mm/s Speed up: 330 mm/s Working speed: 19 mm/s Oil volume: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Dimensions (W x D x H): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE standard. Equipped with oil-hydraulic drive, controllable dependent on pressure/time and stroke, front light curtain (Sick), Tedpfxjv Rwu Uj Abgsf two-hand operation.

Stanje: rabljeno, Leto izdelave: 1980, Pressure: 200 t Bending length: 3000 mm Frame gap: 2560 mm Installation height: 450 mm Throat depth: 450 mm Stroke adjustment: 240 mm Horn length over frame outside edge: 175 mm each Table length: 3050 mm Table width: 280 mm Table height above floor: 820 mm Electrical specification - Voltage/Frequency: 220/50 V/Hz Control: CYBELEC, DNC60 Stroke: 250 mm Operating pressure: 150 bar Machine weight approx.: 15 t Space requirements approx.: L: 4.0 x W: 3.2 x H: 3.44 m Hydraulic press brake, new control in 2005 - CYBELEC DNC 60, lower beam goes 500 mm into the floor, machine constructed with double-T-beams, Tsdpet Hllpofx Abgjf prism and upper beam in 3000 mm length,

Stanje: rabljeno, Leto izdelave: 1998, Press force 315 t Stroke 500 mm Throat depth 425 mm Tsdpfx Asvzxphebgsf Installation height 1000 mm Table size 1200 x 815 mm Table height above floor 800 mm Ram area 1100 x 700 mm Downward speed from 48 mm/s Upward speed to 330 mm/s Working speed 19 mm/s Oil capacity 1600 l Drive power 82.0 kW Weight 23.0 t Space requirement approx. 2.4 x 2.8 x 4.0 m (LxWxH) Approved for manual loading operations according to CE standard With oil-hydraulic drive, pressure/time and stroke-dependent control, front light curtain (Sick), two-hand operation

Leto izdelave: 1990, Stanje: skoraj kot novo (rabljeno), Kvalitetna WMW hidravlična stiskalnica s C-okom, 250 ton, naprodaj. Dimenzije mize stroja so približno 630 mm x 850 mm, odprtina (svetloba) znaša 300 mm. Tedsig Hzkopfx Abgef Stroj je opremljen s podložno ploščo debeline 150 mm, ki jo je mogoče odstraniti in tako povečati odprtino na 450 mm.

Stanje: rabljeno, Single-column hydraulic press HYDRAP model HPSK 25 Serial No. 6312 Year of manufacture: 1989 Pressing force: 25 tons Ram stroke: 500 mm Todpfxohrakvs Abgof Throat depth: 300 mm Daylight opening: 700 mm Table size: 1000 x 500 mm Table bore: Ø 210 mm Ram area: 400 x 360 mm Clamping pin bore: Ø 40 mm Table height above floor: 855 mm Approach speed (rapid traverse): 280 mm/sec Pressing speed: 3.5 mm/sec up to 25 mm/sec Return speed: 280 mm/sec Hydraulic tank capacity: 240 liters Drive power: 7.5 kW Mains connection: 400 Volt, 50 Hz - Operation and programming via SIEMENS S5 with OP1 control - Measuring system for stroke adjustment - Infinitely variable pressing speed adjustment via potentiometer - Manually adjustable, stepless pressure regulation via pressure regulator - Short-stroke function - Mechanical tool clamping on the ram with T-slots and clamping pin bore - Control cabinet with electrical control mounted on the machine - Two-hand operation and electrical connection for foot control - Control is prepared for electric tool monitoring - Hydraulic and electrical circuit diagrams included Space requirement (L x W x H): 1800 x 1200 x 2930 mm Weight: approx. 4 tons Good condition

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), Pressing force: 1600 kN, installation height: 750 mm, max. ram stroke: 500 mm, clamping area X/Y: 700 mm/600 mm, upright passage: 800 mm, lateral frame opening: approx. 450 mm. Distance from clamping plate to floor: 680 mm, ram bore diameter H7: 60 mm, rapid traverse down/up: 500/400 mm/s, max. working speed: 35 mm/s. Dimensions X/Y/Z: 2000 mm/1500 mm/3600 mm, weight: approx. 16,000 kg, control: Panelware. Documentation available. An on-site inspection is possible. Tsdpfxjttbd Ts Abgjf

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4290, skupna višina: 2.750 mm, vgradna višina: 500 mm, stiskalna sila: 30 t, širina mize: 440 mm, dolžina mize: 320 mm, hod: 300 mm, Completely overhauled Schoen double-column press, year of construction 1997/2024 Pressing force: 300 kN Installation height: 500 mm Stroke: 300 mm Table (W x D): 440 x 320 mm Tsdpou Hyx Sofx Abgsf The machine is being fully overhauled, including: new control system, new light curtain, and hydraulic system refurbishment.

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: nefunkcionalno, Prodajajo se naslednji deli iz stroja Chiron FZ 12 SM, letnik 1997: 9 kosov nosilcev za orodje Tjdpfsxdhp Eox Abgof 1 kos vreteno 1 kos motorja vretena