Stiskalnica - hidravlična

MENGELE D 200 / 25

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Todpot Hwt Sjfx Aiqsc Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more

Stanje: novo, Leto izdelave: 2023, Welding turntable, vessel rotator 6000 kg load capacity Digital display with foot control Tjdpok Adl Hjfx Aiqec Diameter range: 180 mm to 3500 mm Drive roller diameter: 300 mm Dimensions: Length: 1900 mm x Width: 470 mm x Height: 390 mm Infinitely variable speed: 200 - 1800 mm/min.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, - Leistung (kW): KFB 353 = 1,5 - Spannung (V): 400 - Luftdruck (bar): 7 - Luftverbrauch (l/min): mind. 250 - Drehzahl der Welle (min⁻¹): KFB 353 = 12.000 - Maximale Werkstückquerschnitt WxH (mm): 190 x 111 - Fräsbereich L x B (mm): 300 x 130 Tjdpfjwzivdox Aiqec - Frästiefe (mm): 200 - Maschinenabmessungen L x T x H (mm): 3.500 x 820 x 1.650 - Gewicht (kg): ca. 420 - Bearbeitbares Material: KFB 353 = PVC- und Aluminiumprofile

Stanje: novo, Leto izdelave: 2025, Automatic powder filling and lid sealing machine for small containers such as coffee capsules. - Suitable for filling powdery products (coffee, coffee blends, drinking chocolate, milk powder, etc.) into various capsule-shaped container sizes/forms (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, with/without filter, etc.) followed by sealing. Automatic filling and dosing using an auger filler. UV sterilization system, ionizer, and dust extraction system for the tray formats included. Automatic film feeding and dual heat sealing of the lid. Specifications: - Max. idle speed: 55 cups/minute - Filling range: 0-20g - Filling accuracy: +/- 0.15g - Hopper capacity: 5L (approx. 3kg powder) - Power supply and consumption: 220V, 1.5kW - Required compressed air and flow rate: 6-8 bar, approx. 300L/min Todpfxsv Nkzxs Aiqsc - Protective gas flow rate: approx. 200L/min - Machine dimensions: L1900 x W1118 x H2524mm - Weight: 800kg. Specifications refer to Nespresso capsules; deviations may occur with capsules from other brands. Please note that our new prices are often below the usual prices for used machines. Feel free to send us your enquiry and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with full warranty.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2007, I - jeklo - ploska 50 x 10 mm I-jeklo - navpično 80 x 15 mm Kotno jeklo 50 mm Okrogel material 30,0 mm Premer cevi, maks. 1 1/2" mm Polni material - premer 30,0 mm Teža 185 kg Dimenzije D-Š-V 670 x 530 x 1350 mm Kvadratni material 40 x 40 x 3 mm Cevi 60 x 2,0 mm Debelina osi 30 mm Skupna potrebna moč 0,75 kW Predstavitveni model Oprema: - stroj - podnožje - nožni stikalo - standardni valji (razdeljeni) - omogočeno horizontalno in vertikalno upogibanje Tsdpst U R H Uefx Aiqec - stroj ima samo en pogon (levo-desno gibanje)

Stanje: dober (rabljeno), Leto izdelave: 1988, Upogibni stroj, abkant stroj, nihajni upogibni stroj, stiskalnica za upogibanje. - Predaja: v trenutnem stanju, kot je bilo ogledano, glejte slike - Delovanje: ročno upravljanje (brez avtomatskega načina) - Proizvajalec: RAFAMET nihajni upogibni stroj Tip KM-4 - Pogon: mehanski - Največja delovna širina: 2020 mm Tedpfx Aijv Tpxqoqoc - Največja debelina pločevine: 4 mm - Globina odbojnika: 750 mm - Priključna moč: kW - Dimenzije: 3350/1540/H1510 mm - Teža: 3900 kg

Leto izdelave: 2025, stanje: novo, Automatic powder filler and lid sealer for small containers such as coffee capsules. Todpfov Nkz Esx Aiqoc - Suitable for filling powdered products (coffee, coffee blends, drinking chocolate, milk powder, etc.) into various capsule-shaped container sizes/forms (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, with/without filter, etc.) with subsequent sealing. Automated filling and dosing via auger doser. UV sterilization system, ionizer, and dust extraction system for cavity formats included. Automatic film feed and double heat sealing of the lid. - Specifications: • Maximum idle speed: 90 cups/minute • Filling range: 0-20g • Filling accuracy: +/- 0.15g • Hopper capacity: 10L (approx. 6kg powder) • Power supply and consumption: 3-phase, 220V, 7.5kW • Required compressed air and flow rate: 6-8 bar, approx. 300L/min • Protective gas flow rate: approx. 200L/min • Machine dimensions: L3420xW2200xH2688mm • Weight: 900kg The specifications refer to Nespresso capsules; deviations may occur with capsules from other brands. Please note that our new prices are often lower than typical used equipment prices. Feel free to inquire and share your packaging requirements with us. – We generally have 30–50 different new machines immediately available from stock. For machines requiring customer-specific manufacturing, we offer very short delivery times starting from around 3 weeks. – All machines are available with a full warranty.

Leto izdelave: 2025, stanje: novo, Standard configuration with column Tjdpfxegn Tzle Aiqsc Motorized height adjustment 700 mm Articulated arm length 2x 1,100 mm Height adjustment of grinding spindle 130 mm Grinding motor 5.5 kW Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and installation template Grinding tools available as options Request more information

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Container Rotator with 10 Ton Load Capacity - Infinitely variable speed control - Hand and foot remote control - Suitable for diameters from 320 mm to 2,800 mm - Roller diameter: 300 mm - Speed: 6 - 60 m/h - Power: 2 x 0.55 kW Tedpfjd Nmx Tex Aiqsc

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Tedpfx Aouiy Ngjiqsc Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training