Hidravlične dvostebrične preše in štiristebrične preše nakup rabljenega (311)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
Stroji za obdelavo kovin in orodjarne strojne opreme Stiskalnice za kovino Hidravlične dvostebrične preše in štiristebrične preše
mali oglas

729 km
Hidravlična ravna stranska stiskalnica
Hans SchoenUTE FF 300
Klic
Leto izdelave: 2000, Stanje: zelo dobro (rabljeno), Pressure: 300 tons
Distance between uprights: 1800 mm
Side passages: Yes
Installation height: 1000 mm
Table: 1800 x 1000 mm
Ram: 1800 x 1000 mm
Stroke: 600 mm
Ledpfxjgbvkvo Ah Dsah
Weight: 43 tons
Height: 4700 mm
Siemens S7 control system
Floor-level installation
Sick light curtain
Draw cushion: Stroke 200 mm
mali oglas

523 km
Hidravlična stiskalnica
Baliv HungaryD2430
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BH2020/0020, stiskalna sila: 60 t, Oprema: varnostna svetlobna zapora, Na predaj: Repasovaný hydraulický lis – D2430 A (600 kN)
Ponúkame na predaj hydraulický lis D2430 A, ktorý bol v roku 2020 plne repasovaný. Stroj je vo výbornom technickom stave a aktuálne sa nachádza v Hajdúnánási, Maďarsko.
Technické parametre:
• Nominálna lisovacia sila: 600 kN
• Celková hmotnosť: 2 000 kg
• Výkon motora: 7,5 kW
• Napájacie napätie: 400 V AC
• Riadiace napätie: 24 V DC
• Rok repasácie: 2020
• CE certifikát
Ďalšie informácie:
• Projekt realizovala spoločnosť Balliv Hungary Kft.
• Pôvodne inštalované pre Innovatív Térburkolatfejlesztő Kft.
• Stroj je vybavený obojručným ovládaním a bezpečnostnými krytmi pre bezpečnú prevádzku.
• Ideálny na lisovanie, tvárnenie alebo priemyselné tvarovanie.
⸻
💡 Nakládka: EXW (zo závodu) – Za nakládku a prepravu zodpovedá kupujúci.
Lsdpfxjw Ic T Ie Ah Deah
📍 Miesto stroja: Hajdúnánás, Maďarsko
📩 Pre ďalšie informácie, fotografie alebo dohodnutie obhliadky nás kontaktujte.
mali oglas

226 km
Hidravlične dvokolonske stiskalnice
KK KletzerHydraulische Doppelständerpresse 250 to
Klic
Stanje: novo, Stroke length (max.): max. 400 mm
Table height: Floor to top of table 900 mm
Ljdpfxegta Rce Ah Djah
Installation height: 600 mm
Speeds: Advance 120 mm/sec, Pressing 13 - 4 mm/sec, Return 170 mm/sec
Pump capacity: 103 L/min (REXROTH axial piston pump)
Motor: 22 kW - 1500 rpm
Dimensions (LxWxH): 2000 x 3200 x 4300 mm
Weight approx.: 10,000 kg
Oil filling: 700 L
Hydraulic double-column press 250 t KK Kletzer
Capacity: 250 Tonnes (at 245 BAR)
Operation: Via key switch
- Manual/setup mode with two-hand operation, without light curtain
- Automatic mode with two-hand operation, full speed with light curtain
Main cylinder: Ø 350 mm
Auxiliary cylinders: 2 pcs. Ø 80 x 60 mm
Motor: 22 kW – 45 hp
Pump: 103 L/min REXROTH – axial piston pump
Speed: Advance 120 mm/sec, Pressing 13 – 4 mm/sec, Return 170 mm/sec
Clear opening: 1100 mm
Table plate: 1000 x 1000 mm, T-slotted
Ram plate: 1000 x 1000 mm, T-slotted & spring welds
Installation height: 600 mm (max. distance between table & ram plate)
Stroke length: max. 400 mm
Table height: 900 mm (floor to top of table)
Hydraulics:
- Block & valves (REXROTH) (hydraulic accessories mounted on top of press)
- Pre-fill valve
- Hydraulic & mechanical ram safety
- Pressure adjustment via PLC (min. pressure 35 t)
- Speed adjustment via PLC
- Pressure holding valve for 600 sec.
- Air cooler (temperature adjusted via screen)
- Automatic lubrication for guides (adjustable via screen)
- Sides of working area enclosed with sheet metal
- Guide rails for parallelism
- Auxiliary motors: 5.5 kW + 2.2 kW
- Auxiliary pumps: 22 cc + 5.5 cc
- Safety railing around hydraulics and side ladder
- Oil tank: 800 liters
- Oil quantity: approx. 700 liters
Control system:
- SIEMENS S7-1200
- Main switch cabinet
- Movable control panel
- Soft starter for motor
- Safety PLC: SICK
- PLC display 9’’ Siemens
- Two-hand operation (movable)
- Linear scale for stroke adjustment 450 mm – NOVOTECHNIK
- Light sensor front & rear of working area – SICK 900 + 150 mm
- SECOME & Ethernet connection for remote maintenance – Siemens
- Dual workspace lighting
- 8 free I/Os on PLC
- Automatic pressure compensation for oil loss
Documentation:
- Operating manual in German
- Hydraulic circuit diagrams
- Control schematics
The price stated is approximate, as steel prices are subject to change.

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
mali oglas

589 km
Hidravlična stiskalnica
Hochstein
Klic
Stanje: rabljeno, Funkcionalnost: nepreverjeno, Preša s hidravličnim agregatom naprodaj
Ljdpfx Aew Izrieh Dsah
mali oglas

328 km
Hidravlična stiskalnica
HidroliksanHCFP 110t
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: K100UT22-03, vgradna višina: 1.000 mm, stiskalna sila: 100 t, skupna masa: 5.000 kg, razmak između stupova: 1.000 mm, hod: 500 mm, moč: 18,5 kW (25,15 KM), Oprema: varnostna svetlobna zapora, Pracovní tlak: 1000 kN
Zdvih pístu: 500 mm
Přísunová rychlost: 25 mm/s, Zpětná rychlost: 35 mm/s, Pracovní rychlost: 3–10 mm/s
Pracovní stůl – prostor mezi rámy: 1100 × 700 mm
Přibližné rozměry (d × š × v): 1,5 × 2,5 × 4,0 m
Laedpfjtpwu Eex Ah Doh
NC řízení HMI Beijer, ovládání polohy horního a spodního pístu, tlaku a rychlosti. Paměť programů.
Manuální režim je určen především pro ustavení nástroje. Pohyby jsou ovládány tlačítky.
RÁM:
• Svařovaný ocelový rám
• CNC obráběné pracovní stoly a rám stroje
• Automatické mazání vodicích lišt beranu
• T-drážky na míru dle specifikace zákazníka
OVLÁDACÍ PANEL:
• HMI dotykový displej Beijer 10“
• Siemens S7 PLC
• Regulace tlaku a rychlosti
• Paměť programů
• Vzdálený přístup pro servisní podporu
• Joystick pro jemné nastavení
HYDRAULICKÝ SYSTÉM:
• Hydraulické komponenty Bosch Rexroth
• Hydraulický přetlakový ventil
• Proporcionální ventil pro regulaci rychlosti
• Proporcionální ventil pro regulaci tlaku
• Vzduchové chlazení
mali oglas

835 km
Hidravlična stiskalnica
MecamaqDoppelständerpresse DM100R-5393
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Technical Data PDM100R-5393
Performance [Tm]: 100
DIMENSIONS OF LOWER PLATE [mm]: 900x600
DIMENSIONS OF UPPER PLATE [mm]: 850x550
GUIDE COLUMNS (x4) [Ø mm]: 50
WORKING HEIGHT [mm]: 950
MAX. OPENING [mm]: 600
STROKE [mm]: 420
IDLE SPEED [mm/s]: 50–230
WORKING SPEED [mm/s]: 2–15
WEIGHT [kg]: 3000
SERVO POWER – PDM100R
The new SERVO hydraulic units from Bosch Rexroth are designed to increase productivity and reduce energy consumption by up to 80% during downtime, tool changes, and between cycles.
Enhanced efficiency in operation!
Ledpfx Aeq Ula Roh Deah
EQUIPMENT
- Proportional p/Q control with Bosch Rexroth SvP5020
- Adjustable speed settings via PLC
- AOPD light curtain technology
- 12" LCD display
- Configurable working parameters via PLC
- 50 pre-stored programs available on the PLC
- Pre-filled valves for high-speed operation
- Maintenance-free bronze graphite bushings
- Simplified hydraulic unit design to minimize maintenance work.
mali oglas

1.228 km
Hidravlična stiskalnica
Hidrogarne250 T 4-Säulen Tiefziehpresse MV-250E/NC
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MV-250E/NC, stiskalna sila: 250 t, širina mize: 2.500 mm, dolžina mize: 1.150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, HYDRAULIC FOUR-COLUMN PRESS FOR DEEP DRAWING APPLICATIONS
TECHNICAL DATA
Press force / main cylinder T: 250
Press force cushion T: 50
Motor power kW: 11
Piston stroke mm: 500
Approach speed mm/s: 80
Working speed mm/s: 7
Return speed mm/s: 105
Column diameter mm: 150
Max. pressure Bar: 260
Usable table surface mm: 2,500 x 1,150
Column distance mm: 2,500 x 700
Max. daylight opening mm: 1,000
Cushion size mm: 950 x 750
Working height mm: 1,100
Overall height mm: 3,650
Lasdpfx Ahowkucho Djh
Weight kg: 15,000
The hydraulic four-column press MV-250E/NC belongs to the M/NC series and has been specially designed for higher precision and capacity, particularly for deep drawing operations.
Equipped with an upper and lower table made of C45E steel, both fitted with DIN-650 T-slots to ensure minimal friction during the vertical movement of the upper table. Maintenance-free bimetallic bushings and perfectly parallel guidance via four chrome-plated and ground cylindrical columns further enhance performance.
An optimized hydraulic system operates at pressures below 290 bar, ensuring long service life and reliable operation.
The machine meets all essential safety and health requirements in accordance with CE regulations.
STRUCTURE AND TABLES
• Consists of three electro-welded blocks, made exclusively from S355JR steel.
• Stabilized and machined at the end of the welding process to guarantee perfect parallelism and precision.
• Designed and calculated using finite element software.
• The lower table incorporates a 50-tonne hydraulic cushion with a useful area of 950 x 750 mm and three front tool support brackets for supporting tools outside the press.
• Features an integrated SIEMENS KTP-400 NC for stroke control of the upper table, speed changes, and cushion regulation.
• Includes a SIEMENS S-7 PLC, allowing for the programming of 99 memory settings.
CYLINDER AND HYDRAULIC SYSTEM
• Single-acting cylinder with honed liner, chrome-plated piston, and wear-resistant guides.
• Entire hydraulic unit mounted on the upper section of the press.
• Hydraulic system includes a low-noise Denison hydraulic pump and an air-oil cooler.
• Contains:
- Decompression system
- Pressure solenoid valves
- Pre-fill valves
- Pilot-operated check valves
- Non-return valve
- Pressure relief valve
- Load-holding safety valve
ELECTRICAL INSTALLATION AND SAFETY
• Equipped with a SIEMENS SIMATIC S7 1200 safety PLC and a 4-inch KTP-400 touchscreen on the control panel. Enables programming of semi-automatic and automatic modes, power, stroke, and dwell time. Recipe storage for up to 99 setups, each able to program all aforementioned parameters.
• The electrical control panel features a selector switch to choose the operating mode: manual "setup" or automatic cycle "production".
• Machine operation is via electrical low-voltage foot pedals.
• Safety equipment includes: front area light curtain (Category IV), two fixed side guards, and one rear interlocked guard with magnetic safety switch.
mali oglas

523 km
Hidravlična stiskalnica
HarsleY27-200T
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 019165, stiskalna sila: 200 t, Oprema: varnostna svetlobna zapora, Y27 serije – Glavne značilnosti:
Laedew Ic Tnepfx Ah Djh
1. Nizka poraba energije in visoka stopnja zatesnitve zmanjšujeta stroške proizvodnje.
2. Enostavna konstrukcija in enostavno upravljanje.
Neodvisen električni nadzorni sistem, zanesljivost in enostavno vzdrževanje.
3. Popolna varnostna zaščita ter zmanjšanje hrupa zagotavljata kakovostno delovno okolje.
Štiri-stebrna hidravlična stiskalnica (4-stebrna ali štiristebrična hidravlična stiskalnica) je vrsta hidravličnega stroja, ki se uporablja v številnih industrijah za širok nabor aplikacij, vključno z oblikovanjem kovin, kovanjem, prebijanjem, globokim vlečenjem in postopki preoblikovanja. Ta tip stiskalnice je prepoznaven po robustni in stabilni konstrukciji, zaradi česar je primeren za zahtevnejše in visoko-tlačne operacije.
Glavne značilnosti:
Štirje vertikalni stebri: Najznačilnejša lastnost štiri-stebrne stiskalnice so štirje vertikalni stebri, razporejeni v pravokotnik ali kvadrat. Ti stebri zagotavljajo konstrukcijsko stabilnost in podporo zgornji ter spodnji plošči stiskalnice, kar omogoča natančne in ponovljive rezultate pri postopkih stiskanja.
Hidravlični sistem: Stroj poganja hidravlični sistem, ki zagotavlja silo, potrebno za stiskanje ali oblikovanje materialov. Hidravlični sistem vključuje hidravlično črpalko, cilindre, ventile ter rezervoar za hidravlično olje.
Nastavljiva dolžina hoda: Veliko štiri-stebrnih hidravličnih stiskalnic omogoča nastavitev dolžine hoda, s čimer operater uravnava globino spusta zgornje plošče. Ta funkcija je ključna za različne obdelovance in postopke oblikovanja.
Nadzor tlaka: Operater lahko nastavlja hidravlični tlak in doseže želeno silo pri obdelavi. Tlak se prilagodi glede na zahtevane lastnosti materiala in operacije.
Varnostne funkcije: Varnost je bistvenega pomena pri delu s hidravličnimi stiskalnicami. Stroji so opremljeni z varnostnimi elementi, kot so gumbi za izklop v sili, dvoročni nadzor in zaščitne ograje, ki ščitijo operaterja pred nesrečami.
mali oglas

226 km
Hidravlične dvokolonske stiskalnice
KK KletzerHydraulische Doppelständerpresse 150 to Sonderausf
Klic
Stanje: novo, Stroke length (max.): max. 400 mm
Table height: Floor to upper edge of table top 850 mm
Installation height: 600 mm
Speeds: Approach 120 mm/s, Pressing 13 - 4 mm/s, Return 170 mm/s
Output: 65 L/min (REXROTH axial piston pump)
Motor: 15 kW – 1500 RPM
Dimensions (LxWxH): 2,100 x 2,400 x 4,300 mm
Weight approx.: 11,000 kg
Capacity: 1500 kN (150 tons – at 245 BAR)
Operating Mode Selection: Via key switch
- Manual / setup mode via two-hand operation without light curtain safety on front (always active at rear)
- Automatic via two-hand operation at full speed (with active light curtain safety)
Main cylinder: Ø 270 mm
Auxiliary cylinders: 2 pcs. Ø 70 x 50 mm
Motor: 15 kW – 1500 RPM (IE-3)
Pump: 45 cc – 65 L/min – REXROTH axial piston pump
Speeds: Approach 120 mm/s – Pressing: 13 – 4 mm/s – Return 170 mm/s
Clear width: 1300 mm
Worktable: 1200 x 800 x 90 mm – with T-slots
Ram plate: 1200 x 800 x 600 mm – with T-slots & ribbed reinforcement
Installation height: 600 mm (max. distance between table & ram plate)
Stroke length: max. 400 mm
Table height: 850 mm (floor to upper edge of table top)
Hydraulics: (Hydraulic accessories mounted on top of press)
Control block & valves (REXROTH proportional valves)
Pre-fill valve (NG.125)
8-fold guide system
Hydraulic ram safety
Mechanical ram safety for upper dead center position
Pressure adjustment via PLC
Speed adjustment via PLC
Pressure hold valve for 600 sec
Air cooler
Automatic lubrication for guideways
Auxiliary motor
Auxiliary pump
Laedpfempfwdsx Ah Deh
Control System:
Main control cabinet (mounted laterally to press frame)
Swiveling control panel
SIEMENS S7-1200
KTP 9” SIEMENS touchscreen (language selection DE/ENG)
Safety PLC (SICK)
Light curtain for front & rear of working area (SICK 750 + 150 mm)
Soft starter
Movable two-hand control
SECOMEA Ethernet connection
Linear encoder for stroke adjustment (450 mm – NOVOTECHNIK 16 bit)
Work area lighting (2x, IP66)
- 8 free I/O ports at PLC for external connections
-----
- Safety rail around hydraulic unit
- Side access ladder
-----
Documentation: Operator manual GERMAN (1x paper, 1x USB),
Hydraulic & control diagrams
Parts lists
CE certificate
Standard: EN 16092/1/3
-----
Overall dimensions: approx. 2400 x 2100 x 4100 mm Total weight: approx. 11,000 kg
Paintwork: frame RAL 7035 light grey
mali oglas

1.244 km
100/40 TONSKA HIDRAVLIČNA STISKALNICA ZA VLEČENJE STEBROV
CRONOSSTECHCHKSP 100/40
Klic
Stanje: novo, Leto izdelave: 2024, stiskalna sila: 100 t, širina mize: 800 mm, dolžina mize: 800 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF ORIGIN: TURKEY
WARRANTY PERIOD: 24 MONTHS
Ljdpfovkvu Tex Ah Deah
DELIVERY TIME: READY STOCK
TECHNICAL SPECIFICATIONS FOR 100/40 TON COLUMN-TYPE HYDRAULIC DEEP DRAWING PRESS
TYPE: 4-COLUMN
COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts
RAM CAPACITY: 100 TON
POT CAPACITY: 40 TON
DISTANCE BETWEEN COLUMNS: 800 x 800 mm
USABLE WORKING AREA: 800 x 1100 mm
PARALLELISM TOLERANCE: 120 micron/meter
PERPENDICULARITY TOLERANCE: 60 micron/meter
RAM STROKE: 600 mm
POT STROKE: 200 mm
MINIMUM GAP: 100 mm
MAXIMUM GAP: 700 mm
STRESS RELIEF: Vibratory stress relieve
WELDING APPLICATION: EN ISO 15614-1/2017 certified welding application, accredited by TÜRK-AK and approved according to WPQR and WPS. (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731.)
PROPORTIONAL SPEED APPLICATION: System is designed with proportional speed feature. Different speed and stop values can be entered at various points of the pressing process to minimize the effects of material and die deformation on the operation.
MAX OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 15 kW – IE3
MAIN PUMP: 23 cm³ – VICKERS
MOVING TABLE FAST DESCENT SPEED: 150 mm/sec – Proportionally Adjustable
MOVING TABLE DEEP DRAWING SPEED: 15 mm/sec – Proportionally Adjustable
MOVING TABLE RETURN SPEED: 150 mm/sec – Proportionally Adjustable
POT TABLE ADVANCE SPEED: 30 mm/sec – Proportionally Adjustable
POT TABLE RETURN SPEED: 70 mm/sec – Proportionally Adjustable
MAIN CYLINDER BORE: Ø 220 mm – Ck45
POT CYLINDER BORE: Ø 140 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: Ck45 – 2 pcs
APPROX. HEIGHT OF PRESS: 3900 mm
APPROX. WIDTH OF PRESS: 1110 mm
APPROX. DEPTH OF PRESS: 1110 mm
DISTANCE OF LOWER TABLE FROM FLOOR: 1100 mm
HYDRAULIC UNIT: VICKERS
COOLING SYSTEM (with fan): CIESSE
LEVEL INDICATOR: DONALTSON
AIR FILTER: CIESSE
RETURN FILTER: DONALTSON
OIL & TEMPERATURE GAUGE: DONALTSON
VALVES USED: EATON
FILTER CONTAMINATION WARNING: ELECTRONIC CONTROLLED
LUBRICATION SYSTEM: AUTOMATIC (ADJUSTABLE VIA SCREEN)
RAM STROKE ADJUSTMENT: ADJUSTABLE VIA SCREEN
POT STROKE ADJUSTMENT: ADJUSTABLE VIA SCREEN
RAM TONNAGE (PRESSURE) SETTINGS: ADJUSTABLE VIA SCREEN
POT TONNAGE (PRESSURE) SETTINGS: ADJUSTABLE VIA SCREEN
SYSTEM ERROR INFORMATION: DISPLAYED ON SCREEN
PRESS STATUS INFORMATION: DISPLAYED ON SCREEN
DIE MEMORY: ADJUSTABLE VIA SCREEN
HYDRAULIC UNIT OIL TEMPERATURE INFO: DISPLAYED ON SCREEN
LINEAR SCALE: NOVATECHNIK or TURCK
PLC APPLICATION: DELTA
TOUCH PANEL SCREEN: DELTA 7''
SWITCHGEAR: SIEMENS – SCHNEIDER
SAFETY PLC: PILZ PNOZ MULTI
LIGHT CURTAINS: LEUZE – 2 units
APPROX. WEIGHT: 5.5 TON
mali oglas

767 km
Hidravlična stiskalnica
EITELEP160
Klic
Stanje: rabljeno, Leto izdelave: 1999, Lift height 650 mm
Machine No.: 1417
Cylinder diameter 250 mm
Laedewzyudspfx Ah Dsh
Machine weight approx. 3.4 t
mali oglas

640 km
Hidravlična stiskalnica
MÜLLER WEINGARTENZE 1001 / 800
Klic
Stanje: rabljeno, Leto izdelave: 1970, Pressure: 1000 t
Gap width: 5000 mm
Stroke: 500 mm
Center height: 400 mm
Machine dimensions: 6000 x 2500 mm
Weight: 1000 kg
Center distance: 3500 mm
Lajdpfswwl R Asx Ah Doh
Machine weight approx. 220 t
Hydraulic 1,000 ton press
Table size: 3500 x 2200 mm
Distance between table and ram: min. approx. 400 mm / max. approx. 1580 mm
Drawing cushion in the table with 500 mm stroke and 300 ton counterforce
External dimensions approx. 6000 x 2500 mm
Height approx. 8500 mm (above floor level)
Pit depth (for hydraulics and other units): approx. 5000 mm
Total weight approx. 220 t; the heaviest single part is the head piece
at approx. 64 t
Siemens control system
As it is equipped with a cutting shock absorber, the machine can also be used
for punching (cutting). The side columns have passages of
approx. 1,100 mm width. Thus, punching tools can be supplied with strip material
from both sides.
Technical data – see images
mali oglas

1.228 km
Hidravlična stiskalnica
Hidrogarne/GarnetMV-1000/NC SINCRO
Klic
Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna višina: 7.000 mm, skupna širina: 4.750 mm, skupna dolžina: 6.000 mm, stiskalna sila: 1.000 t, hitrost vzvratne vožnje: 60 mm/s, We are offering a new build of the machine shown here. The machine was commissioned in 2021 and can be inspected at the customer's site.
Force tn 125 - 1000
Opening Force tn 100
Driven Speeds 1
Motor Power kW 75
Rapid Pre-fill Speed mm/s 100
Variable Working Speed mm/s 12-4
Return Speed mm/s 60
Guide Diameter mm 300
Maximum Pressure Bar 290
Usable Table Surface mm 4,750 x 2,200
Lower Table Travel mm 2,200
Vertical Movement of Upper Table mm 800
Between Columns mm 5,000 x 1,490
Total Width (Front) mm 6,000
Total Depth (Side) mm 4,750
Overall Height mm 7,000
Weight kg 150,000
Specially designed for the setup of progressive stamping tools.
STRUCTURE AND TABLES
• The frame is constructed from flame-cut steel and divided into three electro-welded monoblocks, made exclusively from S355JR steel.
• Stabilized and machined after welding to ensure perfect parallelism and precision.
• Calculated and designed with finite element software.
• Cylindrical columns with a diameter of 300 mm offering high mechanical strength, ground and chrome-plated for low friction and wear resistance.
• Upper table with T-slots and anti-fall protection system.
Lasdowpgwnspfx Ah Deh
• Usable table surface: 4,750 x 2,250 mm.
• A frame that can withstand 600 TN of concentrated force over 1/3 of its surface.
• The lower table is designed for a displacement of up to 50 TN and is supported by bronze guides with graphite loading and mechanical positioning centers for precise table placement.
CYLINDER AND HYDRAULIC UNIT
• 6 single-acting cylinders with honed sleeves, chrome-plated pistons, and wear-resistant guides.
• Four 50 TN hydraulic compensators mounted on the ends of the lower table.
• 800-liter hydraulic power unit with quiet Denison pump, automatic shutoff of rapid pre-fill speed, and working speed equipped with a decompression system.
• Proportional pressure system and optical measuring devices for upper table displacement control, with a synchronized electronic system to compensate for eccentric or unbalanced forces.
• Hydraulic unit cooling system with independent air-oil cooler.
• All M series hydraulic presses are fitted with a side pressure switch to set the optimal pressure for each application.
• Glycerin manometer with tonnage display.
ELECTRICAL INSTALLATION AND SAFETY
• Includes a SIEMENS safety PLC model SIMATIC S7 1200 and a 12" touchscreen. Permits programming of semi-automatic and automatic operation modes, power, stroke, and dwell time on the upper table. 300 recipes can be stored, each recipe programmable for all above parameters.
• Low voltage operation via two-hand control station.
• Anti-drop protection system with hydraulic safety jaws.
• Category IV light curtains on the front and rear.
• Side protection panels with opening and safety micro-switches.
mali oglas

694 km
Hidravlična stiskalnica za spuščanje
Sack & KiesselbachEP 500
Klic
Stanje: rabljeno, Leto izdelave: 1952, Machine type:
Deep Drawing Press
Manufacturer:
SACK & KIESSELBACH
Model:
EP500
Year of manufacture:
1952
Pressing force:
500 tons
Clear width:
450 mm
Ledpfx Aswxw H Eeh Deah
Location:
In Germany
mali oglas

226 km
Hidravlične stiskalnice
KK-IndustriesHydraulikpresse 4 Säulenpresse KKI 500 to 2000 x
Klic
Stanje: novo, Column spacing: 2000 x 1000
Return speed: 150 mm/s
Approximate weight: 35,000 kg
Stroke: 800 mm
Total power requirement: 30 kW
Installation height: 1000 mm
Rapid traverse: 120 mm/s
Pressure: 500 bar
Working table: 2500 x 1500 mm
Working speed: 12 mm/s
Dimensions (LxWxH): 2500 x 2700 x 5400 mm
We also build custom presses for your specific application.
DETAILS: 4-Column Press, 500 tons
Capacity: 500 tons (at 250 bar – 510 tons)
Control: Automatic via two-hand operation with key switch selection
1. Manual via operating panel for setup mode
2. Automatic with single cycle via two-hand operation, without drawing cushion
Lajdpfsd Aca Aox Ah Doh
Main cylinder: Ø500 mm
Auxiliary cylinders: 2 pcs, Ø120 x 80 mm (move alongside main cylinders)
Motor: 37 kW – 50 HP
Pump: 100 cc = 150 l/min REXROTH axial piston pump
Cylinder speed:
Advance 150 mm/s – Return 170 mm/s – Pressure phase 15-8 mm/s
Working area: 2500 x 1300 mm (Table & ram plate with T-slots)
(T-slot dimensions as per customer drawing)
Distance between columns: 2000 x 800 mm
Installation height: 1000 mm (max. distance between table & ram plate)
Stroke length: 800 mm (length adjustable via linear scale)
Columns: Ø180 mm
Hydraulic accessories:
Hydraulic tank with control block & valves (complete REXROTH)
Oil tank capacity: 1500 l; Oil volume: 1200 l
Advance valves: 2 pcs
Hydraulic & mechanical ram securing system
Pressure regulator via PLC (min. pressure 60 tons)
Air cooler
Hydraulic accessories mounted on top of the press
Auxiliary motors
Auxiliary pump
Filter: Rexroth
Additional valve for spring-loaded opening
Speed adjustment via display
Hydraulic accessories mounted on top of the press
Safety railing around hydraulic tank
Side access ladder
Control accessories:
Controller: SIEMENS S7 1214
Safety PLC: SICK
Swiveling control panel
Ethernet connection for remote maintenance
Two-hand operation (mobile, sufficient cable length for front & rear operation)
Main control cabinet
12" Beijer PLC display
Light sensors at front & rear – SICK 1000 + 150 mm
Linear scale for stroke length adjustment (Novatechnik)
Soft starter for main motor
8 free inputs & outputs
Working area lighting
On side of working area: windowed door secured with limit switch (400 x 600 mm)
Table height: 1000 mm (floor to top edge of table plate)
Total weight: approx. 35,000 kg
Overall dimensions (LxWxH): approx. 2500 (including hydraulics) x 2700 x 5400 mm (including railing)
Foundation: mandatory
The price is valid until 30.12.2022!
Training and commissioning are included in the price.
mali oglas

394 km
Hidravlična - dvokolonska stiskalnica
NEFFDP400
Klic
Stanje: rabljeno, Leto izdelave: 2018, Pressing force: 400 t
Stroke: 300 mm
Control system: SIEMENS S7
Table size: 3100 x 1400 mm
Ram dimensions: 3100 x 1400 mm
Table height above floor: 950 mm
Total power requirement: 225 kW
Laodsvxwh Repfx Ah Djh
Machine weight: approx. 65 t
Space requirement: approx. 4.60 x 2.10 x 4.70 m
mali oglas

835 km
Hidravlična stiskalnica
Hidrobrasil50 Tonnen Doppelständerpresse
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, skupna višina: 2.500 mm, višina mize: 900 mm, stiskalna sila: 50 t, širina mize: 522 mm, dolžina mize: 522 mm, obratovalna hitrost: 8 mm/s, skupna masa: 2.900 kg, širina plošče bata: 498 mm, tabela razdalj do bata: 600 mm, vrsta vhodnega toka: Klimatska naprava, obratovalni tlak: 250 letvica, kapaciteta rezervoarja za olje: 130 l, vhodna napetost: 400 V, hitrost stiskanja: 8 mm/s, moč: 10 kW (13,60 KM), Oprema: varnostna svetlobna zapora, If the press does not exactly meet your requirements, please request a customized quotation with just one click:
Contact us for a tailored offer.
Hidrobrasil manufactures presses precisely according to your specifications—at surprisingly competitive prices!
####
50 T Top Ram Heated Press, double-column design, suitable for continuous operation, with the following basic specifications:
- Single heating level
- Idle speed up to 10 mm/sec (adjustable via rotary control)
- Opening speed up to 40 mm/sec
- Pressing speed starting at 8 mm/sec
- Table/heating plate size: 522 mm deep x 522 mm wide
- Ram/heating plate size: 498 mm deep x 498 mm wide
- 2 electrically heated plates, up to 200°C
- Oil temperature monitoring
- Hydraulic system with recirculating oil cooling
- Pressure holding valve: 0 to 3600 sec
- Pressure adjustment from 8 T to 50 T (50 T = 300 bar)
- Stroke limitation selectable via pressure or position
- Two-hand control, adjustable or fixed mounted
- Machine body double-coated
- Signal light: Red = Alarm, Yellow = Heating phase, Green = Ready
- Heating plates with electric heating rods, up to max. 200°C
- Setup, commissioning, and operator training available at extra charge
### Technical Data
## Construction
- Press type: Double-column press
## Thermally Neutral
- Temperature range: 80–120°C
## Operating Side
- Number of operator sides: 1
## Forces
- Max. pressing force: 500 kN
- Max. free opening force: 20 kN
- Pressure build-up time: Max. 3 sec (closed tool steel on steel)
## Dimensions
- Max. opening width: 600 mm
- Stroke and min. opening: 300/300 mm
- Table height above floor with heating plate: 900 mm
- Overall height above floor: approx. 2,500 mm
- Minimum hall height: 3,500 mm
- Parallel deviation at 20°C: +/- 0.1 mm
- Deflection: < 0.2 mm/m (determined at max. closing force with 70% loading)
- Total weight (without operating fluids): approx. 2.9 t
- Accessories: 2 heating plates (522 × 522 mm and 498 × 498 mm, max. heating power)
- Heating plates equipped with temperature sensors: up to 200°C
## Speeds
- Rapid close: 10 mm/sec
- Max. pressing speed: 8 mm/sec
## Sound Pressure
- Sound pressure level measured at 1.5 m height at the control panel (DIN 45635 T16 KL3): max. 78 dB(A)
## Hydraulics
- Number of press cylinders: 1
- Max. operating pressure: 250 bar
- Pressure build-up time: Max. 3 sec
- Pressure accuracy during pressing stroke: +/- 5 bar
- Main pump: BOSCHREXROTH gear pump, approx. 26 L/min
- Oil volume: approx. 130 liters (HLP 46 MW)
- Ambient temperature: max. 40°C
- Oil temperature: max. 55°C
- Feed temperature: not specified
- Automatic pressure readjustment for 5% pressure loss
- Pressure holding for up to 3600 sec
## Electrical
- Main power supply: 400 V AC
- Control voltage: 24 V DC
- Frequency: 50 Hz
Lsdpfxetwv S No Ah Deah
- Hydraulic main motor connection: 7.5 kW
- Total connected load (excluding heating plates): approx. 10 kW
Description of the Heated Press:
The Hidrobrasil heated press with a pressing force of 50 tons and a table size of 600x600 mm is specifically designed for industrial applications. This is a double-column oil-hydraulic press, equipped with a sliding table mounted on spring-loaded rollers. The press is highly suitable for a variety of pressing processes, providing precise and reliable operation.
mali oglas

1.228 km
Hidravlična stiskalnica
Hidrogarne/GarnetMV-800/NC SINCRO
Klic
Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: nepreverjeno, skupna višina: 6.400 mm, skupna širina: 4.500 mm, skupna dolžina: 3.800 mm, obratovalna hitrost: 110 mm/s, hitrost vzvratne vožnje: 180 mm/s, tabela razdalj do bata: 1.500 mm, We are offering a newly-built version of the machine shown here. The machine was commissioned in 2020 and can be inspected at the customer's site.
Technical Data:
Pressing force (T): 800
Opening force (T): 80
Motor power (kW): 55/75 + 55/75
Ram stroke: 1000 mm
Rapid approach speed (mm/s): 110
Working speed (mm/s): 6
Return speed (mm/s): 180
Guide column diameter (mm): 250
Maximum pressure (bar): 250
Usable table area (mm): 3,500 x 2,000
Lower table displacement (mm): 2,000
Distance between columns (mm): 2,000
Open height (mm): 1,500
Total width (front) (mm): 3,800
Total width (side) (mm): 4,500
Overall height (mm): 6,400
Weight (kg): 134,600
The MV-800E/NC-SINCRO press is specially designed for the setup and testing of dies, molds, and punches.
The four columns with 250 mm diameter, made from C45E steel, are manufactured specifically to withstand high stress.
It features an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability.
The press complies with all essential safety and health requirements pursuant to CE standards.
STRUCTURE AND TABLE
• A frame capable of withstanding 600 T of concentrated force on 1/3 of its surface.
• Lower table with T-slots.
• Upper table with T-slots.
• Usable table area: 3,000 x 2,000 mm.
CYLINDER AND HYDRAULIC UNIT
Lodpfx Aowlrv Uoh Djah
• Two double-acting hydraulic cylinders, each with 400 T capacity.
• Single-stage hydraulic power unit with automatic shutoff of rapid approach speed and independent operation. Equipped with a decompression system and proportional pressure pre-fill valves. Digital potentiometers on the upper table control movement; an electronic synchro system compensates for off-center or unbalanced forces.
• The press features a lateral pressure switch for optimal job-specific pressure adjustment.
• Glycerine manometer with tonnage display.
ELECTRICAL INSTALLATION AND SAFETY
• Electrical installation for operation with 1 or 2 speeds for the main cylinder feed.
• The press features both manual and automatic cycles (selectable via test mode switch):
• The manual cycle allows all press movements to be performed step-by-step at low speed.
• The automatic cycle enables the press to execute a full production cycle.
• Electrical safety system for the fall protection of the upper table.
• Lower table with hydraulic withdrawal and physical stops.
• The machine is equipped with a control panel featuring a touchscreen display for entering operating and calibration parameters.
• Two 1,000 mm optical safety barriers (Class IV) are installed at the front and rear.
• All Siemens electrical components are IP55-rated and manufactured according to current CE directives and regulations.
• Electrical and hydraulic functions are redundant and self-monitored. Includes an additional safety block and self-checking devices for functionality and safety. Includes testing and certification of proper functionality and the safety distance of the light curtains.
• Safety is further ensured by a laser and Class IV light curtain area protection system.
mali oglas

694 km
Hidravlična stiskalnica za spuščanje
Sack & KiesselbachEP 630
Klic
Stanje: dober (rabljeno), Leto izdelave: 1971, stiskalna sila: 630 t, Manufacturer: Sack & Kiesselbach
Model: EP 630
Operating principle: oil-hydraulic
Table height: 1175 mm
Stroke: 305 mm
Ljdjwxw Amopfx Ah Dsah
Tool installation height: 317 mm
Rapid down speed: 6.9 mm/s
Pressing speed: 0.3 mm/s
Return speed: 6.3 mm/s
Drive power: 11 kW
Electrical connection: 550 V / 60 Hz
Specifications subject to verification.
mali oglas

835 km
Hidravlična stiskalnica
Hidrobrasil160 Tonnen Doppelständerpresse
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, Hydraulic 160 T double-cylinder insertion press
Double-column press – two-cylinder press with 160 T capacity at 250 bar.
a) Idle downstroke speed: 9.8 mm/sec
b) Upward stroke up to 15.0 mm/sec
c) Table size: 1500 x 600 x 100 mm, height-adjustable
d) Ram plate: 1500 x 600 x 100 mm
e) Year of manufacture: 12/2020
f) Motor power: 11 kW
g) Pump capacity: 22 L/min
h) Stroke limitation via cam switch
i) Open height: 700 mm
j) Ram stroke: 500 mm
k) Remote operation via two-hand control
l) Pressure adjustment via rotary knob from approx. 30 to 160 T
m) Approx. height: 2,800 mm
n) T-slots per customer specifications
Lajdpfx Ahjgz H Dho Dsh
o) Weight approx. 4,200 kg
p) Oil tank capacity: approx. 200 L
q) Painted in RAL 5005 (royal blue) or per customer request
r) For safety reasons, the ram plate is painted orange (RAL 2009) or signal yellow (RAL 1023)
s) Assembly, commissioning, and training available upon request for a separate charge.
The stroke travel can be adjusted via cam switch.
The ram/table size of the machine shown is 1600 x 600 x 100 mm.
mali oglas

1.228 km
Hidravlična stiskalnica
HidrogarneFDL-150-100E/NC
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FDL-150-100E/NC, skupna dolžina: 1.200 mm, stiskalna sila: 150 t, širina mize: 800 mm, delovna višina: 600 mm, razmak između stupova: 1.250 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, DOUBLE COLUMN HYDRAULIC PRESS WITH TWO LATERAL CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR THE EXTRACTION OF THE MANDREL AND THE ROTOR SHAFT, AS WELL AS FOR SHAFT EXTRACTION IN CASE OF REPAIR
Equipped with a retractable table for stacking and handling rotors and stators.
Complies with all essential CE safety and health requirements.
FRAME AND TABLES
Comprises a rigid, electrically welded frame with fixed bed, manufactured exclusively from S355JR steel.
Stabilized and machined at the end of the welding process to guarantee perfect parallelism and precision.
Calculated and designed using finite element analysis software.
Lasdjwpg Awjpfx Ah Doh
Mechanically movable T-slot table, 1200 x 800 mm, with 1,200 mm travel, fitted with a worm gear reducer and a 0.5 HP electric motor with brake.
Central hole in the table: 250 mm diameter, max depth 550 mm.
Useful lifting power of the table for movement: 4 tons.
Travel speed: 30 mm/sec.
Internal front width 1250 mm (distance between columns).
Working height: 600 mm.
2 hydraulic cylinders of 75 tons each (150 tons total), with 1,200 mm stroke, joined by a plate with 250 mm central hole.
Max. usable height (cylinder plate): 1,440 mm.
Min. usable height (cylinder plate): 200 mm.
EXTRACTION CYLINDER
1 central cylinder of 100 tons capacity, 1,200 mm stroke.
Prepared for mounting extraction clamp, rod end threaded M 35x1.5, thread length 40 mm.
Max. usable height (extraction cylinder): 1,600 mm (to root of rod thread).
Min. usable height (extraction cylinder): 400 mm (to root of rod thread).
HYDRAULIC UNIT
Two-speed hydraulic unit, 5.5 HP power “Siemens Motor”, with automatic disengagement of fast speed and independent speeds. Max. pressure 250 bar.
Pressure regulation system via proportional valves.
Air-oil cooler.
Temperature sensor.
Hydraulic unit installed on right side.
Includes a SIEMENS SIMATIC S7-1200 safety PLC and a 12” HMI touchscreen (MTP model) with 99 memory slots, allowing regulation of pre-pressing, pressing power, interference fit, and stroke of pressing and extraction cylinders, as well as dwell times during processes.
Redundant and self-monitored electrical and hydraulic controls. Additional safety block and self-monitoring devices for operation and safety are included. Verification and certification of correct operation and safety distance for photocells are included.
Operation by means of low-voltage two-hand electric pushbutton.
All installed electrical materials are Siemens: relays, contactors, main motor, etc.
Prepared for Industry 4.0 integration.
Safety features include Category IV photoelectric barriers on the front working area, two fixed side guards, and a rear hinged guard with magnetic disconnection sensor.
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

mali oglas

1.228 km
Hidravlična stiskalnica
HidrogarneRM-100/NC
Klic
Stanje: rabljeno, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.675 mm, višina mize: 900 mm, skupna širina: 1.075 mm, skupna dolžina: 1.525 mm, stiskalna sila: 100 t, širina mize: 700 mm, dolžina mize: 500 mm, skupna masa: 2.540 kg, hitrost vzvratne vožnje: 60 mm/s, razdalja med stranskimi nosilci: 800 mm, hod: 250 mm, Oprema: varnostna svetlobna zapora, RIGID FRAME HYDRAULIC PRESSES
We have designed the R/NC series of motorized rigid frame hydraulic presses with a range of six different capacities, from 80 to 500 tons. Specifically engineered for stamping, die-cutting, and deep drawing operations.
The latest generation R series hydraulic presses have evolved to offer great versatility, including the ability to integrate these machines into automated production lines. They operate at hydraulic pressures below 320 BAR to ensure greater durability of the entire hydraulic system.
The R/NC series drawing and stamping presses are built with an electro-welded frame made exclusively of S355JR steel. The structure is stabilized and machined after the welding process to guarantee perfect parallelism and accuracy. Design and stress calculations are carried out by finite element analysis software, thereby ensuring our high standards of precision and quality are consistently met.
Equipped with machined C45E steel upper and lower tables with DIN-650 T-slots. The upper table maintains perfect parallelism via four lateral cylindrical guides with self-lubricating, maintenance-free bimetallic bushes.
The press features a double-acting cylinder with a lapped sleeve, chrome-plated piston, and maintenance-free wear-resistant guides.
The hydraulic power unit has two speeds, with automatic disengagement of the rapid approach. Cylinder decompression valve included.
Standard equipment includes a SIEMENS SIMATIC S7 1200 safety PLC and a 4” touch screen, model MTP-400, mounted above the electric foot pedal. Allows programming of operating mode (semi-automatic and automatic), pressing force, stroke, and dwell time of the upper ram. Storage capacity of up to 99 recipes; all parameters above can be programmed in each recipe.
The electrical panel features a selector for choosing between manual and automatic operation, and a key-operated selector for maintenance work.
Electrical and hydraulic operations are redundant and self-monitored. An additional safety block and self-monitoring devices are included for operation and safety.
Includes inspection and certification of correct operation and safety distances for light curtains.
Ledpfxowlgkmo Ah Dsah
To ensure operator safety, type 4 PLe safety light curtains are installed at the front working area, accompanied by two fixed side guards and a rear opening guard with a magnetic interlock switch, polycarbonate windows, and LED interior lighting.
Hydraulic cushion or ejector installation is supported.
Complies with all essential health and safety requirements per CE directives.
Supplied with instruction manual.
Technical Data (100 T Model)
Force: 100 T
Motor power: 13 kW
Working speed: 3–9 mm/s
Approach speed: 40 mm/s
Return speed: 60 mm/s
Maximum pressure: 319 bar (up to 320 bar)
Piston stroke: 250 mm
Guide diameter: 50 mm
Lower table: 700×500 mm
Upper table: 600×450 mm
Maximum vertical clearance: 500 mm
Frontal opening: 800 mm
Working height: 900 mm
Total front width: 1,525 mm
Total depth: 1,075 mm
Total height: 2,675 mm
Weight: 2,540 kg
mali oglas

1.228 km
Hidravlična stiskalnica
HidrogarneMV-600E/NC
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MV-600E/NC, stiskalna sila: 600 t, širina mize: 990 mm, dolžina mize: 890 mm, obratovalna hitrost: 5 mm/s, skupna masa: 23.000 kg, hitrost vzvratne vožnje: 18 mm/s, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, HYDRAULIC FOUR-COLUMN PRESS FOR PUNCHING, DRAWING, PIERCING, AND DEBURRING OPERATIONS
Press Force: 600 tons
Motor Power: 40 HP at 440 Vac / 60Hz
Working Speed: 5 mm/s
Approach Speed: 15 mm/s
Return Speed: 18 mm/s
Ram Stroke: 1,015 mm (40")
Guide Rod Diameter: 200 mm
Usable Table Area: 990 x 890 x 130 mm (39" x 35" x 5")
Distance Between Columns: 990 x 370 mm
Vertical Clearance: 1,625 mm (64")
Working Height: 990 mm (39")
Lower Hydraulic Knockout Force: 80 tons
Lower Knockout Stroke: 406.4 mm (16")
Upper Hydraulic Knockout Force: 80 tons
Upper Knockout Stroke: 406.4 mm (16")
Overall Width (Front): 1,850 mm
Overall Depth (Lateral): 1,700 mm
Overall Height: 4,500 mm
Laedpfjwpggijx Ah Djh
Weight: approx. 23,000 kg
The MV-600E/NC Four-Column Hydraulic Press is part of the M/NC series, specially developed for higher precision and capacity and designed for punching, deep drawing, stamping, and deburring operations.
STRUCTURE AND TABLES
• Made of three electrically welded blocks manufactured exclusively from S355JR steel.
• Stabilized and machined after welding to ensure perfect parallelism and precision.
• Designed and calculated using finite element software.
• Equipped with a SIEMENS SIMATIC S7 1200 PLC and a 7” HMI KTP-700 touch panel, enabling programming of force, ram stroke, and speeds. It offers memory for up to 300 stored work cycles.
CYLINDER AND HYDRAULIC UNIT
• Double-acting cylinder with lapped sleeve, chromed piston, and maintenance-free wear guides.
• Motorized hydraulic unit with two speeds and automatic cut-off for rapid advance. Features a high-pressure pump and a 10-micron return filter. Includes cylinder decompression valve, directional valve, and safety valve. Side-mounted pressure switch allows adjustment of pressure to suit each specific operation.
• Glycerine pressure gauge with tonnage indication.
ELECTRICAL INSTALLATION AND SAFETY
• Electrical control cabinet with selector switches for manual, semi-automatic, or automatic operation, and for fast or slow speed selection.
• Equipped with PLC support for internal manoeuvres and decompression times.
• Operation via low-voltage dual hand control panel.
• Electrical and hydraulic operations are redundant and self-monitored, featuring an additional safety block and self-checking safety devices for both controls and operations. Systems include testing and certification of proper function and safety distance for light barriers.
• Safety is ensured by Category IV safety light curtains in the front work area, two fixed side guards, and a rear movable guard with magnetic shut-off detection.
• Machine is equipped with IXON system for online connectivity in case of malfunctions or for reprogramming.
• Maintenance ladder with upper platform (scaffold) for repair access.
mali oglas

1.228 km
Hidravlična stiskalnica
HidrogarneMV-300E/NC
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MV-300E/NC, skupna višina: 3.500 mm, skupna širina: 1.800 mm, skupna dolžina: 2.300 mm, stiskalna sila: 300 t, širina mize: 1.250 mm, dolžina mize: 1.250 mm, skupna masa: 18.000 kg, pritisk: 320 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, FOUR-COLUMN HYDRAULIC PRESS FOR STAMPING, DEEP DRAWING, DIE CUTTING, AND DEBURRING JOBS
Laodpfxswphhne Ah Dsh
Custom designed for greater precision and capacity, and especially manufactured for deep drawing, die cutting, and deburring operations.
Equipped with an upper and lower table made of machined C45E steel with DIN-650 T-slots to ensure minimum friction during the vertical movement of the upper table, thanks to maintenance-free bimetallic bushings and perfect parallelism ensured by four cylindrical, chromed, and ground columns.
Uses an optimized hydraulic system with a pressure of 290 Bar, guaranteeing long service life and reliable operation. Fully complies with all essential safety and health requirements according to CE regulations.
mali oglas

1.227 km
Hidravlična stiskalnica
TJF-GARNETFDM-150
Klic
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 150 t, pritisk: 250 letvica, Double-column hydraulic press equipped with two lateral cylinders connected by a platen for pre-pressing and pressing rotors and stators, as well as a central cylinder for mandrel extraction and rotor shaft fitting, including shaft extraction for maintenance purposes. Features a retractable table for stacking and handling rotors and stators.
MAIN CYLINDERS 150 T
2 hydraulic cylinders, each rated at 75 T with a 750 mm stroke length, joined by a slotted platen, with a central bore of 250 mm diameter.
Maximum usable height between cylinder platens: 1,300 mm.
Minimum usable height between cylinder platens: 550 mm.
EXTRACTION CYLINDER
1 central cylinder rated at 80 T with a 1,200 mm stroke.
Prepared to fit an extraction clamp, rod end threaded M 35.150 x 40 mm length.
Maximum usable height for extraction cylinder: 1,300 mm to the base of the rod thread.
Minimum usable height for extraction cylinder: 100 mm to the base of the rod thread.
TABLE AND STRUCTURE
Mechanically movable slotted table, 1,200 x 800 mm, with 600 mm stroke, equipped with worm gear reducer and 0.5 HP electric motor with brake.
Central bore in the table: 250 mm diameter, with a maximum depth of 550 mm.
Effective lifting capacity of the table for 4 T displacement.
Table movement speed: 2,600 mm/min.
Front internal width: 1,250 mm.
Working height: 600 mm.
Lasdpfxsxc Ekdo Ah Deh
HYDRAULIC UNIT
Dual-speed hydraulic power unit, 5.5 HP, with automatic disconnection of rapid speed and independent speeds. Maximum pressure: 250 bar.
Digital adjustment of maximum force for pre-pressing, pressing and fitting; digital force display in T. Pressure regulation via proportional valves.
Selector for approach and measurement speeds.
Olajšamo vam iskanje
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Hidravlične dvostebrične preše in štiristebrične preše (311)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:
- 2 Prevoznik Žerjava 20 5
- German
- Hidravlična Črpalka Za Priključne Gredi
- Hidravlične Cevi Press
- Hidravlični Agregati 200 Bar
- Hidravlični Tovornjak Lopato
- Hsc 20 Linear
- Id 5005
- Idx 23

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec