Hidravlične dvostebrične preše in štiristebrične preše nakup rabljenega (321)

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0362, Pressure: 250 t Passage width: 1800 mm Stroke: 600 mm Total power requirement: 22 kW Approx. machine weight: 24 t Dimensions (L x W x H): approx. 3390 x 3400 x 3800 mm Column diameter: 160 mm Retraction force: 25 t Max. working height: 800 mm Table size: 1800 x 1600 mm Ram size: 2350 x 1600 mm Table height above floor: approx. 900 mm Hydraulic table movement: 25 mm/sec Max. table load: 5 t Advance speed: 10 mm/sec Pressing speed: 10 mm/sec Return speed: 25 mm/sec Rapid traverse speed: 10 mm/sec Oil tank: 600 l Oil cooling (electrical): 1.5 kW (max) Recommended oil: 46 grade / 10 μm Nkedjfxyinjpfx Abbot SIEMENS monitor: 10 inch Vibration dampening plates: The machine is mounted on four specially manufactured damper plates, each 450x450x85 mm. Oil tank with oil cooling: The tank holds 1,500 l. The oil is cooled by a dedicated pump, which activates at 30°C. Oil filtration system: Independent of the main and cooling pumps, the press features a filtration circuit. The pump runs continuously but only requires 1.5 kW. Energy-saving function: If the main pump is not required for a preset period, it switches to energy-saving mode and then consumes only about 2 kW/h. The pump is immediately at full capacity again when pressure is required. Safety technology: Optionally, safety PLCs from SICK or Pilz can be selected. The light curtains are from the same manufacturer or from German manufacturer SCHMERSAL. Control cabinet: 40% of the control cabinet space remains available for future installations. All components inside the cabinet are from SIEMENS. Screws: All screws used in the machine are zinc-plated or yellow passivated. Oil drip tray: The hydraulic block and pump are placed in a small oil drip tray to collect any oil during repair or hose change. Noise emissions: According to standards, the press produces a maximum of 67 decibels. Accessories: Roller loading bridges: Two removable loading bridges with rollers, each 1500 mm long, supports equipped with large heavy-duty castors. Parallelism monitoring: Both cylinders are monitored by Balluff position measuring systems and Sick wire-draw encoders. Parallelism monitoring activates at the start of the pressing operation. Monitoring accuracy can be set via the controller. The function is deactivated during idle travel. On each outer side of the ram, a SICK cable-pull encoder measures position. The controller opens or closes the oil flow to the cylinders using specially designed fast valves. Achievable parallelism accuracy across the entire width is better than 1 mm.

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: HB 2022-A-073, Portal frame press with 300 T capacity a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500 x 1600 mm d) Clear opening height 700 mm e) Overall dimensions (LxWxH) approx. 4500 x 2300 x 3700 mm f) Oil temperature display on tank g) Lubrication via grease nipples h) Table in grid construction, with T-slots according to customer specification, otherwise 22 mm i) Controls mounted on a pivoting arm attached to the bridge j) Pressure adjustable from 50 T up to 300 T via MONITOR k) Bridge travel driven by two geared motors, rack and pinion drive l) Cylinder moves left and right via rack and pinion drive m) Machine body double-coated n) Cylinder induction-hardened Design Type: Gantry Press Thermally neutral 80–120 °C Number of operator sides: 3 Forces Nkjdpfxoh Agnuo Abbst Maximum pressing force: 3,000 kN Maximum free tear-off force: 500 kN Pressure build-up time (closed die, steel on steel): Max. 3 sec Dimensions Maximum opening width: 700 mm Stroke and min. opening: 700 mm / 0 mm Table height above floor: approx. 980 mm Height above floor (overall height): approx. 3700 mm Minimum hall height: 5,000 mm Deflection Measured at maximum closing force with 70% occupancy: ≤ 0.8 mm/m Weight Total weight of press (without operating fluids and table plate): approx. 22 T Speeds Rapid closing: 17 mm/sec Pressing speed: 8 mm/sec Opening: 55 mm/sec Sound Pressure Sound level measured at 1.5 m height at control panel: max. 78 dB(A) DIN 45635-T16-KL3 Hydraulics Number of press cylinders: 1 Operating pressure: max. 350 bar Pressing pressure build-up time: 2-3 sec Pressure accuracy during pressing stroke: +/- 5 bar Main Pump BOSCH REXROTH, approx. 93 L/min Oil volume: HLPD 46 MW, 900 liters Ambient temperature: max. 45 °C Oil temperature: max. 55 °C Electrics Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Connection for hydraulic main motor: IE3, 22 kW Total connected load: approx. 30 kW

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Nedjph Uk Njpfx Abbekt Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Portal frame press with 400 T capacity Oil-hydraulic double-column press a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000 x 3000 mm d) Clear opening height 1500 mm e) Overall dimensions approx. LxWxH 6000 x 5000 x 4500 mm f) Oil temperature indicator on tank g) Lubrication via grease nipples h) Table with grid design i) Operation via a control panel mounted on a pivot arm, attached to the bridge j) Pressure adjustment from 60 T to 400 T via monitor k) Bridge movement by two geared motors via rack and pinion l) Cylinder traverses left and right via rack and pinion m) Machine body powder-coated or double painted n) T-slots as per customer specifications o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operator sides: 3 sides Forces Maximum pressing force: 4000 kN Maximum free pulling force: 600 kN Pressurization time (clamped tool, steel on steel): max. 3 sec Dimensions Maximum opening: 1500 mm Stroke and min. opening: 1500 mm / 0 mm Table height above floor: approx. 900 mm Overall height above floor: approx. 4500 mm Minimum hall height: 5500 mm Deflection Measured at max. closing force with 70% load ≤ 0.8 mm/m Weight Total press weight without operating fluids and table plate: approx. 52 T Speeds Fast closing: 17 mm/sec Sound pressure Sound pressure level measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics Number of press cylinders: 1 pc. Operating pressure: max. 280 bar Pressurization time: 2–3 sec Pressure accuracy during pressing stroke: ±5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrics Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic main motor connection (IE3): 30 kW Nkjdpfxohyc Nws Abbot Total connected load: approx. 35 kW

Stanje: novo, Pressure: 100 t Clear passage width: 700 mm Stroke: 450 mm Machine weight approx.: 6 t Dimensions (L x W x H): approx. 3000 x 1210 x 3100 mm Retraction force: 10 t Motor power: 22 kW Max. working height: 850 mm Advance speed max.: 1 - 100 mm/sec Return speed: 1 - 100 mm/sec Nsdpfx Abefxyhqsbskt Pressing speed: 1 - 10 mm/sec Ram plate: 1090 x 600 mm Table plate: 1090 x 600 mm Positioning accuracy: 0.1 mm Table height above floor approx.: 800 mm Oil tank: 300 l Oil cooling (electric): 1.5 kW (max) Ejector: d=100 mm Ejector stroke: 210 mm Ejector force: 100 t Number of ejector pins: 1 pc Monitor WEG: 15 inch Hydraulics and tank on top of press: 2,000,-- ? Peripheral maintenance platform: 2,400,-- ? Siemens S7 1500: 3,000,-- ? Oil drip tray: 2,400,-- ? Heating circuit connections (3 pcs), monitored w. time control function: 5,800,-- ?

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 4303, Pressure: 500 t Passage width: 2100 x 1500 mm Stroke: 1000 mm Total power requirement: 62 kW Approx. machine weight: 39 t Dimensions L x W x H: 5100 x 2800 x 4040 mm Retraction force: 40 t Main cylinders: 2 units Column diameter, main cylinders: 360 mm Table size: 2100 x 1500 mm with T-slot Ram size: 2100 x 1500 mm Table height above floor: approx. 850 mm Advance speed: 300 mm/sec Return speed: 300 mm/sec (at 20 t ram weight) Pressing speed, pressure phase: 200 t = 28 mm/sec Oil tank: approx. 1000 l Auxiliary cylinders: 2 units Column diameter, auxiliary cylinders: 120 mm Overall table plate size: approx. 2750 x 1600 mm Overall ram plate size: approx. 2750 x 1600 mm Pressing speed, pressure phase: 300 t = 20 mm/sec Pressing speed, pressure phase: 500 t = 6 mm/sec Ram retraction force: 40 t Control circuit voltage: 24 V Voltage: 400 V Frequency: 50 Hz Axial piston pump (REXROTH/Bosch A4VSO125): 290 l/min Installation height (distance working table – ram plate): 1500 mm Hydraulic manifold: REXROTH Pressure control: via PLC (min. pressure 50 t) Cylinders: 4 x Ø90 x 70 mm Stroke length: 300 mm, adjustable via PLC Ejector forward speed: 95 mm/sec Ejector return speed: 240 mm/sec Capacity: 4 x 15 t at 250 bar Pressure adjustment: via monitor from 50-500 t Pressure holding time: 0–900 sec Hydraulic tank: 2000 l Control system Siemens: S7 300 Program memory: 200 programs Electronics by German manufacturers: SIEMENS/MÖLLER Control panel: on swivel arm Photoelectric sensors Sick: 1500 mm on the front side Control System Functionality: The linear encoder continuously transmits the ram and ejector positions to the controller. Travel distance, upper stop position, and switching point (where the press changes from rapid approach to working speed), as well as the target end position, can be easily and quickly entered via the monitor control. Working speed can be adjusted in 1 mm/sec increments from 0 to 10 and in 10 mm increments from 10 to 300 mm. Additionally, the machine features pressure monitoring which, upon reaching the desired pressure, either returns the ram to the top position or holds the pressure at the set level (within 5% tolerance) for the preset time, then opens. The control system monitors secured areas, the entire hydraulic system, pumps, and temperature. It also synchronizes the main cylinders and compensates for unilateral overloads. The control system is housed in a separate control cabinet. The actual press operation is performed via a control panel mounted on a swivel arm, thus reducing movement distances for the operator. Additional Equipment: • Polycarbonate glass 8 mm in the rear door interior • Polycarbonate glass 8 mm in the side doors of the work area and within the work area Nkjdsdyynvopfx Abbjt • Liquid channel with 25 mm radius on the front, rear, and sides of the table Special Features of the Press: • Incl. 10% reserve (max. capacity 550 t) • Steel grade: Stainless steel LCG ASTM A36, manufactured according to DIN 8651 • Motor and pump automatically stop once the tool is closed and compensate for 5% pressure loss, providing significant cost savings Nitrogen Compression Unit: The scope of delivery includes a nitrogen compression unit capable of generating an instantaneous pressure of 280 bar, which can be switched on and off as needed.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, širina mize: 1.000 mm, dolžina mize: 600 mm, 40T H-frame press with sliding table Press Specifications • Pressing force: 6–40 t (adjustable) • Max. installation height: 700 mm • Usable area lower table: 1000 x 600 mm • Usable area slide: 1000 x 600 mm • Frame type: H-frame • Guide column diameter: Ø 100 mm (4 pcs., corners) • Table height from floor: 800 mm Njdpfsxrby Hjx Abbekt • Overall dimensions approx. (W x D x H): 2,100 x 1,600 x 3,500 mm • Total weight approx.: 3,500 kg • T-slots and holes are manufactured according to customer specifications. HYDRAULIC CYLINDER: • Piston stroke: 0–500 mm (adjustable) • Cylinder diameter: Ø 140 mm (1 pc.) • Piston rod diameter: Ø 80 mm (1 pc.) • Max. working pressure: 260 bar • Return speed: 90 mm/s • Slide speed: 9 mm/s • Idling speed: 80 mm/s HYDRAULIC UNIT: • Hydraulic pump (Brand: ASC): 67 + 8 L/min (1 pc.) • Motor rating: 4 kW (1 pc.) • Pressure accuracy during pressing stroke: +/- 5 bar • The hydraulic power unit is mounted at the top rear of the press. • Hydraulic manifold and valves are by DUPLOMATIC. • Pressure displayed via manometer. • Air and oil filters by FILTREC. • Electronic oil level switch is installed. • Air cooler is used for hydraulic cooling. • System pressure adjustable via pressure switch. • Control via sensor. • Rear safety cover (door) on the press. • Safety light sensors and internal lighting included. ELECTRICAL CONNECTION: • Main supply: 400V AC • Control voltage: 24V DC • Frequency: 50 Hz • Hydraulic main motor connection: 4 kW • Total connected load approx.: 6 kW CONTROL CABINET EQUIPMENT: • Protection class: IP 54 • Reserve space: 30% • Cooling: Yes (air cooling) • Internal lighting: Yes • Mode selector switch: Yes (lockable) • Electrical equipment from Siemens, Allen Bradley, and SICK brands.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Clear passage width: 2,500 mm Stroke: 900 mm Total power requirement: 62 kW Machine weight: approx. 27.5 t Dimensions (L x W x H): approx. 3,950 x 2,200 x 4,850 mm Retraction force: 40 t Main cylinders: 2 units Column diameter: 220 mm Installation height: 1,300 mm Table size: 2,500 x 1,600 mm Ram size: 3,100 x 1,600 mm Table height above floor: approx. 900 mm Forward speed: 200 mm/sec Return speed: 200 mm/sec Working speed: 5 - 15 mm/sec Oil tank: 1,500 l Oil quantity: 1,200 l Adjustable pressure control: 50 - 400 t Drawing cushion: 1,400 x 800 mm Drawing unit capacity: 30 - 60 t Drawing cushion stroke: 250 mm Drawing cushion speed: 5 - 80 mm/sec Nkedpoin Et Nofx Abbot Robust machine frame with solid welded construction Low maintenance and reliable Piston rod with induction hardening and chrome coating T-slots as per customer specifications, if not specified: 22 mm according to DIN CE certificate Manufactured according to EU standards Operating manual, technical documentation, and papers in German Machine steel: LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front and rear: Sick 1,300 mm Hydraulic components: Bosch Rexroth Monitor: Siemens 12-inch Electrical control cabinet for wall mounting Press interior illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: pump idle power consumption reduced to approx. 2 kW Remote monitoring for remote maintenance Two-hand operation on movable stand Additional Information: Pressure build-up up to 400 t within max. 4 seconds after tool closure Left side of the press closed by door (1,000 x 800 mm) with crossbars Ø 20 mm Right side of the press closed by door (1,000 x 800 mm) with crossbars Ø 20 mm The press can be operated manually, semi-automatically, or fully automatically.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, The P50MR motorized hydraulic press ensures high performance and maximum operational precision thanks to its robust, fully laser-cut frame, with no welds at the points of greatest stress. It is equipped with an immersed 400 V 50-60 Hz motor unit, a rapid approach and return pump factory set to 20 bar, and a pressure pump with an adjustable handwheel for delivering the required power. It also features a maximum pressure valve with mechanical lock to prevent overpressure, and the standard pressure gauge allows extremely precise calibration of the delivered force. Specifications: - Force: 50 Ton - Internal frame width: 800 mm - Approach speed: 1800 mm/min - Working speed: 350 mm/min - Rapid flow rate: 26 l/min - Slow flow rate: 5 l/min - Cylinder stroke: 300 mm - Cylinder bore: 135 mm Nkodpofvhqgjfx Abbjt - Rod diameter: 70 mm - Ram end diameter: M30 - Tank capacity: 50 liters - Max. pressure: 350 bar - Voltage: 400 V - Frequency: 50-60 Hz - Motor power: 3 kW - Max. absorbed current: 5.5 A - Weight: 500 kg - Dimensions: 1550 x 800 x 1965 (h) mm

Stanje: novo, Condition: New Delivery time: Approx. 4 months from order placement Country of origin: Italy Price: €172,500 Lease rate: €3,260.25 Pressing force: 300 t Stroke: 500 mm Clearance between columns: 1250 x 1000 mm Daylight opening: 600 mm Rapid traverse: 22 mm/s Working speed: 2 mm/s Motor: 7.5 kW Length: 1750 mm Width: 1500 mm Height: 2800 mm 4-column design Round ram guide Table and ram with T-slots Two-hand operation Siemens PLC Pressure gauge Operating manual OPTIONS: Light curtain € on request Siemens touchscreen control, up to 50 programmable programs, for configuring: - Upstroke and downstroke quotas - Bottom pause time - Decompression time - Working pressure setting - Piece counter - Pre-stop for upstroke and downstroke - Setting for manual and automatic operation - Alarm and fault management Nodpfswir Acjx Abbskt € on request Hour counter € on request Piece counter € on request Decompression valve € on request Oil cooler with decompression valve € on request Pressure switch € on request

Stanje: novo, Condition: New Estimated delivery time: approx. 4 months from order Country of origin: Italy Price: €132,500 Leasing rate: €2,504.25 Pressing force: 200 t Stroke: 500 mm Distance between columns: 1250 x 1000 mm Installation height: 600 mm Rapid traverse speed: 25 mm/s Working speed: 3.5 mm/s Motor: 7.5 kW Length: 1550 mm Width: 1300 mm Height: 2700 mm 4-column guide Round ram guide Table and ram with T-slots Two-hand operation Siemens PLC Manometer Operating manual OPTIONS: - Light barrier Price on request - Siemens touchscreen control, 50 programmable programs, for programming: - Upstroke and downstroke ratio - Dwell time at bottom - Decompression time - Working pressure setting - Piece counter - Prestop in upward and downward movement - Settings for manual and automatic operation Nkjdpowiq Abefx Abbet - Alarm and fault management Price on request - Hour counter Price on request - Piece counter Price on request - Decompression valve Price on request - Oil cooler with decompression valve Price on request - Pressure switch Price on request

Stanje: novo, Stanje: novo Dobavni rok: cca 4 mesece po naročilu Država izvora: Italija Cena: 104.000 € Leasing obrok: 1.965,6 € Tlačna sila: 125 t Hod: 500 mm Miza: 1200x700 mm Vgradna višina: 600 mm Hitri pomik: 115 mm/s Delovna hitrost: 7 mm/s Povratna hitrost: 70 mm/s Motor: 15 kW Dolžina: 2550 mm Širina: 1500 mm Nkedpjwiqxpjfx Abbst Višina: 2600 mm 4-smerno vodilo bata Miza in bat z utori v obliki črke T Dvoročno upravljanje Nastavitev hoda Nastavitev tlaka

Stanje: dober (rabljeno), Leto izdelave: 1982, Pressing force: max. 200 kN Safety distance: 100 mm Secondary stroke: max. 10 mm Motor power: 3 kW Nkjdpfsxr Ay Uox Abbet incl. accessories

Stanje: rabljeno, HYDRAULIC PRESS CAMP 250t Double-column press Piston stroke: 500 mm Table size: 570 x 570 mm Distance from table to piston: 600 mm Distance between columns: 570 mm Approach speed: 95 mm/sec Nodpfx Aogr Ur Rjbbskt Working speed: 7.5 mm/sec Return speed: 135 mm/sec Motor power: 30 HP

Stanje: potreben popravila (rabljeno), Leto izdelave: 1980, Funkcionalnost: omejena funkcionalnost, Prodaja se hidravlična stiskalnica Hans Schön z močjo 650 kN. Nazadnje je bila v uporabi pred približno 8 leti. Takrat je imela naprava težave s hidravlično cevjo (morda iztekanje hidravličnega olja ali netesno spojko). Težava ni bila odpravljena, saj stiskalnice niso več potrebovali. Sicer je stroj do takrat deloval brezhibno. Stiskalnica nima UVV pregleda! Nkodpfx Asx Ehmyebbjt

Stanje: potreben popravila (rabljeno), Leto izdelave: 1972, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 611, stiskalna sila: 100 t, Prodaja se hidravlična stiskalnica Hans Schön s kapaciteto 100 ton. Zadnjič je bila v uporabi pred približno 7 leti. Takrat je imel stroj težave s hidravličnim ventilom. To ni bilo popravljeno, ker stiskalnice niso več potrebovali. Sicer je stroj do zadnje uporabe deloval brezhibno. Stiskalnica nima UVV certifikata! Nedpfsx Ehlcox Abbjkt

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2269, skupna višina: 2.700 mm, višina mize: 900 mm, vgradna višina: 300 mm, skupna širina: 1.500 mm, skupna dolžina: 1.700 mm, stiskalna sila: 80 t, širina mize: 400 mm, dolžina mize: 400 mm, obratovalna hitrost: 300 mm/s, skupna masa: 2.600 kg, hitrost vzvratne vožnje: 180 mm/s, tabela razdalj do bata: 300 mm, vrsta vhodnega toka: trifazni, hod: 180 mm, kapaciteta rezervoarja za olje: 200 l, vhodna napetost: 400 V, hitrost stiskanja: 15 mm/s, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Stiskalnica je bila leta 2010 predelana v skladu z najnovejšimi varnostnimi smernicami. Njdpfx Asxyx Abobbjkt

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1979, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 2374, skupna višina: 2.800 mm, višina mize: 900 mm, vgradna višina: 430 mm, skupna širina: 1.600 mm, skupna dolžina: 1.200 mm, stiskalna sila: 100 t, širina mize: 580 mm, dolžina mize: 450 mm, obratovalna hitrost: 180 mm/s, skupna masa: 4.200 kg, hitrost vzvratne vožnje: 180 mm/s, širina plošče bata: 580 mm, dolžina plošče bata: 450 mm, tabela razdalj do bata: 430 mm, vrsta vhodnega toka: trifazni, hod: 150 mm, kapaciteta rezervoarja za olje: 380 l, vhodna napetost: 400 V, hitrost stiskanja: 25 mm/s, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Stiskalnica je trenutno v postopku generalne obnove. Tesnila cilindrov so bila zamenjana, hidravlična črpalka pa je bila preverjena za delovanje. Opremljena je s hidravličnim varnostnim blokom, ki ustreza najnovejšim varnostnim smernicam. Popolnoma nova električna in PLC-krmilna oprema ter sprednja varnostna svetlobna zavesa poskrbijo, da je stiskalnica skoraj kot nova. Njdpfx Ajxyxx Aebbskt

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1971, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 7/2118, skupna višina: 4.800 mm, višina mize: 950 mm, vgradna višina: 800 mm, skupna širina: 2.500 mm, skupna dolžina: 1.800 mm, stiskalna sila: 100 t, širina mize: 1.000 mm, dolžina mize: 870 mm, obratovalna hitrost: 400 mm/s, skupna masa: 10.800 kg, hitrost vzvratne vožnje: 300 mm/s, širina plošče bata: 1.000 mm, dolžina plošče bata: 870 mm, tabela razdalj do bata: 800 mm, vrsta vhodnega toka: trifazni, hod: 500 mm, kapaciteta rezervoarja za olje: 800 l, vhodna napetost: 400 V, hitrost stiskanja: 50 mm/s, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Stiskalnica je trenutno v postopku generalne obnove. Tesnila cilindrov so bila zamenjana, hidravlična črpalka pa je bila preverjena za delovanje. Opremljena je s hidravličnim varnostnim blokom, ki ustreza najnovejšim varnostnim smernicam. Popolnoma nova električna in PLC-krmilna oprema ter sprednja varnostna svetlobna zavesa poskrbijo, da je stiskalnica skoraj kot nova. Nksdsxyxriopfx Abbjt

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1984, Funkcionalnost: nefunkcionalno, skupna višina: 6.100 mm, višina mize: 1.100 mm, vgradna višina: 1.400 mm, skupna širina: 4.800 mm, skupna dolžina: 2.700 mm, stiskalna sila: 250 t, širina mize: 1.400 mm, dolžina mize: 1.000 mm, obratovalna hitrost: 300 mm/s, skupna masa: 21.500 kg, hitrost vzvratne vožnje: 150 mm/s, širina plošče bata: 1.400 mm, dolžina plošče bata: 1.000 mm, tabela razdalj do bata: 1.400 mm, vrsta vhodnega toka: trifazni, hod: 1.000 mm, kapaciteta rezervoarja za olje: 1.500 l, vhodna napetost: 400 V, hitrost stiskanja: 18 mm/s, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Stiskalnica je trenutno v generalni obnovi. Tesnila na cilindrih so bila zamenjana, hidravlična črpalka pa je bila preizkušena za delovanje. Opremljena bo z novim varnostnim hidravličnim blokom, ki ustreza najnovejšim varnostnim smernicam. Popolnoma nova električna napeljava in PLC-krmiljenje, vključno z varnostno svetlobno zaveso spredaj, bodo zagotovili, da bo stiskalnica skoraj kot nova. Nodpfx Aoxywigebbekt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, širina mize: 1.500 mm, dolžina mize: 1.000 mm, hitrost vzvratne vožnje: 10 mm/s, širina plošče bata: 1.500 mm, dolžina plošče bata: 1.000 mm, vrsta vhodnega toka: Klimatska naprava, potovalna razdalja osi X: 1.200 mm, moč: 9 kW (12,24 KM), Oprema: varnostna svetlobna zapora, If the press does not exactly match your requirements, simply request a customized quote tailored to your specifications with one click: HIDROBRASIL manufactures presses precisely according to your wishes — at surprisingly attractive prices! Nsdpfjtwmp Ssx Abbskt ##### Mold opener/closer with 40 tons pressing force Table and ram size: 1500 x 1000 mm for heated tools Technical Data: Pressing force: 40 tons Maximum open height: 1800 mm Ram stroke: 1500 mm Oil temperature monitoring: Electric air cooling Lubrication: Manual via grease nipples Travel of extendable table: 1200 mm Speed of extendable table: 30 mm/sec Electrically steplessly rotating ram: Up to 180 degrees T-slots: To customer's specification Pressure adjustment: From 10 tons to 40 tons Monitor: 10" on control cabinet for pressure adjustment and warning alerts Two-hand operation Special Features: Insulation of clamping plates towards the ram: Via resin insulation plate and special ventilation plate Hydraulic system: Components from BOSCH, REXROTH, PARKER, ATOS Safety components: By SICK Control: SIEMENS Remote maintenance unit: SECOMEA - Ethernet Installation and Operating Conditions: Maximum ambient temperature: 40 °C Height above ground (installation height): Approx. 3800 mm Total weight of the press without operating fluids: Approx. 13 tons This machine is delivered in the colors specified by the customer and complies with all statutory requirements and EU standards. ##### Are you looking for a precisely tailored machine? Contact us for a personalized offer.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, Hydraulic 400-ton column press suitable for continuous shift operation, with the following basic specifications: a) Closing speed: 100 - 450 mm/sec b) Opening speed: 50 - 250 mm/sec (adjustable via touchscreen) c) Pressing speed: 5 - 60 mm/sec (adjustable via touchscreen) d) Accumulator with approx. 4 nitrogen bottles e) Table size (clamping area): 2700 x 1700 mm (front view, between the columns) f) Total table size: 3400 x 1700 mm g) 28 mm T-slots as per customer specification h) Table, ram, and press head are stress-relieved annealed i) Column diameter: 250 mm j) Ram size: 3400 x 1700 mm (clamping area 2700 x 1700 mm) k) Overall machine dimensions approx. 3900 x 2200 mm (floor area) x 5700 mm height l) Oil temperature monitoring (adjustable via touchscreen) m) Automatic lubrication (adjustable via touchscreen) n) Free positioning of the ram (adjustable via touchscreen) o) KEYENCE light curtains 14 mm on front and rear sides p) Recirculating oil cooling (adjustable via touchscreen) q) Pressure holding valve 0 to 600 sec. (adjustable via touchscreen) r) Table plate size 3400 x 1700 mm, precision-milled s) Side-monitored doors, 1200 mm high, 1000 mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m away from the press u) Pressure adjustment from 50 to to 400 to (adjustable via touchscreen) v) Stroke limitation selectable by pressure or position w) Programming mode, setup mode, single stroke + continuous stroke (selectable via rotary switch) x) Swiveling operator panel with 15-inch touchscreen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed (SIEMENS S7 1500) aa) Machine body primed and painted bb) Installation, commissioning, and training available at extra cost The hydraulics of the presses we offer are completely assembled using components from BOSCH-REXROTH/Parker/HAWE. Only components (SIEMENS) that are readily available in Germany are used in the control cabinet. All safety equipment, except the light curtains, is supplied by SICK. The control system is supplied by SIEMENS (S7 1500) including the 15-inch touchscreen monitor. The SIEMENS remote maintenance unit SECOME-Ethernet is included in the scope of delivery. Nodpfx Abjg Iihwobekt SPECIAL FEATURE: Our design, featuring two press cylinders and the accumulator, allows full performance with a main motor of just 90 kW. Please refer to section 1.3 for technical details. Technical Data Design Type of press: Column press Thermally neutral: 80 – 120°C Number of operator sides: 2 Forces Press force max.: 4,000 kN Free opening force max.: 600 kN Pressure build-up time (closed tool, steel on steel): max. 2 sec. Dimensions – intended minimum tool height: 600 mm Max. opening width: 1600 mm Stroke and min. opening: 1000/600 mm Table height above floor: 820 mm Height above floor (overall height): approx. 5700 mm Hall height min.: 7000 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection (at max. closing force with 70% occupancy): ≤ 0.17 mm/m Weight Total weight of the press without operating materials: approx. 52 tons Speeds (see attached cycle diagram) Rapid closing: 100 - 450 mm/s Pressing speed at F max.:

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, Double-column press, 20-ton capacity a) Closing speed up to 10 mm/sec b) Opening speed up to 30 mm/sec c) Table size between columns: 1400x1100 mm d) Ram size between columns: 1400x1100 mm e) Manual lubrication (via grease nipples) f) UKF recirculating-cooling-filtration system (electric cooling) g) Pressure setting from 4 T to 20 T (adjustable via rotary knob) h) Stroke adjustment via sliding control Design Press type: Double-column press, hydraulic Thermally neutral: 80–120°C Number of operator sides: 1 side Forces Pressing force max.: 200 kN Free return force max.: 20 kN Pressure build-up time (closed tool, steel-on-steel): max. 4 sec. Dimensions Max. opening width: 500 mm Stroke: 300 mm Table height above floor: approx. 900 mm Overall height above floor: approx. 2,800 mm Minimum hall height: 3,500 mm Parallel deviation (at 20°C): #ERROR! mm Deflection Measured at max. closing force with 2/3 occupancy: ≤ 0.4 mm/m Weight Total weight of the press without operating fluids: approx. 3 t Table cut-out size: 1100x850 mm Speeds Rapid closing speed: 9 mm/sec Pressing speed: 9 mm/sec Sound pressure Sound pressure level, measured at 1.5 m height at control panel per DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics Number of press/travel cylinders: 2 pcs. Operating pressure: max. 280 bar Pressure build-up time (presses): 3–5 sec. Pressure accuracy during pressing stroke: +/- 5 bar Main pump BOSCHREXROTH/PARKER approx. 35 l/min Oil volume: approx. HLP 46 D 150 liters Ambient temperature: max. 40°C Oil temperature: max. 55°C Nkodshmbhqspfx Abbot Flow temperature: °C Cooling circulation pump ACS approx. 6.5 l/min Electrical Main supply: 400 V AC Control voltage: 24 V Frequency: 50 Hz Hydraulic motor connection: Main motor 3 kW Total connected load: approx. 5 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Pressing force: 400 t Nksdpfofh Izmox Abbst Stroke: 900 mm Table size: 1200 x 1200 mm Drawing cushion: 150 t Drawing cushion stroke: 280 mm Shut height: 1100 mm

Stanje: rabljeno, Pressing force 400 kN, table size 450x560 mm, ram size 375x300 mm, distance from table to ram 340 mm, stroke 160 mm, through hole 100 mm diameter, lateral frame passage 220x410 mm. Nksdeum Uuyjpfx Abbst