Hidravlična stiskalnica

EXNER EX SL 160

Leto izdelave: 2003, Stanje: rabljeno, Pressure: 100 t Stroke: 10–130 mm Strokes per minute: 30–90 spm Throat depth: 330 mm Ram adjustment: 100 mm Table area: 950 x 660 mm Ram area: 540 x 440 mm Through-hole in table: Ø 230 mm Table height: 1000 mm Pin hole in ram: Ø 50 mm Total power requirement: 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW feed straightener VRMA 40/78, year of manufacture 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP Isdera Rr Eepfx Ah Aetr

Stanje: zelo dobro (rabljeno), NNP trakasti mešalnik Ijdpfxjtppn As Ah Aetr 300 kg nerjavečega trakastega mešalnika, motor 4 kW, centralno spodnje izpustno vrat, varnostna mreža in pokrov, 3-fazni priključek

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0309, Pressure: 200 t Table length: 2500 mm Table width: 2000 mm Max. stroke: 2050 mm Dimensions L x W x H: approx. 9200 x 4700 x 5800 mm Retracting force: 25 t Machine weight approx. (without operating materials): 50 t Column diameter: 210 mm Table swiveling speed: 25 mm/sec Table extension: 2000 mm Movable table speed: 30 mm/sec Max. table load: 15 t Drive power: 20 kW Adjustable working speed: 1 - 10 mm/sec Approach speed: 10 mm/sec Return speed: 25 mm/sec Rapid traverse speed: 10 mm/sec Oil tank: 400 l Oil cooling (electric): 1.5 kW (max) Platform height: 650 mm Table height: 800 mm Ram height: 850 mm Control system Siemens: S7 1200 Monitor: WEG 12 inch Hydraulics and tank on top of the press: 10,200 ? Surrounding maintenance balcony: 5,000 ? Ejector in table (capacity 30 tons, stroke 250 mm): 4,000 ? Isdpofxyi Djfx Ah Aotr Two controlled hydraulic inlets and outlets: 1,000 ? Rotatable (up to 180°), electrically driven table: 18,000 ? Safety guard around work area: 1,500 ? Table plate tiltable by 75°: 12,000 ? Upper tool foldable: 170 degrees Swivel table: 75 degrees Table tiltable: 75 degrees Ejector with 60T in the ram center: 12,000 ? Ram plate foldable by 180 degrees: 14,000 ? Functioning of the spotting press: Control operation modes: The control features "Manual" and "Semi-automatic" mode. In manual mode (joystick operation): - The table can be hydraulically extended and retracted at max. 30 mm/sec - The table can be hydraulically tilted up to the set angle at max. 25 mm/sec - The ram plate can be hydraulically lowered and folded by 90° and extended up to 180° - Pressureless movement is possible - Pressure can be set via the monitor - The speed can be adjusted between 1 and 10 mm/sec - An additional hydraulic cylinder (core pull, etc.), located on the tool, can be controlled In semi-automatic mode: - The ram can perform rapid traverse up to 10 mm/sec - A pre-programmed cycle (input via monitor) can be executed. Example: - 30 t pressure - Upper limit 300 mm - Lower max. limit 900 mm - Speed change point 850 mm - Rapid traverse at 10 mm/sec - Pressing speed from 850 mm only 10 mm/sec - Dwell time at set pressure or BDC 1 second - Return to upper stop Joystick function: The lever can be pulled (downward motion) or pushed (upward motion). The more it is pulled or pushed, the faster the machine moves. 1 to 10 mm/sec for downward travel and 1 to 25 mm/sec for upward motion are possible. Monitor view: On the large touchscreen monitor, the ram position, set pressure, and active speed are always visible. In semi-automatic mode, all cycle values are displayed. They can be saved or loaded as needed. The control panel consists of two-hand operation, the joystick, the emergency stop button, and the mode selector for: - Table extension/retraction (two-hand operation active) - Table tilt up/down (two-hand operation active) - Ram raise/lower (joystick active) - Ram plate lower/raise (two-hand operation active)

Leto izdelave: 2020, Stanje: novo, An automatic car wash system is a solution that enables you to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of spray pumps. It is designed to ensure that as little liquid as possible is carried over into subsequent processes after washing, saving money and improving washing quality. This is crucial, as the apparent savings from systems that do not utilize these solutions can ultimately lead to much higher costs associated with the disposal of chemicals and waste, which will simply be greater. Attention should also be paid to maintaining the required bath parameters. Research and development have enabled us to develop a car wash system with an optional detail drying function, where hot air is blown onto the parts by a fan after washing. The car wash system is equipped with an advanced macroprogramming system, where each program, depending on the number of tanks, can comprise up to 10 steps. Operations can be repeated, reordered, etc. Itjdefz Nbljpfx Ah Aer Each tank has its own icon and name, allowing the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be operated between processes or at the end of a cycle, for example. • Controls mounted on a pivoting arm for improved accessibility • PLC microprocessor control • 7" touch panel • A very large number of nozzles compared to other solutions • (Optional) Drying function after washing • Capability to create custom advanced programs • Advanced damper system made of acid-resistant sheet steel, double-secured with limit switches • Control system for tight closing and full opening of flaps • To minimize fluid mixing, separate lines, nozzles, and tanks are provided for each treatment • Intelligent control – In case of a power failure or sudden shutdown, fluids cannot be mixed • Fully automatic operation

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150 583, skupna višina: 3.975 mm, nastavitev hidravličnega cilindra: 125 mm, vgradna višina: 410 mm, višina mize: 1.220 mm, skupna širina: 2.725 mm, skupna dolžina: 3.510 mm, dolžina mize: 1.500 mm, širina mize: 1.200 mm, stiskalna sila: 200 t, višina krmilne omare: 2.200 mm, dolžina elektro omare: 340 mm, širina krmilne omare: 600 mm, vrsta vhodnega toka: trifazni, razmak između stupova: 900 mm, razdalja med stranskimi nosilci: 900 mm, razdalja med stojali: 1.520 mm, skupna masa: 3.700 kg, leto zadnje generalne obnove: 2025, ATTENTION: The machine sustained transport damage and will undergo a complete mechanical and electrical overhaul before delivery in 2025/2026. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Slide adjustment: 125 mm Strokes per minute: 30 - 180 Die installation height: 410 mm Table dimensions: 1500 x 1200 mm Itodpew H Arvjfx Ah Ajr (The press will be delivered with a new table plate, T-slot design can be freely selected) Slide dimensions: 1500 x 1000 mm Control system: SIEMENS S7 1500 series, year of manufacture: 2020

Stanje: rabljeno, Leto izdelave: 2006, Pressing force: 250 t Column clearance: 3,000 mm Stroke: 600 mm Distance table/ram, stroke up: 900 mm Table surface: 2,500 x 1,300 mm Table height above floor: 1,050 mm Lateral column passage: 1,350 mm Ram surface: 2,500 x 1,300 mm Downward speed: from 500 mm/s Upward speed: 400 mm/s Working speed: 36 - 64 mm/s Oil capacity: 2,700 l Drive power: 137.0 kW Weight: 54.0 t Space requirements (W x D x H): 4.1 x 4.55 x 6.15 m Approved for manual loading/unloading according to CE standard With electrohydraulic drive, hydraulic shock absorption, hydraulic ram lock Itodpfjvuuhajx Ah Aor No foundation pit required Can be offered non-operational or, alternatively, with new Siemens S7-1500 F control system

Stanje: rabljeno, Leto izdelave: 1997, Pressure: 1000 t Column gap: 1260 mm Stroke: 315 mm Stroke rate: 10, 21 - 42 strokes/min Distance table/ram, at max. stroke up, adj. up: 1295 mm Table surface: 1250 x 800 mm Table height above floor: 670 mm Lateral column passage: 830 mm Ejector force in table: 63 t Ejector stroke in table: 75 mm Ejector force in ram: 16 t Ejector stroke in ram: 23 mm Iodpfx Ahjvuukuj Ajtr Ram surface: 1250 x 800 mm Ram adjustment: 20 mm Feed length transfer: 0 - 250 mm Programmable stroke per rail: 0 - 140 mm Transfer device stroke rate: 42 strokes/min Drive power: 135.0 kW Weight: 120.0 t Space requirement (W x D x H): 5.9 x 4.8 x 7.95 m Height above floor: 6.95 m Height below floor: 1.0 m With DC drive, pneumatic clutch, motorized ram wedge adjustment, pneumatic ram weight compensation, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram locking system, die clamping system for table and ram, motorized recirculating lubrication, oil pulse lubrication, grease lubrication. Press control: Siemens S 5 - CNC 2-axis transfer (Make: Dreher, Type: STV-D Model 350/100-SO, year: 2008), control: Siemens S 7 - Cleaning unit (Make: Beyss, year: 1989) Condition: as is and lies, NOT commissioned, dismantled and stored The press was previously installed in a soundproof cabin (not included in delivery). A video before dismantling is available from the seller.

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno), Used hydraulic press SACK & KIESSELBACH TRP 200. Originally designed as an automatic transfer press, the machine was converted to manual operation in 2012, but can be retrofitted for automatic mode. The press is currently assembled, powered, and in very good condition. Itedpfxehfwqze Ah Ajr Year of manufacture: 2001 Press force in t: 200 Oil capacity in liters: 1100 Stroke in mm: 300 Table dimensions (LxW) in mm: 600 x 600 Installation space in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Rapid approach speed in mm/sec: 375 Working speed in mm/sec: 18 - 40

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno), Used hydraulic press SACK & KIESSELBACH TRP 200. Originally configured as an automatic transfer press, it was converted to manual operation in 2012 but can be retrofitted for automatic operation again. The press is still assembled, powered, and in very good condition. Pressing force: 200 t Oil capacity: 1,100 liters Itedpfjhtaaqjx Ah Aor Stroke: 300 mm Table dimensions (L x W): 600 x 600 mm Installation space: 1,000 mm Upper ejector stroke: 25 mm Upper ejector force: 10 t Total weight: 12,000 kg Operating pressure: 6 bar Rapid approach/descent speed: 375 mm/sec Working speed: 18 - 40 mm/sec.

Stanje: novo, Leto izdelave: 2025, Tlak 315 t Razmak med stojali 2800 mm Fiksni hod 35 mm Število hodov 100 - 250 hodov/min Vgradna višina (hod + zgornja nastavitev kladiva) 560 mm Stranski prehod med stojali 600 mm Površina mize 2700 x 1200 mm Prehodna odprtina v mizi 2450 x 450 mm Površina kladiva 2700 x 800 mm Iedpfjxcp Itex Ah Aotr Teža 80,0 t Zahtevan prostor (ŠxGxV) 5,1 x 2,65 x 5,25 m