Vertikalni obdelovalni centri, X-hod 800–999 mm nakup rabljenega (157)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
Stroji za obdelavo kovin in orodjarne strojne opreme Obdelovalni centri (vertikalni) Vertikalni obdelovalni centri, X-hod 800–999 mm
Dražba
Dražba končana

420 km
Obdelovalni center
Deckel MahoDMC 75 V linear
Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, obratovalne ure: 18.436 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 885 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, kot vrtenja osi B (min.): −10 °, kot vrtenja osi B (max.): 110 °, No reserve price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
X-axis travel: 885 mm
Y-axis travel: 600 mm
Z-axis travel: 600 mm
Rotary axes: B-axis -10° to +110°, C-axis 360°
Feed Rate, Dynamics, and Tool Interface
Maximum feed rate: 90 m/min
X-axis acceleration: up to 15 m/s²
Y-axis acceleration: up to 12 m/s²
Z-axis acceleration: up to 18 m/s²
Kdsdpfx Ahjvrxcpe Deu
Tool interface: HSK-A63
Table and Load Capacity
NC rotary table diameter: 750 mm
Maximum load: 600 kg
Coolant System & Chip Conveyor
Tank capacity: 500 litres
Coolant supply: 40 l/min at 2.3 bar
Chip removal: Efficient scraper belt conveyor (discharge height 850 mm)
MACHINE DETAILS
Operating hours: 18,436 h
Power-on hours: 46,702 h
Rated power: 73 kVA
Rated current: 105 A
Operating voltage: 400 V
Operating pressure: 6 bar
Compressed air connection delivery rate: 30 Nm³/h
Placing a bid constitutes an obligation to collect the item on time by 19/02/2025!
mali oglas

1.368 km
Vertikalni obdelovalni center
Hyundai-WiaF400
Klic
Stanje: dober (rabljeno), Leto izdelave: 2014, Hodi: 800 x 460 x 520 mm,
Velikost stola: 1000 x 460 mm,
Nosilnost stola: 600 kg,
Hitrost vretena: 8.000 min⁻¹,
Moč vretena: 11/15 kW,
Stožčasta odprtina vretena: BT40,
Kdedpfx Ahsu Ehi As Deu
Menjalnik orodij s 24 postajami,
Krmilje Fanuc I serije,
Hladilna tekočina, transporter za odrezke.
mali oglas

516 km
CNC vertikalni obdelovalni center
MATEC30 S
Klic
Leto izdelave: 2007, Stanje: dober (rabljeno), Tehnični podatki so navedeni v priloženi PDF datoteki.
Kdodpsmnp D Isfx Ah Dou
Deli, ki so prikazani z roko, niso priloženi. Vpenjala na mizi niso vključena.
Strojne vpenjalke niso priložene.
mali oglas

481 km
Vertikalni obdelovalni center
KNUTHX-mill 900 L
Klic
Leto izdelave: 2017, Stanje: zelo dobro (rabljeno), Control: Siemens 828 D
Kjdpfoft U S Nex Ah Dodu
Travel X/Y/Z: 850/550/550 mm
Speed: 8,000 rpm
Tool magazine for 24 tools, BT40
Table size: 950 x 550 mm
mali oglas

556 km
Obdelovalni center
GF Agie Charmilles 3 RTOOLPAL U 50760.004
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Pallet changer TOOLPAL 3 R, 12 positions
Kodpfxsr Hngls Ah Dodu
mali oglas

487 km
OBDELOVALNI CENTER
C.B FERRARIB 150
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, potovalna razdalja osi X: 850 mm, pomik osi Y: 420 mm, pomik po osi Z: 420 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, širina mize: 500 mm, dolžina mize: 1.500 mm, največja hitrost vretena: 20.000 obr/min, C.B FERRARI B 150 VERTICAL MACHINING CENTER WITH ELEXA E560 CNC
Kodpfx Aoq N Adcsh Dedu
mali oglas

430 km
Obdelovalni center
HermleC 800 V
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, DESCRIPTION
Hermle C 800 V CNC Vertical Machining Centre, manufactured in August 2000 in Germany. This milling center operates in three axes, with maximum X / Y / Z travel distances of 800, 600, and 500 mm. The machine is equipped with a Sinumerik 840D numerical control system and features a LAN connection to an external computer. Additionally, this machining centre comes with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel probe, and an electrical cabinet cooling unit. The spindle reaches a maximum speed of 15,000 rpm. Recorded spindle hours: approximately 4,500 hours. The total weight of the machining centre is around 7 tons.
Technical specifications of the Hermle C 800 V CNC machining centre
– Travel (X / Y / Z axis): 800 / 600 / 500 mm
– Rapid traverse: 35 m/min
Ksdpfx Ahoiva Dkj Dedu
– Maximum spindle speed: 15,000 rpm
– Oil mist extraction
– Spindle power: 19 kW
– Operating voltage: 400V; 3PH; 50Hz
– Control voltage: 220V AC; 24V DC
– Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m
– Total weight: 7,000 kg
Equipment of the Hermle C 800 V CNC machining centre
– CNC control: Sinumerik 840D
– Tool magazine capacity: 87 slots
– Tool holders: SK40
– Through-spindle coolant pump: 40 bar
– Electrical cabinet air conditioning
– Swivel probe
– Chip conveyor
Available separately as pictured:
Tool pre-setting device
Various SK40 tool holders
Heidenhain TS32 touch probe (as new)
mali oglas

1.368 km
Vertikalni obdelovalni center s četrto osjo
DahlihDL-MCV-1020BA
Klic
Stanje: dober (rabljeno), Leto izdelave: 2008, Přesuny os X, Y, Z: 1020 x 550 x 560 mm,
Stůl: 1250 x 660 mm,
Nosnost obrobku: 1 000 kg,
Kodpfx Ahsu Hyuaj Dedu
Otáčky vřetena: 8 000 ot/min,
Upínací kužel vřetena: BT40,
Výkon vřetenového motoru: 11 kW,
Řídicí systém: FANUC Oi-MC,
Zásobník nástrojů: 24 pozic,
Chlazení vřetenem (centrální chlazení skrz vřeteno).
mali oglas

743 km
Navpični obdelovalni center
BrotherW1000Xd1
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 500 mm, pomik po osi Z: 480 mm, Manufacturer: Brother
Model: W-1000 XD1
Year of manufacture: 2023
Kodjw E Ixlspfx Ah Djdu
Commissioning: 2024
Operating hours: See images
Control system: CNC D00 and plain text dialog programming
Axes: 4
X-axis travel: 100 mm
Y-axis travel: 500 mm
Z-axis travel: 480 mm + column extension 150 mm
4th axis: 360°
Spindle speed: 16 – 16,000 rpm
Spindle taper: BBT-30 (BT-30)
Tool stations: 21 (high-speed tool changer)
Special equipment:
Internal coolant supply 15 bar with self-cleaning pre-filter system
Coolant tank 150 liters
'Twin' chip disposal system for coarse and fine chips, incl. filtration unit
Side automatic door for robot loading
Emulsion mist extraction for work area 700 m³/h
CNC rotary table Brother T200 Ad.L with clamped tailstock
2 x rotary union, 4-channel
Workpiece clamping hydraulic, 80–210 bar
Renishaw laser tool breakage monitoring
Robot interface
Part clamping control via differential pressure sensors (dual)
Machine light; Ethernet interface
Included:
Robot cell
Fanuc 6-axis robot (payload approx. 25 kg)
120-liter immersion tank (heated) for pre-cleaning of components
Automatic part loading and unloading via 12-station pallet changer
The complete system is in as-new condition and can be inspected under power.
Sale direct from owner, no intermediaries.
Dražba
Dražba končana

912 km
Navpični obdelovalni center
HermleC 800 V
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 2.466 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 13147, potovalna razdalja osi X: 800 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, širina mize: 560 mm, dolžina mize: 1.000 mm, TEHNIČNE PODROBNOSTI
Hodi osi
X-os: 800 mm
Y-os: 600 mm
Z-os: 500 mm
Vreteno
Območje obratov: 20 - 12.000 vrt/min
Vpenjalo orodja: SK40
Miza
Dimenzije: 1.000 x 560 mm
Revija za orodja: 30 mest
PODROBNOSTI STROJA
Teža: 7.000 kg
Delovne ure vretena: 2.466 h
Vklopne ure stroja: 34.485 h
Moč: 15 kW (pri 40 % ED)
Frekvenca: 50 Hz
Obratovalna napetost: 400 V
Krmilna napetost: 24 V
Skupni nazivni tok: 44 A
OPREMA
Posoda za ostružke
Krmiljenje Heidenhain TNC430
Merilni sistem Heidenhain
Odvajalni sistem
Kdsdpfx Ahow Nqh Ao Deu
Elektronsko ročno kolo
Dražba
Dražba končana

595 km
CNC obdelovalni center - 4 osi
Deckel MahoDMU 80 E
Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 52.964 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 650 mm, pomik po osi Z: 550 mm, model krmilnika: Heidenhain MillPlus, največja hitrost vretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
X-axis travel: 800 mm
Ksdpfxswnbqgo Ah Dedu
Y-axis travel: 650 mm
Z-axis travel: 550 mm
Control: Heidenhain MillPlus
Table
Table length: 1,100 mm
Table width: 650 mm
Maximum table load: 800 kg
Feed rates
X-axis: 20,000 mm/min
Y-axis: 20,000 mm/min
Z-axis: 20,000 mm/min
Spindle
Spindle interface: 40 ISO / BT / MK
Spindle power: 15 kW
Maximum speed: 12,000 rpm
Tool changer
Number of tools: 24
Number of controlled axes: 3
MACHINE DETAILS
Length: 3,400 mm
Width: 2,400 mm
Height: 2,800 mm
Weight: 8,700 kg
EQUIPMENT
- 4th axis
- Chip conveyor
- Coolant system
- Electrical cabinet
mali oglas

462 km
5-OSNI OBDELOVALNI CENTER
C.B. FerrariA15
Klic
Stanje: zelo dobro (rabljeno), 5-axis machining center, spindle taper ISO 40, 22,000 rpm, X-axis 850 mm, Y 420 mm, Z 420 mm, swiveling and tilting table.
Kedpowcdv Iofx Ah Dsdu
mali oglas

474 km
Obdelovalni center
Mori SeikiMORI SEIKI mv-40E
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 836, • Control system: FANUC MSC-500
• Axis travels:
• X-axis: 560 mm
• Y-axis: 410 mm
• Z-axis: 460 mm
• Table dimensions: 900 × 450 mm
Kodpsv U Endsfx Ah Dodu
• Maximum table load: 700 kg
• Spindle taper: CAT 40
• Maximum spindle speed: 8,000 rpm
• Spindle motor power: 7.5 kW
• Number of tool positions in magazine: 20
• Rapid traverse rates:
• X and Y axes: 20 m/min
• Z-axis: 15 m/min
• Total machine power requirement: 30 kW
• Machine weight: approx. 5,000 kg
• Machine dimensions (L × W × H): 2.48 × 2.25 × 2.8 m
Dražba
Dražba končana

650 km
Navpični obdelovalni center
StamaMC 535 TWIN
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KMM5352002, potovalna razdalja osi X: 800 mm, pomik osi Y: 500 mm, pomik po osi Z: 510 mm, največja hitrost vretena: 10.000 obr/min, število mest v zalogovniku orodij: 42, Robot loading unit is untested
TECHNICAL DETAILS
X-axis: 800 mm
Y-axis: 500 mm
Kdsdpfx Ahowlphno Deu
Z-axis: 510 mm
Control: Siemens 840D
Spindle and Drive
Spindle speed: 36 - 10,000 rpm
Spindle torque: max. 102 Nm
Tool clamping force: max. 12,000 N
Tool holder: SK40
Number of tool positions: 42
Feed Rates
Feed rate x/y/z-axis: 1 - 10,000 mm/min
Rapid traverse x/y/z-axis: 40 m/min
Machining Capacity
Milling capacity: max. 400 mm
Drilling diameter: max. 50 mm
Tapping diameter: max. M30
Motors
Main spindle motor 1+2: Manufacturer Kessler
Power: 21 kW
Speed: 15,000 rpm
Servo motor x-/y-axis: Manufacturer Siemens
Torque: 14.0 Nm
Speed: 3,000 rpm
Servo motor z-axis: Manufacturer Siemens
Torque: 17.6 Nm
Speed: 3,000 rpm
MACHINE DETAILS
Voltage: 400 V / 50 Hz
Total connected load: 70 kW
EQUIPMENT
- Coolant system with paper band conveyor
- Chip conveyor, manufacturer Flender MC535/x=800
- Hydraulic unit, manufacturer HAWE
- Loading system Promo - untested
Dražba
Dražba končana

539 km
Obdelovalni center
HERMLEC 400
Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 16.193 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 500 mm, največja hitrost vrtenja: 15.000 obr/min, število mest v zalogovniku orodij: 38, Kot zasuka osi A (min.): −139 °, zasukni kot osi A (maks.): 91 °, kot vrtenja osi C (maks.): 360 °, A similarly configured machine was recently auctioned off successfully!
Bidding obligates the buyer to collect the machine on time by 31.03.2025!
TECHNICAL DETAILS
Travel X-axis: 850 mm
Travel Y-axis: 700 mm
Travel Z-axis: 500 mm
Control type: Heidenhain TNC 640
Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min
Acceleration linear X-Y-Z: 6 m/s²
Feed force linear X-Y-Z: 7,000 N
Maximum throat clearance: 625 mm
Workpiece dimensions
Maximum diameter: Ø 650 mm
Maximum height: 500 mm
Interference circle (A-axis) at 0° position: Ø 885 mm
Spindle data
Speed: 15,000 rpm
Power/torque: 20% duty cycle, 20 kW / 173 Nm
Tool holder: SK 40
Tool interface
Type: SK 40
Magazine positions: 38
Chip-to-chip time: approx. 6 s
Tool length: max. 300 mm
Tool diameter with adjacent positions occupied: Ø 80 mm
Tool diameter without adjacent positions: Ø 125 mm
Tool weight: max. 8 kg
Ksdpov Hmdqofx Ah Dedu
Magazine load: max. 152 kg
Swivel rotary table
Clamping area: Ø 650 x 540 mm
Centering bore: Ø 32 H7
Swivel range: +91° / -139°
C-axis drive type: Worm drive
A-axis swivel speed: 25 rpm
C-axis rotation speed: 30 rpm
Table load single-sided drive: 600 kg
Accuracy according to ISO 230-2
Deviation (A in X-Y-Z-A-axis): ≤ 0.006 mm
Cooling system (IKZ)
Standard tank capacity: 122 l
Coolant tank capacity: max. 570 l at 40 bar
Pressure: max. 40 bar
Flow rate: 11/27 l/min
Power supply (IKZ): 400 V / 50/60 Hz
Power consumption (IKZ): up to 20 kVA
Filters: Safety filter, paper band filter
Operating pressure
Hydraulic pressure: 120 bar
Compressed air: 6 bar
Lubrication system: Minimum quantity grease lubrication
MACHINE DETAILS
Control on-time: 24,403 h
Machine on-time: 23,349 h
Program run time: 16,193 h
Spindle hours: 13,916 h
Weight: approx. 9.5 t
Power supply
Voltage: 400 V / 50/60 Hz
Power consumption: up to 30 kVA
EQUIPMENT
- BLUM measuring probe
- BLUM tool laser measurement
- Extendable chip drawer
- Swivel rotary table
- Chip flush gun
- Emulsion mist extraction
- Scraper belt conveyor
- Air blow system
- Blowing air through spindle center
- Manual cabin door
- Manual cabin roof
- Polycarbonate safety windows
- Heidenhain electrical heat compensation
- Heidenhain electronic handwheel
Dražba
Dražba končana

682 km
Obdelovalni center - navpično
MORI SEIKIMV 45
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6675 1727 J, potovalna razdalja osi X: 800 mm, pomik osi Y: 460 mm, pomik po osi Z: 510 mm, TECHNICAL DETAILS
Kdedpfewm I Nysx Ah Deu
Travel paths
x-axis travel: 800 mm
y-axis travel: 460 mm
z-axis travel: 510 mm
General information
Machine weight: approx. 8 t
mali oglas

640 km
Rezkalni stroj - vertikalni
KIRAKV-3MCS
Klic
Stanje: dober (rabljeno), Leto izdelave: 1996, x-travel 800 mm
y-travel 340 mm
z-travel 460 mm
Control Fanuc
Machine weight approx. 3.5 t
CNC vertical machining centre
KIRA
Type KV-3MCS
Year 1996
Control Fanuc
Travel axes
X 800 mm
Y 340 mm
Z 460 mm
Kdjdpfx Asv H Sfysh Dsu
Without vices
mali oglas

650 km
Vertikalni obdelovalni center
+GF+AgieCharmilles Mikron XSM 800
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Splošni podatki
Teža stroja: 8300 kg
Krmilna enota
Znamka: HEIDENHAIN
Model: iTNC 530
Glavni pogon
Območje hitrosti vretena: 36.000 min⁻¹
Število osi: 3
Pomiki
Pomik po X-osi: 800 mm
Hitri pomik po X-osi: 80 m/min
Kdodewg Ibpopfx Ah Dsu
Pomik po Y-osi: 600 mm
Hitri pomik po Y-osi: 80 m/min
Pomik po Z-osi: 500 mm
Hitri pomik po Z-osi: 80 m/min
Orodja
Največja teža orodja: 1,5 kg
Največji premer orodja: 25 mm
Največja dolžina orodja: 150 mm
Tip vpenjalnega stebla: HSK-E50
Stroj +GF+ AgieCharmilles Mikron XSM 800, 3-ose, je bil izdelan leta 2007. Gre za vertikalni obdelovalni center naprednih zmogljivosti za zahtevna in kompleksna obdelovalna opravila. Izkoristite priložnost za nakup vertikalnega obdelovalnega centra +GF+ AgieCharmilles Mikron XSM 800. Za več informacij nas kontaktirajte.
Vrste uporabe
Rezkanje
mali oglas

675 km
Navpični obdelovalni center
DahlihMCV 1050
Klic
Stanje: novo, Leto izdelave: 2025, - FANUC 0i-MF Plus "NEW"
- 10.4" LCD color display, MANUAL GUIDE i
Machine Table
- Table size: 1,120 x 560 mm
- Load capacity: 1,000 kg
- T-slot width: 18 mm
- Number of T-slots: 5
- T-slot spacing: 100 mm
- Table height from floor: 900 mm
Travels and Distances
- Travel X / Y / Z: 1,050 / 560 / 560 mm
- Spindle nose to table surface: 150 - 710 mm
- Spindle center to column: 600 mm
Linear Axis Guides & Speeds
- Box ways on X / Y / Z axis
- Rapid traverse X/Y/Z: 36/36/34 m/min
- Feed rate during milling: 1 – 10,000 mm/min
- Smallest increment: 0.001 mm
Tool Magazine (CAM Type) / Tool Changer
- Tool holder: BBT-50 (option SK-50)
- Number of magazine slots: 24
- System: random
- Max. tool diameter: Ø 105 mm
- Max. tool diameter with free adjacent slots: Ø 200 mm
- Max. tool length: 300 mm
- Max. tool weight: 15 kg
Spindle
- Spindle taper: BBT-50 BIG-PLUS® (option SK-50)
- Drive type: 2-step gearbox
Kdedpfx Ahjwkf Ize Dju
- Speed range step 1: 80 - 1,500 rpm
- Speed range step 2: 1,500 - 8,000 rpm
- Drive power (30min/continuous): 11 / 7.5 kW
- Torque (30min./continuous): 236/161 Nm up to 369 rpm
- Lubrication: Grease
- Inner bearing diameter: Ø80 mm
- Spindle cooling: Oil
Coolant, Chip, and Compressed Air Management
- Coolant system incl. 400-liter tank and pumps
- External coolant around spindle
- Through-spindle coolant 50 bar
- Bed flushing, 0.85 kW / 130 l/min (option)
- Chip spirals right and left in machine bed
- Chip discharge to machine front
- Chip spiral (option: belt or scraper-type chip conveyor)
- Chip discharge to the left side of the machine
- Compressed air nozzle at spindle (M32/M33)
- Compressed air through spindle (M38/M39), (option)
- Compressed air and coolant gun
Other Equipment
- Swiveling control panel
- Electronic handwheel (wired)
- Centralized oil/air lubrication
- Spindle oil cooler
- Full enclosure
- Work light
- Heat exchanger in control cabinet
- Auto power-off function
- Hand tool set
- Signal light
- Transformer 400 VAC, 50 Hz
- CE Declaration of Conformity
Dražba
Dražba končana

628 km
Contur MMV-900 S
SaeiloContur MMV-900 S
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12090339, potovalna razdalja osi X: 900 mm, pomik osi Y: 600 mm, pomik po osi Z: 550 mm, največja hitrost vrtenja: 10.000 obr/min, število mest v zalogovniku orodij: 36, TECHNICAL DETAILS
X-axis travel: 900 mm
Y-axis travel: 600 mm
Z-axis travel: 550 mm
Control: Siemens Sinumerik 828 D
Kdjdpfx Ajwu Ekdeh Dju
Spindle speed: 10,000 rpm
Tool changer: 36-position
MACHINE DETAILS
Machine number: 12090339
Weight: 4,000 kg
Connected load: 20 kVA
Dražba
Dražba končana

539 km
Obdelovalni center
HERMLEC 400
Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 11.832 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 500 mm, največja hitrost vrtenja: 15.000 obr/min, število mest v zalogovniku orodij: 38, Kot zasuka osi A (min.): −139 °, zasukni kot osi A (maks.): 91 °, kot vrtenja osi C (maks.): 360 °, TECHNICAL DETAILS
Travel distances X-axis: 850 mm
Travel distances Y-axis: 700 mm
Travel distances Z-axis: 500 mm
Control type: Heidenhain TNC 640
Rapid traverse X-Y-Z (linear): 35 - 35 - 35 m/min
Acceleration X-Y-Z (linear): 6 m/s²
Feed force X-Y-Z (linear): 7,000 N
Max. throat gap: 625 mm
Workpiece dimensions
Max. diameter: Ø 650 mm
Max. height: 500 mm
Interference circle (A-axis) in 0° position: Ø 885 mm
Spindle data
Speed: 15,000 rpm
Power/Torque: 20% duty cycle, 20 kW / 173 Nm
Tool holder: SK 40
Tool interface
Type: SK 40
Magazine positions: 38
Chip-to-chip time: approx. 6 s
Max. tool length: 300 mm
Tool diameter with adjacent slots filled: Ø 80 mm
Tool diameter without adjacent slots: Ø 125 mm
Max. tool weight: 8 kg
Max. magazine load: 152 kg
Swivel rotary table
Clamping area: Ø 650 x 540 mm
Swivel range: +91° / -139°
Drive type C-axis: Worm drive
Swivel axis A speed: 25 rpm
Rotary axis C speed: 30 rpm
Table load (one-sided drive): 600 kg
Accuracy per ISO 230-2
Deviation (A in X-Y-Z axes): ≤ 0.006 mm
Cooling system (IKZ)
Standard tank capacity: 122 l
Coolant tank capacity: max. 570 l at 40 bar
Pressure: max. 40 bar
Flow rate: 11/27 l/min
Power supply (IKZ): 400 V / 50/60 Hz
Power consumption (IKZ): up to 20 kVA
Filters: Pre-filter, paper band filter
Operating pressure
Hydraulic pressure: 120 bar
Compressed air: 6 bar
Lubrication system: Minimum quantity grease lubrication
MACHINE DETAILS
Control on-time: 20,178 h
Machine on-time: 19,094 h
Spindle run time: 11,832 h
Weight: approx. 9.5 t
Power supply
Voltage: 400 V / 50/60 Hz
Power consumption: up to 30 kVA
Ksdpfx Aevw Sdqoh Dedu
EQUIPMENT
- BLUM touch probe
- BLUM laser tool measurement
- Extendable chip drawer
- Swivel rotary table
- Coolant spray gun
- Emulsion mist extraction
- Scraper belt conveyor
- Air blast device
- Air blow through the spindle center
- Manual cabin door
- Manual cabin roof
- Polycarbonate safety windows
- Electrical thermal compensation (Heidenhain)
- Electrical manual control module (Heidenhain)
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

mali oglas

817 km
Obdelovalni center - navpično
DOOSANDNM 4500
Klic
Stanje: rabljeno, Leto izdelave: 2016, Travel distance - X: 800 mm
Travel distance - Y: 450 mm
Travel distance - Z: 510 mm
Control: HEIDENHAIN TNC620
Table dimensions (L x W): 1,000 x 450 mm
Number of tool changer positions: 30
Vertical machining center | DOOSAN DNM 4500 equipped with 30-position tool changer, through-spindle coolant system (IKZ), and chip conveyor.
The machine has only 5,365 spindle hours.
The machine is in well-maintained condition.
A video of the machine at its current location is available upon request.
Technical data of the machine will follow shortly.
Kdjdpfxswq S Ale Ah Dou
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: DNM4500 | DNM-4500
mali oglas

697 km
Vertikalni obdelovalni center / 4 osi
PosmillC 1050
Klic
Stanje: dober (rabljeno), Leto izdelave: 2012, Posmill C 1050 / 4 axes,
Year of manufacture: 2012,
Control: Heidenhain iTNC 530,
Travel X/Y/Z: 1050/530/630 mm,
Kdodpfxjwv T Uyj Ah Dju
4th axis: NC rotary table,
Chip conveyor,
High-pressure through-spindle coolant (IKZ),
3D touch probe,
Electronic handwheel,
Tool changer with 30 positions,
SK 40 spindle taper,
Spindle speed up to 10,000 rpm,
mali oglas

715 km
CNC obdelovalni center
EMCOEmcoMill E 900
Klic
Stanje: zelo dobro (rabljeno), EMCO
Model E 900
Control type: SIEMENS SINUMERIK 810 D
Table dimensions: 1000 x 520 mm
Linear guides: ✓
Travel X-axis: 900 mm
Travel Y-axis: 500 mm
Travel Z-axis: 500 mm
Number of axes: 3
Spindle speed: 12,000 rpm
Kjdpfx Aopgng Hjh Dsdu
Spindle taper: ISO 40 - DIN 69871
Tool magazine: 20 positions
Coolant supply through the spindle: ✓
Spindle motor power: 13 kW
Year: 2017
CE-certified machine: ✓
Overall dimensions: 2570 x 2445 x H 2920 mm
Weight: 4300 kg
mali oglas

675 km
Obdelovalni center
DAHLIHMCV-860
Klic
Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stock machine "NEW" – available at short notice! (Subject to prior sale)
Control:
Fanuc 0i-MF Plus, 10.4"
with Manual Guide i & 2 MB NC memory
LOOK-AHEAD function, 400 blocks
Machine Table:
Table size: 950 x 550 mm
Table load: 800 kg
T-slot width: 18 mm
Number of T-slots: 3
T-slot spacing: 150 mm
Travel Ranges:
Travel X/Y/Z: 860/550/550 mm
Spindle nose to table surface: 150 - 700 mm
Linear Guides & Speeds:
Ball guides in X/Y axis
Roller guides in Z axis
Rapid traverse X/Y/Z: 40/40/30 m/min
Feed rate during milling: 0 – 10,000 mm/min
Smallest increment: 0.001 mm
Tool Magazine (CAM-Type) / Changer:
Number of magazine places: 24 (optional 30, 40)
System: random access
Max. tool diameter: Ø 75 mm
Max. tool diameter with free adjacent pockets: Ø 150 mm (40 tools: Ø130 mm)
Max. tool length: 300 mm
Max. tool weight: 7 kg
Spindle:
Spindle taper: BBT-40 Big Plus® (optional DIN 69871 SK-40, SK-40 Big Plus®)
Drive power (30min/continuous): 18.5/11 kW
15,000 rpm direct drive spindle
Spindle oil cooler
Coolant, Chip, and Pneumatic Management:
Coolant system incl. 300 liter tank and pumps
External coolant around the spindle
Chip augers right and left in the machine bed
Compressed air nozzle at spindle (M32/M33)
Compressed air through spindle (M38/M39)
Compressed air and coolant gun
Other Features:
Swiveling control panel
Electronic handwheel (wired)
Centralized lubrication oil/air
Full enclosure
Work light
Heat exchanger on control cabinet
Auto power-OFF function
Hand tool set
Signal light
Transformer 400 VAC, 50 Hz
CE Declaration of Conformity according to European guidelines
Electrical and Pneumatic Requirements:
Electrical connection: 36 kVA
Required pneumatic inlet pressure: 6 bar
Dimensions:
Machine size: W2,260 x D2,900 x H2,775 mm
Required installation space: W3,160 x D3,000 x H3,000 mm
(incl. chip conveyor discharge to the left)
Net weight: approx. 5,400 kg
Included Special Equipment:
Spindle:
- Direct drive spindle SK-40, 15,000 min-1
- Drive power (30min/continuous): 18.5 / 15 kW (FANUC motor)
Tool Magazines / Changer:
- Tool drum magazine with 30 stations, DIN69871, SK-40
Rotary / Additional Axes:
- Preparation for 4th axis (FANUC control), incl. wiring and Harting connector, without axis driver
Coolant, Chip, and Pneumatic Management:
- Bed flushing
- Through-spindle coolant pump with 20 bar pressure, for direct drive spindles
- incl. cartridge filter
- Belt-type chip conveyor incl. chip cart (chip discharge front to left side of the machine)
Air Extraction:
- Extraction unit AR Filter ARNO 2VF “Plus” Series with EPA filter,
motor protection switch, filter condition indicator
accessory kit for AR filter with connection Ø150 mm
Kjdpfx Ajifn N Neh Dedu
Measurement and Monitoring Systems:
- BLUM TC50 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm
- Blum Z-Nano tool length measurement and tool breakage monitoring in the machine, incl. holder
- Auto-door
- Pneumatic interface for workpiece clamping
Available immediately.
Olajšamo vam iskanje
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Vertikalni obdelovalni centri, X-hod 800–999 mm (157)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:
- 10000 40
- 3000X 12
- Aszx 648
- Avtomatski Stroj Za Varjenje
- Centrifugalna Vodna Črpalka 200 M H
- Cnc Rezkalni Stroj In Obdelovalni Center
- Ex Tiskovno Središče
- Gk 800
- Hq 800