Obdelovalni center - navpično

STAMA MC 535 SM

Stanje: rabljeno, Leto izdelave: 1998, X-travel: 800 mm Y-travel: 500 mm Z-travel: 510 mm Total power requirement: 60 kW Machine weight approx.: 10 t Space requirements approx.: m CNC-controlled vertical machining center for bar machining. For 5-axis machining of complex shapes at any angle Fpjdpfx Aot Hwtfoprsk with maximum productivity and accuracy, Model: MC 535 SM Year of manufacture: 1998, # 535 1107 TECHNICAL DATA: Bar diameter/profile size x max. length: 80 x 800 mm (!) Milling slide travel longitudinal X-axis: 800 mm Milling slide travel transverse Y-axis: 500 mm Milling head vertical travel Z-axis: 510 mm Workpiece axis rotation/swivel: 360°/120° Installation height under vertical spindle approx.: 350 mm Spindle taper: HSK 63 Spindle speeds, infinitely variable: 36 - 10,000 rpm Feed rate all 3 axes: 1 – 10,000 mm/min Rapid traverse: 40,000 mm/min Spindle drive: 22 to 32 kW Total drive: 60 kW - 380 V - 50 Hz Weight approx.: 10 t Accessories / Special equipment: - CNC path control FANUC Type 16iM, for all 5 axes with display, direct input, various subprograms, tool corrections, tool monitoring, parallel programming, and much more - Bar loader magazine on the left side of the machine for up to 10 bars, each Ø 80 mm - Integrated CNC rotary-swivel device with collet chuck for bar material, in combination with hydraulic tailstock as counter-support - Automatic tool magazine with 66 tool positions, Ø 125 x 300 mm length - Tools also with ICS (internal coolant supply), independent tool data management, chip-to-chip time 4 sec - Tool breakage monitoring via laser light barrier, etc. - Gripping and swiveling unit to hold the workpiece during cut-off milling, remove it from the remaining bar, and transfer to a conveyor as a finished part - Fully enclosed working area, chip conveyor included, but without coolant system - Touch probe system for workpiece measurement possible, water-cooled milling spindle, various collets, no tools included Very robust machine.

Stanje: rabljeno, Leto izdelave: 2012, x-axis travel: 630 mm y-axis travel: 800 mm z-axis travel: 750 mm Control: SIN 840D sl Siemens B axis: 360 x 0.001° A axis: -200 to +25 x 0.001° Spindle speed – infinitely variable: 20 – 18,000 rpm Drive power 100% duty cycle: 28.00 kW Drive power 40% duty cycle: 34.00 kW Torque at 40% / 100% duty cycle: 110 / 84 Nm Tool holder: HSK 63 Feed rate X/Y/Z axis: 1 – 100,000 mm/min Rapid traverse X/Y/Z: 100.00 m/min Feed force X/Y/Z: 9 / 6 / 9 kN B-axis feed: 1 – 14,400°/min A-axis feed: 1 – 7,200°/min Pallet size: 2x 500 x 500 mm Max. workpiece weight: 400 kg Max. workpiece diameter: 800 mm Max. workpiece height: 800 mm Tool magazine with 63 positions Max. tool diameter: 280 mm Max. tool length: 550 mm Max. tool weight: 15.00 kg Fjdpfxjvxwxvo Apropk Total connected load: 65.00 kW Machine weight approx.: 14.00 t Space requirements approx.: 5.50 x 3.50 x H3.20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage monitoring, and emulsion mist separator. Machine was integrated in a production line, therefore supplied without chip conveyor and without coolant system.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 120 mm, pomik osi W: 450 mm, For sale: Hauser S35-400 Coordinate Grinding Machine The machine is in excellent condition and was partially overhauled for €15,000 in 2024. It comes equipped with 6 high-quality grinding spindles, a face spindle, and turbine spindles. TECHNICAL DATA Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 120 mm W-axis travel: 450 mm U-axis travel: 5.5 mm Taper grinding: max. 16° Table size: 600 x 380 mm T-slots: 6 pcs, 10 mm width, 50 mm spacing Table load: 300 kg Speeds and Tool Holders Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm 80S: F6 Speed 80S: 40,000 - 80,000 rpm T10/T16: Ø 3 mm Speed T10/T16: 100,000 / 160,000 rpm Slot grinding attachment: 2,900 - 34,500 rpm Planetary movement: 5 - 250 rpm C-axis: 0 - 5 rpm Feed rate X/Y: 0 - 1,200 mm/min Feed rate W-axis: 900 mm/min Feed rate Z-axis: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measuring accuracy: 0.001 mm Basic deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ Operating pressure: 5 bar Footprint: 3.5 x 4.4 m Machine height: 3.5 m Connected load: 8.3 kVA Weight: 3.1 t EQUIPMENT - Slot grinding attachment - Rotary table, 300 mm diameter - Tilting table, 200 mm diameter - Coolant system - Extraction unit - Premium accessories included Transport and loading can be arranged throughout Europe at extra cost, upon request. All prices are subject to VAT. Viewing by appointment only. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Fsdpfxswtqths Aprepk Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality and cost-effective metalworking machine for your production? Or would you like to sell yours? For further information or contact details, please visit our website.

Stanje: novo, Leto izdelave: 2026, Table length: 3000 mm Table width: 1500 mm Torch heads: 1 Fpjdpfxowh Ulqo Aprok Control: CNC Workpiece weight: 900 kg Travel speed: 91 m/min Space required, approx.: 5562 x 2270 x 2388 mm Laser cutting system with manual shuttle table Configuration: 1. BodorPower laser source 6 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed with mortise and tenon structure 5. Bodor servo motor and drive 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout for leftover material 9. 21.5-inch touchscreen monitor 10. Automatic cutting gas pressure adjustment 11. Active anti-collision feature 12. Intelligent vibration protection 13. Anti-burning mineral cast frame 14. Bodor Mango ® ergonomic remote control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Fume extraction 20. Set of wear parts CUTTING CAPACITY: Mild steel: 20 mm Stainless steel: 18 mm Aluminum: 14 mm Total rated machine power: 36.4 kW Total rated machine current: 69.2 A Average power consumption: 23.1 kWh OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Ponujamo rabljeno hidro-toplotno napravo za obdelavo lesa IWT Moldrup-SPP Industrijska naprava MOLDRUP-SPP je zasnovana za hidro-toplotno modifikacijo lesa premerov do 2.600 mm in dolžin do 12.000 mm. Izdelana je iz robustnega nerjavečega jekla ter konstruirana za neprekinjeno industrijsko proizvodnjo z v celoti avtomatiziranim PLC-krmiljenjem. Industrijska hidro-termična naprava za obdelavo lesa – Ø2.600 x 12.000 mm Industrijska naprava za hidro-toplotno obdelavo je namenjena učinkoviti in enakomerni termični modifikaciji lesa v nadzorovanem, kisika prostem okolju. Jedro naprave predstavlja robusten nerjaveč jekleni avtoklav Ø2.600 mm × 12.000 mm, ki omogoča obdelavo približno 15–22 m³ lesa na eno polnjenje, pri obratovalnem tlaku do 12 bar (absolutno). Popolnoma avtomatiziran sistem s PLC-krmiljenjem omogoča natančen nadzor vakuuma, tlaka, temperature in večfaznih procesnih ciklov. Integriran vakuumski sistem zagotavlja varno odstranjevanje kisika, medtem ko sistem ogrevanja s termalnim oljem skrbi za natančno upravljanje temperature tekom celotnega postopka. Celotna postavitev obsega tlačno posodo, ogrevalni sistem, vakuumsko črpalko, cirkulacijski ventilator, sistem za ravnanje s kondenzatom, nakladalni voziček ter varnostno opremo. Priloženi so tudi agregat za ogrevanje s termalnim oljem (boiler skid) in naprava za nadzor emisij. Tehnična dokumentacija je na voljo na zahtevo. Hidro-toplotna naprava za obdelavo lesa se prodaja v videnem/obstoječem stanju. Za vsa dodatna vprašanja ali več informacij nam lahko pišete ali nas pokličete. Fpodpfx Ajymxqajprsk

Stanje: dober (rabljeno), Leto izdelave: 2007, potovalna razdalja osi X: 750 mm, pomik osi Y: 750 mm, pomik po osi Z: 725 mm, CNC control Sinumerik 840D NC rotary table B-axis Magazine for 320 tools Pallet changer device, 2 pallets 500mm x 500mm Internal coolant supply ICS (80 bar) Chip conveyor Coolant system Technical data: X-travel longitudinal: 750 mm Y-travel vertical: 750 mm Z-travel cross: 725 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 50–10,000 rpm Tool positions in changer: 320 Feed rate: 60,000 mm/min Rapid traverse: 60 m/min Spindle drive capacity 40/100% duty cycle: 37/24 kW Machine weight approx.: 15,000 kg Fpodpeq Ui Hqjfx Aprsk Technical data, accessories and machine description are not binding.

Stanje: rabljeno, Leto izdelave: 2017, potovalna razdalja osi X: 435 mm, pomik osi Y: 465 mm, pomik po osi Z: 560 mm, teža obdelovanca (maks.): 80 kg, skupna višina: 2.755 mm, skupna dolžina: 3.360 mm, skupna širina: 3.870 mm, skupna masa: 8.500 kg, nos vretena: MAS BBT 40, Matsuura MX-330 - PC10 Vertikalni 5-osni obdelovalni center CNC krmiljenje Matsuura G-Tech 31 i Velikost mize: ø 130 mm Nosilnost mize: 80 kg Število palet: 10 Največji premer x višina obdelovanca: 330 x 300 mm Pomik po X-osi: 435 mm Pomik po Y-osi: 465 mm Pomik po Z-osi: 560 mm C-os (vrtenje mize): 360° A-os (nagib mize): -125/+10° Hitrost vretena: 50 – 15.000 min⁻¹ Vreteno MAS BBT 40 Moč vretena: 7,5/5,5 kW Fpodpfx Aey Ny Akoprok Kapaciteta zalogovnika: 90 Za vprašanja o stroju smo vam na voljo po telefonu ali e-pošti. Oglejte si tudi naše druge oglase za popoln pregled naše zaloge.

Stanje: rabljeno, Leto izdelave: 1993, Oznaka stroja: Dekanter centrifuga Proizvajalec: Alfa Laval NX 4045 Tip: 919B-31G Leto izdelave: 1993 Najv. hitrost bobna: 3250 1/min Material: Nerjaveče jeklo Pogonski motor: 18,5 / 21 kW Notranji premer bobna: 353 / 198 mm Notranja dolžina bobna: 1200 mm Dovoljena gostota usedline: 1,2 kg/dm3 Dimenzije: Dolžina 3000 x Širina 1000 x Višina 1150 mm Lastna teža: 2500 kg Fodpfxowid Nhs Aprjpk Tehnična dokumentacija: Da Opomba: Vrtinčna zavora Oprema: En krmilni omar Stanje: Rabljeno Cena: Po dogovoru

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 2103 XXXXXX, The FPS 300M, successor to the DECKEL FP1. Based on our many years of service experience, we decided to develop and manufacture our own milling machines. The FPS 300M is a conventional milling machine, perfectly suited for both training and production. Control 3 axes – FPS Aktiv – digital display Spindle speed 40 – 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque and milling performance Feed 5 to 500 mm/min, continuously adjustable Rapid traverse 1.5 m/min Fjdpfx Ash I Nqwjpropk Quill Extendable quill, vertical 60 mm SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angle table 600 x 210 mm Equipment • Vertical and horizontal spindle • Milling head manually tiltable +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc. Further technical data can be found in the attached data sheet.

Leto izdelave: 1990, stanje: rabljeno, 2. Tool Turret Heads, Manufacturer: DUPLOMATIC, Year approx. 1990, Type: BSV-N250 8/20-110/50 Fsdpfsbaf Spex Aprspk Tool holder size: VDI50 Number of tool stations: 8 positions Center height: 125 mm Price per piece.