Fina stiskalnica za slepi tisk

FEINTOOL HFA 6300

Stanje: rabljeno, Leto izdelave: 1979, Wheel diameter - max. 350 mm Wheel width 350 mm Module - max. 8 Module - min. Total power requirement 7.5 - 22 kW Nledpfx Abet Hwxzezoi Machine weight approx. t Space requirement approx. m Gear hobbing machine with slotting device, 2-cut, broaching slotting device, without hydraulic unit

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, 630T stiskalnica, nadgrajena leta 2010 s strani podjetja LITOSTROJ RAVNE Zmogljivost: 630 ton Skupna moč: 15 - 630 ton Moč obroča: 10 - 230 ton Dvižna moč: največ 50 ton Moč povratnega pritiska: 5 - 120 ton Moč izmeta: največ 22 ton Maksimalni hod drsnika: 180 mm Hod obroča: 30 mm Hod povratnega pritiska: 30 mm Površina drsnika: 900 x 900 mm Površina mize: 900 x 900 mm Število hodov: 28 - 72 udarcev/min Njdpjhh Hwlefx Abzjli Potrebna moč: 80 kW Standardna konfiguracija

Leto izdelave: 1992, Stanje: zelo dobro (rabljeno), Rabljena hidravlična stiskalnica tipa H, 700 ton, naprodaj Proizvajalec: Muller Kapaciteta (ton): 700 Število batov: 2 Nljdpfx Ajhcfzkobzei Mere mize (x-y/mm): 4000×2200 Mere drsnika (x-y/mm): 4000×2200 Hod (mm): 1400 Svetla višina v zgornjem položaju (mm): 1920 Moč nasprotnega pritiska (tona): 400 Hod nasprotnega pritiska (mm): 500

Stanje: rabljeno, Leto izdelave: 1968, Faceplate diameter 1000 mm Nlodpowhqzzsfx Abzji Swing over support 1200 mm Centre distance 1500 mm Bed recess . Machine weight approx. 6 t

Stanje: dober (rabljeno), Leto izdelave: 2006, Technical Data – QTN-250M (Turning Length 1000 mm) Chuck Size: 10 inches Maximum Swing Diameter: 677.5 mm Standard Turning Diameter: 430 mm Maximum Machining Diameter: 633 mm Maximum Machining Area: 677 mm Maximum Turning Length (Z-axis): 1000 mm Bar Capacity: 77 mm Spindle Nose: A2-8 Main Spindle Speed: 30–4000 rpm Main Spindle Motor Power (30-minute rating): 25 kW (36 HP) Maximum Main Spindle Torque: 355 Nm (36.0 kgf·m) Tailstock: • Quill Type: Morse Taper No. 5 • Maximum Tailstock Travel: 1050 mm • Maximum Thrust: 12 kN (1200 kgf) Turret: • 12 Tool Stations • Tool Sizes: • External Turning Tool: Ø40 mm • Internal Turning Tool: Ø20 mm Nlsdpswfynfsfx Abzsi • Milling Drill: Ø20 mm • Thread Milling Tap: M12 Milling Spindle: • Speed: 25–4500 rpm (optionally 6000 rpm) • Motor Power: 5.5 kW (7.5 HP) • Maximum Torque: 35 Nm (3.6 kgf·m) Coolant Capacity: 160 liters Machine Dimensions: • Width: 1780 mm • Overall Height: 2533 mm • Floor Space Requirement: approx. 4.51 m² • Machine Weight: approx. 5200 kg 1x Chip Conveyor 1x Tray Pictures to follow shortly

Stanje: rabljeno, Leto izdelave: 1989, Maximum wheel diameter: 400 mm Wheel width: 275 mm Maximum module: 6 Machine dimensions: 300 x 330 x 245 cm Machine weight: approx. 5.5 t Specification: Maximum wheel diameter: 400 mm Minimum module: 1 Maximum module: 6 Table diameter: 370 mm Maximum wheel diameter: - with counter support: 340 mm - without counter support: 400 mm Maximum axial displacement: 275 mm Maximum tangential adjustment: 100 mm Helix angle of teeth: 45 degrees Maximum cutter diameter: 145 mm Maximum hob length: 170 mm Nsdpfsu A I Elox Abzsli Hob speed range: 63–180 rpm Axial feed, steplessly adjustable: 0.2–10 mm/rev Tangential feed, steplessly adjustable: 0.1–5 mm/rev Radial feed for spur gears: 0.1–4 mm/rev Radial feed for worm gears: 0.025–1 mm/rev Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial for spur gears: 400 mm/rev Radial for worm gears: 100 mm/rev Motor power: 7.4 kW

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine Nodpfxohigmbo Abzoli LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Leto izdelave: 1990, Stanje: skoraj kot novo (rabljeno), Gebrauchte Schuler Hydraulikpresse zu verkaufen Hersteller: Schuler Nlsdpjhcnxrefx Abzoi Modell: Schuler EB 2-500-2.75-0.85 H-Rahmen Hydraulikpresse Presskraft: 500 Tonnen Tischmaße (X-Y/mm): 3000×1800 Stößelmaße (X-Y/mm): 3000×1800 Hub (X/mm): 850 Hübe pro Minute: 12 bis 24 Steuerung: Siemens S7 Neue Hydraulikpressen ebenfalls verfügbar

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Nledsd Nb A Nspfx Abzsi Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, Oprema: 1 desni vlek sani 1 ekscentrična stiskalnica 250 kN 4 normalni agregat sani Nodpor D N Eqsfx Abzeli 1 ozek agregat sani Delovno območje: Debelina žice: do 6,0 mm Širina traku: do 80 mm Dolžina vleka: do 520 mm Zmogljivost: 10 - 250 kosov/min.