Obdelovalni center

Röders Tec RP 800

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Portal machining center for HSC milling The machine operates within a Röders RCM Automation unit, making it suitable for integration into automated production lines. Technical Data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Spindle speed: 36,000 rpm – Fischer motor spindle - Spindle taper: HSK E50 - Feed rate: up to 60 m/min Work Table - Dimensions: 900 mm x 700 mm - Max. workpiece weight: 800 kg Control System - Röders HSC RMS6, including software for: Milling simulation and section editing - Electronic hand-held control panel and mouse Iedpfx Adovri Nmskoap - Ethernet interface integrated in Windows NT - Remote maintenance for RSM6 machine control Machine Design - Portal configuration with temperature-stabilized machine bed Tool Changer - 30 stations with collision monitoring Equipment - Cooling unit for milling spindle - Infrared measuring probe for automatic: Tool length compensation, diameter measurement, and tool breakage monitoring - Microjet spray cooling and lubrication device - Fixed bearing and spindle nuts water-cooled - Full protective enclosure (suitable for crane loading) - Connection for work area extraction system - 2 screw-type chip conveyors - Workpiece cleaning via separate air nozzles Machine Data - Footprint (without service areas): LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load: 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and servicing have been carried out regularly. An inspection under power and with material can be arranged by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical modifications and errors excepted.

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. Iasdpfx Adsfg Rlcjkjp The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Leto izdelave: 2020, stanje: novo, Available from stock Band dimensions: 4420 x 34 x 1.1 mm Cutting capacity (rectangular): 360 x 400 mm Cutting capacity (round): 360 mm Bundle cutting: 180 - 280 x 50 - 160 mm Cutting speed: 35 - 85 m/min Main drive motor power: 3.75 kW Hydraulic pump motor power: 0.75 kW Coolant pump motor power: 0.125 kW Table height: 755 mm Weight: 1,680 kg Ijdpfoiryf Sex Adkoap Dimensions (W x D x H): 2400 x 2120 x 1840 mm

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system Ijdsd Iipxopfx Adkoap

Stanje: novo, Leto izdelave: 2024, največja višina reza: 150 mm, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, BERG+SCHMID Double Mitre Band Saw GBS 218 Eco AutoCut Cutting Speed: 25-80 m/min • Mitre cuts left up to 60° • For cutting steel, stainless steel, and aluminum profiles • Quick-action vice with rapid clamping device a. • Integrated blade tension control b. • Carbide blade guide c. • Electric coolant system Iodpfjt I R Edox Adkeap • Machine base (supplied disassembled) The AutoCut system consists of: • Hydraulic cylinder, feed control, spring package, end switch, enabling three operating modes: 1. Automatic lowering of the saw frame via hydraulic cylinder with steplessly adjustable feed control valve and limit switch at the end of the cut 2. Rapid descent of the saw frame from rest position to the workpiece, then switches to normal feed rate 3. Manual operation – hydraulic cylinder functions as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Additional accessories such as saw blades, roller conveyors, length stops, minimum quantity lubrication, etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Control: Heidenhain TNC 640 Working Area Travel X: 1,020 mm Travel Y: 520 mm Travel Z: 610 mm Clamping surface (L x W): 1,160 x 520 mm Table load: 750 kg Spindle Speed: 15,000 rpm direct Tool holder: SK40 (BigPlus) DIN69872 General Tool changer: 30-position (double gripper) Machine bed: High-strength Meehanite cast Repeatability: 0.008 mm Iajdpfet Dizvox Adksp Chip management: Chip conveyor incl. chip flushing in the working area Coolant management: Internal coolant supply (IKZ 30 bar) Cooling air: Programmable external cooling Temperature management: Automatic spindle cooler Jog support: Electronic handwheel Workpiece and working area cleaning: Flush and air gun Coolant cleaning: Oil skimmer Network connection: Ethernet interface

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed speed (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5000 [kg] - Distance from table center to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2500 [mm] - Max. workpiece height: 1850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] MACHINE HOURS - Operating hours: 15,446 [h] ACCESSORIES - Control: Fanuc 31i-model B5 Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * Through-spindle coolant supply (IKZ) * with paper filter Iodpfjw Ephbjx Adksap * with coolant chiller * with rinse gun * with cabin wash - Chip conveyor - Spindle cooling - Tool measurement probe - Workpiece measurement probe: Renishaw RMP60 - Tool breakage control: SOFT AC - Number of pallets: 2 - Machine vice - Tool holder

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Nous proposons ici divers systèmes 3R d'occasion. Les systèmes sont en très bon état et entièrement fonctionnels. Visite possible sur rendez-vous. Pos 1 Système 3R-203 Élément rotatif WEDM 360° Pos 2 Système 3R-201J Adaptateur WEDM 90° Pos 3 Système 3R-201J Adaptateur WEDM 90° Pos 4 Système 3R-201J Adaptateur WEDM 90° Pos 5 Système 3R-202 MiniBlock Pos 6 Système 3R-202 MiniBlock Pos 7+8 Système 3R-204 Adaptateur de réglage en hauteur WEDM Pos 9 Système 3R-218/30S Jeux de supports Pos 11 Système 3R-602.21 Mandrin manuel Macro Pos 12 Système 3R-294.3 Étau Iajdpexqn Ubefx Adkep Pos 14 Système 3R-292.3 SuperVice Pos 15 Système 3R-293.3 SuperVice Pos 16 Système 3R-292.06 HP SuperVice Magnum Pos 17 Système 3R-200-4J-2 470mm Système 3R-200-4J-2 470mm Système 3R-200-4J-2 330mm Système 3R-200-4J-2 138mm Pos 18 Système 3R-239–545 0006-V01 Système 3R-239–495 Expédition et visite possibles !

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Zapiralna sila: 110 t Premer polža: 22 mm Volumen vbrizga: 41 cm3 Razmerje L/D polža: 20 Izračunan delovni volumen: 41,8 cm3 Pravi vbrizgalni tlak: 2.864 bar Najv. vrtljaji polža: 500 min Iaodpfxsu Eki Se Adksp Polžni moment: 150 Nm Kontaktna sila šobe: 250/40 mm/kN Zunanji tok vbrizga: 76 cm3/s Grelna moč cilindra: 6,3 kW Število grelnih con: 4 Tip: Horizontalen Pogon: Električni

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Iedourc S Rspfx Adkeap Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system