Stružnica z vodilno/pogonsko vreteno, premer struženja nad posteljo 300–399 mm nakup rabljenega (189)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Stroji za obdelavo kovin in orodjarne strojne opreme Stružnice Stružnica z vodilno/pogonsko vreteno, premer struženja nad posteljo 300–399 mm
Mali oglas
Waiblingen
519 km
Center stružnica
ColchesterTriumph VS 2500
Pokliči
Stanje: rabljeno, Leto izdelave: 2003, številka stroja/vozila: 1527, rabljeni vodilno-vlečni stružnica COLCHESTER Triumph VS 2500
Višina konic: 195 mm
Medosna razdalja: 650 mm
Vretenska odprtina: 54 mm
Ijdpex Hrumofx Adkeap
Neomejeno nastavljiva hitrost od 14 do 2500 obr/min
Pinola konjička MK5, hladilna naprava, hitra naprava za rezanje navojev
Digitalni prikaz FAGOR NUP 300 TS-RS.
1 x RÖHM trije-čeljustni vpenjalnik, 5-pozicijski bobenski omejevalnik, vzdolžni omejevalnik vretena,
Strojna luč, 1 x PARAT 4-pozicijska revolverska glava, 4 x PARAT izmenjljivih nosilcev,
soječ konjiček in hitro-vpenjalna vrtalna glava.
Stroj je pri nas v 71334 Waiblingen-Beinstein in je takoj na voljo. Ogled stroja je mogoč po dogovoru.
Mali oglas
Werdau
544 km
Center stružnica
WEILERCondor
Pokliči
Stanje: dober (rabljeno), Distance between centres: 800 mm
Spindle bore: 38 mm
Centre height: 165 mm
Swing diameter over bed: 330 mm
Swing diameter over cross slide: 170 mm
Spindle speed: 24–2800 rpm
Dimensions: 1600 mm x 600 mm x 1250 mm
Weight: 850 kg
Iodpfjukrtnox Adksap
Mali oglas
Pfullingen
505 km
Center stružnica
GDWLZ 330 V
Pokliči
Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LZ280/3, premer struženja nad prečnim suportom: 190 mm, izvrtina vretena: 43 mm, premer struženja: 330 mm, premer struženja nad ležiščem sani: 330 mm, višina središča: 165 mm, stružna dolžina: 670 mm, poteza s peresom: 90 mm, premer tulec: 45 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 30 obr/min, GDW Precision Lathe LZ 330 V EconomyLine
The LZ 330 V EconomyLine is a powerful lead and feed screw lathe with stepless speed control ranging from 30 to 4000 rpm. The standard paintwork includes RAL 7035 (light grey) for the enclosure and RAL 7016 (anthracite grey) for the base, splash guard, and chuck guard.
Features & Accessories:
✅ 3-axis position display with 6" colour screen
✅ Multifix A quick-change toolpost, including one turning tool holder
✅ Coolant system & central lubrication
✅ Chip tray, splash guard & spindle brake
✅ LED machine light & K32 collet rack
✅ Electromechanical cut-off device for threading/feed
✅ Tool cabinet with telescopic slide-out, including operating tools
Iedpfjv Dan Dex Adkoap
Additional Equipment Package (optional):
➕ 3-jaw chuck Ø 160 mm (up to 4600 rpm)
➕ Quick-action drill chuck (3-16 mm, B16/MK3)
➕ Live centre MK3 & boring tool holder
➕ 4 additional turning tool holders & 1 boring tool holder
📦 Delivery:
✔️ Disposable packaging & secure transport including insurance
Perfect for precise and demanding turning operations in industrial and craft applications! 🚀

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Schijndel
924 km
Sredinska stružnica
EmcoEM 17 S
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 50 mm, premer struženja nad ležiščem sani: 340 mm, premer struženja nad zgornjim sanežem: 170 mm, višina središča: 170 mm, stružna dolžina: 700 mm, največja hitrost vretena: 2.350 obr/min, Emcomat 17 S
Vretenova izvrtina: 50 mm
Premer struženja nad posteljo: 340 mm
Iedpfxjxp Hude Adkeap
Premer struženja nad suportom: 170 mm
Razdalja med konicama: 700 mm
Največ 2350 obr/min.
Stružnica ima vzdolžni in prečni podajalnik.
Digitalna dvoosna indikacija.
Opremljena z zasilno zaustavitvijo in zaščito čeljustne plošče
Leto izdelave: 2002
5,3 kW
400 V
Mali oglas
Iserlohn
793 km
Center stružnica
WEIPERTUD 500 e
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 1967, LZ Lathe Manufacturer: WEIPERT TYPE: UD 500 e Year: 1967
Equipped with digital readout, compound rest feed, MULTIFIX tool holder size C, and Forkardt chuck 315 mm.
Centre height: 250 mm
Centre distance: 1500 mm
Spindle bore: 65 mm
Ijdpfju Rd H Isx Adkeap
Spindle speeds: 14 - 1400 rpm
The machine is in good condition.
Odkrijte več rabljenih strojev
Mali oglas
Iserlohn
793 km
Center stružnica
JETGHB-1330
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2010, LZ Lathe, Manufacturer: JET, Model: GHB-1330, Year of manufacture: 2010
Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix tool post size A, 2 steady rests, and coolant system.
Swing over bed: 330 mm
Swing over cross slide: 197 mm
Centre distance: 750 mm
Iasdpoqwgzqefx Adksp
Spindle speeds: 70–2000 rpm
Spindle bore: 38 mm
The machine is in good condition, coming from a training workshop. Machine documentation is available.
Mali oglas
Iserlohn
793 km
Center stružnica
WEILERCOMMODOR
Pokliči
Stanje: potreben popravila (rabljeno), Leto izdelave: 1990,
Mali oglas
Avstrija
237 km
Center stružnica
PINACHOPINACHO SP/165x750
Pokliči
Stanje: rabljeno, Leto izdelave: 1999, Condition used
Year of manufacture 1999
Inventory number 1676
Delivery time prompt, subject to prior sale
Country of origin Spain
Price €10,500
Stock 1
Special price €9,500
Swing over bed 335 mm
Distance between centres 750 mm
Centre height 165 mm
Spindle bore 42 mm
Swing over cross slide 175 mm
Bed width 250 mm
Spindle mount / DIN55027 DIN55022-5 No. 4
Spindle speed 60-2000 (9) rpm
Longitudinal feed 0.05 - 0.75 mm/rev
Cross feed 0.025 - 0.375 mm/rev
Metric threads range 0.5 - 7.5 mm
Module thread range 60
Cross slide travel 245 mm
Iodpfx Aowiqvhsdkeap
Top slide travel 120 mm
Tailstock quill diameter 48 mm
Tailstock taper 3 MT
Tailstock quill travel 140 mm
Motor power 2.2 kW
Length 1800 mm
Width 850 mm
Height 1485 mm
Weight 880 kg
3-jaw chuck Röhm, diameter 300 mm
4-way toolpost with 4 inserts
Chuck guard
Crank offset length 120 mm
Sliding safety guard with integrated machine lamp
Rear chip deflector
Coolant system
Lead and feed screw cover
Foot brake
Operating manual in English
COMPLIES WITH GERMAN UVV & AUSTRIAN AMVO REGULATIONS
Mali oglas
Ubstadt-Weiher
585 km
Center stružnica
WeilerCommodor Geometrisch Überholt
Pokliči
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards
Technical Data:
>> Machine No. 1824
>> Centre height: 180 mm
>> Centre distance: 1,000 mm
>> Spindle speeds: from 13 to 2,000 rpm
>> Spindle bore: 56 mm
>> Short taper spindle nose DIN 55029 size 5
>> Tailstock: MT 4
>> Feeds: 0.026 to 0.888 mm/rev
>> Threads possible: metric, inch, module, and diametral pitch
>> Metric thread pitches: 0.35 to 12 mm
>> Weight approx. 1,500 kg
>> Spindle brake switchable
>> Drive power: 2.0/4.0 kW
>> Length: 2.2 m, Height: 1.5 m, Depth: 1 m
Accessories and Equipment:
>> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual
Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable
>> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws
>> Multifix size B with 2 new tool holders
>> Bed stop
>> Machine feet
>> Coolant system
Iaodsvrcqdepfx Adkjp
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle guard
>> Spindle brake
>> 2 emergency stop buttons
Optional: Lead and feed screw covers
About the Machine:
Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new.
Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.
Mali oglas
Ubstadt-Weiher
585 km
Center stružnica
WeilerCommodor Geometrisch Überholt
Pokliči
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances
Technical Data:
>> Machine No.: 2020
>> Centre Height: 180 mm
>> Centre Distance: 1000 mm
>> Spindle Speeds: from 13 to 2000 rpm
>> Spindle Bore: 56 mm
>> Camlock Spindle Nose DIN 55029 Size 5
>> Tailstock Taper: MK 4
>> Feeds: from 0.026 to 0.888 mm/rev
>> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch
>> Metric Thread Pitches: from 0.35 to 12 mm
>> Weight: approx. 1500 kg
>> Spindle Brake (switchable)
>> Motor Power: 2.0/4.0 kW
>> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m
Accessories and Equipment:
>> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual
Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching
>> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws
>> Multifix size B with 2 tool holders, NEW
>> Bed stop
>> Machine feet
>> Coolant system
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle guard
>> Spindle brake
>> 2 emergency stops
Optional: Lead and feed screw covers available on request
Iedpsvrckqofx Adksap
About the Machine:
For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new.
Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.
Mali oglas
Ubstadt-Weiher
585 km
Center stružnica
EmcoEMCOMAT-17 D
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!!
Technical Specifications:
>> Year of manufacture: approx. 2000, Machine no. D3F H1 010
>> Centre height: 170 mm
>> Swing diameter over bed: 340 mm
>> Swing diameter over cross slide: 190 mm
>> Turning length: 700 mm
>> Spindle speed: 4 speed ranges, stepless from 35–3000 rpm
>> Quill stroke: 120 mm
>> Tailstock: Morse taper 3
>> Spindle bore: 50 mm
>> 20 longitudinal feeds: 0.045 / 0.787 mm/rev
>> 20 cross feeds: 0.023 / 0.406 mm/rev
>> Space requirements: approx. length 1.600 x depth 0.9 x height 1.3 meters
>> Weight: approx. 730 kg
Accessories and Equipment:
>> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual
Functions: Metric/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming (200 positions), taper calculation, radius/diameter, rapid zeroing, count direction switching
>> 1 piece 3-jaw chuck NEW 160 mm, 2 sets of jaws
>> Multifix B tool post with 2 holders
>> Chip guard
>> Coolant system
Iasdowvuf Topfx Adkep
About the Machine:
Offered is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in excellent condition. The machine is naturally fully functional. The bedways are in very good condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new 3-jaw chuck. Take the opportunity to inspect this machine under power on site and see the condition for yourself.
Mali oglas
Ubstadt-Weiher
585 km
Center stružnica
WeilerPraktikant 160B Geometrisch Überholt
Pokliči
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160B Precision Centre Lathe – 3-Axis K&C Digital Readout System (NEW)
Refurbished with acceptance protocol confirming new machine tolerance levels.
Technical Data:
Iaodpfx Aevrdlcsdksp
>> Machine Number: 87 160 760
>> Centre Height: 160 mm
>> Distance Between Centres: 650 mm
>> Spindle Speeds: 24 to 2500 rpm
>> Spindle Bore: 40 mm
>> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet lock
>> Tailstock: Morse taper MK 3
>> Feed Rates: 0.02 to 0.63 mm/rev
>> Thread cutting: metric, inch, module, and diametral pitch threads
>> Metric Thread Pitches: 0.25 to 8 mm
>> Weight: approx. 680 kg
>> Spindle brake, switchable
>> Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m
Accessories & Equipment:
>> 3-axis K&C digital readout system (new), including 12-month manufacturer's warranty and operating manual
Functions: mm/inch switching, coordinate mode ABS/INC, value halving, reference mark, tool memory for up to 200 tools, taper calculation, radius/diameter display, instant zero reset, and count direction switching
>> New collet system, collets NEW from 3 to 25 mm in 1 mm increments
>> Three-jaw chuck 160 mm, new, with 2 sets of jaws
>> Multifix size A toolpost system with 3 tool holders
>> Electronic spindle protection
>> New LED machine lamp
>> New machine mounts
>> Splash guard
>> Operating manual, spare parts list (PDF)
About the Machine:
For sale is a Weiler Praktikant 160 B lead and feed screw lathe meeting toolroom precision, in fully overhauled geometric condition. Refurbished, with acceptance protocol confirming new machine tolerance specification. For operator safety: electronic spindle protection, covered lead and feed screws, 2 emergency stops, and a braking motor. This newer generation of Weiler lathes is highly operator-friendly and can produce ground-quality surface finishes. You are welcome to inspect the machine under power onsite and verify its condition firsthand.
Mali oglas
Ubstadt-Weiher
585 km
Center stružnica
WeilerCondor 81 Geometrisch Überholt
Pokliči
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW)
Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards.
Technical Data:
>> Machine No.: 84-121
>> Centre Height: 165 mm
>> Centre Distance: 750 mm
>> Spindle Speeds: 22 to 2800 rpm
>> Spindle Bore: 40 mm
>> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock
>> Tailstock Morse Taper: MK 3
>> Feeds: 0.015 to 0.46 mm/rev
>> Thread Cutting: Metric, Inch, Module, and Diametral Pitch
Iasdpfx Aowrm Dtsdkop
>> Metric Thread Pitches: 0.18 to 28 mm
>> Weight: approx. 1100 kg
>> Spindle Brake (switchable)
>> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m
Equipment and Accessories:
>> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included
Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction
>> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments
>> 160 mm 3-jaw chuck with 2 sets of jaws (NEW)
>> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders
>> Bed stop
>> Electrical chuck guard (NEW)
>> Rear splash guard
>> Operating manual
>> Coolant system
>> Machine levelling feet
About the Machine:
A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol.
The accessories, collets, and chuck are all new.
For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.
Mali oglas
Ubstadt-Weiher
585 km
Center stružnica
WeilerPraktikant 160B Teilüberholt
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW
Technical Data:
>> Year of Manufacture: 1986
>> Machine No.: 86-160-348
>> Centre Height: 160 mm
>> Centre Distance: 650 mm
>> Spindle Speeds: 8 steps, from 96 to 2500 rpm
>> Spindle Bore: 40 mm
>> Short Taper Spindle Nose DIN 55027, Size 5, with bayonet lock
Iasdpfx Aowthbiodkjp
>> Tailstock: MT 3
>> Feeds: from 0.02 to 0.63 mm/rev
>> Thread Cutting: Metric, Inch, Module, and Diametral Pitch threads possible
>> Metric Thread Pitches: from 0.25 to 8 mm
>> Weight: approx. 680 kg
>> Spindle brake can be engaged
>> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m
Accessories and Equipment:
>> 3-axis Digital Readout from K&C, new, 12-month manufacturer's warranty with operating manual
Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching
>> Collet chuck system, collets as new, range 1–29 mm in 1 mm increments
>> New 160 mm three-jaw chuck with 2 sets of jaws
>> Multifix toolpost size A with 3 tool holders
>> Electric chuck guard
>> Bed stop
>> Rear splash guard
>> Machine feet
>> Coolant system
About the machine:
For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled, refurbished, and repainted in light grey. All carriages move very smoothly and evenly. The machine runs quiet even at high speeds. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see the condition for yourself.
Mali oglas
Ubstadt-Weiher
585 km
Center stružnica
Emco EmcomatEM20D
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!!
Technical Data:
>> Year of manufacture: 1995
>> Center height: 200 mm
>> Swing diameter over bed: 400 mm
>> Swing diameter over cross slide: 250 mm
>> Turning length: 1000 mm
>> Spindle speed: 4 ranges, infinitely variable from 35–3000 rpm
>> Tailstock quill travel: 120 mm
>> Tailstock: MT3
>> Spindle bore: 50 mm
Iodjwag Stopfx Adksap
>> 20 longitudinal feeds: 0.045 / 0.787 mm/rev
>> 20 cross feeds: 0.023 / 0.406 mm/rev
>> Footprint/installation dimensions approx.: length 1.900 x depth 0.9 x height 1.3 meters
>> Weight approx. 850 kg
Accessories and Equipment:
>> 3-axis position display
>> 1 piece 3-jaw chuck with 1 set of jaws
>> Toolholder with 3 pockets
>> Chip guard
>> Coolant system
>> Bed stop
About the Machine:
For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, used very little. The machine is, of course, fully functional. All slides move very smoothly and evenly. The bedways are in excellent condition. Take the opportunity to inspect the machine under power on site and see its condition for yourself.
Mali oglas
Siedlce
853 km
Univerzalni stružnica za kovino
CORMAKTORNADO 360x1000
Pokliči
Stanje: novo, Leto izdelave: 2026, CORMAK 360 Metal Lathe – New, Improved Model!
The CORMAK 360 metal lathe represents a newly enhanced version of a renowned machine tool for metalworking. Key improvements include an upgraded toolpost guard, a reinforced spindle bearing system, a new digital readout, and enhanced suitability for manufacturing plants, workshops, and tool rooms. Perfect for single-item and small-batch production.
NEW, UPGRADED MODEL!!!
High-quality, reinforced spindle bearing system
New guard system compliant with CE standards
Latest axis digital readout model
Reinforced and modernized lathe base with tool drawers and pull-out swarf tray
Iodpfxjiz S R Ne Adkeap
Machine Characteristics:
Reinforced, ribbed bed ensures maximum vibration reduction, with precisely ground and hardened ways
Digital axis readout included as standard
Large spindle bore of 52 mm for optimal productivity
Adequate bed width guarantees stable and precise operation
Equipped with a high-quality, reinforced spindle bearing system
Efficient operation thanks to two automatic feeds and both leadscrew and feed shaft
Hardened gears in the spindle gearbox
Adjustable overload clutch on feed shaft
Wide threading range without the need for gear changes
Feed selection lock: by leadscrew or feed shaft
Removable bridge allows machining of large-diameter components
Pull-out swarf tray and tool drawers for improved efficiency
Technical Data:
Maximum turning diameter: 360 mm
Maximum turning diameter over cross slide: 220 mm
Maximum turning diameter in gap: 490 mm
Maximum turning length in gap: 168 mm
Turning length between centers: 970 mm
Bed width: 187 mm
Spindle nose: D1-4
Spindle bore: 52 mm
Spindle speed range: 90–2000 rpm
Number of spindle speeds: 8 steps
Longitudinal feed range: 0.055 – 1.291 mm/rev
Cross feed range: 0.014 – 0.345 mm/rev
Maximum tool size: 16 mm x 16 mm
Metric thread: 0.4 – 7 mm
Inch thread: 4–60 TPI
Tailstock quill diameter: 32 mm
Tailstock quill taper: MT3
Motor power: 1.5 kW
Pump power: 0.1 kW
Weight: 570 kg
Dimensions: 1890 x 720 x 1500 mm
Standard Equipment:
Axis digital readout (DRO)
3-jaw chuck 200 mm
4-jaw chuck 200 mm
Faceplate
Fixed steady rest
Traveling steady rest
Reducing sleeve
Dead center
Cooling system
Lighting
Full set of change gears
Threading indicator/dial
Service tools
Lathe stand
Polish manual
EU/CE declaration of conformity
Brand new machine – full warranty
For more information, please visit our website.
Mali oglas
Siedlce
853 km
Stružnica-rezkalni stroj
CORMAKTokarko-frezarka TYTAN CENTER 750 VARIO
Pokliči
Stanje: novo, Leto izdelave: 2026, The TYTAN CENTER 750 Vario lathe-milling machine is a combination of two machines, offering convenience of use and space-saving benefits in the workplace. It features variable speed control for the combined turning-milling spindle. Turning capacity: 250x750 mm, 0.75 kW/230 V + Milling: 0.6 kW/230 V. It performs turning functions such as machining external and internal cylindrical surfaces, thread cutting, and parting off workpieces. Milling functions include slot milling, drilling, and reaming. This machine is suited for small industrial businesses, workshops, garages, etc.
Main advantages of the machine
- Combination of two functions – turning and milling – in one compact design.
- Separate spindle motors for lathe and mill with stepless speed adjustment – allows for independent operation of both functions.
- LCD displays for monitoring and precise spindle speed setting.
- Two spindle speed ranges – adaptable to different materials and machining methods.
- Machining of complex components – eliminates the need for re-clamping on a different machine.
- Rigid dovetail guideway – ensures high stability during milling operations.
Technical data
LATHE
3-jaw chuck: 125 mm
Swing over bed: 250 mm
Swing over cross slide: 150 mm
Distance between centres: 750 mm
Bed width: 135 mm
Spindle bore: 29 mm
Spindle taper: MT4
Spindle speed control: Variable (2 ranges)
Spindle speed: 50–1125 / 100–2250 rpm
Metric threads: (18) 0.2–3.5 mm
Imperial threads: (21) 8–56 TPI
Longitudinal feed: (6) 0.07–0.4 mm/rev
Tool post size: 65 x 65 x 20 mm
Max. tool size: 12 x 12 mm
Top slide travel: 70 mm
Cross slide travel: 130 mm
Longitudinal travel: 630 mm
Tailstock quill diameter: 30 mm
Tailstock quill stroke: 70 mm
Tailstock taper: MT2
Motor power (S1/S6): 0.75 / 0.9 kW / 230 V
MILLING MACHINE
Max. drilling diameter: 16 mm
Quill taper: MT2
Quill stroke: 50 mm
Head tilt: –90° to +90°
Spindle to column distance: 170 mm
Spindle to table distance: 43–250 mm
Spindle speed range: 50–2250 rpm
T-slots (number and size): 2 x 8 mm
Iajdpfx Adow H Rdmskep
Motor power: 0.6 kW / 230 V
GENERAL PARAMETERS
Machine dimensions (LxWxH): 1350 x 580 x 1630 mm
Weight: 230 kg
Standard equipment
- 125 mm 3-jaw lathe chuck + reversible jaws
- Machine base
- Fixed centres MT2 and MT4
- Arbor and drill chuck MT2/B16
- Change gears
- Complete set of wrenches, grease gun, service tools
- CE-compliant guards
Mali oglas
Siedlce
853 km
Univerzalni stružnica za kovino
CORMAKTokarka uniwersalna 460x1500
Pokliči
Stanje: novo, Leto izdelave: 2026, Industrial metal lathe CORMAK 460 x 1500 – robust cast iron bed construction, equipped with a 12-speed gearbox and a powerful 5.5 kW / 400V induction motor – delivers maximum torque and features a large 80 mm spindle bore. Recommended for machining hard steels and heavy-duty turning operations. Versatile use for various tasks including internal and external turning, taper turning, polishing, metric and imperial threading, drilling, and broaching.
Machine Description:
Iedpfxericzie Adkeap
- The CORMAK 460 x 1500 universal lathe is suitable for a wide range of tasks, such as turning internal and external surfaces, tapers, polishing, metric, inch, module, and DP threading, drilling, and broaching.
- The robust cast iron bed ensures maximum vibration damping. The bed is also hardened and precision ground. The 300 mm wide bed provides a stable and precise working environment.
- Digital readout operates on three movement axes: longitudinal, cross, and compound slide. Processed electronic signals from optical scales display axis travel values clearly on the digital screen.
- The lathe features a high-quality, reinforced spindle bearing system.
- Optimal performance is ensured by a large 80 mm spindle bore, 250 mm three-jaw chuck, and a powerful 5.5 kW motor.
- Rapid longitudinal and cross feed system significantly reduces machining time and boosts productivity.
- Hardened and ground gears in the spindle gearbox provide long-term operational stability.
- Equipped with both a leadscrew and a feed shaft for threading, as well as automatic longitudinal and cross feed.
- Easy spindle speed and feed adjustment from the ergonomic control panel mounted on the gearbox.
- Wide threading capabilities without the need for change gear replacement: metric (41) 0.1–14 mm, inch (60) 2–112 TPI, module (34) 0.1–7 MP, DP (50) 4–112 DP. Capable of cutting both right- and left-hand threads.
- Thread dial indicator for precise thread pitch tracking, saving time by allowing the operator to disengage and quickly return the carriage to its starting position over multiple passes.
- The bed is fitted with a removable bridge, allowing machining of oversized components such as discs. This lathe model enables turning of workpieces up to 690 mm in diameter with the bridge removed.
Mali oglas
Siedlce
853 km
Univerzalni stružnica za kovino
CORMAKTytan 330 with base
Pokliči
Stanje: novo, Leto izdelave: 2026, Universal metal lathe CORMAK 330x700 with base, 230V. Equipped with a 12-speed gearbox and an induction motor (constant speed) 1.1 kW/230V – maximum torque. Recommended for turning hard steels and mechanical turning operations. Suitable for a wide range of tasks, including internal and external surface turning, taper turning, polishing, metric and imperial threading, drilling, and broaching. This is a semi-professional model, ideal for single and small batch production. Machine delivered with base.
Machine description:
- The machine fully complies with EU directives (CE) as well as Polish regulations and DIN standards.
Technical Parameters:
- 3-jaw chuck: 160 mm
- Max. turning diameter over bed: 330 mm
- Max. turning diameter over cross slide: 220 mm
- Max. workpiece length between centres: 700 mm
- Max. installed part length: 650 mm
- Bed width: 160 mm
- Spindle bore: 38 mm
- Spindle taper: MT5
- Tool post dimensions: 75 x 75 x 20 mm
- Top slide travel: 100 (0.05) mm
- Cross slide travel: 150 (0.1) mm
- Longitudinal travel: 620 (0.5) mm
- Spindle speeds (12): 65, 90, 120, 160, 220, 300, 380, 500, 640, 850, 1100, 1650 rpm
- Metric threads (number/range): (17) 0.5–4 mm
- Imperial threads (number/range): (26) 9–40 TPI
- Longitudinal feed speeds: 0.105–1.396 mm/rev
- Cross feed speeds: 0.022–0.296 mm/rev
- Tailstock quill diameter: 40 mm
- Tailstock quill travel: 70 (0.025) mm
- Tailstock taper: MT2
- Motor power: 1.1 kW / 230V
- Dimensions (L/W/H, with base): 1500 x 730 x 1200 mm
- Weight (with base): 320 kg
Equipment included:
- Set of 16x16 mm turning tools (8 pcs, brazed carbide)
- Lathe base
- 3-jaw 160 mm lathe chuck
Isdpfxemtyi No Adkoap
- Reversible jaws
- Fixed centre: MT3
- Change gears
- Oiler
- Chuck and tool post key
- Service tool kit
- CE-compliant safety guards
- Instruction manual in Polish
- CE declaration of conformity
Stated price is NET price. The price does not include transport costs.
For further information, please contact us by phone or email. Visit our website to see the full offer.
Mali oglas
Bruchsal
586 km
Vodilno/vlečno vreteno stružnica/COMMODOR B
WEILERCommodor B
Pokliči
Stanje: dober (rabljeno), Konvencionalni stružnica WEILER COMMODOR B iz izobraževalne ustanove
-GS - identifikacija
-3-osni digitalni prikazovalnik "NOVO"
-Višina konic 180 mm
-Razdalja med konicama 1000 mm
Iaodpfeyf U E Djx Adkop
-Skozi vreteno 56 mm
-Obrati vretena 15 - 2000 min⁻¹
-Avtomatski vzdolžni in čelni pomiki
-Navojni postopki / metrični / colski / modul / diametralni
-Električna zaščita vpenjalne glave
-2x nujni izklop
-Multifix z vložkom
-Štiriprvemna vpenjalna glava - Röhm
-Zadnja stena za ostružke
-Naprava za hlajenje
-Zelo lepo ohranjen originalni stan
-Dokumentacija
Dimenzije:
DxŠxV 2,3x1,2x1,7 metra / Teža 1600 kg
Možne so napake in napačni vnosi podatkov.
Mali oglas
Hessisch Lichtenau
682 km
Stružnica L + Z, stružnica
WAFUMTUD 40
Pokliči
Stanje: rabljeno, L + Z stružnica WAFUM tip TUD 40
Št. št.: 35689 Leto izdelave: 1975
Razdalja med konicama: 1500 mm
Premer struženja nad posteljo: Ø 440 mm
Iasdpfx Adsw Uf Hwekjp
Višina konice nad posteljo: 220 mm
Višina konice nad suportom: Ø 125 mm
Vrtina vretena: Ø 56 mm
Hitrost vretena: 18 - 1800 min⁻¹, 36 stopenj
Prirobnična prirobnica: kratek stožec DIN 55027, velikost 6
Notranji stožec konjička: MK 5
Pogonska moč: 4 in 6,7 kW
- Hitrost vretena preko 2 motornih hitrosti in 18 stopenj menjalnika
- 3-čeljustna vpenjalna glava Ø 315 mm BISON z 2 kompleti čeljusti (obračalne in vrtalne)
- Hitromenjalni nosilec orodja MULTIFIX velikost B z 2 izmenljivima kasetama
- Fiksna luneta z drsnim ležajem, notranji Ø 125 mm
- Sledilna luneta z drsnim ležajem, notranji Ø 100 mm
- Vodilo za struženje ozkih stožcev z avtomatskim vzdolžnim podajanjem
- 1 kos sledilne centrirne konice
- Dvignljiv zaščitni pokrov vpenjalne glave
Prostorske zahteve D x Š x V: 3100 x 1200 x 1450 mm
Teža: 3000 kg
Dobro stanje
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Erith
1.235 km
Center stružnica
ColchesterTriumph VS 2500
Pokliči
Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LVT50 GMRJA/04069, SPECIFIKACIJE STROJA
Višina med središčema: 195 mm
Premer obdelovanca nad posteljo: 400 mm
Premer obdelovanca nad prečnim sanežem: 246 mm
Premer obdelovanca v izrezu: 585 mm
Širina pred čelno ploščo: 165 mm
Dolžina med središčema: 1250 mm
Hitrosti vretena (brezstopenjsko nastavljivo): 0-2500 rpm
Iaodpfx Aexldidedkop
Priklop vretena: (Camlock) D1-6
Premer izvrtine vretena: 54 mm
Moč vretenskega motorja: 7,5 kW
Širina postelje: 318 mm
Premik prečnega saneža: 250 mm
Premik zgornjega saneža: 130 mm
Premik tulec konjička: 178 mm
Konus v tulcu konjička: št. 5 MT
Pribl. teža: 1800 kg
Stroj v metrični izvedbi
STROJ OPREMLJEN Z:
Digitalni odčitni sistem Newall z 2 osmi
Tričeljustna glava
Hitromenjalni nosilec orodja
Ainjest visokohitrostni dodatek za rezanje navojev
Zaščitni pokrov glave
Osvetlitev
Hladilni sistem
Zadnji zaščitni pokrov
Mali oglas
Weiterstadt
632 km
Klasični stružnica
GDWLZ 250 Leit- und Zugspindeldrehmaschine
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2000, številka stroja/vozila: 1101188, GDW LZ 250 vodilno in izvlečno vreteno stružnica
Leto izdelave: 2000
Višina konic: 125 mm
Razdalja med konicami: 500 mm
Premer vretena: 38 mm
Vretena vpenjanje: DIN 55027/4
Konjiček vpenjanje: MK 3
Območje obratov: 60 - 3.000 vrt/min, brezstopenjsko
Teža: pribl. 600 kg
Dimenzije: pribl. 1.300 x 700 x 1.400 mm
Z vpenjalno tulečo napravo
Z digitalnim prikazovalnikom Iskra
Isdpfxox Slhdo Adkeap
Mali oglas
Hessisch Lichtenau
682 km
Stružnica L + Z, končna stružnica, stružnica
ZMM - SLIVEN (Bulmak - Bulgarien)CU 325
Pokliči
Stanje: rabljeno, L + Z Lathe ZMM - SLIVEN (Bulmak - Bulgaria) Model CU 325
Machine No. 8169 Year of manufacture: 2002
Centre distance: 1000 mm
Swing over bed: 320 mm
Centre height over bed: 160 mm
Swing over cross slide: 190 mm
Centre height over cross slide: 95 mm
Spindle bore: 32 mm
Spindle speed (right rotation): 85 - 2000 rpm, 12 steps
Spindle speed (left rotation): 130 - 1300 rpm, 6 steps
Feed: longitudinal and face
Chuck mounting: short taper DIN 55027 size 5
Tailstock quill taper: MK 3
Drive power: 2.2 kW
Power supply: 400 Volt, 50 Hz
- 3-axis digital readout RSF, model Z 730
- Spindle speed with 12 geared steps in machining direction
- Spindle speed with 6 geared steps opposite to machining direction
- 3-jaw chuck BISON Ø 160 mm with 1 set of stepped jaws
- 4-way universal tool post
- Coolant tank with pump integrated in the machine base
- Spindle brake via direction lever
- Emergency stop via foot pedal and emergency switch
- Hinged chuck guard
- Machine lamp
- Splash guard
- Follow rest
Ijdpfx Adsvt U Tmjkeap
- Quick-action drill chuck with MK 3 taper
- Several change gears
- Operating manual with electrical diagram
Space requirement (L x W x H): 2100 x 800 x 1600 mm
Weight: 750 kg
Good condition
Mali oglas
Nemčija
614 km
Sredinski stružnica in stružnica za vreteno
WMW MikromatDZFG 200x500
Pokliči
Stanje: rabljeno, Leto izdelave: 1986, Technical details:
Swing diameter over bed: 315 mm
Swing diameter over cross slide: 200 mm
Turning length: 500 mm
Swing diameter over bed: 315 mm
Maximum swing diameter over face slide: 200 mm
Centre height measured in bed: 180 mm
Spindle bore: Ø 32 mm
Speed range: 56...2,800 rpm / only 6-step left-right
Feed range X-axis: longitudinal: 0.02–0.8 m/min
Feed range Y-axis: cross: 0.01–0.4 m/min
Tailstock quill taper: MT 4
Tailstock quill travel: 140 mm
Total power requirement: 5.5 kW
Machine weight approx.: 2.0 t
Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m
- Workpiece clamping via collet chuck
- Travel distances: longitudinal slide = 580 mm, cross slide = 170 mm
- incl. tool rest
- incl. change gears
- Steady rest Ø 100 mm
- Four-way toolpost
The machine is operating with restricted function!
Iajdpju Ix Hqefx Adkep
6 spindle speeds are currently selectable! (224/1800; 280/2240; 355/2800 rpm)
Sale as described.
Olajšamo vam iskanje
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni stružnica z vodilno/pogonsko vreteno, premer struženja nad posteljo 300–399 mm (189)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:
- Ali Stružnica
- Cam Stružnica
- Chuck Na Stružnici
- Cnc Stružnica Za Les
- Da Stroj
- L + Z Stružnica
- Lesa Stružnici Z Orodja In Pribor
- Mech Ploščo Strižne
- Mini Stružnica

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec









































































































































































































































