Stružnica z vodilno/pogonsko vreteno, stružni premer nad ležiščem 0–299 mm nakup rabljenega (116)

Stanje: novo, Turning & Milling Combination WMP290V-F with frequency inverter LATHE Centre distance ----- 700 mm Iiedpfopz I Iqox Ah Doh Centre height ----- 140 mm Swing over bed ----- 280 mm Swing over cross slide ----- 165 mm Spindle bore ----- 38 mm Spindle mounting ----- MT5 Lathe spindle speed ----- 70-1800 continuously variable rpm Tailstock ----- MT3 Motor power ----- 1.5 kW Weight ----- 230 KG MILLING UNIT Milling head outreach ----- 185 mm Milling machine speed ----- 50-2250 continuously variable rpm Milling spindle taper ----- MT2 Milling head swivelling ----- +/- 90° Milling spindle quill travel ----- 50 mm Motor power ----- 750W Weight ----- 75 KG

Stanje: dober (rabljeno), Razdalja med konicama: 450 mm Višina konic: 120 mm Vreteno izvrtina: 23 mm Število vrtljajev: 40 – 3000 min⁻¹ Brezstopenjski pogon s 3 predstopnjami in digitalnim prikazovalnikom števila vrtljajev Nasadni konjiček: MK 2 Pogon: 1,5 kW Teža: 350 kg Dimenzije: 1200 x 650 x 1330 mm Barva: Resedino zelena RAL 6011. Digitalni prikazovalnik: Po želji ob doplačilu Ijdew I A Uxopfx Ah Djih Dodatna oprema: Dodatna oprema na zahtevo

Stanje: rabljeno, številka stroja/vozila: 1717, used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 piece 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 holders Iisdpfx Ahouqb Eme Deh Lever-operated collet chuck system with 15 collets. The machine is located at our site in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Leto izdelave: 1977, Stanje: rabljeno, Weiler Matador lathe, year of manufacture approx. 1977, three-jaw chuck, Multifix quick-change toolpost. The machine is in operational condition and can be demonstrated under power by prior arrangement. Iiedonkad Sspfx Ah Doh

Stanje: rabljeno, Leto izdelave: 1982, Swing diameter over bed: 297 mm Swing diameter over cross slide: 160 mm Turning length: 500 mm Distance between centers: 500 mm Spindle speed: 15 – 3550 rpm Spindle nose size: 5 (DIN 55022) Spindle bore: 36 mm Tailstock quill taper: MT 3 Isdpfx Asvxwlpjh Djih Tailstock quill travel: 90 mm Tailstock offset: 500 mm Motor speed: 1440 / 2830 rpm Motor power: 3 / 2.2 kW Weight: 0.8 t Space requirements (approx.): 1.40 x 0.70 x 1.20 m Chuck guard with electrical interlock Tool cabinet with various contents

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 205754, Schaublin 135 precision lathe in good condition, original paintwork, equipped with Mitutoyo 2-axis digital readout and accessories. Machine no. 205754 * Centre height: 135 mm * Centre distance: 630 mm * Maximum workpiece diameter over bed: 315 mm * Maximum workpiece diameter over cross slide: 150 mm * Maximum workpiece diameter in the gap: 355 mm * Spindle speeds, infinitely variable: 14 – 3000 rpm with reduction gearbox * Spindle nose: Camlock D1 – 4" * Spindle taper: Morse 5 * Spindle bore: Ø 40 mm * Reducing sleeve for collet B 32 Thread-cutting and feed gearbox: * 48 metric threads: 0.25 to 14 mm * 48 imperial threads: 72 to 1 TPI * 48 module threads: Module 0.125 to 7 * 24 fine feeds, longitudinal and cross: 0.015 to 0.21 mm * 24 longitudinal and cross feeds: 0.025 to 0.35 mm * Larger feeds available via threading gears Cross slide: * Carriage travel along bed: 620 mm * Tool slide travel: 100 mm * Cross slide travel: 180 mm * Centre height above tool slide: 26 mm * Tool cross-section: 16 x 16 mm Tailstock: * Quill taper: Morse 3 * Quill travel: 120 mm * Lateral adjustment: 10 mm Motor: * Speed: 750 – 3000 rpm * Power: 2 / 4 HP Weight and footprint: * Approx. 1300 kg * Dimensions (L x D x H): 1715 x 970 x 1280 mm Accessories in the cabinet: * Mitutoyo 2-axis digital readout * Change gears * 2 pieces 3-jaw chucks * MULTIFIX tool post with 2 tool holders * Additional Drehblitz quick-change tool post with 4 tool holders * Face plate * New drill chuck * New live center * Storage box with various chisels and tools Iisdpfx Ahsmidlks Djh * Coolant system * Machine manual (German) About the machine: Offered is a Schaublin 135 lathe in technically very good condition. The machine is fully functional and comes with accessories. All guides are in very good condition, and the machine’s geometry is good. All slides run smoothly and evenly. The machine has been mechanically and electrically tested, and an oil change will be performed. The machine runs very quietly, even at high speeds. Take the opportunity to inspect the machine under power on site and see the excellent condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself. Iedpfx Ahovivmye Doih

Stanje: novo, Centre length ----- 550 mm Centre height ----- 125 mm Swing diameter ----- 250 mm Spindle bore ----- 26 mm Bed width ----- 135 mm Spindle speed ----- variable 30–2200 rpm Spindle motor power ----- 1.1 kW INCLUDES * Delta frequency inverter * Automatic longitudinal and cross feed * Thread cutting dial * 3-jaw chuck 125 mm * 4-jaw chuck 125 mm * Faceplate * Fixed steady rest * Travelling steady rest * Backing plate * Rear splash guard * Toolbox with various tools Option Iiodpfx Ahsq E Tm Uj Doh * Stand/cabinet

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Tour parallèle L & Z (d’occasion) Fabricant : Boley Modèle : 6 LZ AUT Année de fabrication : 1992 Hauteur de pointe : 140 mm Distance entre pointes : 500 mm Diamètre de tournage au-dessus du banc : 270 mm Diamètre de tournage au-dessus du chariot : 160 mm Alésage de broche : 32 mm Plage de vitesses de broche : 28 – 3550 tr/min Cône de la contre-pointe : CM 3 Course du fourreau : 80 mm Puissance moteur (moteur broche) : 1,4/2,2 kW Poids de la machine : env. 1 050 kg Encombrement : env. L 1 600 mm x l 1 000 mm x H 1 450 mm Porte-outil à changement rapide système Multifix taille E, avec insert Bac à copeaux Cloison à copeaux arrière Protection mandrin Isdpfx Aew N Rp Toh Djih Éclairage machine Pinces de serrage incluses, voir photos Visualisation numérique 3 axes Heidenhain Système d’arrosage La machine est en excellent état, opérationnelle immédiatement. Chariot élévateur disponible pour chargement gratuit sur camion Expédition à prix avantageux possible Localisation de la machine : 59510 Lippetal

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Parallelni stružni stroj WABECO D6000E Medosna razdalja: 600 mm Maks. Ø nad posteljo: 270 mm Maks. Ø nad suportom: 170 mm Hitrost vretena: od 45 do 2300 vrt/min Revolverska glava Multifix tip A Soosni 3-čeljustni vpenjalni tulec Ø 100 mm (NOV) Leto izdelave: 1998 (stroj zelo malo rabljen) Iodow Ecxaopfx Ah Doih Regulacija hitrosti vretena s pomočjo variatorja Konjiček CM2 Digitalni odčitek položaja – 2 osi, EAE tip Mikronel 220 L Priložen vezni vijak za vpenjalo Dodatna oprema: 5 nosilcev orodij + različna navojna kolesca Napetost: 220 V enofazno Dimenzije (D x Š x V): 1500 x 900 x 1700 mm Teža: cca 200 kg

Stanje: rabljeno, Leto izdelave: 1987, Lead and Feed Screw Lathe Manufacturer: Boehringer Model: DUE 560 Year of manufacture: 1987 Used Technical specifications: Turning diameter: 250 mm Turning length approx.: 1200 mm Swing over bed: 560 mm Swing over cross slide: 365 mm Max. workpiece between centers: 500-800 kg Spindle diameter in front bearing: 100 mm Spindle bore: 62 mm Spindle nose: DIN 55022 No. 8 Travels Cross slide travel: 345 mm Top slide travel: 125 mm Tailstock/quill diameter: 80 mm Tailstock taper: MT 5 Quill stroke: 190 mm Longitudinal feed: 60x0.0315-28 mm/rev Cross feeds: 60 x 0.016-14 mm/rev Thread pitch capability: 0.125-112 mm Ijdpfx Aotud S Ujh Dsih Total connected load: 20 kW Space requirement approx. 3.5 x 2.0 x 2.2 m Weight: approx. 2.5 t

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Parallel Lathe Dashin Champion 1000 x 190 Iedpswx Ntqjfx Ah Deih Model: Cp 1000 Bar Passage: 54 mm Digital Readout Used Machine Internal Code: SVR 346

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe in Very Good Original Condition!!! Technical Specifications: >> Year of manufacture: approx. 1992, Machine No. 4549 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps Iedswkh Abjpfx Ah Deih >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock taper: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Capable of cutting metric, inch, module, and diametral pitch threads >> Metric thread pitch from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Features: >> New collet chuck system, new collets from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders About the Machine: For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The bed ways are in excellent condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and enables ground-finish surfaces to be produced. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: novo, Centre length ----- 750 mm Centre height ----- 125 mm Swing diameter ----- 250 mm Spindle bore ----- 26 mm Bed width ----- 135 mm Spindle speed ----- variable 30-2200 rpm Motor power ----- 1.1 kW INCLUDES Isdoq E I Avopfx Ah Deih * Delta frequency converter * Automatic longitudinal and cross feed * Thread chasing dial * 3-jaw chuck 125 mm * 4-jaw chuck 125 mm * Faceplate * Fixed steady rest * Travelling steady rest * Riser plate * Rear panel * Box with various tools Option * Base cabinet

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Capstan stružnica Ward 2DB z zračnim vpenjalom Isdow Id Nkopfx Ah Dsih Različno orodje kot prikazano na sliki

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson ES8 Iodpfx Ahevkfhpj Djih From training workshop – In excellent condition! Technical Data: • Year of manufacture: approx. 1990, machine no. 3768 • Centre height: 120 mm • Centre distance: 430 mm • Spindle speed: 60 – 3000 rpm in 18 gear steps • Spindle bore: 23 mm • Camlock spindle nose, DIN 4 • Tailstock: Morse taper 2 • Feeds: 0.03 to 0.15 mm/rev • Thread cutting: Metric, Inch, Module, and Diametral Pitch • Metric thread pitches: 0.25 to 2.5 mm • Weight: approx. 360 kg • Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: • 3-axis digital readout by Easson ES8 • Collet chuck system from 1 to 20 mm, collets in 1 mm increments with chuck and draw tube • 1 three-jaw chuck with 2 sets of jaws • 1 four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Facing attachment About the machine: Offered is a Weiler Primus lead and feed screw lathe, year approx. 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed ways are in excellent condition. Even at high spindle speeds, the Weiler runs quietly. The machine comes from a large company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: novo, Centre distance ----- 750 mm Centre height ----- 125 mm Swing diameter ----- 250 mm Spindle bore ----- 26 mm Bed width ----- 135 mm Spindle speed ----- variable 30-2200 rpm Motor power ----- 1.1 kW INCLUDES * 2-axis SINO digital readout * Delta frequency converter * Automatic longitudinal and cross feed Iisdpfx Aoq E Ra Ijh Djh * Thread dial indicator * 3-jaw chuck 125 mm * 4-jaw chuck 125 mm * Faceplate * Fixed steady rest * Travelling steady rest * Base plate * Rear splash guard * Toolbox with various tools Option * Stand cabinet

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition !!! Technical Data: >> Machine No. 2801 >> Center Height: 120 mm >> Distance Between Centers: 430 mm >> Spindle Speed: 60 - 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock Morse Taper: MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 pc Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet system with collets from 2 mm to 12 mm in 1 mm increments, including drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Clamping tools About the Machine: Isdpfx Ahov Tyzcj Deih Offered is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriages move very smoothly and evenly. The Weiler runs quietly, even at high spindle speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect the machine under power on site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to it.) Digital readout available at additional cost.

Stanje: novo, Centre distance ----- 500 mm Centre height ----- 125 mm Swing over bed ----- 250 mm Swing over cross slide ----- 150 mm Spindle taper ----- MT4 Spindle bore ----- 26 mm Iijdjpz Iy Aopfx Ah Djh Bed width ----- 140 mm Spindle speed ----- 80-1600 rpm Tailstock taper ----- MT3 Motor ----- 750W Lathe equipped with automatic longitudinal and cross feed Including: cabinet base, 3-jaw chuck, 4-jaw chuck, faceplate, fixed steady rest, travelling steady rest, CE guard

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970, Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock Ijdpfxovv Etve Ah Deih >> Tailstock taper: MT 3 >> Feeds from 0.010 to 1.184 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set is incomplete) and mount >> 1 three-jaw chuck including a set of jaws >> 1 four-jaw chuck including a set of jaws >> Multifix size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power on-site to verify its condition for yourself.

Stanje: novo, WM180V - ROGI variable speed metal lathe 230V-1Ph Swing over bed ----- 180 mm Swing over cross slide ----- 110 mm Centre height ----- 90 mm Distance between centres ----- 300 mm Bed width ----- 100 mm Isdpfx Ahoga T Ebe Doih Cross slide travel ----- 75 mm Compound slide travel ----- 55 mm Spindle bore ----- 21 mm Spindle taper ----- MT3 Spindle speed range ----- variable 50 - 2500 rpm Thread cutting Whitworth ----- 10 - 44 TPI (8) Thread cutting metric ----- 0.5 - 3 mm (10) Tailstock quill travel ----- 60 mm Tailstock quill diameter ----- 30 mm Tailstock taper ----- MT2 Motor power ----- brushless 600 Watt Weight ----- 60 kg STANDARD ACCESSORIES * 3-jaw chuck 100 mm - self-centering * 4-way tool post * Drip tray * Rear splash guard * Chuck guard * Leadscrew guard * Tool slide guard * Set of change gears * Digital speed readout * Fixed centres * Forward / Reverse switch * Tools in box OPTIONS * Independent 4-jaw chuck 100 mm * Flange for 4-jaw chuck 100 mm * Fixed steady rest * Follow rest * Face plate 170 mm * Stand * TOOA0 quick change tool post * Turning tool set

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds: 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: length 1.2 m, height 1.3 m, depth 0.65 m Iiedpfx Aou Aftgoh Doh Accessories and Equipment: >> 1 pcs. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pcs. new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This new generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: novo, WM210V - ROGI VARIO METAL LATHE 230V-1Ph Swing over bed: ----- 210 mm Swing over cross slide: ----- 110 mm Centre height: ----- 105 mm Distance between centres: ----- 400 mm Bed width: ----- 100 mm Cross slide travel: ----- 75 mm Compound slide travel: ----- 55 mm Spindle bore: ----- 21 mm Spindle mount: ----- MT3 Spindle speed range: ----- variable 50 - 2500 rpm Thread cutting imperial: ----- 10 - 44 TPI (8) Thread cutting metric: ----- 0.5 - 3 mm (10) Quill travel: ----- 60 mm Quill diameter: ----- 30 mm Quill taper: ----- MT2 Motor power: ----- brushless 600 Watt Weight: ----- 75 kg STANDARD ACCESSORIES * 3-jaw 100 mm chuck - self-centering * 4-way tool post * Chip tray * Rear splash guard Iiodpsga Txcofx Ah Doh * Chuck guard * Leadscrew cover * Tool post guard * Change gear set * Digital speed display * Fixed centres * Forward / Reverse switch * Toolkit in case OPTIONS * 4-jaw 100 mm chuck - independent * Flange for 4-jaw 100 mm chuck * Fixed steady rest WM210V * Travelling steady rest WM210V * Faceplate WM210V * Stand/cabinet WM210V

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 Iodpfxjvtp Edj Ah Dsih - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders - Stop - Electronic spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe with 2-Axis Heidenhain Digital Readout from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MK 2 >> Feeds: 0.03 to 0.15 mm/rev >> Possible threads: Metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: Iodpfx Ahju Afqls Djih >> 2-axis digital readout from Heidenhain >> 1 new 125 mm 3-jaw chuck with 2 sets of jaws >> New collet chuck system with brand new collets, range from 3 mm up to 25 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Rear splash guard About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to view this machine on-site under power and see its condition for yourself.