Center lathe

Weiler Matador VS2

Stanje: pripravljen za uporabo (rabljen), Drežna dolžina 500 mm Drežani premer nad ležiščem 297 mm Drežani premer nad podporo 160 mm Vrtina vretena 36,0 mm Pritrditev DIN 55022 Gr. 5 Konica: 3 MK Hod konice 90,0 mm Število vrtljajev 30 - 3550 min⁻¹ Število vrtljajev motorja: 1410 / 2830 min⁻¹ Skupna potrebna moč 3,3 kW Napetost 380 V Teža stroja cca. 620 kg Dimenzije D-Š-V 1420 x 700 x 1200 mm Iz šole za poklice – zelo dobro stanje (!!) Posebej primeren za srednje natančne obdelovance Oprema: - robusten stružni stroj z vodilnim in pogonskim vretenom - RÖHM trikrako vpenjalno glavo Ø 160 mm - preklopni zaščitni pokrov za vpenjalno glavo - ključ za vpenjalno glavo - MULTIFIX nosilec rezila A s 3 novimi vložki - pomičen konjiček - vrtljiva strojna svetilka Dksdpsxq Hhyofx Afwjw - upravljalna plošča spredaj levo - avtomatski pomiki za čelni in zgornji suport - strojno podnožje z omaro (prostor za shranjevanje) - zaščitna zadnja stena proti ostružkom - gumb za nujni izklop - navodila za uporabo

Stanje: rabljeno, x-travel 800 mm y-travel 400 mm z-travel 300 mm Heidenhain digital readout Clamping table size 1000 x 520 mm Dedpsqpl Uuefx Afwekw Spindle speed range 40 – 2000 rpm Spindle taper SK 40 Total power requirement 2.2 kW Machine weight approx. 2.2 t Space requirements approx. 1700 x 1600 x 1800 mm Deckel FP 2 B – slant-bed, travelling column design Universal swivel-tilt table Including various SK40 tool holders, draw thread S20x2 Collet chuck The machine was overhauled for approx. €24,000.00

Stanje: pripravljen za uporabo (rabljen), WEILER Matador VS 2, vključno z novo digitalno prikazovalno ploščo s tremi osmi. Oprema iz šolske delavnice. - Največja višina vretena: 140 mm - Največja razdalja med vreteni: 500 mm - Območje vrtljajev vretena: 15 - 3550 vrt/min - Samodejni vzdolžni in prečni pomiki - Navoji / metrični / palčni itd. - Nova digitalna prikazovalna plošča s tremi osmi - Električni zaščitni pokrov vretena - Delovna luč - Osnovni nosilec Multifix z vložki - Sistem za hlajenje Dkjdpfezr Rnyox Afwow - Tričeljustna glava / stožčasta glava - Podpora vretena MK 3 - Različno orodje - Dokumentacija Dimenzije: D x Š x V 1,5 x 0,6 x 1,5 metra / Teža: 680 kg Pridržana pravica do sprememb in napak.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from Heidenhain ND 780, from a training workshop!! Dkodpey T Hqcofx Afwew Technical specifications: - Machine No.: 7702, Year of manufacture: approx. 1990 - Centre height: 140 mm - Centre distance: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock: Morse taper 3 - Feed rates: 0.012 to 0.9 mm/rev - Thread types: Metric, Inch, Module, and Diametral Pitch - Metric pitch range: 0.25 to 12 mm - Brake motor - Weight: approx. 700 kg - Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and equipment: - 3-axis digital readout Heidenhain ND 780 - Quick-clamping system for internal and external collets (see photo) - 1 piece three-jaw chuck, 3 sets of jaws - Multifix size A with 3 tool holders - Spindle guard - 1 piece bed stop - Change gears - Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. Naturally, the machine is fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of this Weiler was a training workshop. The machine comes equipped with comprehensive accessories. Take the opportunity to inspect the machine under power on site and see its very good condition for yourself.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1987, Univerzalni orodjarski rezkalni stroj Znamka: DECKEL Model: FP 2 Aktiv Leto izdelave: 1987 - obnovljen, na novo prebarvan z novo elektroinštalacijo stroja RAL7035 svetlo siva / RAL7012 bazaltno siva RAL5008 sivo-modra Št. stroja: 2202-11579 Tip rezkalne glave: 2271 Številka rezkalne glave: 300-3606 z garancijo geometrijski prevzem s preizkusnim protokolom Dodatna oprema: - 3-osni aktivni digitalni prikaz HEIDENHAIN TNC 113 - Fiksna miza 660 x 380 mm (T-utor: 12 mm) - Vertikalna rezkalna glava SK 40 z vlečnim navojem S 20 x 2 - Centralno mazanje, ročno upravljano - Hladilna naprava - Navodila za uporabo Dkjdpox A Eddsfx Afwsw - rabljeno, kot je vidno -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by Elesta from Training Workshop!! Technical Data: >> Machine No. 88-8115, Year of manufacture: 1988 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: Dkjdpsy Tmkvsfx Afwow >> 3-axis digital readout by Elesta >> Quick-clamping device for internal and external collets (see photo) >> 1 pc. 3-jaw chuck, 1 set of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc. bed stop >> Change gears >> Travelling steady >> Machine feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler runs smoothly even at high speeds. The original location was a training workshop. The lathe is equipped with extensive accessories. You are welcome to inspect and test the machine under power on site to convince yourself of its excellent condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C NEW in Special Light Grey Paint! Technical Data: >> Machine No.: 92-028, Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: MT 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of count switching, >> 1 pc. 3-jaw chuck, 1 set of jaws >> 1 pc. 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders Dkodpfx Asyyb T Sjfwsw >> Motor brake >> Bed stop About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is of course fully functional and has been newly painted in light grey. A very fine machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and fitted with cover strips to protect them from dirt. All slides move smoothly and evenly. Take the opportunity to view the machine under power on site and convince yourself of its condition.

Stanje: rabljeno, Friedrich Deckel FP 2 LB, univerzalni stroj za obdelavo z orodjem Dodatna oprema ni vključena v obseg dobave, vendar jo je mogoče kupiti na drugi dražbi, ki je dostopna na tej povezavi. Serija orodij za obdelavo Univerzalni stroj za obdelavo Deckel FP 2 LB se odlikuje izjemno stabilno osnovo in je zasnovan kot samostojen stroj. To pomeni, da stroj ohranja svojo natančnost tudi pri obdelavi težkih obdelovancev, ki tehtajo do 1000 kg. Dodatna značilnost je 45-stopinjska nagnjena podlaga. Po odstranitvi univerzalne mize ta zasnova omogoča neposredno vpenjanje in obdelavo blokov motorjev v obliki črke V z 90-stopinjskim kotom valjev, kot so ameriški motorji V8. Polega tega je dolg hod (800 mm) v tej aplikaciji prednost. Tehnični podatki: Deckel, univerzalni stroj za obdelavo FP 2 LB Digitalni prikazovalnik: 3-osni digitalni prikazovalnik Heidenhain Hod osi X: 800 mm Hod osi Y: 300 mm Hod osi Z: 400 mm Nosilec orodja: navoj za vpenjanje SK 40, S 20 x 2 Tip obdelovalne glave: vertikalna obdelovalna glava Območje hitrosti: 40–2000 vrt/min Število stopenj: 18 Tip mize: univerzalna vrtljiva/nagibna miza (± 45° / ± 15°) Površina za vpenjanje mize: 1000 x 520 mm Velikost T-reže: 16 mm Primež 160 mm Priključna moč: 9,5 kVA Teža: pribl. 1900 kg Dimenzije: pribl. 1570 x 1675 x 1850 Dedpfx Aogyw S Tefwjkw V naši trgovini lahko najdete več novih in rabljenih izdelkov! Mednarodni stroški pošiljanja na zahtevo!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Leadscrew and Feedshaft Lathe with New K&C 3-Axis Digital Readout, Special Light Grey Finish!!! Technical Data: >> Machine No. 92-027, Year of manufacture 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Speed range: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock Dsdpfx Aoyylq Uefwjkw >> Tailstock Morse taper MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Threads possible: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> New 3-axis K&C digital readout, 12-month manufacturer's warranty, supplied with operating manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction toggle >> 1 x 3-jaw chuck, 1 set of jaws >> 1 x 4-jaw chuck, 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The lathe is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis K&C digital readout has been retrofitted. All scales are brand new and equipped with protective covers against dirt. All slides move smoothly and evenly. Take the opportunity to view and test the machine under power on site to verify its condition for yourself.

Stanje: dober (rabljeno), Leto izdelave: 1962, Spindle mount, vertical + horizontal SK / ISO 40 Table clamping surface 700 x 285 mm Travel X-axis 500 mm Djdpfxjm Uygvs Afwskw Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed rates 8 - 400 mm/min Rapid traverse 1200 mm/min Drive power 2.2 kW Dimensions (L x W x H) 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / Special features: • Vertical milling head, swiveling R/L • Fixed angle clamping table • Feed + rapid traverse on all axes Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel