Balirne stiskalnice nakup rabljenega (204)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, obratovalne ure: 23.000 h, številka stroja/vozila: 00834, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.315 mm, širina bale: 1.100 mm, višina bale: 720 mm, trajanje garancije: 3 meseci, moč: 30 kW (40,79 KM), leto zadnje generalne obnove: 2025, Oprema: dokumentacija / priročnik, Bollegraaf Recycling Solutions, de oorspronkelijke fabrikant van deze Bollegraaf-pers, biedt hierbij de volgende machine(s) aan: Een gereviseerde HBC60 (30 kW) Gereviseerd – in zeer goede technische staat Bouwjaar: 2008 Volumecapaciteit m³/u max.: 365 334 321 301 Volumegewicht kg/m³ max.: 15 30 50 80 Gewichtscapaciteit t/u max.: 5,5 10 16 24 Baalgewicht: 400 – 800 kg, afhankelijk van de soortelijke massa van het materiaal en baallengte Baallengte: - instelbaar Baalhoogte: - 720 mm Baalbreedte: - 1.100 mm Vulopening: - 1.100 mm x 1.320 mm Max. aanvoermateriaal: - 1.500 mm x 1.200 mm Persdruk hoofdram: - max. 60 ton Persdruk voorpersklep: - max. 25 ton Cycletijd: - 18 seconden Hoofdmotor: - 45 kW Kdjdpfx Aexck U Uef Teg Motor Twistomat: - 2,2 kW Motor tegenstroompomp: - 1,1 kW De volgende revisiewerkzaamheden zijn uitgevoerd in onze officiële Bollegraaf OEM Refurbishment Workshop: * Veiligheidsdeuren naaldinrichting vervangen door nieuwe * Achterwielen ram vervangen door nieuwe * Bronsstrip boven ram vervangen door nieuw * Positieschakelaar beweegbare balk ram vervangen door nieuwe * Schraper boven ram vervangen door nieuw * Dichting voorperscilinders vervangen door nieuwe * Nieuwe stalen draagbalken kanaalcilinder * Nieuwe buisjes opgelast en wielen gangbaar gemaakt * Nieuwe duwcilinder onder verticale bindunit * Veiligheidsluik achter naaldinrichting vervangen door nieuw * Diverse kabels en ASi-modules vervangen door nieuwe * Nieuw luchtfilter * Nieuwe oliefilters

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W230-028, stiskalna sila: 80 t, trajanje garancije: 24 meseci, pritisk: 250 letvica, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. It concerns a HBC80 baler (45kW) equipped with vertical tying. This baler has already been completely refurbished in our overhaul workshop. The refurbishment was carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold including a 2-year warranty. The press is supplied with the following options: * support stands, * intermediate hopper, Kodpfx Afetvat To Tedg * bale exit chute, * wire spool platforms

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HBC 140 2x75kW 2001 (210-008-01), stiskalna sila: 155 t, teža bale: 1.500 kg, pritisk: 250 letvica, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-ratten bekabeling Draaiuren: 0 na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards', inclusief 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de feitelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en opnieuw gelast waar nodig. Dit geldt ten minste voor de volgende onderdelen: • Persplunjer, • Frame, • Perskanaal, • Voorpersklep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Kdsdpfx Afstvau Aj Tsg Opnieuw gespoten Na het meten van de toleranties en alle benodigde reparatie- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en -slangen worden vervangen. De hydraulische componenten worden opnieuw verpakt. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke plekken. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen door nieuwe. Cilinders: De cilinders worden opnieuw verpakt en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en schoongemaakt. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (mens-machine-interface) worden vervangen door de nieuwste Schneider M340-versie, inclusief de meest recente software.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2020, stiskalna sila: 50 t, širina odprtine za polnjenje: 670 mm, dolžina polnilne odprtine: 1.200 mm, dolžina bale: 1.200 mm, teža bale: 450 kg, skupna širina: 800 mm, skupna višina: 800 mm, moč: 7,5 kW (10,20 KM), lastna masa: 2.180 kg, vhodna frekvenca: 50 Hz, Tested and ready for operation, Vertical baler Dixi 50S PET Year of manufacture: 2020 Bale dimensions: L x W x H (mm): 1200 x 800 x 800 - 1100 Bale weight (kg): approx. 350-500 kg Specifications: L x W x H (mm): 1600 x 1300 x 3100 Loading aperture (mm): 1200 x 670 Pressing force: 50 tonnes Power supply: 400 Volt Baler immediately operational Kodpfx Ajwviz Nof Tsdg Net price plus VAT. Delivery available at extra cost.

Stanje: delavnici obnovljeno (rabljeno), Horizontal baler DIXI 60 SLD Year of manufacture: 2014–2016 Semi-automatic 60-ton press system for efficient volume reduction of residual materials (recyclables) in industrial and commercial sectors: - Cardboard - Tetra Pak/cartons - Films - PET bottles - Foam materials - Insulation panels - and other compressible materials. Machine dimensions (L x H x W) approx. mm: 4150 (5080) x 1725 x 2035 Feed opening (W x H, standard) mm: 990 x 1110 Machine weight approx. kg: 5,420 Pressing force max. kN: 60 t / 600 kN Press cycle (average) approx. s: 47 Bale size (W x H x L) approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370–410 Tying: manual Number of ties: 3, secured with wire and quick-release loops Drive power: 7.5 kW; 400V/32A Kjdpfx Afjnfux Us Tjdg The presses have been tested and are fully functional, supplied with fresh UVV inspection and DGUV Regulation 3 test certificate. The Dixi 60 SLD is immediately ready for use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: - Replacement of all hydraulic hoses - Hydraulic oil change - Inspection of the hydraulic unit - Inspection and, if necessary, replacement of hydraulic cylinders Net price plus VAT and possible transport.

Stanje: delavnici obnovljeno (rabljeno), moč: 11 kW (14,96 KM), obratovalna teža: 8.000 kg, Horizontal baling press DIXI 80 SLD Year of manufacture: 2018-2021 Semi-automatic 80-ton press system for economical volume reduction of residual materials (recyclables) in industrial and commercial applications: - Cardboard - Tetra Pak packaging - Foils - PET bottles - Foam material - Insulation panels - And other compressible materials Kdjdpfx Aoqa Dq Dsf Teg Machine dimensions (L x H x W) approx. mm: 4,320 x 1,830 x 2,154 Feed opening (W x H, standard) mm: 1,040 x 1,110 Machine weight approx. kg: 8,000 Max. pressing force: 80 t / 800 kN Cycle time (average) approx. s: 35 Bale size (W x H x L) approx. mm: 1,120 x 1,120 x 1,200 Bale weight (depending on material) approx. kg: 550 - 650 Tying: manual Number of ties: 4, using wire with Quicklink wire system Drive power: 11 kW; 400V/32A The presses are tested and fully operational, supplied with a current UVV inspection and certified according to DGUV Regulation 3. The Dixi 80 SLD is immediately ready for operation. Upon request and for an additional charge, the Dixi 80 SLD can be completely overhauled. This includes: - Replacing all hydraulic hoses - Changing hydraulic oil - Inspecting the hydraulic unit - Checking and, if necessary, replacing the hydraulic cylinders Net price plus VAT; transport available on request. Operating manual is available and supplied as both PDF and printed copy.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 24.967 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 004283-0030, stiskalna sila: 122 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, trajanje garancije: 24 meseci, leto zadnje generalne obnove: 2026, Oprema: dokumentacija / priročnik, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. The unit concerns a Bollegraaf HBC120s baler (90kW), equipped with cross tying (5 vertical and 5 horizontal wires). At the time of writing, this baler is undergoing a complete overhaul at our refurbishment workshop. This refurbishment is carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, the baler is sold including a 2-year warranty. Technical specifications, type HBC120S: Volume capacity m³/h max. – 815 660 500 Bulk density kg/m³ max. – 20 50 100 Weight capacity t/h max. – 16.3 33 50 The aforementioned capacities apply only if the machine is used properly and is fed continuously with suitable material for at least one uninterrupted hour. Bale weight – approx. 1,470 kg, depending on material type and bale length Bale length – variable / adjustable Bale height – 1,100 mm Bale width – 1,100 mm Hopper dimensions – 1,100 mm x 1,600 mm – These dimensions also determine the maximum size of material that can be loaded into the machine. Press force – max. 119.7 tons Pre-press flap force – max. 65 tons Cycle time, excluding wire tying – 19 seconds Main motor output – 90 kW (120 HP) Twistomat (knotter) motor – 1.5 kW (SEW) Counter pressure pump motor – 1.1 kW (2 HP) Needle installation motor – 7.5 kW (SEW) Oil cooler fan – 3 kW (4 HP) Oil cooling pump – 4 kW (5.5 HP) Operating pressure – 315 bar Machine weight – approx. 40,040 kg Number of wires – 5 vertical; 5 horizontal Oil volume – 1,655 liters Oil type – BP-SHF-46 Colour – baler in RAL 6024 (green); safety doors in RAL 1021 (cadmium yellow) Kdjdpfxoxcir Eo Af Tog Baler dimensions – length 11,765 mm; width 2,500 mm; height 7,104 mm.

Leto izdelave: 2008, Stanje: dober (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 34.480 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, skupna masa: 19.000 kg, transportna višina: 3.300 mm, kapaciteta rezervoarja za olje: 750 l, moč: 45 kW (61,18 KM), Technical Data – Baler: Manufacturer: Bollegraaf Model: HBK 100 Year of manufacture: 2004 Operating hours: 34,480 hours Main ram pressing force: 100 t Pre-pressing force max.: 42 t Feed hopper dimensions: 1,600 x 1,100 mm Filling volume: 3.15 m³ Theoretical cycle time: 22 seconds Theoretical throughput: up to 450 m³/hour Bale dimensions: 1,100 x 720 mm; length variable Kdodpfxoxbgnhj Af Tjg Drive power: 45 kW Total connected load: 60 kW Tying system: 5-fold vertical Throughput rates at bulk density: - 30 kg/m³: approx. 13 t/hour - 50 kg/m³: approx. 20 t/hour - 100 kg/m³: approx. 30 t/hour Throughput with air separator operation: approx. 20 t/hour Bale weight: 550 to 750 kg, depending on material Hydraulic oil tank volume: 750 L PLC control: Telemecanique TSX Micro Transport dimensions (excluding press): 10,900 x 2,320 x 3,300 mm (L x W x H) Machine weight (press): approx. 19 t Remarks: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but instead cuts the material between knives mounted on the pressing ram and a counter-knife in the frame. It is, therefore, a cutting-edge baler, comparable to models from Paal, unoTech, etc. The baler is in very good condition for its age, as it was used exclusively for baling paper from document destruction operations. The documentation (operating manual, CE certificate, electrical/hydraulic schematics) is complete. Inspection by appointment possible. We do not accept liability for the technical data provided or for possible errors.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 71 t, širina odprtine za polnjenje: 1.080 mm, dolžina polnilne odprtine: 1.620 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 600 kg, skupna širina: 3.450 mm, skupna višina: 4.090 mm, skupna dolžina: 10.020 mm, vhodna napetost: 400 V, skupna masa: 27.000 kg, raven hrupa: 85 dB, pritisk: 300 letvica, transportna višina: 2.300 mm, moč: 37 kW (50,31 KM), Vollautomatische Kanalballenpresse mit Vorpressklappe ab sofort verfügbar. Die Maschine wird inklusive Förderband mit Bodensektion geliefert. Die Ballenpresse wird in überholtem Zustand geliefert und das Förderband wurde Anfang dieses Jahres überholt. Die Maschine wurde Anfang Oktober aus der Produktion genommen und steht derzeit in unserer Halle. Die Maschine kann bei uns vor Ort in betriebsbereitem Zustand besichtigt werden. Diese Maschine ist besonders geeignet für das Pressen von Papier/Karton sowie verschiedenen Kunststoffarten wie PET, HDPE und Big Bags. Technische Daten Ballenpresse: Antrieb: 37 kW Presskraft: 71 Tonnen Ballenmaße: 1100 x 720 x 1300 mm (Länge einstellbar) Anzahl Drähte: 4 vertikal Kjdpfx Aoxl Rqbof Tedg Einfülltrichter Maße: 1620 x 1080 mm Ballengewicht: bis 600 kg (materialabhängig) Durchsatzleistung: bis 20 t/h (materialabhängig) Transportgewicht: 27.000 kg Technische Daten Förderband: Länge des Horizontalteils: 3.000 mm Länge des Steigteils: 7.424 mm Winkel: 29° Befüllmöglichkeit: auf Bodenhöhe

Stanje: rabljeno, Leto izdelave: 2007, moč: 7 kW (9,52 KM), NA PRODAJO / ZA NAJEM: VERTIKALNA BALIRKA! (Najem na voljo v Litvi, Latviji, Estoniji in na Poljskem) Tehnične informacije: Proizvajalec: HSM Model: HSM 500 VL Pritisk: 54–540 kN Velikost bale: 1200 x 800 x 1200 mm Teža bale: cca 500 kg Maks. velikost bale: cca 1200 x 800 x 1200 mm (Š x G x V) Dimenzije preše: 1200 x 800 x 1520 mm (Š x G x V) Motor: 7,5 kW Leto izdelave: 2005 Kodpfjxuqkmex Af Todg CENA PO POVPRAŠEVANJU!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 113889, stiskalna sila: 60 t, širina odprtine za polnjenje: 550 mm, dolžina polnilne odprtine: 1.160 mm, dolžina bale: 1.200 mm, širina bale: 800 mm, višina bale: 1.100 mm, teža bale: 420 kg, skupna širina: 1.400 mm, skupna višina: 2.170 mm, skupna dolžina: 1.890 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, skupna masa: 2.430 kg, moč: 7,5 kW (10,20 KM), leto zadnje generalne obnove: 2025, Brand: Dixi The stated price is exclusive of VAT, ex works, and without packaging. The press has been cleaned and function tested. Technical details: Manufacturer: Dixi Model: 60S Bale size (LxWxH): 1200 x 800 x 1100 mm Bale weight: 340–500 kg External dimensions (LxWxH): 1890 x 1400 x 2170 mm Kdjdpfswnpx Eox Af Tsg Feed opening: 1160 x 550 mm Pressing force: 600 kN Throughput capacity: 1–2 bales/hour Number of wire channels: 4 Machine weight: 2,430 kg Power supply: 400 V / 50 Hz Power consumption: 7.5 kW Installation location: indoors / covered outdoor area Serial number: 113889 Year of manufacture: 2012 Please refer to the respective original documentation, which can be obtained directly from the manufacturer.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, obratovalne ure: 28.748 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 570 kg, skupna masa: 20.000 kg, kapaciteta rezervoarja za olje: 600 l, moč: 37 kW (50,31 KM), volumenski pretok: 350 m³/h, Technical Data for Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of manufacture: 2015 Kdjdpfxovn Tg Ij Af Teg Total operating hours: 30,143 hours (as of July 2025) Effective pump runtime: 6,527 hours (as of July 2025) Number of bales pressed: 115,193 (as of July 2025) Pre-press force: 25 t Main press force: 60 t Specific pressing force: 73 N/cm² Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Theoretical throughput: 800 m³/h Throughput under operating conditions: 350 m³/h Bale dimensions: 1,100 x 750 mm Drive power: 37 kW Binding: 5-fold vertical, fully automatic Throughput at bulk density of 50 kg/m³: 11 to 14 t/h Bale weights: 420 to 570 kg (material dependent) Hydraulic oil tank volume: 600 L Baler dimensions (assembled with hopper): 10,100 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine weight (baler): approx. 20 t Condition of the baler: The baler was partially overhauled in our workshop and subsequently tested in both manual and automatic modes. The following maintenance work was performed: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully emptied and cleaned - Oil and air filters replaced; new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers of the press ram removed and replaced - Grease cartridges of the automatic roller lubrication system replaced - Slide rails at the press floor in the pressing chamber cut out - Undercarriage reinforced with welded plates - New HARDOX slide rails welded in - Wire station with guide pulleys for lower wire cleaned and made operational - Slide rails on press channel floor cut out - New HARDOX slide rails welded in - Both side walls of the press channel removed and derusted - Worn side wall plates cut out - Complete side walls fitted with new wear plates and welded - Main hydraulic cylinder disassembled and inspected - Piston rod replaced, cylinder barrel honed - Complete seal kit renewed; pressure test performed - Vertical needle system for binding disassembled, cleaned, wire guide pulleys serviced - Chain cleaned and lubricated; chain tension reset - Drillomat cleaned; wire cutter, drill shafts and twisting fingers checked, retightened to specified torque and serviced - Machine inspected, general maintenance performed, and press tested in both manual and automatic modes Notes: The baler is sold without conveyor belt and without wire stations. Inspection by arrangement possible. We assume no liability for technical data or any errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 30.408 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 550 kg, skupna masa: 16.000 kg, kapaciteta rezervoarja za olje: 600 l, leto zadnje generalne obnove: 2024, Technical Specifications of the Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 (as of April) Main press force: 50 t Specific press force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under working conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Kdodpfsu Thhrjx Af Tog Throughput rates at bulk density of: 30 kg/m³: 6 to 7 t/hour 50 kg/m³: 7 to 9 t/hour 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspaper): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis Effective transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the baler: The machine has been partially overhauled in our workshop and general maintenance work has been carried out. After completion of the overhaul, the baler was tested during operation and is available for sale at short notice. The following overhaul work was performed: General: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel guideways welded and smoothed Hydraulic unit: - Hydraulic oil tank drained, tank cleaned, new oil filled - Oil filter and air filter replaced - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - Menu language set to English in the program - Two key switches on the control panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Limit switch for the flap replaced - Electrics of the wirbulator renewed, connected, and tested Press ram: - All four guide rollers of the press ram removed and replaced - Main hydraulic cylinder dismantled, disassembled, and partially overhauled; cylinder barrel honed, complete seal set replaced, leak test carried out - All plastic wear pads on the press ram replaced Pre-press flap: - Both bearings on pre-press shaft replaced - Both hydraulic cylinders dismantled, disassembled, and partially overhauled; both cylinder barrels honed, complete seal sets replaced, leak test carried out - Scraper flap on pre-press replaced Tying unit: - Two complete needles with wire guide rollers replaced - Needles adjusted and set - All wire guide rollers in the needle heads replaced - Twister fingers replaced - Two twister shafts replaced - All 8 wear plates on the twist mechanism under the twister fingers replaced Scope of delivery: Only the baler is being sold. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. Inspection by appointment. We assume no liability for the technical details or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Kdjdpfx Aovwlqqof Tog Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Leto izdelave: 2008, obratovalne ure: 40.000 h, Stanje: dober (rabljeno), številka stroja/vozila: HBC 140 2x75kW 2008 (00191), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Kdsdpfx Aokcgf Hjf Teg Bollegraaf HBC140s Balenpers (2x75kW). Balenpers: Gewicht: 47.100 kg Bouwjaar: 2008 Hardox bodemplaat alleen Variabele kanaaldrukregeling Kunststof ventiel Hydraulische pomp aangedreven door frequentieregelaar Anti-ratten bekabeling Dieptefiltratie van olie Modem Draaiuren: 40.000 Deze pers kan ook volledig gereviseerd geleverd worden volgens de 'Bollegraaf OEM Certified Refurbishment standards'. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de daadwerkelijke revisie plaatsvindt, wordt de balenpers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Spelingen Na demontage worden de toleranties van alle stalen onderdelen gemeten en waar nodig opnieuw gelast. Dit geldt in ieder geval voor de volgende componenten: • Perswagen (ram), • Frame, • Kanaal, • Voordruk-klep (pre-press-flap) Na demontage en inspectie wordt de perswagen opnieuw opgelast en voorzien van nieuwe perswielen. De beschermroosters en de voordruk-klep worden uitgedeukt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventuele herstel- en laswerkzaamheden worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en slangen worden vervangen. Hydraulische componenten worden herverpakt. De hydrauliekolie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke posities. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen voor nieuwe. Cilinders: De cilinders worden herverpakt en indien nodig voorzien van een nieuwe chroomlaag of nieuwe cilinderstang. MCC-kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (human interface) worden vervangen door de nieuwste Schneider M340 versie inclusief de nieuwste software.

Leto izdelave: 2003, obratovalne ure: 43.000 h, Stanje: potreben popravila (rabljeno), številka stroja/vozila: HBC 140 2x75kW 2003 (W230-005), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2003 Kedekcgynopfx Af Todg Hardox bodemvloerplaat uitsluitend Kunststof ventiel Anti-ratten bekabeling Draaiuren: 43.000 Deze pers kan tevens volledig gereviseerd worden verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards'. Hierbij geldt een garantie van 2 jaar. Neem contact met ons op voor meer informatie of een vrijblijvende offerte. Algemene principes van revisie Reiniging & demontage Voordat de revisie daadwerkelijk plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten nagemeten en waar nodig opnieuw gelast. Dit geldt in elk geval voor de volgende onderdelen: • Aanpersplaat (ram) • Frame • Kanaal • Voorpersklep Na demontage en inspectie wordt de ram opgelegd en voorzien van nieuwe ramwielen. De beschermroosters en de voorpersklep worden waar nodig uitgedeukt en gerepareerd. Overspuiten Na het meten van de toleranties en eventuele herstel- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen & slangen worden vervangen. De hydraulische componenten worden voorzien van nieuwe pakkingen. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en waar nodig vervangen. Alle aansluitdozen worden vervangen en gemonteerd op goed toegankelijke locaties. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vernieuwd. Cilinders: De cilinders worden opnieuw verpakt en, indien nodig, voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC-kast: De schakelkast wordt gecontroleerd en gereinigd. Waar nodig worden elektronische componenten vernieuwd. De PLC en HMI (bedieninterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 8.800 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 24 t, širina odprtine za polnjenje: 620 mm, dolžina polnilne odprtine: 1.000 mm, dolžina bale: 1.200 mm, širina bale: 700 mm, višina bale: 500 mm, teža bale: 200 kg, skupna širina: 2.825 mm, skupna višina: 1.940 mm, skupna dolžina: 6.250 mm, vhodna napetost: 400 V, moč: 9,2 kW (12,51 KM), obratovalni tlak: 220 letvica, Pressing force: 240 kN Specific pressing force: 64 N/cm² Kodevq Rpljpfx Af Tsdg Drive power: 9.2 kW Voltage / Frequency: 400 V / 50 Hz Idle cycle time: 17.2 s Theoretical idle press throughput: 73 m³/h Feed opening width x length: 620 x 1000 mm Bale width x height x length: 700 x 500 x 600-1200 mm Length x width x height: 6250 x 2825 x 1940 mm Weight: 4 t Type of consumable: Wire Material to be pressed: Film, Mixed Paper, Cardboard, Punch Waste, PET Bottles and Aluminium Cans, Soft Packaging

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 90 t, širina odprtine za polnjenje: 1.620 mm, dolžina polnilne odprtine: 972 mm, širina bale: 720 mm, višina bale: 1.100 mm, teža bale: 600 kg, skupna masa: 32.000 kg, pritisk: 300 letvica, moč: 110 kW (149,56 KM), BOA balirni stroj s dvojnimi predtlačnimi loputami je na voljo v popolnoma obnovljenem stanju. Stroj se nahaja v naši delavnici v Almelo in si ga je možno ogledati po dogovoru. Po potrebi lahko izdelamo tudi novo pripadajočo transportno stezo. Stroj je popoln za stiskanje različnih materialov, kot so karton, papir, plastika, avtomobilske pnevmatike in RDF. Stroj je opremljen s tako imenovanim refu-ramom. Ta je odličen za stiskanje materialov, kot so plastične steklenice in/ali zmleti RDF. Tehnični podatki: Pogon: 2x 55 kW Kodpfxoxbc U Ds Af Tjdg Pritisna sila: 90 ton Dimenzije bale: 1100 x 720 mm Teža bale: cca 600 kg (odvisno od materiala) Število vezalnih žic: 5 vertikalno.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 4 t, dolžina bale: 500 mm, širina bale: 700 mm, višina bale: 450 mm, teža bale: 50 kg, HSM 45 VL – Technical Specifications Feature Value Pressing Force approx. 44 kN (4.5 tons) Motor Power / Power Supply 1.5 kW / 400 V, 50 Hz (CEE 16A) Idle Cycle Time approx. 23 seconds Throughput (theoretical) approx. 38 m³/h (3–6 bales/hour) Press Chamber (W × D × H) 700 × 500 × 940 mm Filling Opening (W × H) 700 × 600 mm Max. Bale Size (W × D × H) 700 × 500 × 450 mm Bale Weight approx. 30–50 kg Machine Dimensions (W × D × H) 840 × 720 × 2085 mm Kdsdpfxswuk Nre Af Teg Filling Height 500 mm Machine Weight approx. 374 kg

Stanje: rabljeno, Leto izdelave: 2014, stiskalna sila: 122 t, skupna masa: 40.000 kg, pritisk: 315 letvica, Machine has been used by ourselves but is now surplus to requirements and therefore offered for sale! Kdodpswa N U Djfx Af Tjg

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 31.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 90 t, širina odprtine za polnjenje: 940 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.000 mm, višina bale: 800 mm, skupna širina: 5.800 mm, skupna višina: 5.680 mm, skupna dolžina: 9.050 mm, skupna masa: 16.500 kg, moč: 53 kW (72,06 KM), volumenski pretok: 190 m³/h, kapaciteta rezervoarja: 1.500 l, Oprema: dokumentacija / priročnik, Baler je v uporabi od leta 2012 in se je pretežno uporabljal za baliranje papirja, ki predstavlja približno 85 % celotne predelane količine. Preostali materiali vključujejo folijo/najlon in majhen delež plastike. Stroj je bil redno vzdrževan in je še vedno popolnoma funkcionalen. Še danes služi kot naš glavni balirni stroj v vsakodnevnem obratovanju. Obratovalni režim: 5 dni na teden, 8 ur na dan Kapaciteta: približno 50 ton na dan Leta 2023 smo zamenjali kolesa in ležaje na voziščni plošči. Črpalka za prešno komoro je nova. Stroj deluje pod odličnim pritiskom; redno dosegamo kontejnerske obremenitve do 25 ton stisnjenih kartonov. Kodpfx Asx H Rmbof Tsdg Vezalni sistem je popolnoma funkcionalen in zanesljivo deluje v konfiguraciji s 4 žicami. Bat glavnega cilindra je bil pred kratkim zamenjan z novim, montažo so izvedli lokalni serviserji. Na vezalnem sistemu in pri vzmetnem sistemu, ki preprečuje vračanje materiala nazaj v območje voziščne plošče, so bile izvedene manjše spremembe. Kanal je v dobrem obratovalnem stanju. Zaradi obrabe smo nedavno odstranili staro talno oblogo in nanesli polnilno maso (podobno betonu), da smo izravnali neravnine in pripravili osnovo za novo talno oblogo. To zagotavlja ustrezno poravnavo in trpežnost za naprej. Transportni trak je delujoč, na bočnih stenah so vidni sledovi obrabe. Gre za estetsko poškodbo, ki je jasno razvidna na priloženih fotografijah.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 26 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 630 mm, dolžina bale: 1.500 mm, širina bale: 800 mm, višina bale: 1.140 mm, teža bale: 500 kg, skupna širina: 1.060 mm, skupna višina: 2.576 mm, skupna dolžina: 2.075 mm, skupna masa: 1.220 kg, raven hrupa: 65 dB, moč: 4,6 kW (6,25 KM), Zmogljiv balirni stroj Orwak 3820 Power. Še posebej primeren za večje dimenzije kartona ali folije zaradi izjemno velikega polnilnega odprtina 1500 x 630 mm. Kjdexmvc Eopfx Af Tsdg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 5 t, širina odprtine za polnjenje: 810 mm, dolžina polnilne odprtine: 710 mm, dolžina bale: 695 mm, širina bale: 510 mm, višina bale: 600 mm, skupna širina: 920 mm, skupna višina: 2.410 mm, skupna dolžina: 940 mm, raven hrupa: 60 dB, moč: 1,1 kW (1,50 KM), Wir haben viele neue oder gebrauchte CK International Ballenpressen CK51, CK101, CK100VX, CK250, CK300VX und weitere Modelle auf Lager. Kontaktieren Sie uns gerne für ein Angebot. Kedpovy Drxsfx Af Tjdg

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, Stiskalnica za kovino Harris TGS 215 s tremi bati (3-RAM), komora velikosti 16” (približno 406 mm) kvadrat, z hidravličnim agregatom moči 600 kW in dozirnim lijakom. Video delujoče stiskalnice na voljo na zahtevo, dodatne informacije in fotografije sledijo. Kjdjw E Htuepfx Af Tjdg Stroj je izključen iz obratovanja.