Kotni obdelovalni center za okna

Weinig Unicontrol 10

Stanje: delavnici obnovljeno (rabljeno), Tenoning spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC controlled radially and axially ---- The machine was factory-refurbished by Weinig in 2024. As part of this, the control system was replaced with a Siemens S7 677 C, including a new “Touch” membrane panel. With the following machining units: Crosscut saw ---- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatic, 8 positions for top edge rounding Bottom-mounted unit for edge rounding ---- axial adjustment shared with crosscut saw Haunching and tenoning spindle ---- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm min. tool cutting circle 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial traverse path 580 mm adjustment speed 100 mm/sec. 1st profile spindle (climb and conventional milling) ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit, top ---- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit, right, at machine outfeed ---- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Klodpfoxpi Dujx Abxsu Additional accessories ---- CNC-controlled length stop, mounted on the tenoning table for lengths up to 3,500 mm, including crosscut saw integrated into the control system. Studio window facility, swivelling ±60° Double workpiece package with automatic separation and transfer Climb milling facility with window automation for rabbetting Rabbetting carriage for small sash widths Climate control unit in electrical cabinet PC control NEXUS Automatic turning system Lamella conveyor including return belt for return of workpieces to the operator (specifications as per manufacturer's information – subject to confirmation).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, potovalna razdalja osi X: 2.100 mm, pomik osi Y: 3.050 mm, pomik po osi Z: 400 mm, število osi: 4, moč vretenovega motorja: 9.000 W, Cette CNC 4 axes QUICK UA 481 a été fabriquée en 2024. Elle dispose d’une zone de travail de 2100 x 3050 x 400 mm, d’une broche HSD/HSK F 63 de 9 kW, ainsi que d’une table à vide double couche avec 6 zones. Équipée d’un servomoteur Yaskawa et de deux pompes Becker de 250 m³/h chacune, elle est parfaitement adaptée aux travaux avancés de menuiserie. Profitez de l’opportunité d’acquérir ce centre d’usinage QUICK CNC UA 481. Contactez-nous pour plus d’informations sur cette machine. • État : neuf • Alimentation : 380 V, triphasé • Broche : HSD, 9 kW, HSK F63 • Commande : NC Studio (interface en allemand) • Changeur d’outils : linéaire, 10 outils • entraînements : servomoteurs Yaskawa • Table : table à vide double couche, 6 zones Klodpfx Aex E Efvobxju Équipement additionnel • Système de vide : 2 pompes à vide Becker, 250 m³/h chacune

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled cross-cut saw with laser switching from saw cutting to zero-clearance wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd elevating spindle) D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and slotting spindle on the right side, 3 kW motor Fitting spindle 40 x 150 mm, 3 kW motor Adjustable feed rate 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop 3600 mm Return of workpiece via automatic rotary system Automation package Interval-controlled sash support Klodpjxmr N Iefx Abxou Double parts package Laminated fabric worktables (for sanded surfaces) Left-side pressure guide, max. wood width difference 100 mm Machine in very good technical and visual condition

Stanje: nepreverjeno (rabljeno), Slotted spindle, 2 pcs. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control system: Weinig, PC-Nexus Weinig Unicontrol 10 NC window production line, optionally with extensive tooling ----- Optionally available (with additional surcharge): IV 68 wood, wood/aluminium IV 78 wood, wood/aluminium IV 68 entrance doors Technical manufacturer's description: ----- Pos. 1: Weinig Unicontrol 10 NC window production line ----- Cross-cut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake, 3,000–6,000 rpm. Maximum tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically to 8 positions for edge rounding from above Horizontal rounding unit, bottom ----- Axial adjustment mechanically coupled to cross-cut saw 1st tenon and slot spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 640 mm Axial adjustment via NC axis Home position below table: 5–10 mm Radial adjustment: fixed 2nd tenon and slot spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 320 mm Axial adjustment via NC axis Radial adjustment via NC axis Home position below table: 5–10 mm 1st profile spindle (climb and counter climb) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm Horizontal top profile milling unit ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Maximum tool diameter: 130 mm Adjustment pneumatically to 8 axial and radial positions 3rd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm Kedpfxezawize Abxjlu Vertical profile milling unit right, machine end ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Maximum tool diameter: 210 mm Adjustment pneumatically to 8 axial and radial positions Further accessories -----...

Stanje: zelo dobro (rabljeno), 16 end mills with indexable inserts Manufacturer: Walter Weight: 9.5 kg Kledpjdx D Tvjfx Abxju

Stanje: rabljeno, Aggregate 10 Spindle diameter 40 and 50 mm Motor: 1x15 kW, 4x11 kW, 5x3 kW Weinig Unicontrol 10 (UC 10) angle device for the production of windows, elements, and doors. Suitable for frame production, series production, or single-piece manufacturing with 2 tenoning and mortising spindles including Oertli tool set. - Aggregates: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profiling milling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profiling milling unit, vertical right, 3 kW 9. Profiling milling unit, vertical right from above, 3 kW 10. Profiling milling unit, horizontal from below, NC axis, 3 kW - Double piece package - Rebating package with rebating carriage - Automatic turning system - NEXUS PC control - CNC-controlled length stop - Studio window setup - Edge rounding unit from below with crosscut saw - Glazing bar support strip Kljdpfxsv Ag Tdj Abxju - Incl. extraction pipe system - Incl. Oertli tool set - Further technical data and tool drawings available on request.

Stanje: rabljeno, Leto izdelave: 2000, Lokacija skladišča: Nattheim Klsdovwdmwopfx Abxou

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Klederigxyepfx Abxju Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: rabljeno, Used control cabinet from a Weinig Unicontrol 10, suitable for spare parts or for building a new control cabinet. Contents include, among others: - Siemens Simatic S5 Kedpjrrk I Hjfx Abxelu - Siemens EMG 45

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: nepreverjeno, številka stroja/vozila: 83406, Obdelovalni center za okna Weinig Unicontrol 10, letnik izdelave 1998 Kodpsy Sxlpjfx Abxjlu

Stanje: dober (rabljeno), Tilting spindle moulder, table milling machine Kedpfsh Nvyzjx Abxelu -Spindle adjustment: height and angle -Tiltable: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed unit: Holz-Her, 3 rollers -Usable spindle length: 100 mm -Spindle diameter: 30 mm -Max. cutter diameter: 220 mm -Dimensions (LxWxH): 1540/1100/1520 mm -Weight: 962 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 100 mm, pomik po osi Z: 142 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: WS 400-20, CNC machining centre from 1997. This WEINIG / DIMTER Unicontrol 10 offers a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It is equipped with a powerful crosscut saw with spindle speeds of up to 3,000 rpm and a tenoning spindle motor output of 15 kW. If you are looking for high-quality CNC machining capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details. Klodpfx Abey Ixpajxeu • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis travel: 3,000–3,500 mm (depending on version) • Crosscut saw motor power: 3.7 kW • Crosscut saw spindle speed: 2,800–3,000 rpm • Max. tool diameter for crosscut saw: 400 mm • Crosscut saw spindle diameter: 40 mm • Number of tenoning/grooving spindles: 2 pcs • Tenoning spindle diameter: 50 mm • Tenoning spindle clamping length: 400–640 mm • Max. tool diameter for tenoning spindle: 400 mm • Tenoning spindle 1 motor power: 11 kW • Tenoning spindle 2 motor power: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Number of profiling spindles (vertical): 2–3 pcs • Profiling spindle diameter: 50 mm • Profiling spindle clamping length: 320–400 mm • Profiling spindle max. tool diameter (cutting circle): 232 mm • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm • Motor power of top horizontal profiling unit: 3 kW • Spindle diameter of horizontal profiling unit: 40 mm • Max. tool diameter for horizontal profiling unit: 130 mm • Horizontal profiling unit speed: 5,850 rpm

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), moč vretenovega motorja: 11.000 W, največja hitrost vretena: 6.000 obr/min, This Weinig Unicontrol 10-5 was manufactured in 1998. It is a robust, used window production machine with a working width of 40–220 mm and a motor power of up to 15 kW for various machining units. The machine features advanced options such as a synchronization device, electronic height adjustment, and an automatic turning system to enable efficient single-operator workflow. If you’re looking for a high-quality milling machine, we recommend considering the Weinig Unicontrol 10-5, which we have available for sale. Please contact us for further information. • Capacity • Working width: 40–220 mm • Working height (longitudinal processing): 40–100 mm • Working height (cross processing): 40–100 mm (grain height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length at 320 mm tool diameter • Feed unit (cross processing) • Motor power: 0.3 kW • Feed speed: 3–25 m/min • Workpiece clamping: 2 hold-down clamps • Length stop: with scale and magnifier for measurement of sash or frame external dimensions • Counter: pneumatically indexed, 4 positions (not suitable for Studio windows), up to a maximum timber height of 80 mm • Double workpiece package: single or double part feed system, with cross separation and retention system • 1st workpiece (lying against stop) wood width: 55–90 mm • 2nd workpiece wood width: 130 mm • Feed unit (longitudinal processing) • Motor power: 2.2 kW • Feed speed: 4–18 m/min (continuously adjustable via frequency inverter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Processing units • Cross-cut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool stroke: max. 400 mm • Axial adjustment: pneumatic against four-position turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool stroke: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool reference circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool reference circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For cross-cut saw and profiling/cutting units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially switched: 2 positions • Axially switched: 2 positions • Motor power: 3 kW Kljdpfx Absx S Sk Ejxou • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 210 mm • Tool clamping length: 160 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Klsdpfsdqzcxex Abxeu Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), An angular processing line for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, tenoning spindle length: 640 mm, profiling and feed pass length: 285 mm–320 mm, control system: Siemens WS400. Includes complete tool set and sash window tooling. Documentation available. Kjdotq U A Ispfx Abxslu