Linija za izdelavo oken Weinig UNICONTROL 10

Weinig Unicontrol 10

Stanje: rabljeno, Leto izdelave: 2000, Lokacija skladišča: Nattheim Bedpjvwdmwofx Ah Ejwp

Stanje: novo, Maximum welding current: 300 A Open-circuit voltage: 55 - 76 V Supply voltage: 400 V Weight: 75 kg Dimensions (LxWxH): 950 x 560 x 880 mm Shielded gas welding machine: - with pulse function - 300 Ampere - 400 Volt - 3 m torch hose package - Earth cable Bodpfju Aw Shjx Ah Eewp - Wire feed rollers for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0 mm

Stanje: delavnici obnovljeno (rabljeno), Tenoning spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC controlled radially and axially ---- The machine was factory-refurbished by Weinig in 2024. As part of this, the control system was replaced with a Siemens S7 677 C, including a new “Touch” membrane panel. Bwedsxpi Duepfx Ah Esp With the following machining units: Crosscut saw ---- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatic, 8 positions for top edge rounding Bottom-mounted unit for edge rounding ---- axial adjustment shared with crosscut saw Haunching and tenoning spindle ---- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm min. tool cutting circle 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial traverse path 580 mm adjustment speed 100 mm/sec. 1st profile spindle (climb and conventional milling) ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit, top ---- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit, right, at machine outfeed ---- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional accessories ---- CNC-controlled length stop, mounted on the tenoning table for lengths up to 3,500 mm, including crosscut saw integrated into the control system. Studio window facility, swivelling ±60° Double workpiece package with automatic separation and transfer Climb milling facility with window automation for rabbetting Rabbetting carriage for small sash widths Climate control unit in electrical cabinet PC control NEXUS Automatic turning system Lamella conveyor including return belt for return of workpieces to the operator (specifications as per manufacturer's information – subject to confirmation).

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling the following window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 Bedpfx Aefzzhysh Eswp - Cutter heads by OERTLI Available immediately. Total price: €17,000. Condition: very good!

Stanje: novo, The Jantar is, due to its dynamics and efficiency, the most popular model among Eckert machines. It is used by both large industrial companies and medium-sized enterprises seeking an economical yet reliable solution. The Jantar plasma cutting system can be equipped with both plasma and oxy-fuel cutting systems and can be fitted with extensive accessories (marking, drilling, and processing of pipes and profiles). The machine’s design has been optimized over the years for maximum reliability, which hundreds of customers across Europe can confirm. Main Features Bwodjf Alb Aopfx Ah Esp • Attractive price for a well-equipped base version • Highly dynamic and precise cutting of 2D applications, pipes and profiles • Cutting capacity from 0.5 mm up to 100 mm material thickness • Comprehensive database of predefined cutting parameters • Optionally expandable work area length Technical Data Drive: Servo AC Available working widths: 1,500, 2,000, 2,500, 3,000 mm Available working length: Any length starting from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 100 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Repeatability: DIN-EN 28206 Electrical systems: DIN-EN 81346 Safety module: DIN-EN 13850 Working height: 740-760 mm Operating temperature: +5°C to 45°C Working humidity: max. 90%

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled cross-cut saw with laser switching from saw cutting to zero-clearance wheel, 3 kW motor Bedpexmr N Ijfx Ah Eewp 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd elevating spindle) D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and slotting spindle on the right side, 3 kW motor Fitting spindle 40 x 150 mm, 3 kW motor Adjustable feed rate 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop 3600 mm Return of workpiece via automatic rotary system Automation package Interval-controlled sash support Double parts package Laminated fabric worktables (for sanded surfaces) Left-side pressure guide, max. wood width difference 100 mm Machine in very good technical and visual condition

Stanje: nepreverjeno (rabljeno), Slotted spindle, 2 pcs. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control system: Weinig, PC-Nexus Weinig Unicontrol 10 NC window production line, optionally with extensive tooling ----- Optionally available (with additional surcharge): IV 68 wood, wood/aluminium IV 78 wood, wood/aluminium IV 68 entrance doors Technical manufacturer's description: ----- Pos. 1: Weinig Unicontrol 10 NC window production line ----- Cross-cut saw Bwsdpfjzawizex Ah Eop ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake, 3,000–6,000 rpm. Maximum tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically to 8 positions for edge rounding from above Horizontal rounding unit, bottom ----- Axial adjustment mechanically coupled to cross-cut saw 1st tenon and slot spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 640 mm Axial adjustment via NC axis Home position below table: 5–10 mm Radial adjustment: fixed 2nd tenon and slot spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 320 mm Axial adjustment via NC axis Radial adjustment via NC axis Home position below table: 5–10 mm 1st profile spindle (climb and counter climb) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm Horizontal top profile milling unit ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Maximum tool diameter: 130 mm Adjustment pneumatically to 8 axial and radial positions 3rd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm Vertical profile milling unit right, machine end ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Maximum tool diameter: 210 mm Adjustment pneumatically to 8 axial and radial positions Further accessories -----...

Stanje: dober (rabljeno), Koda: 0322 Znamka: SCM Model: L'INVINCIBILE SI 3 – CE standard Elektronska formatna žaga z upravljano osjo, nagibnim rezilom in podrezovalno enoto, namenjena za pohištvo, obdelavo plošč, izdelavo pohištva po meri, vrata, lesena okenska okvirja, kuhinje, kopalniško pohištvo, plastiko, kompozitne materiale in različno drugo – CE standard – leto 2017 Tehnični podatki: - Voziček v celoti iz aluminija s kontaktnim drsnim sistemom po kaljenih in brušenih jeklenih vodilih - Elektronska upravljalna enota EASY TOUCH 12: 12-palčni barvni ravni zaslon – Neposredno upravljanje naslednjih osi z ročnim, ročnim inkrementalnim, polavtomatskim in avtomatskim načinom: dvig glavnega rezila, nagib rezilne enote, premik paralelnega vodila, dvig in pomik podrezovalnega rezila. Pomoč operaterju z grafično podporo. Baza podatkov orodij - Pomožna funkcija za operaterja na elektronskem upravljalniku - Stensko nastavljiva upravljalna plošča - Podrezovalna enota z lastnim motorjem - Dolžina formatnega vozička: 3800 mm - Premer glavnega rezila: 400 mm - Premer podrezovalnega rezila: 120 mm - Nagib rezila: 0-45 stopinj - Maksimalna višina reza pri 90°: 140 mm - Maksimalna višina reza pri 45°: 97 mm - Hitrost vrtenja rezila: 3000/4000/5000 min⁻¹ Bwjdpjytufgsfx Ah Ejp - Hitrost vrtenja podrezovalnega rezila: 8500 min⁻¹ - Moč motorja glavnega rezila: 9,5 KM - Moč motorja podrezovalnega rezila: 1,7 KM - Širina reza do paralelnega vodila: 1500 mm - Programirani paralelni vod s THK vodenjem - Elektronska nastavitev podrezovalne enote - Pravokotni okvir s sistemom ‘COMPEX’ za poševne reze z avtomatsko kompenzacijo položaja prislona - Start/stop tipke integrirane v vozičku - Ekscentrična roka za vpenjanje obdelovanca - Podaljšek delovne površine - Pravokotno vodilo s 3 LCD prikazovalniki za položaje prislona - Popolna podpora in brezžična povezava: nastavljiv okvir za poševne reze s popolno brezžično funkcijo - Premer odsesovalne cevi: spodaj 120 mm, na zgornjem zaščitnem pokrovu 100 mm - Skupne mere sestavljenega stroja: 4200 × 4300 × 1800 mm (V x Š x G) - Mere za transport: 4200 × 2350 × 1800 mm + paleta 1600 × 1000 × 800 mm - Masa: 1140 kg

Stanje: rabljeno, Used control cabinet from a Weinig Unicontrol 10, suitable for spare parts or for building a new control cabinet. Bwsdpfx Ajrrk I Heh Eop Contents include, among others: - Siemens Simatic S5 - Siemens EMG 45

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 100 mm, pomik po osi Z: 142 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: WS 400-20, CNC machining centre from 1997. This WEINIG / DIMTER Unicontrol 10 offers a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It is equipped with a powerful crosscut saw with spindle speeds of up to 3,000 rpm and a tenoning spindle motor output of 15 kW. If you are looking for high-quality CNC machining capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis travel: 3,000–3,500 mm (depending on version) • Crosscut saw motor power: 3.7 kW • Crosscut saw spindle speed: 2,800–3,000 rpm • Max. tool diameter for crosscut saw: 400 mm • Crosscut saw spindle diameter: 40 mm • Number of tenoning/grooving spindles: 2 pcs • Tenoning spindle diameter: 50 mm • Tenoning spindle clamping length: 400–640 mm • Max. tool diameter for tenoning spindle: 400 mm • Tenoning spindle 1 motor power: 11 kW • Tenoning spindle 2 motor power: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Number of profiling spindles (vertical): 2–3 pcs • Profiling spindle diameter: 50 mm Bedpfx Ahoy Ixpae Eowp • Profiling spindle clamping length: 320–400 mm • Profiling spindle max. tool diameter (cutting circle): 232 mm • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm • Motor power of top horizontal profiling unit: 3 kW • Spindle diameter of horizontal profiling unit: 40 mm • Max. tool diameter for horizontal profiling unit: 130 mm • Horizontal profiling unit speed: 5,850 rpm

Stanje: rabljeno, Leto izdelave: 1997, - Edge banding unit - Cross-cutting unit - Milling unit - Fine milling unit Bodpfx Ahod Inkto Ejwp - Scraper - Buffing unit

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: nepreverjeno, številka stroja/vozila: 83406, Obdelovalni center za okna Weinig Unicontrol 10, letnik izdelave 1998 Bwedey Sxlpepfx Ah Eep

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), moč vretenovega motorja: 11.000 W, največja hitrost vretena: 6.000 obr/min, This Weinig Unicontrol 10-5 was manufactured in 1998. It is a robust, used window production machine with a working width of 40–220 mm and a motor power of up to 15 kW for various machining units. The machine features advanced options such as a synchronization device, electronic height adjustment, and an automatic turning system to enable efficient single-operator workflow. If you’re looking for a high-quality milling machine, we recommend considering the Weinig Unicontrol 10-5, which we have available for sale. Please contact us for further information. • Capacity • Working width: 40–220 mm • Working height (longitudinal processing): 40–100 mm • Working height (cross processing): 40–100 mm (grain height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length at 320 mm tool diameter • Feed unit (cross processing) • Motor power: 0.3 kW • Feed speed: 3–25 m/min • Workpiece clamping: 2 hold-down clamps • Length stop: with scale and magnifier for measurement of sash or frame external dimensions • Counter: pneumatically indexed, 4 positions (not suitable for Studio windows), up to a maximum timber height of 80 mm • Double workpiece package: single or double part feed system, with cross separation and retention system • 1st workpiece (lying against stop) wood width: 55–90 mm • 2nd workpiece wood width: 130 mm • Feed unit (longitudinal processing) • Motor power: 2.2 kW • Feed speed: 4–18 m/min (continuously adjustable via frequency inverter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Processing units • Cross-cut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool stroke: max. 400 mm • Axial adjustment: pneumatic against four-position turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool stroke: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool reference circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool reference circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For cross-cut saw and profiling/cutting units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially switched: 2 positions • Axially switched: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm Bsdox S Sk Eopfx Ah Eewp • Spindle speed: 5850 rpm • Tool stroke: 210 mm • Tool clamping length: 160 mm

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 14.612 h, Pogon: kolesa Bwjdpfxoyyt Uhj Ah Eop Znamka motorja: Deutz Dolžina ročice žlice/ lopate: 250 cm Za dodatne informacije se obrnite na Kristoffa Van Havereja.

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), An angular processing line for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, tenoning spindle length: 640 mm, profiling and feed pass length: 285 mm–320 mm, control system: Siemens WS400. Includes complete tool set and sash window tooling. Documentation available. Bwjdjtq U A Iepfx Ah Eop