Oblikovanje in rezkanje

Weinig U22E, 7 Spindeln

Stanje: rabljeno, Keyway Spindle 1 pc. Number of Milling Units: 5 pcs. Spindle Diameter: 50 mm Control System: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC Spindles Machine is cleaned and fully inspected prior to delivery Technical Data Summary (Please enquire about any additional included accessories) Pos. 1: Cross-Cut Saw ----- > Number of Tools: 1 pc. > Spindle Speed: 2,800 rpm > Spindle Diameter: 40 mm > Max. Tool Diameter: 400 mm > Motor Power: 3 kW > Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding > Laser Guidance for cutting section detection Pos. 2: Rounding Unit, Horizontal Lower ----- > Position: horizontal, lower Ledpovu Hghofx Ah Asak > Motor Power: 1.5 kW > Spindle Diameter: 20 mm > Clamping Length: 25 mm > Spindle Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment mechanically linked with cross-cut saw > Radial Adjustment pneumatically controlled, on/off NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and Keyway Spindle ----- > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 3,500 rpm > Max. Cutting Circle: 320 mm > Spindle Diameter: 50 mm > Max. Tool Diameter: 320 mm > Motor Power: 11 kW Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling) ----- > Position: vertical, right > Number of Tools: 1 pc. > Tool Clamping Length: 120 mm > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical, right > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 11 kW 2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash Bar Guide consisting of: Guide rail at the stop (climb milling section), Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 6: Profiling Milling Unit, Horizontal Upper ----- > Clamping Length: 40 mm > Spindle Diameter: 40 mm > Motor Power: 3.0 kW > Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment: 30 mm, 8 positions > Radial Adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool Clamping Length: 160 mm > Axial Adjustment: 115 mm, 8 positions > Radial Adjustment: 110 mm, 8-position turret > Spindle Speed: 5,850 rpm > Spindle Diameter: 40 mm > Max. Cutting Circle: 210 mm > Motor Power: 3.0 kW Pos. 8: Profile Milling/Grooving Unit, Bottom ----- > Motor Power: 3.0 kW > Tool Clamping Length: 125 mm > ...

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Set for finger jointing in medium and high volume production. The machine is technically efficient and in good condition. The set includes several tool kits. Features: – Industrial set with a single tenoning machine. Operator-supervised pack loading allows for processing of lower grade raw material, – Process controlled by microprocessors (automatic control), – Rotation of the pack after each cycle on a rotary table (butt joint) or flipping the pack on its back (face jointing for furniture, unique GOMA solution), – Set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specification Values Spindle diameter (milling): 50 x 210 mm Spindle speed: 6,000 rpm Main motor: 18.5 kW Lajdpfxslu D Tfj Ah Aek Tool dimensions: 250 x 160 mm Saw spindle: for trimming board ends Special chipper: 300 x 8 mm Chipper motor: 6 kW / 3,000 rpm Feed table: infinitely variable speed Working width x height: 600 x 30–160 mm Glue nozzle profile: according to tooling FC-10 PZ6/2 PRESS Specification Values Board width: 30–160 mm Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 – 7.5 – 10 T Hydraulic power unit: 3 kW / 140 bar

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition Lodpferigxyox Ah Aeak

Stanje: novo, Technical data: Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding shoe width: 50 mm Lodpfxsgtm U Aj Ah Ajak Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES

Stanje: zelo dobro (rabljeno), Four-sided planer Weinig Unimat 23 EL Working width: 230 mm Ljdpfx Asrb An Ush Aeak Working height: 160 mm Cutterhead configuration: Bottom: 5.5 kW Right: 4 kW Left: 5.5 kW Right: 4 kW Top: 11 kW Bottom: 5.5 kW Top: 7.5 kW Bottom: 7.5 kW Feed speed adjustable via variator: 6–36 m/min Feed powered by cardan shaft Feed rollers integrated in table Pneumatic pressure elements CE certificate Year of manufacture: 2003

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Fully automatic finger jointing line: Type Doppel-Pack with automatic infeed with multi-blade cross-cut saw with stacking unit Specification: Wood infeed length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Outfeed wood length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger joint execution vertical and horizontal Glue type: PVAC white glue, double-sided glue application Electrical data: Connection voltage: 400 V Control voltage: 24 V 50 Hz Lajdsg D Ugkepfx Ah Ask Plant completely wired up to the control cabinet. Finger length / possible wood cross-section and glue type can still be adapted Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Table width: 600 mm Glue application: double-sided application

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Wide Belt Sander OTT ALPHA 110 - Machine in stock - After technical inspection - Very good condition - Made in Germany - Year of manufacture: 1996 - Segmented shoe – ideal solution for lacquer / veneer work TECHNICAL SPECIFICATIONS: - Working width: 1100 mm - Working height: 1–150 mm - Combi unit with membrane shoe, task-controlled - Main unit motor power: 11 kW - Belt air jet cleaning - Pneumatic belt oscillation - Two belt speeds: 4.5 and 18 m/s - Unit with felt drum - Drum motor power: 0.75 kW - Drum oscillation - Cleaning brush unit - Brush motor power: 0.75 kW - Feed speed steplessly adjustable - Feed speed range: 4–18 m/min - Feed motor power: 1.5 kW - Electric height adjustment - Vacuum table - Fan motor power: 3 kW - Extraction port diameters: 4 x 120 mm, 1 x 150 mm Lajdsgi Dryspfx Ah Aek Transport dimensions: - Length: 200 cm - Width: 245 cm - Height: 210 cm - Weight: 2,500 kg 1. The Alpha Combi unit is a sanding module with a 150 mm diameter contact roller (hardness 90 Shore) integrated with a sectional pneumatic shoe with section width 27 mm. 2. EMS 27 optical system – detects minimal surface irregularities and adjusts the pressure of individual shoe sections at specific locations on the workpiece. 3. Control of adjacent shoe sections is possible within a range of -2 to +4.

Stanje: rabljeno, Leto izdelave: 2004, WEINIG GRECON DOUBLE-END FINGER JOINT LINE MOD. PJ 150/500 - CE - USED - Infeed wood length: 150 - 700 mm - Wood width: 40 - 150 mm - Wood thickness: 18 - 80 mm - Press length: 6100 mm Laedowry I Espfx Ah Ask - Pressing force: 120 kN - Milling motor: 15 kW - Scorer: 5.5 kW - Year: 2004 CE

Stanje: novo, Število vreten: 6 kos Delovna širina: 250 mm Višina skobeljenja: 150 mm Dolžina poravnalne mize: 2500 mm Motor za podajanje: 4 kW Hitrost podajanja: 6-24 m/min Teža: 4770 kg Dimenzije (D/Š/V): 4722x1860x1776 mm Štiristranski skobeljni stroj Kuper SWT XL-6 v okenski izvedbi z elektronskim aksialnim in radialnim nastavljanjem vreten. Masivno ogrodje stroja, nepopustljivo in z nizko vibracijo. Lasdpevnv Ubsfx Ah Ajk Število vreten: 6 Delovna širina: 250 mm Delovna višina: 150 mm Dolžina poravnalne mize: 2500 mm Hitrost vreten: frekvenčno krmiljena 4.000 - 8.000 vrt/min Hitrost podajanja: 6-24 m/min Podroben opis najdete v pripeti PDF datoteki! (Tehnični podatki po navedbah proizvajalca - brez garancije!)