Štiri stransko skobljalo

KUPER SWT XL-6 Fenster, CNC-Spindeln

Stanje: rabljeno, Keyway Spindle 1 pc. Number of Milling Units: 5 pcs. Spindle Diameter: 50 mm Control System: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC Spindles Machine is cleaned and fully inspected prior to delivery Technical Data Summary (Please enquire about any additional included accessories) Pos. 1: Cross-Cut Saw ----- > Number of Tools: 1 pc. > Spindle Speed: 2,800 rpm > Spindle Diameter: 40 mm > Max. Tool Diameter: 400 mm > Motor Power: 3 kW > Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding > Laser Guidance for cutting section detection Pos. 2: Rounding Unit, Horizontal Lower ----- > Position: horizontal, lower > Motor Power: 1.5 kW > Spindle Diameter: 20 mm > Clamping Length: 25 mm > Spindle Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment mechanically linked with cross-cut saw > Radial Adjustment pneumatically controlled, on/off NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and Keyway Spindle ----- > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 3,500 rpm > Max. Cutting Circle: 320 mm > Spindle Diameter: 50 mm > Max. Tool Diameter: 320 mm > Motor Power: 11 kW Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling) ----- > Position: vertical, right > Number of Tools: 1 pc. > Tool Clamping Length: 120 mm > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical, right > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 11 kW 2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash Bar Guide consisting of: Guide rail at the stop (climb milling section), Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 6: Profiling Milling Unit, Horizontal Upper ----- > Clamping Length: 40 mm > Spindle Diameter: 40 mm > Motor Power: 3.0 kW > Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment: 30 mm, 8 positions > Radial Adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool Clamping Length: 160 mm > Axial Adjustment: 115 mm, 8 positions > Radial Adjustment: 110 mm, 8-position turret > Spindle Speed: 5,850 rpm > Spindle Diameter: 40 mm > Max. Cutting Circle: 210 mm > Motor Power: 3.0 kW Ffsdpfx Afjvu Hghjlet Pos. 8: Profile Milling/Grooving Unit, Bottom ----- > Motor Power: 3.0 kW > Tool Clamping Length: 125 mm > ...

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Samodejno nalaganje in razlaganje Napredne zmogljivosti obdelave Idealno za serijsko proizvodnjo Izboljšajte svojo proizvodnjo oblog vratnih podbojev z napravo Centauro Alfa Jamb – najsodobnejšim strojem, zasnovanim za samodejno nalaganje, obdelavo in razlaganje vratnih oblog in podbojev. Centauro Alfa Jamb združuje natančnost, učinkovitost in uporabniku prijazno tehnologijo ter predstavlja najboljšo rešitev za izdelavo vratnih podbojev. Zmogljiva glava CNC rezkalnika omogoča izvedbo tako vertikalnih kot horizontalnih obdelovalnih operacij. Ta vsestranska rezkalna glava je idealna za izdelavo utorov za tečaje ali ključavnice ter zagotavlja, da je vsak rez narejen natančno in dosledno. Poleg tega je priloženo tudi specializirano majhno rezkalo, namenjeno točkovnemu vrtanju lukenj za vijake tečajev in poravnavanju kotov utorov za tečaje, kar dodatno izboljša natančnost in kakovost končnega izdelka. Fodsul Uaaepfx Afleft Alfa Jamb avtomatizira celoten proces od nalaganja do razlaganja, tako da se lahko operaterji posvetijo zahtevnejšim nalogam, medtem ko stroj opravlja ponavljajoče se postopke. Programiranje je poenostavljeno s sodobnim barvnim kapacitivnim zaslonom na dotik TOP12-S, ki omogoča intuitivno uporabo. Prednameščene elektronske makro nastavitve omogočajo hitro pripravo in spreminjanje obdelovalnih operacij. Tehnične specifikacije: X os hod: 2800 mm Y os hod: 180 mm Z os hod: 150 mm Primeren za podboje dimenzij 2400 x 200 x 75 mm Glava za rezkanje/vrtanje: 3,3 kW, ER25, 0–18.000 rpm Glava za vrtanje pilotnih lukenj: 2,2 kW, ER25, 0–18.000 rpm 3 pnevmatske vertikalne prijemalne klešče, samodejno aktivirane skozi program 3 pnevmatske horizontalne prijemalne klešče, samodejno aktivirane skozi program Industrijski zaslon na dotik TOP12-S, 12'', z enostavnim makro programiranjem CE varnostna ograja ob straneh in zadaj ter svetlobna pregrada spredaj Priključek za odsesavanje prahu: 120 mm Pnevmatska povezava: 6 bar Skupne mere: 9644 x 1844 mm Skupna teža: 2000 kg Skupna priključna moč: 5,6 kW Letnik: 2023, v skladu s CE Stanje: kot novo, uporabljeno le za demonstracije v razstavnem salonu

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application area Clean air extraction systems for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a corresponding extraction port diameter Also suitable for multiple dust sources High-quality, well-engineered construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily switched from left to right, enabling flexible use Large service openings Large-volume, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for quick commissioning Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Ffodpfecnw U Dex Aflot Filter as standard in antistatic version, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp at control panel Fan positioned downstream of the filter Features: With innovative locking device for secure container positioning All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed castors and 2 swivel castors with parking brake Pre-fitted for connection of machine detection for up to 8 machines and slide controls Manual cleaning Sound pressure silencer available as accessory Model: RLA 125 M Item No.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal airflow: 1,095 m³/h Max. airflow: Vacuum at nominal flow: Filter surface area: 5.31 m² Filter material: dust class M Residual dust content: 0.1 mg/m³ Chip container volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1,100 x 830 x 1,650 mm Height from bottom of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Stanje: rabljeno, Hobel- und Kehlautomat Weinig Powermat 700 za štiristransko skobljanje in profiliranje lesa s CNC upravljanjem. Na voljo po dogovoru od marca 2026. Prodaja stroja je pogojena s prodajo briketirnega stroja: Ref. št. 800055 ali celotnega skobljarskega obrata: Ref. št. 100101 Vretena: 6 Vreteno 1: spodaj / 7,5 kW / 6.000 obr/min Vreteno 2: desno / 15 kW / 8.000 obr/min Fedexpuufspfx Afloft Vreteno 3: levo / skupni motor z #2 / 8.000 obr/min Vreteno 4: zgoraj / 11 kW / 8.000 obr/min Vreteno 5: zgoraj / 7,5 kW / 8.000 obr/min Vreteno 6: spodaj / 7,5 kW / 8.000 obr/min Delovna širina: 230 mm Delovna višina: 160 mm Premer vretena: 40 mm Podajalna hitrost: 40 m/min / 5 kW Dolžina ravnalne mize: 1.200 mm Upravljanje: Memory Plus

Stanje: dober (rabljeno), 10,000 Pieces of Insert Grating / Wire Mesh Decks for Pallet Racking, Galvanised Finish Insert gratings are available in various dimensions, mesh widths, bar specs, and load capacities: Negotiable price: from €15.00 net per m² ex stock. Larger quantities available on request! Insert Grating Mesh Size Load Bar Bar Direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm Ffsded Hvvgepfx Aflot 133 x 99 cm 3 x 3 cm 30 x 2 mm 99.5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Used equipment in excellent condition, see photos. Item is in stock. Transportation available on request. Inspection possible by appointment at any time. Further information available on request. Over 5,000 linear meters of pallet racking from various manufacturers in stock at all times. (Technical specifications, information, prices, and prior sale subject to change. Please see our General Terms and Conditions. All prices are exclusive of VAT, ex works.) Purchase/Sale We are always seeking and offering a wide variety of items from various categories: - broom-clean facility liquidations - business closures - Fast – flexible – efficient! We also clear and/or dispose of inventory for insolvency administrators. Please contact us with key details and we will respond promptly. To visit our website, please click on our logo!

Stanje: dober (rabljeno), Approx. 30 linear meters of shelving system Schaefer R3000 Manufacturer: Schaefer R3000 Condition: As new, see photos. More than 300 meters available in stock. Uprights, galvanized, height 2.5 m, depth 40 cm Shelves, galvanized, 100 kg load capacity per shelf, bay width approx. 100 cm Fedpfx Aecfhx Tsfljft Asking price: €2,890.00 net ex-works Scope of supply: 31 upright frames, 2.5 m, galvanized 90 shelves, 100 kg load capacity per shelf, galvanized 10 cross braces for stabilization 3 shelf levels per bay (additional levels available at extra cost) Other configurations possible. Heights available: 2.3 m, 2.5 m, or 3 m. Goods are in stock. We always have over 3,000 linear meters of pallet racking from various manufacturers in stock. Transport and assembly available upon request. Further information available on request. (Subject to change and errors in technical data, specifications, and prices. Sale subject to prior sale. Please refer to our terms and conditions. All prices exclude VAT, ex-works.) Purchase / Sale: We are continuously buying and selling a wide range of items from various sectors. To visit our website, please click on our logo! - Swept clean business clearances - Company liquidations - Fast – flexible – efficient! We also clear out and/or dispose of inventory for insolvency administrators. Please send us a brief inquiry, and we will get back to you promptly.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, delovna širina: 260 mm, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 260 mm, delovna višina: 170 mm, moč pogonskega motorja podajalnika: 4.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, število vreten: 5, vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Profimat 23 E Delovna širina: 260 mm, Delovna višina: 170 mm, 5 vreten, Premer vretena: 40 mm, Razporeditev vreten: 1- Spodaj - 5,5 kW Ffedpfx Aovgnb Rjflst 2- Desno + 3- Levo - 11 kW 4- Zgoraj - 5,5 kW 5- Spodaj - 11 kW Pomik: 6 – 24 m/min - 4 kW Zračni jastuk v mizi En pogonski valj v mizi pri izhodu. Z orodjem.

Stanje: dober (rabljeno), Leto izdelave: 2016, Kupujem večlistno žago slovenskega proizvajalca MEBOR VR900. Višina reza pod rezilom 160 mm / možnost nastavitve. Fjdpfexxgy Ssx Afloft Širina reza na transportnem kolesu največ 900 mm. 1 kos premično žagin list z laserjem. Premer glavnega žaginega lista 300–500 mm. Motor 55 kW. Skupna teža cca 4000 kg. Vključno z žaginimi listi in distančnimi obroči. Stroj je na zalogi v Kežmaroku, Slovaška. Takoj na voljo.

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 625 mm, Hundegger joinery line with mechanization 5 axes Working width: 625 mm with tooling Fedpfxsv Ubtcj Afloft

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Celaschi squaring machine 4+4 motors Opening width 3000 mm Fsdpfx Aevx Afnefljft Option for complete overhaul available