Večlistna robilna žaga z lebdečim rezilom

WEINIG K 23T 245/120 laser

Stanje: novo, Bester Preis: 4499 EUR (EXW Jonava, Litauen) Abmessungen des Schiebeschlittens: 2200 x 375 mm Max. Schnittlänge: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl Hauptsäge: 4.500 / 6.000 min⁻¹ Hauptsägewelle Durchmesser: 30 mm Sägeblatt schwenkbar: 0–45° Sägenhub, Heben und Senken mit elektrischer Steuerung Hauptmotor: 5,5 kW Nsdpfx Ahjdnxydj Iswd Vorschnittsägeblatt Durchmesser: 120 mm Drehzahl Vorschnittsäge: 7.000–8.000 min⁻¹ Vorschnittsägewelle Durchmesser: 20 mm Vorschnittmotor: 1,1 kW Gewicht: 700 kg * Beim Einsatz eines 400-mm-Sägeblatts muss das kleinere Blatt entfernt werden. * Reduzierte Sägeblätter dürfen nur mit maximal 350 mm Hauptschutz verwendet werden.

Stanje: novo, Leto izdelave: 2022, New machine Year of manufacture: 2022 Basic equipment: - Electromotive height and tilt adjustment, 0–46°, with automatic correction of cutting height during tilting - Controls at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm - Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm - Saw blade projection: max. 150 mm - Max. saw blade diameter: 450 mm - Motor power: 4 kW (5.5 HP) at 4,000 rpm - AKE tool clamping system for main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed control from 2,000 to 6,000 rpm - Exact speed adjustment to the material increases cut quality and blade service life Extended cutting height for single-side tilting This option is for single-side tilting and comes with a large extraction hood for a max. saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the max. saw blade diameter is 500 mm, respectively 179 mm cutting height. Only available with at least 5.5 kW (7.5 HP) motor power. Nwsdpfx Ahsw I Uxcs Ijd 2-axis scoring unit for single-side tilting With electromotive height and lateral adjustment, programmable scoring blade height with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting only possible on machines prepared for scoring unit installation. LED lighting Highly energy-efficient LED technology makes the hazardous area of the scorer clearly visible. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be infinitely locked in any position. The large double rollers, precision-manufactured from hardened steel, ensure perfect guidance of the top carriage to the bottom carriage via hard-chromed guide rods. This running quality is maintained even under decades of operation and exposure to dust. The carriage is built as an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, integrated flush with the top carriage, serves as a support for the cross-slide and as an interface for various accessories. The complete unit is low-maintenance and does not require lubrication. On/off switch on the double roller carriage The on/off switch is always within easy reach on the double roller carriage. With four buttons, both the main saw blade and the scorer can be switched on and off, saving steps and increasing safety. Angle mitre fence, cross cuts up to 3,500 mm This ALTENDORF-patented fence with integrated length compensation makes precise angle and mitre cuts in one operation much easier. In both positions, the swivelling angle is infinitely adjustable up to 49° and displayed via scale. The play-free and robust stop flaps can be easily shifted and set as individual flaps across the entire range up to max. 3,500 mm.

Stanje: rabljeno, Leto izdelave: 2015, NC 1000 Numeric Control Biesse Works Advanced Software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Working stroke in Z-axis: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lifting table Automatic labeller for barcode printing Automatic print and application system for adhesive labels No. 1 vertical electrospindle preset for 4 axes (C-vector axis) with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Knife unit integrated in the drilling head on the X-axis – Diameter: 120 mm Automatic tool change system with 8 positions – positioned on the machine operation head Automatic tool change system with 21 positions – positioned at the rear of the machine with chain Drilling head BH 40 L with independent spindles arranged as follows: - 17 vertical in X-axis - 12 vertical in Y-axis - 6 horizontal in X-axis Nwsdpfx Aewt Snyoh Ijd - 4 horizontal in Y-axis Automatic unloading system with motorised conveyor Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning for the control cabinet 2 vacuum pumps, 250 m³/h each

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition Nwederigxyspfx Ah Iod

Stanje: dober (rabljeno), Leto izdelave: 2020, Masterwood Project 351 L 3-osiowy CNC Opis Chłodzony powietrzem 3-osiowy elektrowrzeciono frezujące 17,5 KM (HSK-63F) Przemiennik częstotliwości umożliwiający programowanie prędkości obrotowej 1.500–24.000 obr./min Zmieniacz narzędzi na 22 pozycje 6 pneumatycznych, wpuszczanych prowadnic paneli do załadunku/pozycjonowania ciężkich elementów Przygotowane do montażu docisków 2 poziome dociski do drewna klejonego warstwowo 6 punktów bazowych wzdłuż osi X (pozycjonowanie paneli przy tylnej krawędzi podpór) 8 punktów bazowych wzdłuż osi X (pozycjonowanie paneli w połowie długości podpór) Pełne odniesienie po prawej stronie wzdłuż osi Y Pełne odniesienie po lewej stronie wzdłuż osi Y 2 pola robocze 1 x pompa próżniowa 100 m³ 24 przyssawki próżniowe Pilot radiowy z cyfrowym wyświetlaczem Automatyczny system pomiaru narzędzi Taśmociąg do transportu odpadów Agregat wiertarski z 19 wrzecionami (rozstaw 32 mm) 2,2 kW - 7 pionowych wrzecion w kierunku X - 6 pionowych wrzecion w kierunku Y - 4 poziome wrzeciona w kierunku Y - 2 poziome wrzeciona w kierunku X (wszystkie wrzeciona wiertarskie programowane niezależnie) Jednostka sterująca z komputerem PC Oprogramowanie SINCRO CAD/CAM MASTERWORK Dane techniczne Zakres roboczy w osi X: 5.130 mm Zakres roboczy w osi Y: 1.550 mm Prędkość w osiach X-Y: 80 m/min Prędkość w osi Z: 25 m/min Nodpfx Asvu U Itsh Iowd Maks. grubość obrabianego elementu: 200 mm Moc silnika frezującego: 17,5 KM (S1) Obroty elektrowrzeciona frezującego: 1.500–24.000 obr./min Agregat wiertarski: 3 KM System uchwytów narzędziowych: HSK63-F Zmieniacz narzędzi: 22 pozycje Pompa próżniowa: 100 m³ Średnica króćca odpylającego: 250 mm Wydajność powietrza: 4.500 m³/h Prędkość powietrza: 30 m/s Ciśnienie robocze sprężonego powietrza: 7 bar Zużycie sprężonego powietrza: 300–500 l/min Wartość zabezpieczenia: 40 A Waga: 7.000 kg (Wszelkie zmiany, błędy w danych technicznych, informacjach i cenach zastrzeżone. Dostępność może ulec zmianie. Bez gwarancji na dane drukowane!) Najlepsze maszyny do obróbki drewna z Holandii

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), I am selling the following window manufacturing set: Nodpsfzzhyofx Ah Iowd - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Available immediately. Total price: €17,000. Condition: very good!

Stanje: novo, Dimensions (LxWxH): 2480 x 1230 x 65 to 105 Width: 1230 Length: 2480 Weight approx.: 675 kg The welding and assembly tables of the SMT flex series are robust, height-adjustable, and practical workstations designed for handling heavy workpieces, working with electrically powered tools, or working with chemical and oily substances. The tables are equipped with transport rods in the base rails, allowing them to be easily moved using a pallet truck and quickly adjusted in height to match other work surfaces. The height adjustment covers a range from 650 mm to 1,050 mm (lower working heights available on request). The solid steel worktop, up to 20 mm thick, can withstand heavy impacts or blows—such as those that occur frequently when working with heavy hand tools or handling very heavy metal workpieces or tools—without causing permanent deformation or indentations. The metal worktop allows for unrestricted use of magnetic clamps to fix components in place. Thanks to its high dead weight, this universally applicable table offers excellent stability against tipping, even when loaded with heavy items or tools at its highest working position. For accessories and further information, please follow this link: Nsdpfxofk Ah Ne Ah Iswd

Stanje: rabljeno, Leto izdelave: 2004, Used machine Year of manufacture: 2004 Features and Technical Data: Nwodpsvymdqsfx Ah Iod Edge feed for coil and strip material Jointing unit with 2 milling heads Cartridge glue application system 3-roller pressure section End trimming unit Radius milling unit Radius scraper unit Corner copying unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Max. edging height: 55 mm Min. edging strip length: 350 mm Max. edging overhang per side: 3 mm Min. workpiece width: 60 mm Min. workpiece length: 180 mm Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6480 x 1250 x 1690 mm Availability: short-term Location: Flörsheim

Stanje: novo, Leto izdelave: 2022, Working width: 630 mm Planing height: 300 mm Cutterhead: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: mechanical counter Feed speed: 7-11-15-19 m/min Infeed roller: segmented steel Pressure bar: segmented Outfeed roller: rubber Table rollers: no Table extension: yes, infeed and outfeed Motor power: 7.5 kW Extraction connection: 160 mm Nedpfxjhpl T Ho Ah Ijwd Machine length: 1070 mm Machine width: 900 mm Weight: 750 kg

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), I am selling the Weinig Univar 10 window profile doubling center. Year of manufacture: 1998. Milling heads: OERTLI. Available immediately. Unit price: 8,500 euros. 4 units available. Condition: very good! Nodpfx Ahsfzzhro Iowd