Križni oblikovalec

Stegherr KSF

Stanje: novo, Number of milling spindles: 2 pcs. Stop 1: yes Tool: yes Crossbar milling machine STEGHERR TYPE KSF-mini including standard stop with 2 sliding stops, without tools The KSF-mini enables all common crossbar joints to be produced quickly and with precise fit. Precision machining is achieved by processing the workpiece on three sides in one single clamping operation. The tool drive is powered by two three-phase motors; the workpieces are clamped pneumatically. The profile cutter is dimensioned for the web width. The saw blades used for making the rebates are adjustable to the profile cutter dimensions by means of spacer rings. The swivelling device is backlash-free. The machine is designed for a maximum workpiece cross section of 56 x 46 mm. Voltage Europe: 400V (+/-10%) / 3Ph / 50Hz, USA: 440V (+/-10%) / 3Ph / 60Hz Other voltages available on request. Operating manual in German or English. Table stand €1,030.00 Foot switch €870.00 Optical setting device €130.00 Profile cutters in HM-Wepla design, available diameters: 5, 7, 9, 11, 13 mm. Price per piece: €630.00 1 set of replacement reversible knives for profile cutter (=10 pieces): €180.00 HM saw blade, price per piece: €160.00 (For a web width of e.g. 10 mm, 3 saw blades are required) Iodpjyrtzqsfx Adkjap Machine setting for customer-supplied tools, price per individual tool: €680.00 Packaging in wooden crate (suitable for land transport): €650.00 Packaging on pallet, shrink-wrapped (only within Europe, not for air freight): €340.00 Ex works price, unpacked, uninsured; for deliveries within Germany, plus VAT applicable at the time of delivery. (All technical information according to manufacturer, without guarantee!)

Stanje: generalkompletno obnovljen (rabljeno), Rezkar za prečne križne letve Rsc Tccgsx Rdw Ioxasck Proizvajalec: Stegherr Tip: KSF Namenjen je za rezkanje spojev prečnih letvic, na primer v oknih, vratih in pohištvu. Opremljen s 3 rezkalnimi agregati: Eden zgornji in eden spodnji rezkalni agregat izvajata vzporedno rezkanje, ki spominja na poševne reze, tretji agregat pa istočasno poravnava. Delovna miza stroja se premika pnevmatsko-hidravlično. Proc Tccjw Imhcogxaef Hitrost pomika in povratka je nastavljiva. Nadzor z nožnim stikalom. 2 motorja, vsak z močjo cca 2,2 kW Skupna priključna moč cca 4,5 kW Tlak stisnjenega zraka: 6 bar Napetost: 380 V 50 Hz Isdpfx Ajx Rhwlodkjap Premer odsesovalnega priključka: 180 mm

Stanje: rabljeno, Leto izdelave: 1996, End stop yes yes /no Machine dimensions 1000x1000x1300 mm Weight 800 kg Cross Mullion Router STEGHERR KSF-2 / E-4 - Year of manufacture: 1996 - Serial No.: 57/9961 - Function-tested - Including milling tools: 1. Upper milling unit for 90° slotting 2. Lower milling unit for 90° slotting 3. Rear milling unit for flattening 4. Milling unit for processing the counterpart without turning - Length stop with electronic measuring system up to approx. 2500 mm - Tool diameter 2 x 130 mm / 2 x 160 mm - Motors: 3 x 1.1 kW Iaodpfx Asxq Hiqjdkop - Voltage: 400 V, 50 Hz - Workpiece max. 56 x 80 mm – min. 8 x 6 mm - Extraction nozzle D = 150 mm - Machine dimensions L=1000 mm, W=1000 mm, H=1300 mm - Length stop dimensions L=3000 mm, W=1000 mm, H=2000 mm - Total weight approx. 800 kg The KSF-2/4 cross mullion router is successfully used worldwide. Our customers appreciate the precision, robustness, and versatility of this proven machine. The notches for the cross mullion are made in one operation by an upper and a lower milling unit, and the flattening is done by a third milling unit. Once the workpiece is inserted and the button is pressed, clamping and cross mullion routing is automatic. The additional front grooving unit (the fourth unit) enables chip-free, perfectly machined muntin crosses on the visible side even for pre-profiled bars. This ensures the high fitting accuracy of all cross mullions produced with our KSF-2/4 cross mullion router.

Stanje: rabljeno, Number of milling spindles: 2 pcs. Stop: 1 pc. Tool included: yes Iaedpfxswi Upfs Adkep Cross rail milling machine STEGHERR, model KSF-mini ----- Including stop rail with measuring scale and sliding stop. Including tools. Special milling machine for efficient production of cross muntin joints. The cross rail milling machine KSF-mini is the result of STEGHERR's extensive experience in the construction of these specialized machines for cross muntin joinery. With the KSF-mini, all types of cross muntin joints commonly found in practice can be produced quickly and with a precise fit. Pre-profiled muntins can also be processed on the KSF-mini. Precise recessing is achieved as the workpiece is processed on three sides in a single clamping operation. The tool drive is provided by two three-phase motors; workpiece clamping is pneumatic. The profile cutter is designed for the bar width. The saw blades used for notching can be adjusted to the dimensions of the profile cutter using spacers. The machine is suitable for a maximum workpiece cross-section of 56 x 46 mm. Motor: 2.2 kW, 380 V, 50 Hz Pneumatic pressure: 6 bar Included: ----- Table stand Foot switch Tools as shown in the pictures: 1 profile cutter 3 saw blades (for bar width 10 mm) Stop rail with measuring scale and sliding stop as shown in the photos. Installation dimensions (approx. LxWxH): 1,330 x 570 x 1,430 mm Weight: approx. 150 kg (All technical data as per manufacturer, without guarantee!)