Oblikovalnik z vrtljivim vretenom

SCM L'invincibile Ti 5

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Optimizing cross-cut saw from 2018. This WEINIG DIMTER Opticut S90 is equipped with a 500 mm saw blade diameter and a maximum cutting height of 120 mm. It is suitable for infeed lengths of 400 to 6,300 mm and widths of 20 to 300 mm. If you are looking for a high-quality cutting machine, consider the WEINIG DIMTER Opticut S90 we have for sale. Contact us for further details. • Saw Blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40-100% via frequency converter • Workpiece Capacity • Infeed length (min/max): 400-6,300 mm • Width (min/max): 20-300 mm • Thickness (min/max): 10-120 mm • Maximum cutting height: 120 mm Fgodpfoylmmmox Acdof • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max. 2 mm/m or 8 mm over the entire length • Table tilt: 10° • Movement and Accuracy • Positioning speed (return stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and Power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical power: approx. 15 kW • Control and Interface • Control unit: OptiCom Pro with 18.5" touchscreen • Display resolution: 1366 x 768 pixels • Degree of protection (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Operating Resources and Environment • Voltage: 400 V / 50 Hz • Operating pressure: 6-8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction nozzle: Diameter 125 mm • Required extraction performance: Speed approx. 30 m/s; Volume approx. 1,300 m³/h • Noise level (idle): ≤ 85 dBA

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension Fjdpfev Erkasx Acdogf T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), največja širina rezanja: 1.000 mm, premer žaginega lista: 550 mm, nastavitev nagiba žaginega lista: 45 °, Oprema: CE označba, dokumentacija / priročnik, zaščitni pokrov žaginega lista, Upravljanje prek zaslona; vzporedno vodilo; shranjevanje 20 programov; dvojni kolesni voziček 3000 mm; širina reza 1000 mm; višina reza 200 mm; podaljšanje mize 840 mm; možne tri hitrosti: 3, 4, 5 obr/min Fodpfx Aey Nyuaocdogf

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.670 mm, pomik po osi Z: 500 mm, število osi: 4, This 4-axis CNC machining center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1,000–24,000 rpm and C-axis rotation from 0–360°. The machine is equipped with a linear tool changer with 12 positions and a comprehensive drilling head with 16 spindles. In addition, it has a robust safety system with light curtain. Take advantage of this opportunity and purchase this CNC machining center Felder Format 4 Profit H 200. Contact us for further information about this machine. • Automatic central lubrication Fsdpjx D D Hmjfx Acdjgf • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depending on clamping system) • Operator terminal on the left side of the machine • Handheld terminal with axis speed control and emergency stop • Software: Woodflash (CNC panel, tool database, program editor) • Position display for workpiece support and vacuum suction pads • Vacuum connection for template routing (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction capacity 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1,000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-position linear on the left side of the machine frame, including storage for aggregates; max. tool diameter 250 mm; max. tool length 240 mm • Drilling head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling depth 70 mm; shank diameter 10 mm • Grooving saws: 2 (one X, one Y); max. blade diameter 120 mm; max. thickness 5 mm; continuously adjustable speed up to 7,500 rpm • Safety: Front light curtain system

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, DMG DMU 50 3+2 osi VRETENO – prenovljeno 01/2026 Krmilnik Heidenhain iTNC 530 Delovni čas: 11.275 ur programa Hod osi x: 500 mm Hod osi y: 450 mm Hod osi z: 400 mm Krmilnik iTNC 530 Heidenhain Območje vrtljajev – glavna vretena 20 – 10.000 min/-1 Oprema za orodje SK 40 DIN 69871 Ploščina za pritrditev mize 700 x 500 mm maks. obremenitev mize 500 kg T-utor 7x14x63 mm Fjdpeza T A Defx Acdegf Število mest za orodje 30 maks. teža orodja 6 kg Hitri pomik 24 m/min Vlačna sila 4,5 kN Hitrost podajanja 1 – 24.000 mm/min Skupna poraba električne energije 26 kVA Teža stroja približno 4,5 t Potrebna površina približno 4,5 x 3,5 x 2,3 m Odstranjevalec sekancev Ročno kolo Merilna sonda Pištola za hladilno tekočino na voljo takoj

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 942, skupna dolžina: 9.170 mm, skupna širina: 1.635 mm, skupna višina: 3.100 mm, skupna masa: 4.140 kg, vhodni tok: 44 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, moč: 21 kW (28,55 KM), teža obdelovanca (maks.): 800 kg, pritisk: 7 letvica, Lattuada TL10 AV C ravno linijski brusilnik robov z možnostjo mitre 0-45°, cerij. Obnovljen v našem skladišču v Belgiji. Preizkušen in pripravljen za uporabo. Fgodpfx Asw U Nzrocdof

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-KBK1, DEMAG KBK overhead crane system, crane runway dimensions approx. 12m x 3.5m Other dimensions available upon request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical specifications of the system: Crane runway made of Demag KBK1 rails System will be delivered complete: KBK rails, rail connectors, trolleys, end plates, cable festoon system, power supply, brackets/suspenders, etc. Incl. 1 bridge with 125 kg Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Fgedpfjpiarnjx Acdjf Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with load capacities from 125 kg to 1600 kg are also available. Please enquire about your crane runway with required cantilever load and dimensions.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Fgsdpfxsdqzcxs Acdjf Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 760 mm, premer struženja: 376 mm, moč vretenovega motorja: 22 W, največja hitrost vretena: 4.000 obr/min, skupna masa: 6.100 kg, Stroj PUMA 2600Y Datum namestitve: 02/2023 Dodatna orodja: - Capto C3 raven nosilec: 2x - Capto C3 nosilec pod 90°: 1x - ER20 vpenjalna glava Capto: 10x - ER32 vpenjalna glava Capto: 4x Fodpfx Aoywllyscdjgf - Držalo Weldon Ø20 Capto: 1x - Capto stojalo za orodje: 1x - Indexabilni sveder: 1x Ø37 + 1x Ø19,5

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, stružna dolžina: 8.000 mm, premer struženja nad ležiščem sani: 2.000 mm, teža obdelovanca (maks.): 25.000 kg, premer struženja nad zgornjim sanežem: 1.550 mm, Premer struženja nad ležiščem Ø 2000 mm Premer struženja nad sani 1550 mm Dolžina struženja 8000 mm Premer izvrtine vretena 150 mm Moč vretena 95 kW Širina ležišča 1400 mm Pinola Ø 260 mm Hod pinole 200 mm Vpenjalo vretena Metric 80 Mk Teža obdelovanca 25000 kg Moč 95 A Hitrost vrtenja 360 obr/min Fgsdexxxbzepfx Acdjf Pomik X-os 0 - 6000 mm/min. Pomik Z-os 0 - 6000 mm/min. Prosimo, upoštevajte: Podatki na tej strani so bili po naših najboljših močeh in po potrebi dobljeni tudi od proizvajalca. Podatki so posredovani v dobri veri, natančnosti pa ni mogoče jamčiti. Zato ne predstavljajo zastopanja ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podatke.