Dts nakup rabljenega (144)

Stanje: zelo dobro (rabljeno), Blancheur Positienummer: LTC00006401 Merk: DTS Type: automatische volwater schroefblancheur met directe stoomverwarming Bouwjaar: 2004 Capaciteit: Ø = 800 mm x L = 3.660 mm Inhoud: ca. 1.800 liter Invoerhoogte: 1.650 mm Afmetingen (L x B x H): 4.850 x 1.950 x 1.800 mm Frame: roestvrij staal (RVS) Aansluitspanning: 400 Volt – 50 Hz – 3,0 kW Stoomdruk: 4 bar Uitvoering: - roestvrijstalen aanlandplaat - overloopscherm met opvangtank voor geblancheerd water - inclusief stoominjectie - temperatuur gestuurd - voorzien van circulatiepomp - mechanische motorreductor Deze blancheur is gekoppeld aan: Koeler Positienummer: LTC00006331 Merk: Lubot / Wakker Type: automatische schroefkoeler Bouwjaar: 2004 Capaciteit: Ø = 500 mm x L = 3.000 mm Inhoud: ca. 600 liter Hjdpfx Adohbvmuorefh Uitvoerhoogte: 850 mm Afmetingen (L x B x H): 3.900 x 1.000 x 1.800 mm Frame: roestvrij staal (RVS) Aansluitspanning: 400 Volt – 50 Hz – 0,55 kW Uitvoering: mechanische variator Levering: in huidige staat of getest en afgesteld naar klantwens

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, DTS Double Screw Blancher made of stainless steel Brand: DTS Year of manufacture: 2004 Power supply: 400 V Technical specifications: - Steam-heated system - Operating pressure: 6 bar - Screw dimensions: approx. Ø 1200 x 5000 mm - Water capacity: 1 x 4.41 m³ and 1 x 3.39 m³ Discharge conveyor: - Steel, dimensions: 4800 x 500 mm Total footprint: 8500 x 4300 mm Hsdpfxeyku D Do Adrsfh The device is offered without platform, stairs, or grating floor. The DTS double screw blancher set is an advanced processing unit entirely constructed from stainless steel, designed for thermal processing and conveying of food raw materials, particularly potatoes and root vegetables. Thanks to its high-pressure (6 bar) steam heating system and large operational capacity, the unit is ideal for blanching, scalding, or pre-processing in high-throughput production lines. The use of two independent large-diameter screws allows precise control over product retention time, ensuring consistently high processing quality while minimizing the risk of mechanical damage to the raw material.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 580 h, nosilnost: 250 kg, dvižna višina: 28.000 mm, vrsta goriva: dizel, Dvižna ploščad na tovornjaku Cela DT 28 Leto 2025 Delovna višina 28 m Stranski doseg roke 14 m Nosilnost košare 250 kg Košara za dvig materiala 250 kg Delovnih ur 580 prevoženih km 6.000 Avtomatska stabilizacija Hedpfx Adozdty Aerjfh Avtomatsko zapiranje roke Daljinsko upravljanje Fiat Iveco s klimatsko napravo Servisirana in v brezhibnem delovnem stanju

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 3.800 h, nosilnost: 230 kg, dvižna višina: 21.000 mm, vrsta goriva: dizel, ZRAČNA DELAVNA PLOŠČAD NA TOVORNJAKU Cela DT 21 Leto 2011 Delovna višina: 21 m Bočna doseg: 10 m Nosilnost košare: 200 kg Nosilnost kljuke: 230 kg Delovnih ur: 3.800 Prevoženih kilometrov: 78.800 Dvigalna kljuka Avtomatska stabilizacija Hedpfx Adezcvhbsrofh Servisirana in v popolnem delovnem stanju Odlične razmere Preverjeno s strani pooblaščenega servisa.

Stanje: rabljeno, lastna masa: 6.520 kg, največja dovoljena obremenitev: 23.480 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 8.610 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/140J, velikost zadnje pnevmatike: 235/75R17,5 ---/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Low-bed loading area length approx. 6.50 m, total loading area length approx. 8.60 m, loading height approx. 900 mm. Hfedpfjzb Dk Iex Adrjh This vehicle is being offered on behalf of a bank. -- Subject to typographical errors, mistakes, and changes. Sample images -- More data at: ! More details: !

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, skupna masa: 5.600 kg, skupna višina: 400 mm, skupna dolžina: 4.000 mm, skupna širina: 1.875 mm, T-utorna vpenjalna plošča UNION - DT Litoželezna talna plošča 4000 x 1900 x 400 mm MACH-ID 6444 Proizvajalec: UNION Tip: DT Leto izdelave: 1995 Dolžina: 4000 mm Širina: 1875 mm Višina: 400 mm Hfedozc Ihgjpfx Adreh Število T-utorov: 6 Razmik T-utorov: 315 mm Velikost T-utora: 36 mm Teža na ploščo približno: 5600 kg Število ustreznih kosov: 2 Dolžina: 4000 mm Širina: 1875 mm Višina: 400 mm Teža: 5600 kg Prosimo, upoštevajte: Informacije na tej strani so bile sestavljene po najboljšem vedenju in preverjene pri proizvajalcu, če je bilo mogoče. Informacije so podane v dobri veri, vendar za njihovo točnost ne moremo jamčiti. Zato ne predstavljajo pravnih zagotovil ali pogodbenih pogojev. Priporočamo, da sami preverite vse bistvene podrobnosti.

Stanje: zelo dobro (rabljeno), skupna masa: 14.000 kg, skupna višina: 455 mm, skupna dolžina: 5.500 mm, skupna širina: 2.420 mm, T utorna vpenjalna plošča STOLLE - DT-4/2 T utorna tlačna litoželezna plošča 4000 x 2420 x 455 mm Dolžina: 5500 mm Širina: 2420 mm Višina: 455 mm Število T-utorov: 6 Razmak T-utorov / korak: 400 mm Velikost T-utora: 42 mm Teža na ploščo cca.: 14000 kg Hfjdszc Ibmepfx Adrsh Število ustreznih kosov: 2 Dolžina: 5500 mm Širina: 2420 mm Višina: 455 mm Teža: 14000 kg Prosimo, upoštevajte: Informacije na tej strani smo zbrali po naših najboljših močeh in po možnosti od proizvajalca. Podatki so podani v dobri veri, vendar za njihovo točnost ne jamčimo. Zato ne predstavljajo nobene predstavitve ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, skupna masa: 4.200 kg, skupna višina: 350 mm, skupna dolžina: 3.500 mm, skupna širina: 1.750 mm, višina plošče: 350 mm, širina plošče: 1.750 mm, razmak utorov: 250 mm, T-utorna vpenjalna plošča STOLLE - DT MACH-ID 9373 Proizvajalec: STOLLE Tip: DT Hedpfx Aozcn Iyodrefh Leto izdelave: 1996 Dolžina: 3500 mm Širina: 1750 mm Višina: 350 mm Število T-utorov: 7 Razmik med T-utori: 250 mm Velikost T-utorov: 36 mm Teža na ploščo pribl.: 4200 kg Število ustreznih kosov: 4 Prosimo, upoštevajte: Podatki na tej strani so bili po naših najboljših močeh pridobljeni od nas in, če je bilo mogoče, od proizvajalca. Podatki so podani v dobri veri, vendar za njihovo točnost ne jamčimo. Zato ne predstavljajo nobene obveze ali pogodbenega pogoja. Priporočamo, da sami preverite vse pomembne podrobnosti.

Stanje: novo, lastna masa: 5.740 kg, največja dovoljena obremenitev: 24.260 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, barva: srebrn, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, rotacijska luč, 3 osi, SAF osi, vrtljiva prikolica, listno vzmetenje, ABS (protiblokirni sistem), razširljivo na 3 m, pritrdilne zanke, dvižne rampe 2-delne, mehanske rampe, izvlečna vlečna palica, stranska aluminijasta zaščita, dvojne pnevmatike, EBS Nadgradnja: tovorna dolžina cca 8,5 m, razširljivo na 3,05 m Hsdpfx Adoxbttqsrjfh Demonstracijsko vozilo! Parabolično vzmeteno z izravnavo osi zadaj, 3x 10t SAF osi, dovoljena skupna masa možna 30t, po dolžini nastavljiva vlečna palica. Novo vozilo iz zaloge s priložnostno registracijo na proizvajalca 21.07.2020! Podatki o dodatni opremi brez jamstva, spremembe, vmesna prodaja in napake pridržane!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33001012559, lastna masa: 6.250 kg, največja dovoljena obremenitev: 17.750 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.620 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 10.890 mm, skupna širina: 2.550 mm, skupna višina: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5", stanje pnevmatik: 100 odstotek, barva: črn, Chassis Low-bed Trailer: Steel welded construction, turntable with robust ball-bearing slewing ring, foldable rear support, 2 wheel chocks with holder, aluminum side underrun protection, splash guards at the rear across the full width (not compatible with forklift mounting), half-shell mudguards, 1st axle with anti-spray splash guards, anti-spray splash guards behind 2nd and 3rd axles, 1 plastic toolbox with shelving, W=620/H=360/D=440 mm, lockable with padlock, width extensions retractable to 3,000 mm, storage compartment for timber planks in the middle of the load bed, 70 mm timber planks for extension to 3,000 mm, lashing eyes for low-loader, 1 pair of lashing cutouts in the longitudinal beam at the front on the gooseneck recessed (each 10 t.), 4 pairs of lashing holes in the outer frame (each 5 t. load securing strap hooks), 7 pairs of lashing mushrooms, recessed at the top and sides of the outer frame (each 10 t.), 1x front on gooseneck, 6x in well-bed, first lashing eye 250 mm from the front and last a max. of 250 mm from the rear, spacing of the lashing eyes no greater than 1100 mm, 5 pairs of ring lashing eyes recessed in the outer frame (each 5 t., convertible to stake pockets), 2 pairs of additional folding lashing eyes (each 10 t.), 1x on gooseneck (protruding), 1x recessed in the floor behind the last axle, 1 pair of screw-in lashing eyes (each 6.7 t., JDT), with large flange plate incl. thread as counter-holder, at the front on gooseneck. Hodpfx Aezaznzjdrsfh Towing attachment for turntable trailer: drawbar with certified 40 mm towing eye, parking sockets for electrics/ABS and air connections on the drawbar. Axles & Suspension: SAF drum brake axles, 'axle/chassis laser alignment' for reduction of tire wear and fuel consumption, air suspension with raising & lowering valve, controllable separately for front and rear. Wheels and Tires: 235/75 R17.5" Fulda, rims: 6 x steel rims mounted inside in twin arrangement; 6 x polished aluminum rims mounted outside. Brake system: 2-line compressed air brake system, spring-loaded parking brake, trailer info center to display vehicle data such as axle load (not certified scales) and odometer, vehicle driving stability system, axle load detection via EBS CAN bus signal for display on truck cab screen (truck must be suitably pre-equipped), 2 fail-safe coupling heads at front with connecting lines to tractor unit, EBS, electronic braking system with EBS plug at front including connection cable. Electrics: 24 Volt, multi-chamber LED lights, side yellow LED lighting, license plate lighting in LED, make: Aspöck EcoLED 2 with dynamic indicator premium LED side marker lights, 2 front white position lights in LED, 2 rear white/red lane control lights in LED, 2 x 7-pin fail-safe plugs at the front with connection cable, additional LED work light at rear, 1 LED rotating beacon with bracket, switched via parking light, 2 pairs of LED-illuminated warning signs, extendable to 3,000 mm. Floor: front gooseneck section with steel/chequer plate covering, tool box recessed in the ramped transition to gooseneck, then with 70 mm Siberian larch wood flooring, wheel arch area with steel/chequer plate surface, rear ramp with 70 mm larch wood flooring, low-bed area including rear ramp 6,500 mm, drive-on ramps: steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, additional ramp securing bracket, foldable underneath (for lateral anti-slip - not in combination with hydraulic lateral ramp shift), with wood overlay, spring

Stanje: novo, Leto izdelave: 2021, dvižna višina: 6.000 mm, nosilnost: 10.000 kg, Ponujamo popolnoma nov, neuporabljen verižni dvigalo Delta SG.0.DTS.10002, letnik 2021. Nova cena: 15.000,00€ Proizvajalec: Delta Tip: SG.0.DTS.10002 Letnik: 2021 Hsdpfx Aey N Tpdodrjfh Stanje: novo Nosilnost: 10,0 t Če imate dodatna vprašanja ali potrebujete več informacij, nam pišite ali pokličite.

Stanje: rabljeno, konfiguracija osi: 3 osi, skupna širina: 25.500 mm, skupna višina: 35.000 mm, Leto izdelave: 2018, Oprema: ABS, = More options and equipment = - Rear air suspension - Front air suspension = Notes = For inquiries about the vehicle, Mr. Seidel (by phone) will be happy to assist you. Fliegl DTS 300 low-bed trailer BPW axles, drum brakes, spring-loaded brakes, mechanical ramps, permissible total weight: 24,000 kg, unladen weight: 6,350 kg, payload: 17,650 kg, loading dimensions: L 8,490 mm W 2,510 mm, tire tread: 1st axle 7-12 mm, 2nd axle 7-8 mm, 3rd axle 4-7 mm On request, we can provide you with a leasing or financing offer. Mr. Seidel (tel.) will be happy to assist you. Further information can be found on our homepage. ... Errors, changes, and prior sale excepted!!! = Further information = Unladen weight: 6,350 kg Payload: 17,650 kg GVW: 24,000 kg Hfedpfxjy Svrgs Adrjh Please contact Tobias Ebert for more information.

Stanje: dober (rabljeno), skupna dolžina: 4.000 mm, skupna širina: 2.000 mm, višina plošče: 295 mm, Manufacturer: STOLLE Model: DTS Year of manufacture: 1990 Specifications Metric | Imperial/US Standard Length: 4000 mm Width: 2000 mm Height: 295 mm Number of T-slots: 4 T-slot spacing / pitch: 400 mm T-slot size: 42 mm Weight per plate approx.: 6000 kg Dimensions (estimated) Length: 4000 mm Width: 2000 mm Height: 295 mm Weight: 6200 kg Hsdpfx Adewp E Ncsrsfh Please note: The information on this page has been compiled by us to the best of our knowledge and, where possible, obtained from the manufacturer. The details are provided in good faith, but their accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details independently.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, skupna masa: 8.200 kg, skupna višina: 450 mm, skupna dolžina: 5.370 mm, skupna širina: 2.100 mm, višina plošče: 450 mm, širina plošče: 2.100 mm, razmak utorov: 300 mm, Dolžina: 5370 mm Širina: 2100 mm Višina: 450 mm Število T-utorov: 7 Razmak med T-utori / korak: 300 mm Velikost T-utora: 41 mm Teža na ploščo cca: 8200 kg Hfodpjyg Igdsfx Adrsh Število ustreznih kosov: 1 Dolžina: 5370 mm Širina: 2100 mm Višina: 450 mm Teža: 8200 kg Prosimo, upoštevajte: Informacije na tej strani so bile pridobljene po naših najboljših močeh in, kjer je bilo mogoče, od proizvajalca. Podatki so podani v dobri veri, vendar natančnosti ni možno zagotoviti. Zato te informacije ne predstavljajo uradne ponudbe ali pogodbenih pogojev. Priporočamo vam, da preverite vse pomembne podrobnosti.

Stanje: dober (rabljeno), Leto izdelave: 2004, Number of T-slots: 8 + 3 Distance between T-slots: 280 mm T-slot size: 22 mm Number of matching items: 5 Length: 1250 mm Width: 750 mm Height: 2500 mm Hfodpjwu D Afjfx Adreh Weight: 2900 kg

Stanje: zelo dobro (rabljeno), skupna masa: 6.000 kg, skupna višina: 400 mm, skupna dolžina: 4.510 mm, skupna širina: 1.815 mm, višina plošče: 400 mm, širina plošče: 1.815 mm, Dolžina: 4510 mm Širina: 1815 mm Višina: 400 mm Število T-ut: 6 Razmak med T-utami / korak: 285 mm Velikost T-uta: 36 mm Teža na ploščo pribl.: 6000 kg Hjdpfx Ajyg Icrodrsfh Število ustreznih kosov: 1 Dolžina: 4510 mm Širina: 1815 mm Višina: 400 mm Teža: 6000 kg Prosimo, upoštevajte: Informacije na tej strani so bile po naših najboljših močeh zbrane s strani nas in, če je bilo mogoče, tudi od proizvajalca. Informacije so podane v dobri veri, vendar točnosti ni mogoče zagotoviti. Posledično to ne predstavlja nobene deklaracije ali pogodbene obveznosti. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2026, We are offering this used Exile SPYDER II DTS 30 machine for CTS (computer-to-screen) production of printing stencils for screen printing. THE MACHINE WAS RECENTLY SERVICED AND FUNDAMENTALLY REFURBISHED BY THE MANUFACTURER IN 04/2026: - NEW PRINT HEAD - HARDWARE AND SOFTWARE UPDATE (including a new board for print head control) - REPLACEMENT OF MINOR COMPONENTS (including vacuum regulator) Despite the 2021 manufacturing year, this SPYDER II is technically up to date with regard to all major components and delivers excellent and precise results. The print quality has significantly improved following the upgrade. In textile screen printing, we expose up to 60 LPI halftones, but the machine also processes finer test files with precision. The reason we are considering selling the machine at this time is our switch to a laser-to-screen unit. Model: SPYDER II DTS 30 Serial Number: 900-100560-MHM/120 Manufacture Date: 05/2021 Hfsdpfsy Itr Aex Adrsh Last service and upgrade: 04/2026 If you have any questions or require further information, please feel free to send us a message or give us a call. We are happy to provide videos and additional photos. On-site inspection is possible at any time. COLLECTION ONLY – ON SITE FLEXIBLE PAYMENT OPTIONS / INSTALLMENT PAYMENT POSSIBLE

Stanje: novo, številka stroja/vozila: 195f80ad09517628522e33a91, lastna masa: 7.300 kg, največja dovoljena obremenitev: 16.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Rear mudflaps across the entire width Quarter shell fenders in front of 1st axle 1st pair of wheel recesses embedded after the kink in the loading bed area, ramped entry, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the loading bed area, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The frame in the main beam area is 300 mm higher than the wheel recess. Sliding extensions for widening, extendable to 3,000 mm (not in tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Sliding extensions for widening, extendable to 3,000 mm, also at the bottom in the wheel recesses, foldable at the wheel recess extensions (extension not in the tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) 70 mm timber planks for extension to 3,000 mm Tie-down points on low loader 1 pair of lashing cutouts embedded in the longitudinal beam at the front in the kink, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for attaching tie-down straps) 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated at 10 t 1x at the front in the kink 6x in the loading bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points no greater than 1,100 mm Hodei Ri Rvjpfx Adrofh Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles & suspension SAF drum brake axles Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-applied parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, LED side marker lights, 2 white position lights at the front 2 white/red lane guidance lights at the rear 2 x 7-pin fail-safe connectors at the front, with connection cable, 1 LED rotating beacon with holder, switched via side light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Front kink with steel/checkered plate covering Storage box embedded in the ramp to the kink, then with 70 mm softwood floor, in the wheel arch area with steel/checkered plate covering Tail ramp with 70 mm softwood floor Low loading area including tail ramp: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring assist Operating Instructions For 10,000 kg axle load an exemption is required, only indivisible loads allowed! The stated gross weight is technically possible, but depending on the type of load, the gross weight may not be achievable within the pe

Stanje: novo, številka stroja/vozila: 2dff0c136c85096f36822a0bb, lastna masa: 7.150 kg, največja dovoljena obremenitev: 16.850 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis - Low-bed Trailer Steel welded construction Turntable with heavy-duty slewing ring, storage box integrated into turntable front section Hfedpfxji Riy Ee Adrsh Foldable rear supports 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflaps Extendable extensions to 3,000 mm (not at the rear bevel) (Note: The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Central storage compartment for timber boards on the loading platform 70 mm timber boards for extension to 3,000 mm Low-bed lashing rings 3 pairs of 10 t lashing points integrated into the front floor 6 pairs of 10 t lashing mushrooms recessed in the top and side of the outer frame 1 x by the neck area The remaining points are distributed at no more than 1200 mm intervals 1 x at the rear bevel 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (can be converted to 5 t ring lashing eyes, not included) Drawbar Turntable Trailer Coupling Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical Axle load equalisation (rocker balancing) Brake System 2-line compressed air brake system Coloured line routing for easy service Spring-loaded parking brake included 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connecting cable Note: The trailer may only be towed by vehicles ensuring the proper function of ABS! Wheels and Tyres 235/75 R 17.5 Manufacturer’s choice Steel twin wheels, factory silver finish Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with holder, switched via parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, followed by 70 mm softwood flooring; wheel arch covers in steel/chequer plate Rear bevel with 70 mm softwood flooring Low-bed area incl. rear bevel 8,200 mm Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered, included With spring assist Operating Notes An exemption permit is required for 10,000 kg axle load—only indivisible loads allowed! The specified total weight is technically achievable, but depending on the load, the permissible total weight may not be reached due to axle/support/kingpin limits. (Poor driving and tracking may result from incorrect load distribution) Country of Registration/Plates Country of registration: Germany With Dekra inspection and appraisal (according to §13 EU-FGV) 24/7 service hotline Prepared for double-line license plate holder Contour marking with reflective stripes per ECE R 048, white to the side, red to the rear Paintwork Frame DB 7350 Novagrau 10-year guarantee against rust-through Drawbar galvanized or black, manufacturer's choice Access ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Trailer Steel welded construction 1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note! Frame is 400 mm higher in the main beam area than at the wheel recess. If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side. Turntable with robust ball race ring, storage box integrated in the turntable front section Rear supports foldable 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extending wideners to 3,000 mm (not in rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Central storage compartment for wooden planks on loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes low-loader 3 pairs of 10 t lashing points integrated in the floor at the front incl. 6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t 1 x at the gooseneck The remaining distributed between, spacing not greater than 1,200 mm 1 x rear bevel 5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly trailer turntable Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser aligned to reduce tyre and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colour-coded piping for easy service Spring loaded parking brake Hsdpfxji Ri Ryj Adrjfh 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by tractor units which ensure the functionality of ABS! Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin interchange-proof plugs at front with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm Floor Front area steel floor, incl. Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel 8,200 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lifting aid Operating instructions For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany incl. With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for two-line number pla

Stanje: novo, številka stroja/vozila: d461243f559015adca5bb372c, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: W=620/H=360/D=440 mm, lockable with a padlock Extendable width up to 3,000 mm Central storage compartment for timber planks on loading area 70 mm timber planks for widening to 3,000 mm Lashing rings for low-bed (40 lashing points) 1 pair of lashing apertures recessed in the front longitudinal beam at the gooseneck, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for lashing strap hooks) 7 pairs of lashing mushrooms embedded on top and side of the outer frame, each rated for 10 t 1 at the front on the gooseneck 6 in the low-bed section First lashing ring 250 mm from the front, last max. 250 mm from the rear, spacing between lashing rings not greater than 1,100 mm 5 pairs of stake pockets embedded in the external frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes) 2 pairs of additional folding lashing eyes, each rated for 10 t 1 on the gooseneck (protruding) 1 recessed behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and tyres 235/75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line pneumatic braking system Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connecting lines to towing vehicle ABS and ALB, ABS connector at the front with connecting cable Brand: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 LED beacon with bracket, controlled via parking lights (removable beacon) 2 pairs of warning boards, double, LED illuminated, extendable to 3,000 mm Floor Gooseneck front with steel tread plate covering Storage box recessed in the transition to the gooseneck Followed by 70 mm softwood flooring, wheel arch areas with steel tread plate covering Rear chamfer with 70 mm softwood flooring Low-bed area incl. rear chamfer: 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber-layered Hydraulically operated via tractor PTO with throttle, operated from left-hand side, front Hydraulic connection with SVK coupling NW 10/3, including connecting hose Country of registration / Plates Country of registration: Germany 24/7 service hotline Hsdpei Ri Dlsfx Adrsfh Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning board according to ECE - 70 Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Note: These are archive images!

Stanje: novo, številka stroja/vozila: 628cde0fe99cc2d3c8eaa8dd8, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flap Half-shell mudguards on 1st axle with anti-spray flaps, anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for extension to 3,000 mm Tie-down lugs for low loader (40 lashing points) 1 pair of lashing cut-outs in the longitudinal beam at the front, recessed into the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for securing with lashing straps) 7 pairs of lashing mushrooms, recessed at the top and side of the outer frame, each rated at 10 t 1 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front, last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, interior dimensions 70 x 40 mm (convertible to 5 t ring lashing points, not included) 2 additional pairs of folding lashing rings, each rated at 10 t 1 on the gooseneck (protruding) 1 behind the last axle, recessed in the floor Towing Device Turntable Trailer Drawbar with certified 40 mm towing eye Axles and Suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front and connecting cable Manufacturer: Wabco or Knorr Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with bracket, switched with parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/chequer plate covering Hjdpfx Adoi Ri Ddorsfh Toolbox recessed into transition slope to gooseneck Following area with 70 mm softwood floor, steel/chequer plate in wheel arch area Rear taper with 70 mm softwood floor Low-loader deck including rear taper: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surfaced With spring lift assistance Country of Registration / License Plates Country of registration: Germany 24/7-Service Hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Warning sign according to ECE-70 Painting Frame hot-dip galvanized including passivation 15 years’ warranty against corrosion perforation Drawbar galvanized or black, manufacturer’s choice Loading ramps hot-dip galvanized Attention! Archive images shown!

Stanje: novo, številka stroja/vozila: f8fb99947a1c19bc4d63549ff, lastna masa: 6 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 24 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Rear foldable support 2 wheel chocks with holders Side underrun protection in aluminium Full-width rear mudflap Half-shell mudguards on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox with shelf, dimensions: width 620 mm, height 360 mm, depth 440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm (not at rear slope) (track width of machines or vehicles to be transported must not exceed external frame width of 2,550 mm) Central storage compartment for timber planks on the loading platform 70 mm timber planks for widening to 3,000 mm Tie-down eyes for low-loader: Hjdsi Riwfspfx Adrjfh 1 pair of flush-mounted ring lashing eyes at the front on the swan neck, each rated at 5t 7 pairs of lashing mushroom pins, recessed on top and sides of outer frame, each rated at 10t 1x front on swan neck 6x in low bed area First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5t ring lashing eyes, not included) 2 additional pairs of foldable lashing eyes, each rated at 10t 1x on swan neck (protruding) 1x behind the last axle, recessed in the floor Drawbar assembly for turntable trailer: Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic springs with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels and Tyres 235/75 R 17.5 Manufacturer's choice, with M&S marking Steel rims in twin arrangement, factory silver finish Braking System 2-line compressed air braking system Spring-actuated parking brake 2 foolproof coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS socket at the front and connecting cable Brand: Wabco or Knorr Note: The trailer may only be towed by vehicles that ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane departure lights at the rear 2x 7-pin foolproof plugs at the front with connecting cable 1 LED beacon with bracket, switched via parking lights (lamp removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Floor Front swan neck with steel chequer plate covering Storage box recessed in the approach slope to the swan neck Then 70 mm softwood flooring, in wheel arch area with steel chequer plate Rear slope with 70 mm softwood flooring Low-bed area incl. rear slope 6,500 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety device, foldable at the bottom (prevents lateral displacement of ramps, not in combination with laterally hydraulic ramp adjustment) Wooden covering Spring-assisted lifting support Operating Instructions At 10,000 kg axle load, a special permit is required, only indivisible loads allowed! The specified total weight is technically possible, but depending on the cargo, the total weight may not be achievable while complying with the permissible axle, support, and king pin loads (poor handling or tracking may result from incorrect load distribution) Country of Registration / Pla

Stanje: rabljeno, Leto izdelave: 2007, Labotek dry air dryer DMD/DT 25/40, 40 liters, year 2007 + conveyor + mixing switch Price: €3,450.00 Hfsdpfx Ajtzmuhodrjh Contact person: Mr. Rainer Eckerle

Stanje: dober (rabljeno), Leto izdelave: 2007, Labotec dry air dryer DMD/DT 25/40, 40 liters, year 2007, incl. conveyor Price: €3,450.00 Contact: Mr. Rainer Eckerle Hfjdpfov Rcwzsx Adrsh