Dts nakup rabljenega (133)

Stanje: zelo dobro (rabljeno), Double-sided EDGE BANDING AND FORMATTING MACHINE (First machine in a production line) Edge material (coils) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Nedpfx Adjt N Ix Rsvocp Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection: Enclosed cabin Side adjustment of aggregate carrier: manual FORMATTING PROCESSING (for each side): 2 x Hogging unit DT 10 (Kw 5.8 x 2) Free slot for jointing milling unit FS Jointing milling unit ES30 + ER30 (Kw 5 x 2) 0° - 90° Universal milling unit softforming SF 10 (2 x Kw 2.4) 0° - 45° Spraying unit (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): Gluing unit (Hot melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Pre-heating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions) mm 800 (Guillotine CI10+CS10+RL10) - Edge magazine for coils (No. 6 compartments) Milling unit RS 10 (Kw 1.3 x 2) Milling unit softforming RF 10 / SF (Kw 0.65 x 2) Multi-profile milling unit RF 30 (Kw 0.65 x 2) Universal milling unit for grooving/rebating and profiling FB 30 (Kw 4.5 x 2) 0 - 90° Multi-profile scraper blade unit RB 30 Flat scraper blade unit RC 05 / Soft Spray aggregates (for polishing fluid) + Buffing unit SZ 30 (Kw 0.37 x 2)

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in one line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / Software SINITRA Feed Speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW), pneumatic 2 x hogging units DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): 1st Gluing Unit (hot-melt adhesive + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing Unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min. 0 – 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (1 x 2 kW) 0 – 25° Nodeu Rc Anspfx Advocp Multipurpose unit (radius and profile milling unit) AR 80 (0.65 kW x 2) 25 m/min ROTAX. 8+8 position turret (max. 25 m/min) Motors with automatic tool change (tools) Multi-profile scraper unit (CNC controlled) RB 40 (multi-profile) Flat scraper unit RC 20 + spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided – First machine in a production line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Ncedpfxou Rc Hyo Advep Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 100 / 1200 Control: PC-based, Windows / PC software / SINTRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER CNC) EDGING PROCESSING (for each side): Spray unit (for liquid non-stick agent) No. 2 hoggers DT 10 (5.8 kW x 2) Free space EDGEBANDING UNIT (for each side): 1st gluing station (hot melt + pre-melter) SP 30 (high melt + Edge Control EC 40) 2nd gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled) + edge magazine for rolls (no. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (2 x 1 kW) 0°–25° No. 1 universal routing unit for grooving/rebating/profiling EB 60 (1 x 5 kW) – ISO 30 motor Multi-profile scraper unit (CNC-controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Stanje: rabljeno, Wire electrode, welding wire, welding wire - Manufacturer: Böhler, partially used spool of MAG wire electrode - Type: DT 1.4829 AWS: ER 309 Ø 1.2 mm - Dimensions: Ø 300 / 100 mm - Spool weight: 12.8 kg Ncjdpefu Trkjfx Advjp

Stanje: rabljeno, Transformer, Trafo, Converter, Three-phase Autotransformer, Three-phase Transformer -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300 VA -Primary: 3x380 V Ncodpfxekzpm Ho Advjp -Technical data: see nameplate photo -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Leto izdelave: 1999, stanje: dober (rabljeno), Granulate dryer, compressed air dryer, continuous dryer, granulate drying system - Manufacturer: digicolor, Granulate dryer type Dehumidifying Dryer - Model: DT 204 M - Power: 10,000 W - Side channel blower: Siemens Elmo-G 1.5 kW - Individual components: see photos - Dimensions: 1020/610/H1550 mm Ncedpfx Adslb Iv Njvjp - Weight: 241 kg

Stanje: rabljeno, Leto izdelave: 2008, Proizvajalec: VMI Model: R 401 DT Leto: 2008 Uporaba: mešanje in gnetenje zelo viskoznih ali pastoznih izdelkov Posodi: 2 Prostornina: 40 litrov Moč: 3 kW Mešalna enota: 1 metlica / 1 strgalo Ncodpox R Dz Hefx Advjp Dvig in spust: hidravličen

Stanje: zelo dobro (rabljeno), Geared Motor Eurodrive (28450) Type: FA 37 B Model: DT 71D4 BMG MM 03 Power: 0.37 kW Speed: 15–73 rpm (n1/min) Transport dimensions: Length: 390 mm Width: 350 mm Height: 180 mm Ncedpsrc Dkxofx Advsp Weight: 25 kg

Stanje: kot nova (razstavni stroj), obratovalne ure: 50 h, Uhlmann Thermoform Packaging System UPS 4 ETX for processing PVC forming film and aluminum lidding foil Base machine with modular technology and balcony design, consisting of 12 modules: - Forming film unwinding unit with 2 pneumatic expanding shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and splicing table for forming film - Intermittent forming film unwinding - 3-zone contact heater: - 6 heating circuits, individually controllable - simultaneous heating of at least 3 advances - heating plates open automatically when machine stops - Forming station with 4-column lift table guidance - Filling section, length 1,360 mm - Safety cover in filling area Lidding foil unwind on operator side with pneumatic expanding shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4-column lift table guidance: - integrated overload protection - automatic lifting of the upper sealing tool when machine stops - Free module for installation of an additional station - Indexing chain feeder - Punching station with blister lowering - Waste cutter with integrated motor-driven transport of the punching grid - Smoothing device - Perforation station ET/DT - Monitoring of compressed air supply with machine stop if minimum value is not reached - Visio Scan - electrically interlocked safety doors - Fast format change due to: - plug-in format parts - quick-connect couplings for cooling water supply - Main drive with frequency-controlled three-phase geared motor - Control cabinet at machine rear, swing-mounted Operating control Paccontrol - 10.4" TFT color display, resolution 640x480 pixels - Processor 68C030 - Operating system OS9 2.9 - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Programmable logic controller in modular design: - B&R PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - external program memory Technical Data UPS 4 ETX: - Cycles: - ET area: min./max.: 15/50 cycles/min. depending on film quality, feeding, and format design - Format range: min./max. advance in filling area: 64/226 mm min./max. film width: 100/300 mm min./max. punching width: 28/284 mm max. forming depth: 12 mm - Compressed air: - Input pressure: approx. 6 – 8 bar 4 Simtap feeders Ncedjtndpzjpfx Advjp

Stanje: zelo dobro (rabljeno), Here we offer a used Datona Mobile Sandblasting Unit. Datona Mobile Sandblasting Unit DUO - 74 Liter SKU DT-55212 Pros and Cons: - 2.5 m long hose for extended range - Easy switching between blasting media thanks to the mixing valve - When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting unit is used for removing paint and rust. Thanks to the two tanks, you can choose between two different blasting media. The mobile sandblaster operates with a pressure of 4 to 8 bar and requires a compressor with a minimum intake capacity of 350 l/min. Dual Tank: If blasting with soda or calcium carbonate does not achieve the desired result, simply switch to a different blasting medium. For a more effective operation, it is also possible to use both media at the same time. With this sandblasting unit, you get a practical machine for your workshop. With the special mixing valve you can gently and easily remove paint from steel, stainless steel, chrome, aluminium, or polyester using soda. A major advantage of blasting with fine soda is that the surface of the object being blasted is not damaged. You do not even need to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop and on-site. Please note: One of the tanks is exclusively suitable for soda and calcium carbonate! ✓ Duo sandblasting unit ✓ 74 litre tank capacity ✓ Air consumption approx. 350 l/min Technical data: SKU: DT-55212 Weight: 33 kg Suitable blasting media: - Aluminium silicate - Dato-Blast calcium carbonate - Soda Blasting cabinet connection: 1/4" Max. pressure: 2 – 6 bar Minimum air consumption: 350 l/min Minimum compressor tank capacity: 100 litres Type: DT-55212 Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) Nsdeqcuvwjpfx Advecp For further questions, please do not hesitate to contact us by phone.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 6.000 kg, dvižna višina: 30.000 mm, vrsta goriva: dizel, tip droga: teleskopski, dolžina vilic: 1.200 mm, vrsta pogona: Diesel, Rotating telehandler Mast type: Telescopic Technical Condition: New Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 80 - 100% Description: The machine is UVV-inspected (Occupational Safety Check). Nodpew Eqdwefx Advscp A&M pallet fork carrier set including 1,200 mm pallet forks, 1,500 mm pallet fork carriage plate, and 5 t lifting hook. 3rd control valve, 4th control valve, heater, road homologation (STVZO), fully enclosed cab, CE certificate. PEGASUS 60.30 St.V, TÜV/Dekra certification, 20 km/h, Axles for construction machines with automatic 45% differential lock on the second axle, additional platforms for stabilizers, pair of LED headlights on the fixed boom, 7-pin socket on the upper carriage, radio pre-installation set with antenna and speakers, standard tool carrier plates, mechanically suspended Grammer seat with double joystick (right joystick with integrated FNR), electrical pre-installation for 3-function attachments, set of 18R22.5 XF MICHELIN off-road tyres, semi-automatic climate control system, removable front windshield guard for the cab, kit for operating with 180° upper carriage rotation, boom oscillation damping, integrated rear-view camera with 7" display (not compatible with the 7" monitor with digital camera on the telescopic boom), telematics kit (DTS), road headlights (front) with LED daytime running lights, cab with laminated safety glass windshield, Woodcracker saw pre-installation, three-sided work platform 120 x 240 cm, hydraulically extendable to 420 cm, load capacity 300 kg, pallet fork carriage plate including A&M lifting hook, width FEM 4A, forks: 150 x 50 mm, 1.2 m length, load capacity.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, vrsta upravljanja: CNC krmiljenje, proizvajalec krmilnikov: Durma, model krmilnika: DT-5, frekvenca hodov (min.): 14 obr/min, najv. debelina pločevine: 6 mm, zadnji prislon: 1.020 mm, Oprema: CE označba, dokumentacija / priročnik, kotni ventil, nožno daljinsko upravljanje, nujno zaustavitev, varnostna svetlobna zapora, zaščita prstov, ES3006 in stock - Cutting length: 3100 mm - Capacity: 6 mm steel - Control: DT-5 Nodpfx Aowtl Awodvocp - CNC back gauge: 1000 mm - Cutting length limitation - Easy operation - Retract function - Pneumatic sheet holder

Stanje: novo, Condition: New Ncjdpeh H Dnbjfx Advop Press force: 175 tons Bending length: 3050 mm Axes: Y1 / Y2 and X axis Control system: Durma Sky 22 Rapid traverse (Y axis): 200 mm/s Stroke: 265 mm Distance between uprights: 2600 mm Throat depth (side frame): 450 mm Installation height: 530 mm Drive concept: Servo-hydraulic, up to 72% energy savings Working speed (Y axis): 10 mm/s Return speed (Y axis): 500 mm/s Backgauge travel (X axis): 650 mm Backgauge speed (X axis): 500 mm/s Backgauge speed (R axis): 350 mm/s Backgauge travel (R axis): 250 mm Table height: 900 mm Table width: 104 mm Motor power: 15 kW Length: 4250 mm Width: 1700 mm Height: 2890 mm Weight: 10,900 kg 3 axes (Y1, Y2, X) CNC CONTROL DT-15 - 15" 2D graphical display - Intuitive touchscreen operation (easy drawing of the bending contour with your finger) - Direct programming of the bending angle - User-friendly dialog programming - Graphical simulation of the bending process - Automatic calculation of the developed length for sheet metal blanking - Graphical product and tool library - Correction function - Manual, semi-automatic and fully automatic operating modes - Tonnage calculation/programming via CNC - Internal data storage - USB ports for backup and program export Servo-motor-driven backgauge on linear guides and ball screw spindles Backgauge finger blocks on double linear guides CNC-controlled crowning Adapter pieces for top tool clamping Die holder for 60 mm dies Fiessler AKAS laser safety system mounted on upper beam Sheet support arms on linear guides Side and rear safety guards Equipment according to CE regulations Operating manual in GERMAN and ENGLISH (Symbolic image) Various options and equipment configurations available.

Stanje: dober (rabljeno), Transformer, transformer (abbreviated: trafo), converter, three-phase autotransformer, three-phase transformer, single-phase transformer, three-phase isolation transformer Nsdpen Nzh Tjfx Advscp -Manufacturer: Strobelt, single-phase transformer type DT-00104 -Power rating: 2500 VA -Technical data: see nameplate photo -Dimensions: 260/140/H230 mm -Weight: 30.2 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 02/7467-70, skupna višina: 6.000 mm, število vrst polic: 8, višina police: 300 mm, število podajalnih pladnjev: 18.500, Used high-bay warehouse, type "Automated Small Parts Warehouse (AKL)" Height (frame): 6 m, depth 700 m, bay width 1.5 m, 14 levels high, approx. 18,500 pallet spaces, bay load ? kg, shelf load 3x? kg, total length approx. 400 m. Scope of supply: Racking system, 4x Viaspeed S2-RZF DT shuttle units, 1 storage and retrieval machine (SRM/RBG), 18,500 small load carriers (KLT containers) 600 mm x 400 mm x 270 mm. The racking is in operation until approx. 31.3.26. Required floor space in our facility: 51 m x 18 m x 6 m height. There are 8 racks supplied by 4 shuttle carriages. Good condition, low to very low usage, in part never used. Already dismantled. Sale of the entire racking system preferred. In case of partial bids, rack segments of approx. 51 m must be taken. The buyer is required to purchase the central control system (storage and retrieval machine/SRM) separately from the supplier and to arrange for its installation and commissioning. Please inform us of your offer price. Sale only within Europe (EU), Turkey, United Kingdom, and Switzerland. The German version of this text is legally binding. ----- Njdjxqrbljpfx Advocp Technical data and parts list: see attached document. No packaging; any warranty or guarantee is excluded. If you intend to dismantle the system yourself, please indicate this in your offer. No liability is assumed for the accuracy of the technical data, the completeness of accessories and tools, nor for compliance with any safety or environmental requirements as specified by accident prevention regulations.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 2514070/0200/2007/15128743/1, Rabljeni izparilnik GEA KÜBA, tip CA.E.06-1X1F, serijska številka 2514070/0200/2007/15128743/1 Ncedpfx Adoip Utajvep Letnik proizvodnje: 2007 Ohišje: Samonosilna konstrukcija, posamezni ventilatorski oddelki. Ventilator izjemno tih (E). Ohišje in noge iz pocinkanega jekla, prašno barvano, odporno na temperature in UV-sevanje, v RAL 7032 prodnato sivi barvi. Dvigalni nosilci v standardni opremi. Izmenjevalnik toplote: Standardna razporeditev cevi vzdolžno, zamaknjene, iz posebnega bakra. Cevi: Ripple Fin, SF-Cu; lamele: visokozmogljive aluminijaste lamele z aluminijastimi čepi za večji prenos toplote. Razmak lamel: 2,2 mm. Možna izvedba z več krogi. Priključki za tekočino: Spajkani bakreni priključki, navpični (uporaba pri navpičnem ali vodoravnem pretoku zraka). 3. Aksialni ventilatorji: Kompaktna enota brez zunanjega pritiska, odporna proti koroziji in vremenskim vplivom: Motor z ventilatorji, zaščitna mreža po DIN 31001/24167 in montažni nosilci. Ventilatorska krila ø 650 mm, balansirana po dvostopenjskem postopku v skladu z VDI 2060. Motorji: trifazni tok 400±10%V, 50 Hz, 2 hitrosti, ∆-Y-priklop, zaščita: ø 650, IP66; spremenljivo število vrtljajev s krmiljenjem napetosti. Odporno na frekvenčne spremembe (največji naklon napetosti ventilatorja dU/dt=500V/µs). Standardna zaščita motorja s termočleni. Za zunanjo namestitev in okoljsko temperaturo motorja od -30°C do +60°C. CA. 05 – 06 • 400V±10%V-3 s spremembo vrtljajev ∆-Y-preklop • Zaščita CA.06: IP66 • Območje uporabe: –30°C do +60°C • 230V±10%V-1 na zahtevo Največje dovoljeno število zagonov je 60 na uro. Ventilatorski motorji morajo delovati vsaj dve uri mesečno. Drugi motorji lahko spreminjajo moč in zvočni tlak. Standardni ventilatorji so priporočeni za uporabo s frekvenčniki z: • uro

Leto izdelave: 2018, stanje: rabljeno, Dvostranski hladilnik Guntner -Tip: S-GBK 050.2B/47-EW.E -Hladilna moč: 40 kW pri ΔT 10K (0°C), 35 kW pri ΔT 9K (-2°C) -Razmak lamel: 7 mm -Število ventilatorjev: 4 x 500 mm -Dimetrije naprave: 5500 x 1100 x 660 mm -Ohišje in blok iz nerjavečega jekla -Električni grelci -Leto izdelave: 2018 -Kapaciteta: 37,4 L -Stanje zaloge: 1 kos -Skladiščna številka: CH 574 Nedpfx Aoxpuv Asdvecp -Stanje: rabljeno, zelo dobro, hladilnik 100% tesen, ventilatorji delujejo, pripravljeno za uporabo

Stanje: rabljeno, Leto izdelave: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Max. clearance between columns: 3,000 mm Max. passage height: 1,950 mm Max. distance spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Type P 8002320/00-4 Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Nedpovy Ihdofx Advocp Table clamping area: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool pockets: 327 positions Number of tool pockets HSK A63: 156 positions Number of tool pockets HSK A100: 171 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total power requirement: 150 kVA Required space approx. 25.0 x 12.0 x 7.0 m 5-axis portal large machining center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - Approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools upon agreement

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, pomik po osi Z: 500 mm, Rondcom 54-SD3 / ACCTEE PRO Form tester based on a steel device platform, including air-bearing, high-precision CNC rotary table and motorized Z-axis column (Z=500 mm), comprising: Measuring unit E-RT-R531A Detector holder E-DT-R749A Stylus arm EM46000-S302 (diameter 1.6 mm) Detector E-DT-R120A Controller PCB for PC operation, interface controller Base software ACCTee PRO Roundness under MS WIN XP/7 Calibration sphere E-MG-R01A (roundness 0.05 μm) Tool set/gauge block set with factory certificate (1.47 mm and 1.49 mm) Fuse (1A), operating manual, device inspection certificate CNC probe holder with extension height H = 153 mm; extension depth T = 65 mm; suitable for R44/54 SD/DX with detector E-DT-R120A Accretech description: E-DH-R770B Z220 HP Workstation G1 - HP Single Unit (CMT) Packaging - HP Z220 CMT 400W 90% efficient chassis - Windows 7 Prof. 32/64bit OS Ncjdpfx Asx Sckpjdvsp - Intel Core i3-2120 3.3 3M 2C GT1 CPU - 4GB DDR3-1600 ECC (2x2GB) RAM - 500GB 7200 RPM SATA 6G 2nd HDD - ATI V4800, 1GB RAM - Network interface - 16X SuperMulti DVDRW SATA 1st ODD 29-piece stylus set for Rondcom Three-jaw chuck E-WJ-R01C FX base frame comfort version Rondcom 44/54 Table dimensions 1076x1076x810 mm consisting of: Closed base frame, with 4 mounting points for air springs, Steel base frame, color RAL 7035 Integrated granite plate 1000x630x100 mm All wooden elements melamine resin-coated graphite black 3x side and rear covering panels 1x large wooden shelf with square cutout + 1x insert shelf Intermediate wooden base 2x front wooden doors + additional adapter plates to allow for increased load capacity (due to heavy Z-column) 1x monitor mount consisting of column and folding arm Integrated air spring system 4x membrane air springs BiAir 0.25-ED-LT, (own frequency vertically approx. 2.5Hz) Load capacity at 6 bar: 170 kg 4x GDR 0.25-LT 1x mechanical-pneumatic leveling control MPN-LCV, resetting accuracy ±0.1 mm, 1x compressed air maintenance unit WFD-M, 4x leveling elements BNRS 70/4, (leveling range 750 mm +/-30 mm possible) 4x leveling screws M16 x 100 mm 1x complete installation of wooden cladding elements

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, številka stroja/vozila: 1140165, Funkcionalnost: popolnoma funkcionalen, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Control: Haas Spindle taper: CT 40 Further auctions from the same location: EBU E 35 Search ID=19074266 Exner H4SP-200 Search ID=19074391 HAAS DM-2 Search ID=19074331 HAAS DT-1 Search ID=19074411 Hans Schoen SH 200 Search ID=19074426 Mora Primus 7107 V3 Search ID=19074526 Rapid DGL 250 Search ID=19074421 Hans Schoen SH 16 Search ID=19074441 SW Schwäbische Werkzeugmaschinen BA 312 V3 Search ID=19074456 SW Schwäbische Werkzeugmaschinen BAS 03-11 Search ID=19074466 EQUIPMENT - Tool changer - Chip conveyor - Swivel axis Further specifications as per manufacturer – without guarantee Travels X / Y / Z: 711 x 406 x 394 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Table size: 864 x 381 mm T-slot spacing: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of T-slots: 3 Table load: max. 113 kg Ncsdpjwqcqtjfx Advep Tool changer: Double gripper Tool diameter: 64 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 18+1 Machine dimensions: approx. 2.8 x 2.2 x 2.6 m Transport dimensions: approx. 2.6 x 2.3 x 2.5 m Transport weight: approx. 2.5 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, številka stroja/vozila: 1127626, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 600 mm, širina mize: 400 mm, Oprema: transportni trak za ostružke, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Table size: 400 x 600 mm EQUIPMENT - Chip conveyor - Tool changer Other auctions from the same location: EBU E 35 Search ID=19074266 Exner H4SP-200 Search ID=19074391 HAAS DM-2 Search ID=19074331 HAAS DT-1 Search ID=19074411 Hans Schoen SH 200 Search ID=19074426 Mora Primus 7107 V3 Search ID=19074526 Rapid DGL 250 Search ID=19074421 Hans Schoen SH 16 Search ID=19074441 SW Schwäbische Werkzeugmaschinen BA 312 V3 Search ID=19074456 SW Schwäbische Werkzeugmaschinen BAS 03-11 Search ID=19074466 Additional information according to manufacturer specification – without guarantee X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Ncodjwqcqyspfx Advjp Tool taper: BT 30 T-slot spacing: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of T-slots: 3 Table load: max. 113 kg Tool changer: Double gripper Tool diameter: 51 mm Tool length: 178 mm Tool weight: 2.5 kg Tool slots: 20+1 Machine dimensions: approx. 2.6 x 1.7 x 2.6 m Machine dimensions for transport: 2.5 x 2.0 x 2.5 m Weight: approx. 2,400 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, obratovalne ure: 4.534 h, nosilnost: 2.000 kg, dvižna višina: 2.500 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 1.300 mm, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are fully refurbished in accordance with FEM 4.004 and the latest safety standards – ensuring maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection Ncjdswzwcrepfx Advep ✔ 400+ units available ✔ Worldwide shipping & customs handling ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test on-site now and receive expert advice – we’ll find the right solution for you. Industrial Truck Data Manufacturer: Jungheinrich Model: Li 119-250 DT – Pedestrian High-Lift Pallet Truck Drive Type: Electric Load capacity: 2,000 kg Lift height: 2,500 mm Load center: 600 mm Year of manufacture: 2017 Operating hours: 4,534 hours Mast type: Triplex Fork length: 1,200 mm Overall height: 1,300 mm Own weight: 950 kg Battery voltage: 48 V C5 Capacity Test: 24V 375Ah (test report supplied upon delivery) Charger voltage: 48 V (on request) Attachments: Special equipment: Tyres front: Polyurethane Tyres rear: Polyurethane

Stanje: rabljeno, Welding positioner ESS Type DT 50 Serial No. 86 / 1125 Year of manufacture 1986 Max. load capacity: 50 kg Table (chuck) diameter: 300 mm Table rotation speed: 0.19 to 5.7 rpm Control voltage: 24 Volt Motor output: 100 Watt Power supply: 220 Volt, 50 Hz - Table (chuck) steplessly tiltable by 180° - Speed control via rotary potentiometer Ncedperwq Urofx Advep - Forward and reverse operation - Foot switch - 2-stroke and 4-stroke operation - Slip ring contact for ground up to 200 Amp - New ESS PS3 controller from year 2009 Space requirements (L x W x H): 600 x 500 x 350 mm Weight: 45 kg In very good condition

Stanje: novo, Leto izdelave: 2025, Ref.-No.: 10461 Manufacturer: IGREK Model: DT 4000 Year of manufacture: 2025 Control type: CNC Controller: SIEMENS SINUMERIK 840D SL Location: Istanbul Country of origin: Türkiye Spindle speeds: 4,000 rpm Swing height: 2,000 mm Table diameter: 4,000 mm Spindle power: 37 kW Max. table load: 40 t Table rotation speed: 60 rpm Max. turning diameter: 5,000 mm Max. turning height above faceplate: 2,000 mm Max. spindle torque: 1,200 Nm Spindle mount: ISO 50 Machine length: 7,500 mm Machine width: 12,000 mm Machine height: 9,500 mm Approx. machine weight: 125 t Additional information: RAM stroke: 2,100 mm RAM cross-section: 350 x 350 mm Vertical travel of movable crossrail: 2,000 mm Table drive system: Segmented direct drive motors Table torque: 8,200 Nm – 14,400 Nm max. Table guidance system: Hydrostatic bearings and guides Njdsxmd Sujpfx Advecp IGREK DT 4000 – Your Solution for Precision Heavy-Duty Machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning lathe, specifically designed for the precise machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable crossrail, it enables efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key features: Hydrostatic rotary table: The 4,000 mm table with hydrostatic bearings ensures maximum precision and smooth operation when machining heavy workpieces. Movable crossrail: The vertically adjustable crossrail with a stroke of 2,000 mm offers flexibility and allows adaptation to different workpiece heights. Powerful spindle: With a spindle speed of up to 4,000 rpm and a power output of 37 kW, the machine is designed for demanding machining operations. High load capacity: The rotary table accommodates workpieces weighing up to 40 tons, enabling the machining of large and heavy components. Multifunctional machining: Thanks to the live spindle and precise positioning of the C-axis, not only turning, but also milling and drilling operations are possible, increasing the versatility of the machine. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the demands of modern manufacturing processes. With its robust construction and a wide range of machining capabilities, it is the ideal solution for precise machining of large components across various industries.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, pritisk: 70 letvica, skupna višina: 1.600 mm, skupna širina: 800 mm, skupna dolžina: 1.200 mm, temperatura: 40 °C, obratovalni tlak: 70 letvica, raven hrupa: 80 dB, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 l/day Potable Water Compact, fully automatic reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, small industrial and utility facilities. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: approx. 15,000 l/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salt content) Permeate Quality: Drinking water, approx. 500 mg/l residual minerals (reference value) Recovery Rate: approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: approx. 25 °C (operating range approx. -2 to 35 °C) Process Technology & Construction DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Generally no chemical feed water pretreatment (no acid dosing) required Integrated rinse and CIP function, controlled via PLC Skid-mounted on stainless steel frame (AISI 316) High-pressure piping in stainless steel, low-pressure side in seawater-resistant plastic Pump parts in contact with seawater made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: approx. 1,000 l/h (reference value) Operating Pressure RO Module: High pressure range, designed for seawater desalination Power Connection: 230 V, 50 Hz, 1~ Power Rating: approx. 6 kW Control, Monitoring & Safety Local control panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown, including: - Insufficient inlet pressure - Exceeding the allowable operating pressure - Overpressure in the permeate/concentrate line - Exceeding defined conductivity limits (with automatic diversion to drain) Automatic “Stop & Rinse” function: rinse of seawater-carrying components with permeate upon shutdown to reduce fouling during idle periods Njdpfx Adow Uf Ihevscp Dimensions & Weight (Skid) L × W × H: approx. 1,190 × 705 × 1,500 mm Weight: approx. 530 kg (dry), approx. 605 kg (in operation) Typical Applications Ships, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility facilities Backup or peak-load system for existing drinking water production Further technical documentation, photos, as well as information regarding scope of delivery, pricing, and availability are available on request.