Postaja za sestavljanje oken

RUCHSER Holzfenster-Fertigung Montage

Stanje: novo, You will find the description of the positions in the attached PDF document – Prices on request! RUCHSER standard offer with layout for a timber window production line with pre-milled glazing beads and screwed corner joints. Daily capacity approx. 15 windows Manufacturing line consists of: Pos. 1.0 – Item 107850000 RU-PWD-H1600/130/4 Double-sided Profile Trolley Length 1600 mm, Width 850 mm, Height 2140 mm For horizontal storage and transport of profile cuttings. 12 fixed support arms per column, welded to the column; 2 middle columns adjustable, clear spacing between support arms 130 mm, depth of support arms per side 400 mm, support arms covered with felt, featuring 4 swivel castors (plastic), diameter 150 mm, 2 of which have a locking mechanism. Pos. 2.0 – Item 0150001 RU-M Tilt-&-Turn Table Manually tiltable, support surface 1300 x 1400 mm, with four plug-in extensions, each 1000 mm long, including tool tray, without drainage groove for weather bar. Pos. 2.1 – Item 5009-1 2 Storage Boxes with Two Compartments Each (for RU-4; RU-2/4) Pos. 2.2 – Item 5062-1 Pull-out extensions to the left and right 500 mm and upwards 7000 mm, each with a foldable support leg. Pos. 2.2 – Item 5012-1 Swivelling Extension Tubes Length 700 mm (max. 3 pairs) Pos. 2.4 – Item 6125-2 Corner Assembly Fixture As right-angled stops, pneumatically lowerable with clamping unit for two profiles, mounted on RU-M Pos. 2.5 – Item 2069-1 Tilting Mechanism Instead of manual operation, pneumatically actuated Pos. 3.0 – Item 10782000 RU-EW-2S Double-sided Storage Cart Storage capacity max. 36 casement frames, L-shaped, bolted together, Length 1200 mm, Depth 800 mm, Height 2200 mm, support rails covered with felt, 4 swivel castors, 2 with brakes Pos. 4.0 – Item 6600000 RU-KWI-1000 Order Picking Cart Can be nested when empty, Length 1120 mm, Width 1100 mm, usable width 850 mm, Height 1900 mm, Nwsdoytx Urepfx Abrjh stocking height 1500 mm, load capacity 750 kg, mobile on 4 plastic swivel castors, diameter 150 mm, 2 with brakes, 2 pull-out extensions left and right, each 350 mm long, max. 1800 mm and height max. 2100 mm Pos. 5.0 – Item 740-300 RU-DH-F2 Double Reel Cart for 2 Rolls For roll sizes up to 620 x 350 mm (without spool), up to 800 x 350 mm (with spool), with 4 swivel castors, 2 with brakes Pos. 5.0a alternative to Pos. 5.0 – Item 744-200 RU-DH-F4 Double Reel Cart for 4 Rolls For roll sizes up to 620 x 350 mm (without spool), up to 800 x 350 mm (with spool), with 4 swivel castors, 2 with brakes Pos. 6.0 – Item 7360000 RU-BW-1200 Hardware Trolley With 16 compartments, Length 1200 mm, Width 700 mm, Height 1100 mm, with 2 storage shelves, mobile on 4 plastic swivel castors with a diameter of 125 mm, 2 with brakes Pos. 7.0 – Item 10009200 RU-FMOG/K Casement Assembly Tilt-&-Turn Table ...

Stanje: rabljeno, Število vreten: 5 kosov Delovna širina: 230 mm Višina skobljanja: 120 mm Avtomatski štiristranski skobeljni in profilirni stroj Weinig Profimat 23 E za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom. Vreteno 1: Spodaj / 5,5 kW / 40 mm Nwedex Ecguepfx Abreh Vreteno 2: Desno / 5,5 kW / 40 mm Vreteno 3: Levo / skupen motor z #2 / 40 mm Vreteno 4: Zgoraj / 7,5 kW / 40 mm Vreteno 5: Spodaj / 4 kW / 40 mm

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: nepreverjeno, delovna širina: 220 mm, višina skobljanja: 120 mm, premer vretena: 50 mm, širina skobljanja: 220 mm, delovna višina: 120 mm, skupna masa: 7.500 kg, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 10, moč: 105 kW (142,76 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Hydromat 22 B With grooved bed 10 spindles Working width: 220 mm Working height: 120 mm Spindle diameter: 50 mm Feed: 7.5 kW / 8–40 m/min Spindle arrangement: 1–Bottom (7.5 kW) – with hydro clamping 2–Right (7.5 kW) 3–Left (11 kW) 4–Right (7.5 kW) – with straight jointer 5–Left (7.5 kW) 6–Top (15 kW) – with hydro clamping 7–Bottom (7.5 kW) – with hydro clamping 8–Top (7.5 kW) – with hydro clamping and straight jointer 9–Bottom (7.5 kW) – with hydro clamping and straight jointer Nwodpfx Asu Udd Sobrjh 10–Universal (7.5 kW) 6 powered rollers in the table

Stanje: pripravljen za uporabo (rabljen), Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Jointing table length: 2000 mm Feed motor: 4 kW Feed speed: 5–24 m/min 1 WEINIG Planing and Moulding Machine Unimat 23 E ----- 6 spindles (including 2 x right), reinforced motors, 8,000 rpm, ATS control system Machine will be cleaned and function-tested prior to delivery Working width: 20 – 230 mm Working height: 8 – 120 mm 1st spindle (bottom), 5.5 kW (motor replaced) ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle: 125 – 180 mm Rabbetting device incl. tool Hardened table insert in front of 1st bottom spindle 2nd spindle (right), 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle (left) ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, incl. side pressure roller, spring-loaded 4th spindle (right), 8.3 kW (motor replaced) ----- Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle (top), 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool circles: 112–200 mm Max. profiling depth: 35 mm Nwodpfx Asxz Hh Ujbroh Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable to tool circle and can be swung away from tool, spring-loaded 6th spindle (bottom), 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles – general ----- All moulding spindles with high concentric accuracy Lubrication points for axial spindle movement Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely adjustable from 5–24 m/min Infeed roller in front of 1st lower tool, pneumatically controlled up/down Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustable feed roller travel relative to left spindle, axial 35 mm Electrical system ----- Operating voltage: 440 V (voltage range 380–420 volts), 50 Hz Machine base, tables, and fences ----- Jointing table 2.0 m long (incl. jointer guide) Manual Waxilit pump for table resin removal One driven rubber roller (spring-loaded in outfeed table) Two driven rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital display Outfeed after top spindle with mechanical digital display ATS/system, automatic 2-axis positioning for spindle Nos. 3 and 5 Min. working height: 12 mm Electric height adjustment of top spindles and feed Central position of lubrication points on front of machine Electronic digital displays on spindle 3 and 5 (axial), spindle 6 (radial), spindle 4 (axial and radial) Safety and noise protection ----- Full safety enclosure Easy high...

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Profile Knife Grinder Weinig 925 Rondomat Stock Code: 15443 Price: on request Subcategory: Knife Grinders Manufacturer: Weinig Model: 925 Condition: used Tag Number: 15443 Nwoden Ut Slspfx Abrsh Machine Type: Grinders UMCC: G6775 Manufacturer: Weinig Model: 925 Rondomat Year: 1992 Serial Number: 925-438 Description: Weinig 925 Rondomat profile knife grinder We offer turnkey services with this machine. Printable page Get a quote General technical data: Spindle length: 9-1/2" Maximum tool diameter: 9" Motor: 1.5 HP, 220/440 V Maximum grinding wheel diameter: 8-7/8" Variable grinding wheel speeds: 1700, 2000, 2250, 2800 RPM Relief angle: 15 - 45 degrees Axial adjustment: 0 - 10 degrees Coolant included

Stanje: novo, Der neue Heinola SM Spaner ist jetzt zum Verkauf erhältlich. Er verfügt über zwei 160-kW-Motoren sowie zwei Hackeraggregate, die jeweils mit fünf geraden Hackmessern ausgestattet sind. Das Gesamtgewicht der Einheit beträgt ca. 14.000 kg. Nwodowfr Nuopfx Abroh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Weinig Rondamat 980 Year of manufacture: 2010 Technical data: Njdpfx Abowvvylerjwh Max. tool width: 330 mm With PowerLock: 322 mm Tool diameter: 100 - 300 mm With PowerLock (optional): 100 - 250 mm Grinding wheel diameter: 125 - 200 mm Spindle speed, frequency-controlled: 1,500 - 4,600 rpm Grinding spindle drive: 1.5 kW

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), We offer a complete line for sale: - System TM Bison loading machine - Weinig Hydromat H 22 B, year of manufacture: 1989 Nwsdpfx Abotqdfijroh - System TM Angus unloading unit Working dimensions: - Length: 450 - 2500 mm - Height: 20 - 80 mm - Width: 45 - 160 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 8.000 h, Four-side planer Weinig Model: Powermat 400 LE – machine with grooved table Year of manufacture: 2008 Operating hours: 8,000 Maximum working width: 230 mm Maximum working height: 120 mm The machine is equipped with 5 spindles with Powerlock system Njdpswybrnefx Abrowh Spindle configuration: - bottom: 5.5 kW - left and right: 7.5 kW each - top: 7.5 kW - bottom: 7.5 kW Spindle rotation speed: 6,000 rpm Feed speed steplessly adjustable via inverter: 5 to 30 m/min Electronic spindle positioning – Memory system The machine is in very good technical condition, supplied complete with cutter heads.

Stanje: rabljeno, Leto izdelave: 2004, Planer and Moulder Weinig Powermat 2000 PowerLock Technical Data Working width: 30 - 300 mm Working height: 19 - 200 mm First Lower Spindle Motor with brake: 18.5 kW Speed: 8000 rpm Cutterhead diameter: 125 - 180 mm 2nd Spindle First right spindle Motor with brake: 15 kW Cutterhead diameter: 93 - 200 mm 3rd Spindle First left spindle Motor with brake: 15 kW Cutterhead diameter: 93 - 200 mm Nedpfx Aeunbrbsbrswh 4th Spindle First upper spindle Motor with brake: 37 kW Cutterhead diameter: 93 - 200 mm 5th Spindle Second lower spindle Motor with brake: 22 kW PowerLock tool holder Speed: 8000 rpm Cutterhead diameter: 93 - 225 mm Feed System Frequency-controlled feed, infinitely adjustable: 6 - 36 m/min