Programska oprema za izdelavo oken PROLOGIC

PROLOGIC FenOffice 14 Prologic

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), An angular processing line for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, tenoning spindle length: 640 mm, profiling and feed pass length: 285 mm–320 mm, control system: Siemens WS400. Includes complete tool set and sash window tooling. Documentation available. Codpfxstq U A Ie Afqsrk

Stanje: rabljeno, Dimensions (L,W), mm Weight approx. 90 kg Height adjustable (yes/no): yes Lift 300 - 800 mm Worktable surface area 1,700 x 1,500 mm Max. table width 3,800 mm Payload approx. 130 kg Ruchser RU-4-SSP rotary-tilting table Cedpjvu Hfdefx Afqjrk ----- Support surface 1700 x 1500 mm, maximum table width when extended 3800 mm, pneumatically tiltable, weather leg recess, with 6 storage boxes each with 2 compartments, pull-outs underneath for widening, with 2 support feet and 2 flat clamping cylinders, lifting device from 300 - 800 mm, roller conveyor as setup surface, can be folded down. Load capacity 130 kg. Travel unit with 4 swivel castors with locking device (RU-4SSP) 2 stops for final inspection and sealing Wing assembly fixture with tool tray and adjustable stop for angled positioning for RU-4-SSP Holder for drill, screw gun, etc. with screwdriver holder Travel unit with flanged rollers RU-DKFA and RU-4SSP 3 double metre travel rail for the travel unit 25 x 10 mm ----- Price for the above-mentioned machine on request! plus packaging and shipping ----- (Technical data according to manufacturer's info - without guarantee!)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application area Clean air extraction systems for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a corresponding extraction port diameter Also suitable for multiple dust sources High-quality, well-engineered construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily switched from left to right, enabling flexible use Large service openings Large-volume, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for quick commissioning Credpfscnw U Dex Afqok Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter as standard in antistatic version, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp at control panel Fan positioned downstream of the filter Features: With innovative locking device for secure container positioning All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed castors and 2 swivel castors with parking brake Pre-fitted for connection of machine detection for up to 8 machines and slide controls Manual cleaning Sound pressure silencer available as accessory Model: RLA 125 M Item No.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal airflow: 1,095 m³/h Max. airflow: Vacuum at nominal flow: Filter surface area: 5.31 m² Filter material: dust class M Residual dust content: 0.1 mg/m³ Chip container volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1,100 x 830 x 1,650 mm Height from bottom of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Motor 7,35 kW 5 hitrosti 3500-10000 min–1 Nagib vretena rezkalnika 0-45° Dolžina pomične mize 1300 mm električno nastavljanje višine in nagiba Električno nastavljiv rezkalni omejevalnik Rezkalni omejevalnik popolnoma zložljiv Maksimalni premer orodja 250 mm Aluminijaste čeljusti omejevalnika 550 mm Centrex zaščita za rezkanje Teža cca. 700 kg Csdpfx Asxbq Ulofqjrk

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 3.200 mm, širina reza pri vzporednem vodilu: 1.300 mm, glavni premer žaginega lista: 450 mm, moč: 5,5 kW (7,48 KM), Oprema: dozator, motorna zavora, Stroj na voljo od oktobra 2025 - Odlično stanje - Digitalni prikaz za nastavitev višine, motorizirano nastavljiv - Digitalni prikaz za nastavitev nagiba, motorizirano nastavljiv 90° - 45° Cedow Rc H Hjpfx Afqsrk - Dolžina formatnega vozička 3200 mm - Predrezilo, 2-osno motorizirano nastavljivo - Digitalni prikaz širine reza na paralelnem vodilu 1300 mm, motorizirano nastavljiv - Moč motorja 5,5 kW (7,5 KM) Vario - Digitalni prikaz za brezstopenjsko nastavitev vrtljajev 2800 - 6000 min⁻¹ - Digitalni prikaz za kotni prislon, rezanje do 3800 mm - Podaljšek mize 800 mm

Stanje: rabljeno, Leto izdelave: 2014, Number of spindles: 5 pcs Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 4 kW Feed speed: 5–30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine will be cleaned and fully inspected. Short summary: ----- - 5 spindles - Powerful motors - Left and top spindles electronically adjustable for width and height Detailed description: ----- Technical specifications: Working width: 20–230 mm Working height: 10–120 mm Number of spindles: 5 1st spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 125–145 mm Tool circle rabbet cutter: 130–160 mm Axial adjustment range: 5 mm Rabbetting device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital display for radial adjustment 2nd spindle – right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle 40 mm below table level: 93–200 mm Tool circle 55 mm below table level: 93–180 mm Max. tool diameter for straight knife heads: 163 mm Max. tool diameter behind fence: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle – left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle 40 mm below table level: 93–200 mm Tool circle 55 mm below table level: 93–180 mm Max. tool diameter for straight knife heads: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Radial spindle CNC controlled 4th spindle – top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 93–200 mm Max. tool diameter for straight knife heads: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Radial spindle CNC controlled Segmented pressure shoe in front of upper tool holder, adjustable to tool circle and can be swung away from the tool, spring-loaded. Pressure shoe before and discharge after the top spindle with electronic digital displays, integrated into the memory function or PowerCom. 5th spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 93–200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5–30 m/min Infeed roller in front of 1st lower cutter pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment path of feed rollers relative to left tool holder, axial 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380-420 V), 50 Hz All spindles in IE2 design Electrical equipment according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1. Other electrical regulations not considered. Codpfx Aowzmu Refqjrk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč UniControl 12, letnik 2006, iz Norveške. - Za natančne tehnične specifikacije prosim odprite priloženi PDF dokument. Prečni prerez UniTec 12: - žagalna enota - rezkar za zaobljanje robov od spodaj - dvigovalno vreteno št. 1 - dvigovalno vreteno št. 2 - dvigovalno vreteno št. 3 Dolga, profilna sekcija UniVar 12: - profilni rezkar - profilni rezkar - profilni rezkar vodoravno - profilni rezkar - profilni rezkar - profilni rezkar Skupna električna moč 114 kW, 400 V AC Potrebna moč odsesavanja 270 m3/min Potrebni stisnjen zrak 1000 L/min Stroj je bil v uporabi do 15.08.2023 Plačilo: pred nakladom Cedpfx Afjmgc I Neqork Dostava: ex tovarna Rendalen - Norveška Stroj se nahaja na Norveškem (v bližini Trondheima) Trenutno je stroj odklopljen, shranjen v suhem in toplem skladišču ter je pripravljen za pošiljanje. Rekman Maskin & Service - servis lesnoobdelovalnih strojev od 1986.

Stanje: skoraj kot novo (rabljeno), Profile grinding machine Utma model P20 Codpfx Aoff H E Refqerk

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm Cjdpfx Aet R T Hcjfqerk - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 1.020 h, Funkcionalnost: popolnoma funkcionalen, On offer: A Holzher nesting machine with very low operating hours and top-of-the-line equipment! Manufacturer: Holz-Her Model: Nextec 7707 Year of manufacture: 2018 Weight: 4,980 kg Operating hours: 1,020 Crjdpfx Ajwtiq Sjfqok Processing length in X: 3,100 mm Processing length in Y: 2,200 mm Vector speed: 110 m/min Equipment & Features: Milling unit: 12 kW, air-cooled, 1,000 – 24,000 rpm Drilling unit (Drill Head XL): 24 spindles (18 vertical, 6 horizontal) including saw unit in X-direction (grooving in X-direction) Angle gear unit: e.g., Lamello P-System Workpiece support: High-flow nesting table with continuous vacuum field, 16-zone vacuum, software-controlled Safety device: Light barrier Workpiece clamping: 2 x 140 m³/h vacuum pumps, low-maintenance dry-running type, additional 250 m³/h dry-running vacuum pump Tool changer: 10-position pick-up changer integrated into the machine frame, 1-position X/Y pick-up changer with tool cover NEXTEC module: CabinetSelect DirectCut: Line laser in X-/Y-direction, including software Software: CAMPUS machine license included, aCADemy CAD/CAM module and CabinetControl Base, 'Warehouse' software module, Production software module, BetterNest free-form nesting module