Stroj za valjanje navojev

PROFIROLL PW 10e

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Bsdpet Hw N Tsfx Ag Ejdd Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: rabljeno, Tenon cutter / Dowel saw LOSER model AA220 - USED Bedpfsqpdkcjx Ag Eodd - Capacity: 7500/1500 dowels per hour - Dowel diameter capacity: 6–18 mm.

Stanje: dober (rabljeno), Description: Bdjdpfx Asy Amqzog Esd The machine is in good technical condition; testing is possible by prior arrangement. Maximum swing diameter: 660 mm Maximum turned diameter: 660 mm Main spindle: - Speed range: 35–5000 rpm - Main drive power: 22/15 kW - Maximum torque: 349 Nm - Spindle bore: 76 mm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Sub-spindle: - Speed range: 35–5000 rpm - Power (10 min/continuous): 18.5/15 kW - Maximum torque: 326 Nm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Coolant tank capacity: 300 l Machine power requirement: 66 kVA Operating voltage: 400 V / 50 Hz Air pressure: 5 bar, 500 l/min Control system: MAZATROL Fusion 640 MT Coolant rinsing: - Pump capacity: 20 l/min - Pump pressure: 5 bar Accessories: - Technical documentation - Chip conveyor with coolant system - Tool magazine for 20 tools - B axis (positioned at 0.001°), C axis, Y axis - Secondary spindle positioning indexing - Synchronization of main and sub-spindle - Tool presetter (Tool Eye) - Front door locking - Tool magazine for 20 tools - Complete cooling system - Interface for IC memory card

Stanje: zelo dobro (rabljeno), Premer obdelovanca: 10 - 250 mm Dolžina navoja: 900 mm Navojni korak: 0,3 - 100 mm Vrtljaji vretena: 72 / 1700 - 2540 min⁻¹ Odrezovanje: 0,03 - 8 mm Maks. vpenjalna dolžina: 1190 mm Bdjdpfx Ageyb S Rie Eod Največji modul: 10 Obdelovalni vrtljaji: 0,4 - 160 min⁻¹ Skupna potrebna moč: 13 kW Teža stroja približno: 7,4 t Potreben prostor približno: 4,5 x 2,0 x 2,1 m Veliko dodatne opreme: prirobnice, pretvorniki, naprave in valji za obdelavo, notranje brusno vreteno, podporniki ipd.

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Bsdpfxjuz If Nj Ag Esdd Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: rabljeno, TECHNICAL DATA - Max. capacity: 40 [t] Bjdpfx Asuhb Uhjg Esdd - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions (L x W x H): 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock device - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Stanje: rabljeno, Thread rolling machine - ORT RP18 2-roll thread rolling machine Swiveling spindle Overhauled with Siemens PLC See video Bsdpfx Aouua H Rog Eodd The machine is powered and available in our warehouse Test run possible

Stanje: dober (rabljeno), Leto izdelave: 1998, dolžina navoja: 65 mm, Maksimalni pritisk: 10T Maksimalni premer obdelovanca: 30Ø Bjdpfxox H Rmus Ag Ejdd Minimalni premer obdelovanca: 2Ø Minimalna dolžina reza: 2mm Maksimalna dolžina reza: 65mm Korak / vodilo: 30mm Premer osi: 85 - 135mm Dolžina: 1600mm Širina: 1400mm Višina: 1800mm Teža: 2300kg Prosimo, upoštevajte: Podatki na tej strani so bili po najboljših močeh pridobljeni s strani nas in, kjer je mogoče, od proizvajalca. Informacije so podane v dobri veri, vendar natančnost ni zagotovljena. V skladu s tem ne predstavljajo nobene zaveze ali pogodbenih pogojev. Priporočamo, da preverite vse ključne podatke.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, številka stroja/vozila: MA0139_1335, Exhibition unit available immediately: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and air receiver tank Sigma Control 2 controller Year of manufacture: 2024 Operating hours: 1 h Pressure: 8 bar Rated power: 11 kW Free air delivery at 7.5 bar: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Air receiver tank volume: 350 litres Refrigeration dryer pressure dew point: +3°C Electronically controlled condensate drain: ECO DRAIN Dimensions (L x W x H): 750 x 1335 x 1880 mm Weight: 579 kg Bdedjhwwyropfx Ag Ejd Attractive lease financing for new machines available through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock!

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Pressing force: 10 t Maximum workpiece diameter: 40 mm Thread length: 70–80 mm Workpiece diameter min/max: 3 / 40 mm Rotational speed: 47–94 rpm Feed rate: 0.5 – 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions (W x D x H): 1.4 x 1.4 x 1.7 m Hydraulics dimensions: 0.8 x 1.2 m Bdodpfx Agsw D Aq Te Esd Hydraulic drive Manual and automatic cycle Adjustable roller speed Maximum thread diameter: 40 mm; Minimum thread diameter: 3 mm Up to max. pitch: 3.5 mm; Max. pitch: 1.75 mm Roll width min.: 80 mm; max.: 120 mm Spindle speed: 47–94 rpm Roller spindle diameter: 40 mm Various rollers as accessories