Zgrabi Bale nakup rabljenega (553)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, skupna masa: 300 kg, skupna dolžina: 1.500 mm, nosilnost: 2.000 kg, širina nosilnega okvirja vilic: 1.000 mm, obratovalne ure: 100 h, This custom-made bale clamp was used to fill and compact problematic materials—such as mineral wool in this case—into big bags. Furthermore, the filled big bags were loaded into a roll-off container using the same clamp. All of this was accomplished without any personnel coming into contact with this hazardous material or the big bags themselves. (PLEASE NOTE: The forklift is not included in the price!!!) Iedpfx Ajvxbc Sjh Dotn

Leto izdelave: 2013, Stanje: rabljeno, Technical Data for Bale Opener Line for RDF, MSW, Paper, Cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Year of Manufacture: 2015 Number of Bales Opened: 674 Operating Time: Only 3 days, exclusively during commissioning of the entire system at new installation Opening Time: approx. 45 seconds per bale Bale Dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Maximum Bale Weight: 2,000 kg System Discharge Height: 1,400 mm Maximum Conveyor Width: 1,200 mm Material to be Opened: RDF/MSW System Availability: 98% Noise Level of Bale Opening Line: 85 dB(A) Total Connected Load: 37 kW Rated Current: 125 A Operating Display: SIEMENS SIMATIC HMI Touch Itedpfxsu Tg I Do Ah Dsn Control System: SIEMENS S7 ET200S Machine Dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of Supply: - Feed Conveyor 3,500 x 1,200 x 1,400 mm - Infeed Conveyor to Opener 1,500 x 1,200 x 1,400 mm - Bale Opener (gripper with cutter) Special Equipment: - Oil heater in hydraulic oil tank - Control cabinet heater - Oil cooler for hydraulic unit Explanation for Short Operating Time: The complete Cross Wrap bale opener line type BO 4000 was installed in 2015 at a municipal waste incineration plant. The purpose of the installation was to allow municipal waste to be received, baled, wrapped, and stored in case of a plant malfunction or maintenance, until normal operation resumed. After the issue was resolved, all bales would then be opened and the waste fed back into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned and subsequently never used in regular operation. Only during initial commissioning in 2015 were 674 bales opened over three days. The system is in excellent, ready-to-use condition. Due to plant modifications, the installation area is needed for other purposes, and the complete line is therefore offered for sale. Brief Description of the Bale Opening Process: The compressed bales are placed onto the infeed conveyor from the side or rear using a forklift. For opening, the bales must be positioned with the wire or twine binding running horizontally to the conveyor; otherwise, bales must be rotated 90°. The infeed conveyor moves each bale to the cutting unit. The grippers hold the wire or twine strapping firmly. The rotating knife cuts the bale lengthwise. The gripper then returns to its initial position. The opened bale is then conveyed to the discharge chute and drops onto the subsequent conveyor system. Notes: Original price of the complete system was €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. The system has been dismantled into transportable units, stored, and is available for inspection and loading at short notice. No liability is assumed for the technical specifications or any potential errors.

Stanje: pripravljen za uporabo (rabljen), HSM V-Press 860 baler, year 2005-2009, price: €5,600 Pressing force: 54 kN Unit pressure: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening (W x H): 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Ijdpera Rbgefx Ah Djtn Binding material: Wire Pressable materials: Foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013-2015, price: €7,500 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 ex demo, year 2020, price: €13,000 4-fold wire bale tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000 – 1,200 Bale weight (approx.): 500 kg Technical data: Dimensions (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle time (s): 35 Press force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Press force: 594 kN Voltage/Frequency: 400 V / 50 Hz Motor power: 4 kW Feed opening (W x H): 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Loading method: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: Wire Pressable material: Film, cardboard Idle cycle time: 25 s

Stanje: rabljeno, Leto izdelave: 2007, nosilnost: 10.000 kg, Naprodaj C-kavelj za dvigovanje kolutov PFEIFER Stanje: rabljen, a tehnično brezhiben in pripravljen za delo. Zanesljiva dvižna naprava nemškega proizvajalca PFEIFER Seil- und Hebetechnik, izdelana leta 2007. Tehnični podatki: Nosilnost: 10 t Konstrukcija: C-oblikovan dvižni kavelj (C-kavelj) Proizvajalec: PFEIFER, Nemčija Letnik izdelave: 2007 Namen uporabe: Naprava je namenjena dvigovanju in transportu težkih kolutov z uporabo mostnih ali portalnih dvigal. Najpogostejša področja uporabe: Kovinska industrija – za dvigovanje jeklenih, aluminijastih ali drugih kovinskih kolutov Papirna industrija – za premikanje velikih papirnih kolutov Logistika in skladiščenje – za varen transport in skladiščenje kolutov Itodpfxexhgvfo Ah Djn C-oblikovana konstrukcija omogoča hitro in priročno zajemanje koluta skozi sredino ter zagotavlja stabilno porazdelitev teže. To povečuje varnost dela in izboljšuje učinkovitost manipulacijskega procesa. Za dodatna vprašanja nas kontaktirajte.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, Year of manufacture: 2025 Itsdjxlugtjpfx Ah Don

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, obratovalne ure: 23.000 h, številka stroja/vozila: 00834, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.315 mm, širina bale: 1.100 mm, višina bale: 720 mm, trajanje garancije: 3 meseci, moč: 30 kW (40,79 KM), leto zadnje generalne obnove: 2025, Oprema: dokumentacija / priročnik, Bollegraaf Recycling Solutions, de oorspronkelijke fabrikant van deze Bollegraaf-pers, biedt hierbij de volgende machine(s) aan: Een gereviseerde HBC60 (30 kW) Gereviseerd – in zeer goede technische staat Bouwjaar: 2008 Volumecapaciteit m³/u max.: 365 334 321 301 Volumegewicht kg/m³ max.: 15 30 50 80 Gewichtscapaciteit t/u max.: 5,5 10 16 24 Baalgewicht: 400 – 800 kg, afhankelijk van de soortelijke massa van het materiaal en baallengte Baallengte: - instelbaar Baalhoogte: - 720 mm Baalbreedte: - 1.100 mm Vulopening: - 1.100 mm x 1.320 mm Max. aanvoermateriaal: - 1.500 mm x 1.200 mm Persdruk hoofdram: - max. 60 ton Persdruk voorpersklep: - max. 25 ton Cycletijd: - 18 seconden Hoofdmotor: - 45 kW Motor Twistomat: - 2,2 kW Motor tegenstroompomp: - 1,1 kW De volgende revisiewerkzaamheden zijn uitgevoerd in onze officiële Bollegraaf OEM Refurbishment Workshop: * Veiligheidsdeuren naaldinrichting vervangen door nieuwe * Achterwielen ram vervangen door nieuwe * Bronsstrip boven ram vervangen door nieuw * Positieschakelaar beweegbare balk ram vervangen door nieuwe * Schraper boven ram vervangen door nieuw * Dichting voorperscilinders vervangen door nieuwe * Nieuwe stalen draagbalken kanaalcilinder * Nieuwe buisjes opgelast en wielen gangbaar gemaakt * Nieuwe duwcilinder onder verticale bindunit * Veiligheidsluik achter naaldinrichting vervangen door nieuw * Diverse kabels en ASi-modules vervangen door nieuwe * Nieuw luchtfilter * Nieuwe oliefilters Itedpfx Aexck U Ush Don

Stanje: rabljeno, Leto izdelave: 1986, Primerno za uporabo pri: kmetijski stroji Iedexmhpkjpfx Ah Detn

Stanje: rabljeno, Technical data for bale loosening drum: Iedpsu Thx Refx Ah Djtn Manufacturer: Not known Type: Bale Loosening Drum Year of manufacture: Not known Drum dimensions: 6000 x 3000 mm (L x D) Height of welded-in spiral: 300 mm Drum frame dimensions: 4900 x 3400 x 2200 mm (L x W x H) Drive power: 2 x 4 kW Function description: The bale loosening drum was fed with compressed paper bales from which the binding wire had previously been removed. The compressed and compact bale is broken up and loosened by baffle plates welded in parallel to the conveying direction inside the drum. A spiral welded at a pitch to the conveying direction transports the loosened material further to the drum outlet. There, it falls via a chute onto a conveyor belt for further processing. Scope of delivery: - Bale loosening drum - Frame with drive and roller bearing for bale loosening drum Remarks: Documentation (Operating Manual, CE Declaration, Electrical/Hydraulic Circuit Diagram) is not available and cannot be supplied. Inspection by appointment is possible. We do not assume any liability for the technical information or possible errors.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Balinirni stroj Hsm 500.2 vl Štirikratno vezanje bale z žico Dimenzije bale: d x š x v (mm): 1200 x 800 x 1000 - 1200 Teža bale (kg): cca 500 kg Tehnični podatki: d x š x v (mm): 1213 x 1824 x 2987 Vhodna odprtina (mm): 1200 x 565 Cikel (sek): 35 Pritisk (T): 54 Isdpfx Ahora Ak Ee Dotn Napajanje (V): 400 (tri faze) Leto izdelave 2002-2005 cena 3400 EUR Balinirni stroj Hsm V press 500.2 VL Leto izdelave 2006-2008 cena 3600 EUR Transportna višina: 2600 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 26 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 630 mm, dolžina bale: 1.500 mm, širina bale: 800 mm, višina bale: 1.140 mm, teža bale: 500 kg, skupna širina: 1.060 mm, skupna višina: 2.576 mm, skupna dolžina: 2.075 mm, skupna masa: 1.220 kg, raven hrupa: 65 dB, moč: 4,6 kW (6,25 KM), Zmogljiv balirni stroj Orwak 3820 Power. Še posebej primeren za večje dimenzije kartona ali folije zaradi izjemno velikega polnilnega odprtina 1500 x 630 mm. Itjdpfexmvc Esx Ah Don

Stanje: dober (rabljeno), Leto izdelave: 1991, Дуже гарний стан. Капітальний ремонт у 2023 році. Плоский вузол для ручки. Машина має опцію для виробництва пакетів з однієї або двох шарів (1 ply & 2 ply). Машина оснащена обладнанням для прорізування (SLIT EQUIPMENT) дна пакета. Мінімальна та максимальна ширина пакета без ручки: 160 - 320 мм Мінімальна та максимальна ширина пакета з ручкою: відстань між центрами ручок 250 мм - 320 мм Мінімальна та максимальна глибина фальцювання (gusset) пакета без ручки: 60 - 180 мм Мінімальна та максимальна глибина фальцювання пакета з ручкою: відстань між центрами ручок 250 мм - 180 мм Мінімальна та максимальна довжина різання без ручки: 350 - 610 мм Мінімальна та максимальна довжина різання з ручкою: 350 - 580 мм Мінімальна та максимальна ширина рулону: 460 - 1020 мм Максимальний діаметр рулону: зовнішній шар – 1500 мм / внутрішній шар – 1300 мм Діаметр втулки рулону (core): 76 мм Мінімальна та максимальна щільність паперу: - 1 шар: 50 - 120 г/м² - 2 шари: максимум 100 + 80 г/м² (як робили) Формувальні пластини (за шириною пакета): 7 шт. Розміри формувальних пластин: 160, 180, 240, 260, 280, 300, 320 мм Розміри різальних шестерень (для довжини різання): 35, 36, 41, 45, 48, 50, 55, 56, 57, 58, 62 Орієнтовна продуктивність машини з ручкою: 100 шт/хв Орієнтовна продуктивність машини без ручки на 1-шаровому пакеті: 150 шт/хв Орієнтовна продуктивність машини без ручки на 2-шаровому пакеті: 120 шт/хв Загальне електричне навантаження: 25 кВт Завантаження рулону в машину: - Зовнішній шар: автоматичне завантаження Ijdsxfl Izjpfx Ah Dstn - Внутрішній шар: завантаження навантажувачем Габаритні розміри (ШхДхВ): 4,5 х 13 х 3,30 м

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, nosilnost: 1.000 kg, dolžina vilic: 1.200 mm, lastna masa: 648 kg, Klešče za celulozo / bale, Težišče: 500, ISO razred: ISO razred 2 = 1.000 - 2.500 kg, Tip stebra: Ni, Tehnično stanje: zelo dobro, Opis: 360° vrtljive klešče za bale, odprtje 790 do 1.630 mm znotraj, roke 1.000 x 300 mm, zelo dobro stanje! 360° vrtljive klešče za bale, odprtje 790 do 1.630 mm znotraj, roke 1.000 x 300 mm, zelo dobro stanje! Vrtljiva naprava. Isdpfx Asw Sbf Deh Dotn

Leto izdelave: 2022, Stanje: novo, Device: Round bale grab Ijdsn Tm Nkepfx Ah Dotn Load capacity: 3,000 kg Suitable for use with: Agricultural machinery

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 19.750 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, kapaciteta rezervoarja za olje: 2.000 l, lastna masa: 33.000 kg, volumenski pretok: 643 m³/h, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 R-FU Year of Manufacture: 2015 Itsdpexb Dvvofx Ah Den Operating Hours: 19,750 hours (as of July 2025) Number of Bales Produced: 24,760 bales (as of July 2025) Main Press Force: 1,000 kN Specific Press Force: 120 N/cm² Shear Edge Ejector Force: 121 kN Insertion Chute Dimensions: 970 x 1,800 mm Theoretical Cycle Time (idle): 8.3 seconds Theoretical Throughput: 643 m³/hour Bale Dimensions: 1,100 x 750 mm; length variable from 600 to 2,000 mm Drive Power: 2 x 45 kW, frequency-controlled Connected Load: 110 kW Total Power Consumption: 213 A Fuse Protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput Rates for a Bulk Density of 20 kg/m³: 12.86 t/hour Bulk Density of 50 kg/m³: 32.15 t/hour Bale Weights (at approx. 1.2 m bale length): 650 to 750 kg/bale, depending on material Hydraulic Oil Tank Volume: 2,000 L HVI 46 PLC Control: Siemens S7-300 Control Panel: Siemens TP 700 Baler Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation Dimensions with Conveyor Technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of Baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Special Machine Features: - Access interlock via key transfer system - Electro-hydraulic locking of the press carriage during tying, ensuring the press ram does not shift with highly expansive materials Additional Optional Equipment Ordered: - Frequency-controlled main drive 2 x 45 kW, offering up to 40% energy savings compared to standard 2 x 45 kW motorization, with the same performance output - Manual selection/deselection of wire tying for non-expansive materials, saving tying wire - Shear-edge ejector with 121 kN pressing force - Sensor-based wire monitoring with automatic press shutdown on wire break or end - Bale chute - Visual warning signal mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, operational condition, regularly cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Model: Chain Belt Conveyor KF 1800 Year of Manufacture: 2015 Belt Speed: 0.36 m/s Input Belt Length: 7,000 mm Inclined Belt Length: 14,500 mm Gooseneck Length: 1,550 mm Incline Angle: 30° Nominal Width: 1,800 mm Usable Width: 1,638 mm Overall Conveyor Height: 7,745 mm Pit Dimensions for Conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: For sale are the input conveyor, the transverse distributor belt, and the baler—including bale chute, but without wire pulling stations and without wire. Notes: The full documentation is available (operating manual, CE declaration, electrical/hydraulic schematic). Inspection is possible by appointment. No liability is assumed for technical data or potential errors.

Stanje: pripravljen za uporabo (rabljen), Balirni stroj Hsm HL 4809 LI - Velika odprtina za polnjenje, idealna za velike škatle - Posoda s prekucnikom za enostavno polnjenje Pritisna sila v kN: 480 - Napetost/frekvenca: 3 x 400 V / 50 Hz Itsdera Dddepfx Ah Djn - Teža bale v kg (odvisno od materiala): do 400 kg - Dimenzije bale dolžina x širina x višina v mm: 1200 x 1100 x 750 - Dimenzije stroja dolžina x širina x višina v mm: 5648 x 1849 x 2515 Trajanje praznega cikla v sekundah: 53 - Ročno vezanje: 4-krat z žico

Leto izdelave: 1994, Stanje: pripravljen za uporabo (rabljen), Engine power: 15.5 kW / 19.5 kW, pressing force: 320 kN, specific pressure: 425 kN/m², machine dimensions (X/Y/Z): approx. 5700 mm / 1900 mm / 1800 mm, weight: approx. 6000 kg. The machine is malfunctioning due to moisture and should be inspected. Itodsip D Rpspfx Ah Don

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Scraper conveyor with belt length: 5 m Box width: 0.55 m Box height: 0.5 m Internal width: 0.38 m Scraper spacing: 500 mm Iedpfx Ahod H Twij Djtn Incline: 30° Discharge height: 2.5 m with slewing ring for swivelling without drive motor

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, nosilnost: 1.000 kg, dolžina vilic: 1.200 mm, lastna masa: 648 kg, Klešče za celulozo / bale, Težišče: 500, ISO razred: ISO razred 2 = 1.000 - 2.500 kg, Tip stebra: Ni, Tehnično stanje: zelo dobro, Opis: 360° vrtljive klešče za bale, odprtje 790 do 1.630 mm znotraj, roke 1.000 x 300 mm, zelo dobro stanje! 360° vrtljive klešče za bale, odprtje 790 do 1.630 mm znotraj, roke 1.000 x 300 mm, zelo dobro stanje! Vrtljiva naprava. Iedpow Sbfwjfx Ah Djtn

Stanje: rabljeno, Four Wins – The Success Building Blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions WE OFFER Hydraulic KAUP Bale Clamp for Forklifts For the transport and handling of bales of different materials. This attachment replaces standard forklift forks and is specifically designed to securely grip, transport, and, if necessary, press or compress bales without pallets. Manufacturer: KAUP Type: 1.5T 413 Itjdpfx Aswvizveh Don No.: 068007 Load capacity: 1,400 kg Hydraulic pressure: 200 bar Dead weight: 420 kg Forward projection: 133 mm Load center distance: 285 mm This is a used item. PROJECT PLANNING Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon when placing an order. The price is per unit/net price or as specified in the item description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US The company DLK in Nordhorn trades in new and used products from the areas of warehouse logistics, conveyor technology, mezzanines, textile storage as well as machinery for trade, industry, and craft businesses. We continuously offer a range of interesting used equipment from various manufacturers/brands under attractive conditions. Please contact us if you have any questions.

Stanje: pripravljen za uporabo (rabljen), Pritisk 60 ton LETNIK 2018-2020 stane 5500 EUR dimenzija bale 120 x 80 x 110 cm dimenzija stiskalnice 1900 x 1400 x 2200 mm (višina) teža stiskalnice pribl. 2430 kg teža bale do 500 kg gretje olja motor 7,5 kW Isdjra Nqhjpfx Ah Djtn Nova razstavna balirka stane 11.000 EUR

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), A Big HK 25 press is available. Pressing force: 250 kN, dimensions (X/Y/Z): approx. 5600 mm / 1100 mm / 3900 mm, weight: approx. 5000 kg. Ijdetva Dcjpfx Ah Djtn

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, nosilnost: 1.400 kg, lastna masa: 390 kg, vrsta pogona: Keine, Celulozna/sponka za bale Težiščna točka: 500 mm Itodpfx Ahewti E No Don ISO razred: ISO razred 2 = 1.000 - 2.500 kg Tip droga: Brez Stanje tehnično: Zelo dobro Opis: Tip 1.5T413, stranski pomik +/- 100 mm, stranski pomik neodvisen od razpona odpiranja, skupna širina 970 mm, razpon odpiranja 495 - 1675 mm, višina roke 440 mm, dolžina roke 1000 mm, roka zunaj gladka, znotraj z okroglo železo, konice rok poševne, nosilnost 1400 kg pri 500 mm težišču, sprednja dimenzija 158 mm, težišče pri 289 mm, teža ca. 390 kg, vklj. manometer, priključek ISO - Razred 2A

Leto izdelave: 1990, Stanje: pripravljen za uporabo (rabljen), Two AUTEFA baling presses with automatic bale strapping are available. Pressing force: 70t, pre-pressing force: 25t, pressing dimensions X/Y: 1100mm/600mm, drive: hydraulic, power consumption: 22kW, pressing capacity: 4 bales/h, bale weight range: 400kg–800kg, material feed diameter: 250mm, machine dimensions X/Y/Z: approx. 4000mm/2000mm/3000mm, weight: approx. 7000kg. Documentation is available. An on-site inspection is possible. Iedsv Tnx Aspfx Ah Dstn

Leto izdelave: 2004, Stanje: pripravljen za uporabo (rabljen), Connected load: 15.5 kW, weight: 6.8 t. Ijdpfxoip D Rze Ah Dstn

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), Pressing force: 50 t, Opening dimensions: 870 x 1500 mm, Bale dimensions: 1500 x 1100 x 1100 mm, Bale weight: 450 kg, Length: 1524 mm, Width: 2100 mm, Height: 3217 mm, Weight: 1.93 t, Operating hours: 18 h. Isdeirakgspfx Ah Dotn