Weinig Unicontrol 10 nakup rabljenega (498)

Stanje: rabljeno, Leto izdelave: 2006, skupna višina: 1.700 mm, skupna dolžina: 1.200 mm, skupna širina: 1.300 mm, Lastna teža: 750 kg Cena: Po dogovoru - Leto izdelave: 2006 - Dokumentacija na voljo: Ne - CE-certifikat: Ne - Serijska številka: 108442 - Transportne dimenzije: 1200mm x 1300mm x 1700mm (d x š x v) - Transportna teža [kg]: 750 kg - Transportni paketi [kos]: 1 Finančne informacije DDV: Naveden cena ne vključuje DDV DDV/obračun razlike: DDV je odbit za podjetja Dostava in odkup možno kadarkoli za vso industrijsko opremo Kodpfx Adeyu Sb Iskolp Lukas van Rossum

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, delovna širina: 230 mm, višina skobljanja: 120 mm, premer vretena: 50 mm, širina skobljanja: 230 mm, delovna višina: 120 mm, moč pogonskega motorja podajalnika: 37.000 W, največja hitrost vrtenja: 6.000 obr/min, vrtljajska hitrost (min.): 3.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, premer gredi: 50 mm, število vreten: 10, vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Powermat 2500 10 spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed unit: 37 kW / 12–120 m/min, Kledpfx Adsyr Ar Sskep Spindle configuration: 1–Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2–Right (11 kW) 3–Left (11 kW) 4–Top (37 kW) – with fully automatic straight jointer 5–Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6–Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7–Top (53 kW) – with hydraulic clamping, variable speed 3000–6000 rpm 8–Bottom (53 kW) – with hydraulic clamping, variable speed 3000–6000 rpm 9–Top (53 kW) – with hydraulic clamping, variable speed 3000–6000 rpm 10–Bottom (53 kW) – with hydraulic clamping, variable speed 3000–6000 rpm Short infeed table 1.3 meters (4 rollers) with 2 powered rollers above the table, and 2 powered rollers integrated into the table. Both table rollers are liftable. Table height adjustment with electronic digital display. Incl. 2 heavy-duty side pressure rollers, diameter 140 mm, pneumatic. Mounting feet, height 320 mm, for table height 1190 mm Marathon P O W E R Coating for machine table, fences and guiding rails (excluding infeed table and special table plates). Special coating for protecting table tops, fences, and guiding rails against excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table de-resining. Powered rollers in the machine table, hardened. Heavy steel pressure rollers from above, diameter 120 mm. Located at the right and left spindle positions.

Stanje: dober (rabljeno), Tlačna čevelj za Weinig stroj za skobljanje in profiliranje Kledpfx Aeyryzksdkjp

Stanje: zelo dobro (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 1193-1003, 6 glav tekoče nastavljanje hitrosti podajanja električna nastavitev pritisne letve ročna mazanje mize nastavljivost glav v dveh oseh Klsdpfeytkchjx Adkjp

Stanje: rabljeno, Leto izdelave: 2000, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6–36 m/min WEINIG Planer and Moulder Unimat 23 E 6 spindles (2 on the right), powerful motors, optional infeed magazine EM 11 Working width: 20–230 mm Working height: 8–120 mm 1st spindle, bottom, 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–180 mm Rebate device Hardened table insert in front of 1st bottom spindle 2nd spindle, right, 11.0 kW ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, including side pressure rollers, spring-loaded 4th spindle, right, 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle, top, 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Segmented pressure shoe in front of top spindle, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded. 6th spindle, bottom, 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm General spindle details Kjdjwqr Rvspfx Adkjlp ----- All profiling spindles with high concentricity accuracy. Lubrication points for axial spindle movement. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed, steplessly adjustable: 6–36 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled for height Durofer pointed tooth rollers (Weinig patent) with depth limiter, self-cleaning Axial adjustment of feed rollers next to the left spindle: 35 mm Extension of the oscillating axis next to the left spindles to 150 mm Machine electrics ----- Operating voltage: 380–400–415 Volts, 50 Hz Machine base, tables, and fences ----- Surfacing table: 2.5 m long (incl. jointer fence) 0.5 m aluminum extension for surfacing table, incl. jointer fence extension Manual Waxilit pump for table resin removal One driven rubber roller (spring-loaded in outfeed table) Pressure elements and guides ----- Top pressure rollers, pneumatically operated Top pressure rollers can be swung away next to the right spindles for easy tool change Machine operation ----- Pressure shoe in front of top spindle with mechanical digital readout Outfeed after top spindle with mechanical digital readout ATS/E system, automatic 2-axis positioning for spindles 3 and 4 Min. working height: 12 mm Electric height adjustment for top spindles and feed Central lubrication points on machine front Safety and noise protection ----- ...

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Unimat 23 Working width: 230 mm Working height: 160 mm Number of spindles: 5 Spindle configuration: Bottom: 5.5 kW Right Left: 7.5 kW Top: 11 kW Bottom: 5.5 kW Klodstxxwdjpfx Adkop Pneumatic material hold-downs divided into 4 sections Feed speed adjustable by variator: 4–24 m/min Infeed table length: 1980 mm Drive via cardan shafts Heavy soundproof cabin Machine dimensions: 380 x 226 x 178 cm (H) CE certificate

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, delovna širina: 230 mm, višina skobljanja: 120 mm, premer gredi skobeljnika: 40 mm, višina obdelovanca (maks.): 120 mm, WEINIG Unimat 300 — štiristranski skobeljni stroj 230 x 120 mm Čeprav je letnik 2005, je ta stroj praktično kot nov! Redko se vidi tako malo uporabljen stroj. Kjdpfxeyvhcfo Adkolp Iščete skoraj nov štiristranski skobeljni stroj s 4 delovnimi vreteni, vendar nimate proračuna za novega? Potem je ta Unimat 300 prava izbira za vas!

Stanje: rabljeno, Leto izdelave: 2007, from training workshop, public institution, chrome-plated stops and machine table used, excellent condition, low operating hours, high-end specification Manufacturer: Weinig Model: Unimat 300 Year of manufacture: 2007 Number of spindles: 5 Spindle arrangement: bottom-top-right-left-top Klodpfovwghkjx Adkep Motor brakes Planing width approx. 20–230 mm Planing height approx. 8–160 mm Spindle diameter: 40 mm Table length approx. 2000 mm Pre-cutter Pneumatic roller pressure Protective hood Table lubrication with lubricating pump Infeed before jointer Feed speed steplessly adjustable: 5–30 m/min Profiling D 125–200 mm Electric adjustment of thicknessing unit Digital displays complete, incl. for profiling Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee

Stanje: zelo dobro (rabljeno), Four-sided planer Weinig Profimat 23 Working width: 230 mm Working height: 120 mm Number of spindles: 6 Bottom spindle: 4 kW Right spindle: 7.5 kW Left spindle: Top spindle: 7.5 kW Klodev Ealrjpfx Adksp Bottom spindle: 4 kW Universal spindle: 5.5 kW Spindle diameter: 40 mm Feed speed: 24 m/min Pneumatic feed roller pressure Electric adjustment of feed rollers Drive via cardan shafts CE certificate

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina: 230 mm, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 230 mm, delovna višina: 170 mm, moč pogonskega motorja podajalnika: 5.500 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, premer gredi skobeljnika: 40 mm, vrsta vhodnega toka: trifazni, število vreten: 9, moč: 95 kW (129,16 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, Four-side planer Weinig Unimat 23 Lamella Machine 9 spindles, grooved bed working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5.5 kW / 6 – 36 m/min, spindle arrangement: 1-bottom (5.5 kW) 2-right (5.5 kW) 3-left (5.5 kW) 4-right (5.5 kW) 5-top (11 kW) 6-bottom (5.5 kW) 7-top (7.5 kW) 8-bottom (37 kW) 9-universal (11 kW) Kjdpfx Ajx Hkp Nsdkslp 5 powered rollers in the table

Stanje: rabljeno, Stanje nastavitve za Weinig Powerlock Klsdsxga Ewspfx Adksp

Stanje: rabljeno, Stanje nastavitve za profil Weinig Powerlock Kodpfx Aexga Eqedkelp

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: nepreverjeno, Weinig RS 2000 Kedpjwmw Daefx Adkslp

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, premer vretena: 40 mm, širina skobljanja: 230 mm, delovna višina: 120 mm, največja hitrost vrtenja: 6.000 obr/min, Oprema: kabina, Tipi: Profimat 26, št. stroja: 100272, leto izdelave: 2003, 5 vreten: spodaj-levo-desno-zgoraj-spodaj. Delovna širina: 20-230 mm. Delovna višina: 8-120 mm. S povratnim transporterjem Ahtue Neumann. Klodpfx Adjyq Ab Rsksp

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Nice machine in good condition due to coming from a small business, with low operating hours. Klsdpfxeu S Afcj Adkjp Comes with IV 68 tool. Still set up and ready for demonstration on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Planing and Moulding Machine WEINIG Powermat 700 Year of manufacture: 2020 Tool configuration 018 (b-t-r-t-t-b)* 1st spindle bottom: 7.5 kW, 6,000 rpm 2nd spindle right: 15 kW, 8,000 rpm 3rd spindle left: driven together with right spindle, 8,000 rpm 4th spindle top: 11 kW, 8,000 rpm 5th spindle top: 7.5 kW, 8,000 rpm 6th spindle bottom: 7.5 kW, 8,000 rpm Feed drive: 5 kW Feed speed stepless: 5 – 40 m/min Total connected load: 56.5 kW Equipment: - Comfort Set - Electronic digital readouts - Rebating unit - MarathonCoating for table insert in front of 1st spindle - Fence lip after right spindle with quick adjustment - Overhead pressure roller opposite right spindle, swivelling and spring-loaded - Reduced roller gap opposite the right spindle - Extension of pendulum axis opposite left spindle up to 150 mm - CNC control for adjustment of dimension (thickness and width) - Split pressure shoes before 1st and 2nd top spindles Kodpfx Adoyh Rhwskelp - Frequency inverter for smoother motor start and stop - Infeed roller before 1st bottom tool pneumatically height-adjustable - Climate control unit for control cabinet - Short infeed table, 1.20 m long, with 2 powered rollers above the table and 1 powered roller integrated in the table - MemoryPlus with 10.1 inch touchscreen *Legend for spindle positions: u = unten (bottom), r = rechts (right), l = links (left), o = oben (top)

Stanje: dober (rabljeno), Leto izdelave: 1966, Omejevalnik za rezkalni stroj z natančno nastavitvijo Vrtliva miza Prečna žaga Podaljšek mize Aigner z dovajalno napravo Holz-Her ETZ, 8 hitrosti 380 Voltov Kjdpfxox U Dfgo Adkolp

Stanje: zelo dobro (rabljeno), Dolžina 245 mm Širina 245 mm Višina 1090 mm Kljdpfx Aoylcpdodkjp Ključni preklopnik Weinig s stabilnim podstavkom in kablom.

Stanje: rabljeno, Number of machines: 9 units. Wooden window production line for sale on behalf of the customer. Machines can be viewed while still in operation. Sale includes machines as well as tools and programming for the manufactured systems. Incl. production of angled windows and arched windows. Item 1: Weinig Powermat 500, year 2010, window version ----- - 6 spindles, 5 x PowerLock - 8,000 rpm - large PowerCom controller - Spindles 2, 3, 4 axis CNC-controlled - Spindles 2, 3, 4, 5 radial CNC-controlled - Window package for glazing bead cutting: pneumatic cycling of right and top spindles for bead cutting - incl. existing Leitz planing and bead tools - in line with Maweg single timber sanding machine Saturn Duo, year 1985, as well as return conveyor system for workpieces Item 2: SCM Windor 40 R window line, year 2006 ----- - 2 long slot spindles, CNC-controlled - Optima 16: drilling units for end and longitudinal drilling - ROTATEN: angled window device - 3 long profile spindles, CNC-controlled + unit from above and below - sash transfer trolley for small sashes - workpiece return - incl. Leitz window and door tools - incl. separate OKOMA UF 3 rebate milling machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year 2018 ----- - gantry machine, 5-axis Drive 5C+ with 15 kW - overhead laser - working area 4200 mm length, 1350 mm depth - disc tool changer 32 positions - linear tool changer 8 positions - fixed drilling head 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - connection for PowerCLamp clamps, 8 pcs. - approx. 30 vacuum clamps - 4 x PowerCLamp clamps - WoodWop - chip conveyor - various small solid wood clamps, used for box windows - incl. Leitz tools for Homag with arch window production - incl. Barbaric vacuum lifter, year 2015 Item 4: Löwer MZP 1 mini dovetail press ----- - for arch window production Kodpfxeyclwxo Adkslp Item 5: S+S frame press type Bavaria 200 L, year 2014 ----- - working area 4000 x 2600 mm - with center pressure beam and cross pressure device - motorized width adjustment - basic equipment for counter profiles - angled window control - oscillating pressure plates + extension for pointed windows - intermediate inserts for small size pressing - various supporting plates for counter profiles and counter profiles Item 6: Striffler sash hardware table ----- - with automatic screwdriver and screw feed - hardware shelf - punch for Roto hardware Item 7: Tools ----- All tools belonging to the machines for the wood + wood-aluminium systems IV 72 + 92 mm as seen in the PDF: - windows - lift-sliding doors - arch and angled windows - box windows - entrance doors in many variants - putty rebate variants - ... Sale of the tools in their current condition, scope, and with accessories as existing. Note on window sections, tool drawings, tool system listings: Engelfried GmbH does not provide any warranty that the actually available tools correspond with the systems listed and depicted.

Stanje: rabljeno, Cena: Na zahtevo - Posebnosti: - Opis: Vključuje: Približno 260 skobeljnih glav, 5 žagarskih agregatov, 70 rezkalnih glav (Spinner) in vse nože na policah na steni - Dokumentacija na voljo: Ne - CE certifikat prisoten: Ne Finančne informacije DDV: Navedena cena je brez DDV DDV/obračun po razliki: DDV je odbiten za podjetja Klodpfx Adjytcvasksp Dostava in odkup je možen kadarkoli za vso industrijsko opremo Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2004, skupna širina: 800 mm, skupna dolžina: 1.200 mm, skupna višina: 900 mm, Lastna teža: 100 kg Cena: po povpraševanju - Leto izdelave: 2004 - Dokumentacija na voljo: Ne - CE certifikat na voljo: Ne - Serijska številka: 102851 - Transportne mere: 1200mm x 800mm x 900mm (d x š x v) - Transportna teža [kg]: 100 kg - Število transportnih paketov [kos]: 1 Kledpsytbl Hofx Adkop Finančne informacije DDV: Navedena cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in možnost odkupa možna kadarkoli za vse iz industrijskega področja. Lukas van Rossum

Stanje: rabljeno, Leto izdelave: 2006, skupna višina: 1.600 mm, skupna dolžina: 1.300 mm, skupna širina: 1.500 mm, Lastna masa: 900 kg Cena: po dogovoru Kjdpfjytbc Sox Adkelp - Leto izdelave: 2006 - Dokumentacija na voljo: Ne - CE-certifikat: Ne - Serijska številka: 108088 - Moč motorja: 1,0 kW - Transportne mere: 1300 mm x 1500 mm x 1600 mm (d x š x v) - Transportna teža [kg]: 900 kg - Št. transportnih paketov: 1 Finančne informacije DDV: Cena je navedena brez DDV DDV/diferencirano obdavčenje: DDV odbit za podjetja Dostava in prevzem v račun možna kadarkoli za vse iz industrijskega področja Lukas van Rossum

Stanje: rabljeno, Leto izdelave: 2010, skupna višina: 1.500 mm, skupna dolžina: 1.200 mm, skupna širina: 1.300 mm, Lastna teža: 1.000 kg Cena: Na zahtevo - Leto izdelave: 2010 - Dokumentacija na voljo: Ne - CE certifikat: Ne - Serijska številka: 114858 - Transportne mere: 1200mm x 1300mm x 1500mm (d x š x v) - Transportna teža [kg]: 1000 kg - Transportni paketi [kos]: 1 Finančne informacije Klsdpfxjyr Rn Ie Adkjp DDV: Navedena cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse iz industrijskega področja. Lukas van Rossum

Stanje: rabljeno, Leto izdelave: 2004, skupna višina: 1.600 mm, skupna dolžina: 1.250 mm, skupna širina: 1.400 mm, Lastna teža: 900 kg Cena: Po dogovoru - Leto izdelave: 2004 - Dokumentacija na voljo: Ne - CE certifikat prisoten: Ne - Serijska številka: 102850 - Moč motorja: 1,0 kW - Transportne mere: 1250 mm x 1400 mm x 1600 mm (d x š x v) - Transportna teža [kg]: 900 kg - Št. transportnih paketov: 1 Finančne informacije DDV: Cena je navedena brez DDV DDV/obdavčitev na razliko: DDV je odbit za podjetja Dostava in odkup možna kadarkoli za vso industrijsko opremo Lukas van Rossum Klodoyr Rnzopfx Adkop

Stanje: zelo dobro (rabljeno), CATALOGUE NUMBER 6575 TECHNICAL DATA - Max. working width: 230 mm - Max. working height: 170 mm - 7 spindles: 1) Lower horizontal spindle: 230 mm, 11 kW 2) Right vertical spindle: 170 mm 3) Left vertical spindle (spindles 2 & 3): 11 kW 4) Right horizontal spindle: 170 mm, 5.5 kW 5) Top horizontal spindle: 230 mm, 11 kW 6) Lower horizontal spindle: 230 mm, 7.5 kW 7) Universal spindle: 230 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, right/left - Spindles 3 and 5 electrically adjustable - ATS system - Spindle diameter: 40 mm - Electric brakes - Top feeding: 4 geared infeed rollers (incl. 1 double), 1 double rubber infeed roller, 1 double rubber outfeed roller - Bottom feeding: 2 smooth steel feed rollers, 1 double rubber feed roller - Feed on Cardan shafts - Pneumatic pressure on feed rollers - Variable feed speed adjustment: 6–24 m/min - Feed motor: 5.5 kW - Electric thickness adjustment - Table lifting motor: 0.55 kW - Centralised table lubrication - Extraction ports diameter: 7x140 mm - Dimensions (LxWxH): 5800 x 2050 x 1850 mm - Weight: approx. 4500 kg Kjdpjyr Ry Dofx Adkjlp FEATURES – German-made, WEINIG brand – 7-head planer – Universal spindle – Equipped with ATS – Suitable for both wet and dry wood – Used planer in very good condition Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at exchange rate 4.2 PLN/EUR (Price may change subject to significant exchange rate fluctuations)