Weinig Opticut nakup rabljenega (468)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Težka večlistna žaga Raimann. Širina verižnega ležišča 500 mm. Uporabna vpenjalna dolžina žagastih puš 570 mm. Višina reza 120 mm. Pogonski zgornji valji. Električna nastavitev pritisne letve. Veriga s konicami. Proti-ležišče. Brezstopenjski hidravlični pomik od 0 do 50 m/min. Pogonski motor 75 kW s pnevmatsko napenjalno postajo. 2 kosa žagastih puš. Zaščitne naprave. Električna krmilna omara. itd. Nameščenih nekaj novih delov. Bsdpfx Aboxtwvtoxeww

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Unicontrol 12 Includes: Cross-cutting unit (Pos. A), Tenon and slot spindle (Pos. C), Transfer belt (Pos. I), Profiling spindle (Pos. L), Profiling spindle (Pos. N), Vertical profiling unit right (Pos. P) For the production of individual parts and elements in frame-based or serial manufacturing processes. Consists of a cross-processing unit and a longitudinal processing unit, connected by a transfer belt. Working width: 40–140 mm (see pressure guide left 40–140 mm) Working height: 40–120 mm Workpiece length min.: approx. 275 mm + 1 x end profile length Longitudinal processing: approx. 220 mm + 2 x end profile length Workpiece length max.: 3500 mm Workpiece dimensions are dependent on machine configuration, manufacturing method, and tool assignment. Final definition of the part dimensions is only possible after receipt, review, and approval of the complete and finalized tool layout drawings. Cross-machining: Table feed motor power: 0.3 kW (0.4 HP) Pre-set feed speed during cutting, profiling, and return: 3–25 m/min Bsdpfsumci Ssx Abxsww Vario table with (studio window production possible) The clamping length of all tenon and slot spindles can be used without tool changeover slots. Workpiece clamping by means of a clamping bridge. Operated by clamping cylinders mounted under the table. Length stop NC controlled, mounted on the slotting table. Studio window device swivel angle max.: +/- 75° The minimum workpiece length for angled windows depends on the angle and the wood width. Possible part dimensions when manufacturing angled windows: Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60°, only counter-processing is possible. Commission not documented. 1) NC angle adjustment automatic for angled part processing Tear-out protection via follow-up counter over the complete spindle length of the tenon and slot spindle for 90°processing. Manually adjustable counter wood strip for angled part processing. 2) Additional counter woods

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), Stroji WEINIG POWERMAT 1200 je bil proizveden leta 2014. Robustni stroj za obdelavo lesa omogoča delovno širino 20-230 mm in višino 10-160 mm, s podajalno hitrostjo od 6 do 36 m/min. Vključuje 8 skobeljnih vreten s premerom 40 mm in ima le okoli 5500 delovnih ur. Izkoristite priložnost za nakup tega stroja WEINIG POWERMAT 1200. Kontaktirajte nas za več informacij. Bedpfx Aoxrwmcobxoww Vrste uporabe Rezkanje (les)

Stanje: rabljeno, Leto izdelave: 2004, Planer and Moulder Weinig Powermat 2000 PowerLock Technical Data Working width: 30 - 300 mm Working height: 19 - 200 mm First Lower Spindle Motor with brake: 18.5 kW Speed: 8000 rpm Cutterhead diameter: 125 - 180 mm 2nd Spindle First right spindle Motor with brake: 15 kW Cutterhead diameter: 93 - 200 mm 3rd Spindle Bedpfeunbrbox Abxeww First left spindle Motor with brake: 15 kW Cutterhead diameter: 93 - 200 mm 4th Spindle First upper spindle Motor with brake: 37 kW Cutterhead diameter: 93 - 200 mm 5th Spindle Second lower spindle Motor with brake: 22 kW PowerLock tool holder Speed: 8000 rpm Cutterhead diameter: 93 - 225 mm Feed System Frequency-controlled feed, infinitely adjustable: 6 - 36 m/min

Stanje: rabljeno, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig four-sided planer Profimat 23 window version with glazing bead separation or can be used as a grooving spindle. ATS control and program control ----- In 2024, the machine was factory-refurbished by Weinig. Technical data summary (possibly including additional accessories – please inquire) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically activated up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatic up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional features ----- > Glazing bead separation or usable as grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with memory for 99 programs > Machine operation: window package Combined control of the right spindle and glazing bead separator via manual selector switch on the control panel > Spindles with mechanical digital display (technical data as per manufacturer – subject to confirmation!) Bodpfxjxpn T Ue Abxeww

Stanje: rabljeno, Leto izdelave: 1971, obratovalne ure: 4.348 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 462-1717, Rabljeni profilirni stroj Weinig PFA 17N, proizvajalec: Michael Weinig KG, Tauberbischofsheim (Nemčija), tip: PFA 17N, letnik 1971, serijska številka: 462-1717, 7 vreten (med drugim univerzalno vreteno), premer vretena: 40 mm, moč motorjev cca 3–5,5 kW na vreteno, maks. širina skobljanja: cca 170 mm, maks. višina skobljanja: cca 120–140 mm, podajanje nastavljivo, masa cca 3.500–4.000 kg. Stroj je rabljen in v skladu s starostjo. Bwjdpfx Ajxlacmjbxsw

Stanje: rabljeno, Avtomatski stroj za skobljanje in profiliranje Weinig Hydromat 23 za štiristransko skobljanje in profiliranje lesa in tramov z visokim pomikom ter 4 pogonskimi valji v mizi. Vreten: 8 Delovna širina: 230 mm Delovna višina: 160 mm Vreteno 1: Spodaj / 11 kW / 50 mm Vreteno 2: Desno / 11 kW / 50 mm Vreteno 3: Levo / 11 kW / 50 mm Bwodpfx Abexp Hqljxjw Vreteno 4: Desno / 7,5 kW / 50 mm Vreteno 5: Zgoraj / 11 kW / 50 mm Vreteno 6: Spodaj / 18,5 kW / 50 mm Vreteno 7: Zgoraj / 7,5 kW / 50 mm Vreteno 8: Spodaj / 7,5 kW / 50 mm Pomik: maks. 60 m/min // 11 kW // Hidravlični Dobavni rok: na zahtevo

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hydraulic feed unit for Weinig Hydromat. Feed speed: 8–60 m/min. Bwsdpfx Aev Er Ufsbxsw

Stanje: dober (rabljeno), Leto izdelave: 1974, old but sturdy cast-iron planer Bjdpfjturkyex Abxoww planing width: 50 cm table length: 250 cm two-knife cutterhead

Stanje: rabljeno, Leto izdelave: 1996, Weinig Hydromat 23 Technical data Bedpfx Abjqrt Ekoxeww Working width: 30 - 230 mm Working height: 19 - 200 mm Spindles: bottom, right, left, top, bottom b-r-l-t-b (bottom-right-left-top-bottom) without feed machine only Machine is dismantled, immediately available Transport can be arranged

Stanje: rabljeno, Working width: 230 mm Working height: 15-120 mm Number of spindles: 2 pcs. Weinig Hydro Planing Machine Type Uniplan 23 ----- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal wood processing with 2 working spindles. Spindle arrangement: horizontal bottom and top. The two horizontal spindles are equipped with hydraulically clamped counter-bearings, without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, can be operated remotely with the guard closed. Machine with continuous, chainless feed, fitted with rubber rollers. Electric height adjustment of the spindles based on mechanical digital display (SIKO). Limit switch for restricting height adjustment. Feed roller pressure is pneumatic. Stops and table plates are non-adjustable. Machine features steel table plates. Machine with full enclosure and integrated noise and dust protection, including interior lighting. Electrical equipment according to DIN VDE 0113, electrical equipment for industrial machinery EN 60204, IEC - 204 - 1. No further electrical regulations considered. Machine includes operating tools, but no processing tools. The spindles of the Weinig Uniplan operate at a speed of 7,200 revolutions per minute. Please check before use if your existing tools are suitable for this speed. Please also consider this when ordering new tools. Technical Data Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed motor: 3 kW (4 HP) Horizontal spindles each: 7.5 kW (7.5 HP) Bjdpfx Abexpn Tzjxoww Feed speed, infinitely variable: 6 - 36 m/min Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool diameter: 163 mm Fixed material removal lower spindle: 0.5 mm (Technical data according to manufacturer – no guarantee!)

Stanje: rabljeno, Weinig Profimat 22 with 4 left mobile units, equipped with a measuring sensor for automatic adjustment based on the width of the workpieces being processed. Bwjdpfxoryb D So Abxsw Dimensions and weight: 330 x 145 x H160 cm. Weight: 1,400 kg (on pallet).

Stanje: rabljeno, Leto izdelave: 2014, Avtomatski štiristranski skobeljni in profilirni stroj Weinig Powermat 600 za obojestransko skobljanje in profiliranje lesa. Vretena: 5 Leto izdelave: 2014 Delovna širina: 230 mm Delovna višina: 160 mm Vreteno 1: Spodaj // 7,5 kW // 40 mm Vreteno 2: Desno // 11 kW // 40 mm Bwjdoxpvdzjpfx Abxow Vreteno 3: Levo // skupni motor s vretenom 2 // 40 mm Vreteno 4: Zgoraj // 7,5 kW // 40 mm Vreteno 5: Spodaj // 5,5 kW // 40 mm

Stanje: potreben popravila (rabljeno), Leto izdelave: 2010, Funkcionalnost: nefunkcionalno, hitrost pomika os X: 120 m/min, vhodna frekvenca: 50 Hz, For sale is a mechanization system from Weinig, consisting of: Weinig 811, Weinig 820, Bsdpfxsv Skayo Abxjww Weinig 814, Weinig 811, Weinig 806.

Stanje: rabljeno, Leto izdelave: 1962, Rabljeni stroj Leto izdelave: 1962 Oprema in tehnični podatki: Širina skobljanja: 630 mm Delovna višina: 250 mm Dolžina mize: 1100 mm Priključek za odsesavanje: 160 mm Rezila: 4 segmentna skobeljna rezila Stroj nima motorne zavore! Lokacija: Flörsheim Bedpfx Aow Sbbrebxsww Razpoložljivost: takoj

Stanje: rabljeno, Weinig Unimat 23 Technical data Working width: 30 - 230 mm Working height: 19 - 200 mm mounted on a pedestal u- re-li-o-u.o Without feed unit machine only The machine is dismantled and immediately available Bodpfx Absncc Igjxoww Transport can be arranged

Stanje: rabljeno, Število vreten: 8 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Weinig skobljalna linija ----- Sestavljeno iz naslednjih posameznih strojev: Poz. 1: Weinig Profimat 23 E, štiristranski skobeljni stroj, številka zaloge: 2803 5 vreten + žaga za steklene letve Poz. 2: Weinig Uniplan 23, številka zaloge: 2804 Fini in hidro skobeljni stroj z 2 horizontalnima vretenoma Poz. 3: Weinig RF 15, številka zaloge: 2805 Bjdpfx Abjxpn Tuexjww Vzdolžno-prečno-vzdolžni transporter z vračanjem obdelovanca k operaterju Podrobni opisi strojev so na voljo pod navedenimi številkami zaloge. (Tehnični podatki po navedbah proizvajalca, brez jamstva!)

Stanje: generalkompletno obnovljen (rabljeno), Weinig moulder, model 22A Unimatic Working table width: 220 mm, with grooved table for short workpieces. Bedpfx Aju Sr Ddsbxjww Cardan shaft feed system. Motor configuration and power ratings: Bottom spindle: 5.5 kW Right spindle: 5.5 kW Left automatic spindle (movable spindle): 5.5 kW Right spindle: 5.5 kW (note: appears twice, clarify if two right spindles) Top spindle: 5.5 kW Bottom spindle: 5.5 kW (listed again, please confirm total number of spindles) Feed motor: 4 kW Hydraulic unit for left automatic spindle: 0.9 kW The left movable spindle automatically adjusts according to the width of the inserted workpiece.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, premer vretena: 40 mm, Spindle for thickness planer Bedpfx Abjt Uvz Rexjww

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), Dimter Optimizing Crosscut Saw 350 with increased working height 1400 mm Cross feed as shown in pictures Crosscut saw Control cabinet Scanner interface Sorting line 6500 mm length with 3 pushers Waste flap Machine has already been dismantled and is immediately available Machine was fully functional until dismantling Bwodpjncc Icofx Abxjw Transport can be organized

Stanje: rabljeno, Delovna dolžina: 3600 mm Delovna širina: 1500 mm Delovna višina: ca. 900 mm WEINIG povratni transportni sistem RF15 Uporabno za stroji za profiliranje, skobljanje in rezkanje z največjo podajalno hitrostjo ca. 22 m/min. Bwodpfxjxpn Tnj Abxew Tehnični opis: Dolžina obdelovanca: 250 - 3.600 mm Širina obdelovanca: 30-230 mm Vzdolžno-prečno-vzdolžni transporter z 2 integriranima, pogonskima valjčnima progama: Prečna transportna dolžina: 1.500 mm Konstantna transportna hitrost: 30 m/min Dolžina valjčne proge: 2.200 mm Nepogonska povratna valjčna proga do operaterja (Tehnični podatki po navedbah proizvajalca - brez garancije!)

Stanje: rabljeno, Four-side planer, Weinig brand, model Unimat U17N with 7+1 spindles, spindle length 170 mm, equipped with fluted table and cardan shaft feed. Spindle configuration: Bjdpfx Abspfp Elsxoww Bottom, right, left, right, top, bottom, left, universal. Spindle motor power: 4+4+5.5+5.5+7.5+5.5+5.5+7.5 kW. Feed motor power: 4 kW, raise and lower: 0.75 kW.

Stanje: rabljeno, Grooving spindle 1 pc. Bwedpsw I Ea Defx Abxsw Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 window production line ----- For sale on behalf of customer Manufacturer description: Designed for the production of individual parts, elements, and small series. Spindle arrangement: - One cross-cut saw - One single-sided tenoning and grooving spindle - One right-hand profiling spindle - One tenoning/grooving spindle and profiling spindle designed to hold multiple tools arranged vertically, with pneumatic spindle movement. Grooving table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit, manual height adjustment of the feed. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for frame or sash outer dimensions. Control of tool positions (longitudinal and cross processing) via selector switch on the control panel. Technical Data ----- Cross-cut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor: 3 kW Tenoning and grooving spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 232 mm Motor: 11 kW Special equipment: Climb-cut spindle ----- Pneumatically cycled forward/backward for tear-free machining of window sashes, frames and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, minimum tool diameter: 112–140 mm, Max. tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for climb-cut spindle from 4 kW to 7.5 kW Screen control for 99 window types; 1 type can contain up to 8 different parts each with 2 end profiles and 2 longitudinal profiles. Production options: individual parts, double parts, by frame, by batch, milling around. Data input via keyboard with integrated operator guidance and fault diagnosis. 1 top-mounted grooving spindle ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Clamping length: 13 mm Total clamping length: 40 mm Axial positions: 2 Radial positions: 2 Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 to 3 kW 1 hardware milling unit, right: ----- For milling the hardware groove in the end milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool diameter range: min. 140 mm, max. 180 mm Home position below table level: 10 mm Hardware milling unit, custom version: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial positions: 2 Motor upgrade for hardware milling spindle from 2.2 to 3 kW Hardware milling spindle for 230 mm tool diameter in and above the table Electric height adjustment of the feed with selector switch on the control panel for 2 timber thicknesses, incl....

Stanje: rabljeno, Profiling machine by Weinig, model PFA17N, ribbed table, 8 spindles (bottom 4 kW, right 4 kW, left 5.5 kW, right 4 kW, top 5 kW, bottom 4 kW, universal 4 kW, universal 4 kW), used. Bedok N I I Nspfx Abxsww

Stanje: rabljeno, Tenoning spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC controlled radially and axially ---- The machine was factory-refurbished by Weinig in 2024. As part of this, the control system was replaced with a Siemens S7 677 C, including a new “Touch” membrane panel. With the following machining units: Crosscut saw ---- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatic, 8 positions for top edge rounding Bwedpfxoxpi Due Abxew Bottom-mounted unit for edge rounding ---- axial adjustment shared with crosscut saw Haunching and tenoning spindle ---- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm min. tool cutting circle 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial traverse path 580 mm adjustment speed 100 mm/sec. 1st profile spindle (climb and conventional milling) ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit, top ---- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit, right, at machine outfeed ---- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional accessories ---- CNC-controlled length stop, mounted on the tenoning table for lengths up to 3,500 mm, including crosscut saw integrated into the control system. Studio window facility, swivelling ±60° Double workpiece package with automatic separation and transfer Climb milling facility with window automation for rabbetting Rabbetting carriage for small sash widths Climate control unit in electrical cabinet PC control NEXUS Automatic turning system Lamella conveyor including return belt for return of workpieces to the operator (specifications as per manufacturer's information – subject to confirmation).