Opticut nakup rabljenega (39)

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Lsdpfx Adjw Sy T Hskehd Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Optimizing cross-cut saw from 2018. This WEINIG DIMTER Opticut S90 is equipped with a 500 mm saw blade diameter and a maximum cutting height of 120 mm. It is suitable for infeed lengths of 400 to 6,300 mm and widths of 20 to 300 mm. If you are looking for a high-quality cutting machine, consider the WEINIG DIMTER Opticut S90 we have for sale. Contact us for further details. • Saw Blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40-100% via frequency converter • Workpiece Capacity • Infeed length (min/max): 400-6,300 mm • Width (min/max): 20-300 mm • Thickness (min/max): 10-120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max. 2 mm/m or 8 mm over the entire length • Table tilt: 10° • Movement and Accuracy • Positioning speed (return stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and Power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical power: approx. 15 kW • Control and Interface • Control unit: OptiCom Pro with 18.5" touchscreen • Display resolution: 1366 x 768 pixels • Degree of protection (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Operating Resources and Environment Lhjdpfsylmmmex Adkjd • Voltage: 400 V / 50 Hz • Operating pressure: 6-8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction nozzle: Diameter 125 mm • Required extraction performance: Speed approx. 30 m/s; Volume approx. 1,300 m³/h • Noise level (idle): ≤ 85 dBA

Stanje: dober (rabljeno), Leto izdelave: 2005, Prodajam avtomatsko pnevmatsko žago Weinig Grecon Dimter Opticut 200 Elite, letnik 2005. Moč motorja: 7,5 kW Samodejna vstopna miza: 5,10 m (pretočni sistem) Samodejna izstopna miza 6 izmetalcev na levi izstopni mizi. Lhodpfxoxtxg Hs Adkod Optimizacija z avtomatsko zaznavo napak in avtomatskim programiranjem rezalnih shem. Na voljo takoj. CE oprema. Dokumentacija vključena.

Stanje: rabljeno, Leto izdelave: 2001, Električna omara Dimter OptiCut 602R Lsdpfx Ajxp Uxwjdkshd Na voljo električne sheme Na voljo seznam delov

Stanje: rabljeno, Leto izdelave: 2003, skupna višina: 1.600 mm, skupna dolžina: 11.250 mm, skupna širina: 800 mm, Poids : 2 000 kg Prix : Sur demande Lhsdpfx Adoyu Sgqjksd - Année de fabrication : 2003 - Documentation disponible : Non - Marquage CE présent : Oui - Certificat CE disponible : Non - Numéro de série : 1490.14 - Puissance moteur principal [kW] : 5,5 - Longueur max. de la lame de scie [mm] : 6100 - Largeur max. de coupe [mm] : 350 - Hauteur max. de coupe [mm] : 140 - Diamètre max. de la lame de scie [mm] : 500 - Diamètre de l’arbre de la lame [mm] : 35 - Longueur de la table d’entrée [mm] : 7850 - Longueur de la table de sortie [mm] : 2400 - Options : Système d’avance automatique - Tension [V] : 400 - Fusible [A] : 25 - Puissance [kW] : 8,0 - Dimensions de transport : 11250mm x 800mm x 1600mm (L x l x h) - Poids de transport [kg] : 2000kg - Nombre de colis de transport : 3 Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de la marge : TVA déductible pour les professionnels Livraison et reprise possible à tout moment pour tout équipement industriel Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2003, skupna višina: 1.500 mm, skupna dolžina: 11.250 mm, skupna širina: 900 mm, Poids : 1 500 kg Prix : Sur demande - Année de fabrication : 2003 - Documentation disponible : Non - Certificat CE présent : Non - Numéro de série : 1344.14 - Puissance moteur principal [kW] : 5,5 - Longueur max. de la lame de scie [mm] : 6100 - Largeur max. de coupe [mm] : 350 - Hauteur max. de coupe [mm] : 110 Lsdpfx Aoyrggtodkshd - Diamètre max. de la lame de scie [mm] : 500 - Longueur de la table d’introduction [mm] : 7850 - Longueur de la table de sortie [mm] : 2400 - Options : Système d’avance automatique - Tension [V] : 400 - Fusible [A] : 25 - Puissance [kW] : 7,0 - Dimensions de transport : 11250 mm x 900 mm x 1500 mm (L x l x h) - Poids de transport [kg] : 1500 kg - Colis de transport [qté] : 3 Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de la marge : TVA récupérable pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement industriel Glenn Smeets

Stanje: rabljeno, Premer vretena 125 mm x-pomik 2000 mm y-pomik 1100 mm z-pomik SK 50 mm Vreteno Philips 2500 Digitalni prikazovalnik Philips Hitrost vrtenja 925 vrt/min Lhedeyt R Anopfx Adked Hod vretena 800 mm Miza 1000x1400 mm Tehnični podatki so podatki proizvajalca oz. upravljavca in zato zavezujoči za nas le pogojno. Pridržujemo si pravico do predhodne prodaje; veljajo izključno naši poslovni in prodajni pogoji. O nas več kot 400 lastnih strojev na zalogi preko 15.000 m² skladiščnega prostora, zmogljivost dvigala 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali svoje podjetje, nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi možni po dogovoru. Veselimo se vašega obiska. Vaša Markus Hirsch ekipa

Stanje: rabljeno, Leto izdelave: 2004, Maksimalna širina reza: 700 mm Maksimalna višina reza: 120 mm Maksimalni premer žaginega lista: 700 mm Avtomatska optimizacijska kapna žaga (potisna žaga) Dimter tip OptiCut 700 za kapanje zelo širokega lesa po napakah (fluorescenčna kreda) in dolžinah. Vhodna dolžina: maks. 5.500 mm Lhedpfx Adex Eblvsked

Stanje: rabljeno, Leto izdelave: 2022, Višina reza 260 mm Motor žage 7,5 kW Premer žaginega lista 500 mm Maks. podajanje 250 m/min Optimizacijska prečna žaga Weinig tip OptiCut 260 za samodejno kapanje lesa glede na napake (fluorescenčna kreda) in dolžine. Ločena merilna postaja zaznava dolžine in označbe: Transportni trak: 7,5 m Vhodna debelina: 12 – 80 mm Vhodna dolžina: 400 – 6300 mm Označevalna postaja: 5.000 mm Krmiljenje: OptiCom Pro Ljdpfx Adex Ditfjkehd Ciklus: pribl. 1 sek

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 926 h, skupna višina: 1.800 mm, skupna dolžina: 11.250 mm, skupna širina: 900 mm, Poids : 1 500 kg Prix : Sur demande Lhjdpfx Asyna Ezjdkjd - Année de fabrication : 2012 - Documentation disponible : Non - Marquage CE présent : Oui - Certificat CE disponible : Non - Numéro de série : 546324 - Heures de fonctionnement : 926 - Puissance moteur principal [kW] : 7,5 - Longueur max. lame de scie [mm] : 7 209 - Largeur max. de coupe [mm] : 300 - Diamètre max. lame de scie [mm] : 500 - Diamètre lame sur arbre [mm] : 85 - Longueur de la table d’alimentation [mm] : 7 850 - Longueur de la table de sortie [mm] : 2 400 - Options : Système d’avance automatique - Tension [V] : 400 - Consommation électrique [A] : 22 - Fusible [A] : 25 - Puissance [kW] : 11,0 - Dimensions de transport : 11 250mm x 900mm x 1 800mm (L x l x h) - Poids transport [kg] : 1 500 kg Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/Régime de la marge : TVA récupérable pour les entreprises Livraison et reprise possibles à tout moment pour tout matériel industriel Yorick Diebels

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Optimizirka Grecon Dimter OptiCut 304R Vhodna dolžina lesa min. 500 mm pri nalaganju na podporno mizo Vhodna dolžina lesa min. 900 mm pri nalaganju na prečni verižni transporter Maksimalna dolžina lesa: 6300 mm Širina lesa min./maks.: 40–200 mm Debelina lesa min./maks.: 15–80 mm Maksimalni preseki lesa: 200×25 mm, 170×50 mm, 80×80 mm, 140×60 mm Premer žaginega lista: 400 x 30 mm Število obratov žaginega lista: 4200 obr./min Maksimalni pomik: 230 m/min Načini rezanja: - rezanje na stalno dolžino - optimizacija dolžine desk za maksimalni izkoristek Ljdpfx Aox Up Nqjdkjhd - odstranjevanje napak v lesu z označevanjem defektov s kredo

Leto izdelave: 1970, stanje: pripravljen za uporabo (rabljen), Na voljo je horizontalni vrtalno-rezilni stroj Scharmann. Premer vretenaste puše: 120mm, hodi X/Y/W: 1600mm/1600mm/600mm, število vrtljajev: 1000/min, dimenzije mize X/Y/Z: pribl. 1200mm/1400mm, maks. obremenitev mize: 6000kg, premer stebra: 220mm, rotacija mize: 360°, hitro pomikanje: 380mm/min, podajalna hitrost: 2400mm/min. Dimenzije stroja X/Y/Z: pribl. 4500mm/2600mm/3000mm, teža: pribl. 17000kg. Na voljo je dokumentacija. Možen je ogled na lokaciji. Lhsdexyk Tljpfx Adked

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Technical specifications: Lhjdpjwtgcxjfx Adkod Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fusing: 25 A Condition: used

Stanje: rabljeno, Leto izdelave: 2002, skupna višina: 1.600 mm, skupna dolžina: 9.000 mm, skupna širina: 2.400 mm, Teža: 2.500 kg Cena: Na zahtevo Lhsdpfsyddkasx Adkod - Leto izdelave: 2002 - Dokumentacija na voljo: Ne - CE certifikat prisoten: Ne - Serijska številka: 1073.14 - Dolžina dovajalne mize [mm]: 8360 - Dolžina izhodne mize [mm]: 2750 - Možnosti: Avtomatski podajalni sistem - Napetost [V]: 400 - Varovalka [A]: 25 - Moč [kW]: 11,0 - Transportne mere: 9000mm x 2400mm x 1600mm (d x š x v) - Transportna masa [kg]: 2500kg - Transportni paketi [kos]: 3 Finančne informacije DDV: Naveden cena je brez DDV DDV/Obdavčitev z razliko: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za stroje iz industrijskega področja Yorick Diebels

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Optimizing Cross-Cut Saw Dimter / Weinig OptiCut 450 Quantum Manufacturer: Dimter / Weinig Model: OptiCut 450 Quantum Year of manufacture: 2006 Machine Description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for fast and precise cross-cutting of wood with yield optimization. The Quantum version is among the most advanced in the OptiCut 450 series, developed for industrial use with very high productivity, precise positioning, and reliable material feed. This machine is suitable for cut-to-length work, defect removal, and production optimization. The OptiCut 450 series is designed for integration with scanners, grading systems, and automated handling equipment. Typical features of the Quantum version include VarioSpeed feed, HighGrip rollers, an independent length measuring system, and servo-controlled waste gate. ([jacks.co.nz][1]) Technical Data: - Capacity: up to approx. 540 cuts/min - Feed speed: approx. 300 – 415 m/min - Maximum workpiece length: approx. 6.3 m - Saw blade diameter: 450 mm - Maximum cutting width: 235 mm - Maximum cutting height: 100 mm - Working height: 900 mm - Motor: 7.5 kW - Air consumption: approx. 1200 NL/min - Cutting accuracy in the OptiCut 450 series: approx. ± 0.8 mm Features / Advantages: - Very high cutting capacity Lsdpsyu Urisfx Adkohd - High positioning accuracy - VarioSpeed system that minimizes gaps between workpieces - HighGrip rollers for secure material feed - Servo-driven waste gate - Can be integrated with scanners and grading lines - Proven Weinig / Dimter technology for continuous production Condition: very good Note: Technical data may vary depending on the machine’s exact configuration, control version, conveyor system, and optional equipment.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Dimter / Weinig OptiCut 350 Cross-Cut Optimizing Saw Manufacturer: Dimter / Weinig Model: OptiCut 350 Year of manufacture: 2004 Machine Description: For sale is a Dimter / Weinig OptiCut 350 cross-cut optimizing saw, year 2004, designed for fast and precise cross-cutting of wood with integrated optimization functionality. The OptiCut 350 model is part of Dimter's high-performance series and is used for cut-to-length applications, defect removal, and yield optimization. Ledpfeyu Uq Ejx Adkshd This machine is suitable for carpentries, sawmills, pallet production, furniture components manufacturing, and industrial wood processing. Depending on configuration, it can include optimization software, automatic infeed, loading stations, and barcode-based optimization. Technical Specifications: - Machine type: cross-cut optimizing saw - Maximum cutting height: approx. 120 mm - Maximum working section: approx. 235 x 12 mm or 120 x 100 mm - Minimum wood width: approx. 30 mm - Maximum feed speed: up to approx. 350 m/min - Continuously adjustable feed: yes - Frequency-controlled cutting speed: yes - Saw motor power: 7.5 kW - Positioning accuracy: approx. 2 mm - Optimization software: yes, depending on version - Barcode optimization: available in some configurations - Loading stations: depending on equipment ([Boedeker][1]) Features and Advantages: - High cutting capacity - Automatic material positioning - Yield optimization capability - Proven Dimter / Weinig technology - Suitable for continuous production - Effective solution for industrial wood processing Condition: Very good Note: Technical data may vary depending on the machine’s exact configuration, optional equipment, table lengths, and control version.

Stanje: rabljeno, Leto izdelave: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Crosscut Saw Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: Infeed lengths min./max. 3,000 – 5,000 mm Infeed widths min./max. 80 – 200 mm Infeed thicknesses min./max. 38 – 80 mm Max. wood cross-section: 200 x 50 mm End product length min./max. 700 – 1000 mm Average number of cuts per board: 5 Wood types: softwood or hardwood Performance data: Feed speed max. 180 m/min, infinitely variable Time per crosscut incl. braking: 0.7 – 1.2 s Component overview: Pos. 1: Infeed conveyor belt in front of the saw Length 1.5 m, linked to the saw’s feed motor Pos. 2: Automatic crosscut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and built-in waste extraction unit Graphical input terminal, 1/4 VGA display, with numeric keypad and function keys, including OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor/sorting station with drive unit, without ejector Belt length approx. 1.5 m The machine is already dismantled and in storage. The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The conveyor table is included, only the rubber belt is missing. Sale on behalf of client, ex location Austria, without transport and assembly Subject to errors in description and price Optional transport and loading by us possible To avoid misunderstandings, an on-site inspection by appointment is possible and recommended Sale in as-is condition Technical data, condition description, year of manufacture and scope of supply according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale No warranty given for used machines; the sale is governed by “purchased as seen” Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Lhjdeu Atmuepfx Adkod Delivery terms: ex location

Stanje: rabljeno, Complete production line for manufacturing slatted frames (bed bases). From wood processing all the way to final assembly/packaging. Includes all components, such as milling machines, saws, profiling machines, forklifts, compressors, etc. The larger machines/systems are from around the year 2000. Consisting of: Solid Wood Side Rail Production - 2 x Multiple-blade saws RAIMANN KR 450 + KS 310 - Optimizing saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling/Finishing Longitudinal Rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC Drilling and Sawing Machines: - KOCH drilling and sawing line with turning and stacking system - ISE CNC drilling and sawing system with stacking unit - 2 x ISE CNC woodworking centers / drilling systems Ledpox S Scbjfx Adkehd - ISE CNC cross rail milling machine - 2 x Manual rail drilling machines Single Machines: - GANNOmat CNC drilling and dowel insertion machine - Panhans spindle moulder - 2 x EiMa double saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combined saw-milling machine - 2 x multi-spindle drilling machines - 2 x belt sanders - Paint spray booth - Various small machines Assembly - Assembly automation for standard slatted frames - End cap pressing machine/line - 14 x pneumatic assembly tables Logistics – Factory Equipment - 3 x LINDE forklifts E16 / E20 - 7 x LINDE high-lift/ electric pallet trucks - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction system for outdoor area - Batch of mesh box pallets + Euro pallets - Racking systems, various Packaging - Shrink tunnel system - Stationary pallet wrapper - Mobile pallet wrapper Goods - Remaining stock of wood/cross rails - Remaining stock of end caps/plastic parts - Remaining stock of various assembly material Many more PHOTOS and detailed DATA available upon request.

Stanje: rabljeno, Leto izdelave: 2000, Complete production line for manufacturing slatted frames (bed bases). From wood processing all the way to final assembly/packaging. Includes all components, such as milling machines, saws, profiling machines, forklifts, compressors, etc. The larger machines/systems are from around the year 2000. Lsdsx S Sb Djpfx Adkjhd Consisting of: Solid Wood Side Rail Production - 2 x Multiple-blade saws RAIMANN KR 450 + KS 310 - Optimizing saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling/Finishing Longitudinal Rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC Drilling and Sawing Machines: - KOCH drilling and sawing line with turning and stacking system - ISE CNC drilling and sawing system with stacking unit - 2 x ISE CNC woodworking centers / drilling systems - ISE CNC cross rail milling machine - 2 x Manual rail drilling machines Single Machines: - GANNOmat CNC drilling and dowel insertion machine - Panhans spindle moulder - 2 x EiMa double saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combined saw-milling machine - 2 x multi-spindle drilling machines - 2 x belt sanders - Paint spray booth - Various small machines Assembly - Assembly automation for standard slatted frames - End cap pressing machine/line - 14 x pneumatic assembly tables Logistics – Factory Equipment - 3 x LINDE forklifts E16 / E20 - 7 x LINDE high-lift/ electric pallet trucks - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction system for outdoor area - Batch of mesh box pallets + Euro pallets - Racking systems, various Packaging - Shrink tunnel system - Stationary pallet wrapper - Mobile pallet wrapper Goods - Remaining stock of wood/cross rails - Remaining stock of end caps/plastic parts - Remaining stock of various assembly material Many more PHOTOS and detailed DATA available upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 700 mm, pogonska enota žage: 15.000 W, moč servomotorja: 11.000 W, Stroj popolnoma obnovljen / kot nov Lsdov Diy Aspfx Adkshd z novo električno napeljavo nov Siemens S7 krmilni sistem Zaključek po naročilu Avtomatska kapovalka z zaznavanjem krede črte Leseni prerezi 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Premer žaginega lista 650/700 mm Podajalna hitrost 120 m/min Motor žage 15 kW Servo pogon SEW 11,00 kW s pretvornikom

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Vhodne dolžine min/maks: 1800 - 6300 mm Širina lesa min/maks: 40 - 300 mm Debelina lesa min/maks: 15 - 120 mm Minimalni lesni prerez: 40 x 15 mm Maksimalne dimenzije paketa: 320 x 140 mm Največja teža obdelovanca: 150 kg Končna dolžina za izmet na sortiranje min/maks: 120 - 2500 mm Lodpfx Ajxygazedkehd Končna dolžina za viličar min/maks: 400 - 2000 mm Največje dimenzije skladovnice (Š x V): 1200 x 1200 mm

Stanje: dober (rabljeno), Leto izdelave: 2006, Prodajam avtomatsko pnevmatsko žago Weinig Grecon Dimter Opticut 200 Elite, letnik 2006. Moč motorja: 7,5 kW Avtomatska vhodna miza 4,10 m (pretočni sistem) Avtomatska izhodna miza 6 izmetalnikov na desni izhodni mizi. Lodpfx Aextxi Ijdkjhd Optimizacija z avtomatskim zaznavanjem napak in avtomatskim programiranjem rezalnih shem. Na voljo takoj. CE oprema. Dokumenti vključeni.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1832.14, hitrost pomika os X: 60 m/min, največja višina reza: 160 mm, največja širina rezanja: 360 mm, skupna dolžina: 1.300 mm, skupna širina: 1.300 mm, TEHNIČNI PODATKI Maks. višina reza: 160 mm Maks. širina reza: 360 mm Maks. hitrost pomika: 60 m/min PODROBNOSTI O STROJU Dimenzije stroja (D x Š x V): 1.300 x 1.300 x 1.700 mm Ledpfxjx Ahc Ao Adkehd Dimenzije vhodne mize (D x Š x V): 7.600 x 2.000 x 1.100 mm Dimenzije izhodne mize (D x Š x V): 6.300 x 2.100 x 1.050 mm OPREMA Podmizna kapna žaga Avtomatski pomik

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, največja hitrost vrtenja: 1.250 obr/min, potovalna razdalja osi X: 850 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 700 mm, model krmilnika: Heidenhain TNC 355, TEHNIČNI PODATKI X-pomik: 850 mm Y-pomik: 1.000 mm Z-pomik: 700 mm Vpenjalo orodja: SK 40 Hitrost: 15 - 1.250 o/min Vretenasta puša: 75 mm PODROBNOSTI STROJA Lhodpoxn I U Njfx Adkod Krmiljenje: Heidenhain TNC 355

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 450 mm, največja višina reza: 100 mm, največja širina rezanja: 245 mm, delovna višina: 100 mm, vrsta vhodnega toka: trifazni, – Year of manufacture: 2001 – Optimization Lhjdpfxewtzrhe Adkjd – Defect cutting (cut-to-length) – The machine is equipped with additional tables, enabling a maximum cutting length of up to 6500 mm (currently set to 3400 mm) – 8 cutting lists TECHNICAL PARAMETERS: – Max. cutting length: 6500 mm (currently 3400 mm) – Min. element length: 300 mm – Max. cutting height: 100 mm – Max. cutting width: 245 mm – Saw blade diameter: 450 mm – Motor power: 9 kW – Max. feed speed: 120 m/min – Acceleration: 10 m/s² – Length and value-based optimization – Pneumatic material hold-down – Five ejectors – Intelligently controlled waste chute – Vario speed system – Total length: 17,500 mm – Transport dimensions (L/W/H): 800 / 245 / 220 cm – Weight: 3,500 kg