Optimizer Weinig Dimter OptiCut S 90

Weinig Dimter OptiCut S 90

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Optimizing cross-cut saw from 2018. This WEINIG DIMTER Opticut S90 is equipped with a 500 mm saw blade diameter and a maximum cutting height of 120 mm. It is suitable for infeed lengths of 400 to 6,300 mm and widths of 20 to 300 mm. If you are looking for a high-quality cutting machine, consider the WEINIG DIMTER Opticut S90 we have for sale. Contact us for further details. • Saw Blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40-100% via frequency converter • Workpiece Capacity • Infeed length (min/max): 400-6,300 mm • Width (min/max): 20-300 mm • Thickness (min/max): 10-120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max. 2 mm/m or 8 mm over the entire length • Table tilt: 10° • Movement and Accuracy • Positioning speed (return stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm Hsdpfx Aboylmmmo Esfd • Motors and Power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical power: approx. 15 kW • Control and Interface • Control unit: OptiCom Pro with 18.5" touchscreen • Display resolution: 1366 x 768 pixels • Degree of protection (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Operating Resources and Environment • Voltage: 400 V / 50 Hz • Operating pressure: 6-8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction nozzle: Diameter 125 mm • Required extraction performance: Speed approx. 30 m/s; Volume approx. 1,300 m³/h • Noise level (idle): ≤ 85 dBA

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Consisting of: - Transfer chain after finger jointing press, foldable - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw Hfedpfx Abewclkye Eed - Conveyor belt for residual wood disposal - Stacking system - Batten magazine is not for sale - Package cross conveyor The machine is in very good condition, very little operating time. The machine is still assembled but immediately available.

Stanje: novo, Leto izdelave: 2024, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, karton, plastika …) ✔ Moč: 18,5 kW ✔ Dolžina rotorja: 870 mm ✔ Premer rotorja: 270 mm Hfjdpfx Abehzlr Io Esd ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 2x19 ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 7 m3/h* ✔ Odprtina za ekstrakcijo: 200 mm ✔ Vsipna odprtina: 1446 x 1565 mm ✔ Dimenzije D/Š/V: 2,15/1,97/2,04 m ✔ Teža: 2050 kg 2 leti garancije ali 2000 delovnih ur

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Hfodpfx Abjd Szf Ns Eed Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety controls Coolant system Protective cover Optional with length measuring system or automatic positioning system Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Stanje: dober (rabljeno), The debarker is perfectly suited for debarking both hardwood and softwood logs. The carriage is made of a heavy-duty steel frame. Equipped with 5 pairs of drive wheels. The milling arm is also built from a heavy-duty steel construction. Hydraulic milling head. 22 kW motor. Hjdjtuyr Ijpfx Ab Esfd The log infeed conveyor shown in the photos is not included in the offer and is available for an additional charge of 25,000 PLN / 5,500 EUR.

Leto izdelave: 1997, stanje: dober (rabljeno), • Working width (mm): 1300 • CSD system Hfedpeidi Ivefx Ab Esd • Cross sanding unit • Longitudinal sanding unit - shoe type • Brushing unit • Ionisation

Leto izdelave: 2005, stanje: rabljeno, HIT mechanisation for KVH and glulam production For components up to 600 mm wide, 300 mm high, and 18 m long Consisting of various components, available individually or as a complete system: Hfodjpiurmepfx Ab Esd - Layer cross pusher - Various cross conveyors - Workpiece roller conveyors - Heavy-duty roller conveyors - 5 lifting tables, each with 2 cross conveyors mounted on transfer carts - Stacking machine - Control cabinets - Roller tracks - Travelling timber crosscut saw with waste disposal system

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Hodswtgcxopfx Ab Eofd Rated power: 11 kW Fusing: 25 A Condition: used

Stanje: rabljeno, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Hsdjv Uq Tljpfx Ab Eofd Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – Semi-automatic under-table crosscut saw Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm When cutting stacked boards, max. height: 100 mm. The framework is fully constructed from thick-walled, reinforced steel with complete surface coating. Sturdy floor mounting system with flanged steel feet for fixing hole. Two-handed safety cut control positioned ergonomically. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic controller. Maximum weight balancing system for durability. Shock-absorption system. Independent pneumatic adjustments for adaptation to various processing tasks. Durable and easily replaceable saw blade setting bar. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic top workpiece hold-down with electro-pneumatic control. Movement system utilizes innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must be equipped as standard with at least 1 meter long infeed and outfeed roller tables. Technical Data: ----- Max. crosscutting dimension: 220x125, 260x100, 285x80, 310x50 mm Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: Carbide (HM) Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Dust extraction port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V / 50 Hz, 3-phase Working table height: 900 mm +/- 20 mm Color finish: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right side of saw), non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, spacing 250 mm, width 320 mm. Area between rollers enclosed with painted steel. Includes lateral guide. 2 m roller conveyor (left side of saw), non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, spacing 250 mm, width 320 mm. Area between rollers enclosed with painted steel. Includes lateral guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm each ----- Total price ex works: on request! ----- Images and video not original, show identical model. Other options such as extended infeed/outfeed tables or stop systems available on request! (Technical data as per manufacturer, subject to change without notice!)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: Na voljo je tipska ploščica, 100,000-liter tank, used, double-walled, in good condition, immediately ready for use, cleaned – certificate from certified specialist company available. Length: 15.74 m Diameter: 2.90 m Height: 3.10 m (transport height) - Access ladder - Platform with guardrail - Welded saddle supports - Ventilation - Overfill prevention device Hfedpfx Abeuzvyuo Esd - Dipstick - Leak detector Loading and transport can be arranged. Only serious and legitimate inquiries will be answered. Please provide your name, email address, and phone number.