Weiler Lz 330 nakup rabljenega (180)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1974, Universal lead and feed screw lathe Make: WEILER Model: Commodor Year of manufacture: 1974 – overhauled Newly painted RAL 7035 light grey Machine No.: 0068 Centre height: 180 mm Hodpfomgaddox Abheh Distance between centres: 1000 mm Spindle bore: 56 mm With warranty Geometric acceptance with test protocol Accessories: - New FAGOR Innova 30i-T 3-axis digital readout - Chuck guard with electrical interlock - Quick-change tool post, size B - Simple bed stop - Coolant system - Operating manual - Used, as seen -

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Universal lead and feed screw lathe Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 1990 - overhauled Hedpfx Abshy Tdyehsh newly painted RAL 7035 light grey Machine no.: 90-160-2054 Centre height: 160 mm Centre distance: 650 mm Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant device - Electrically interlocked chuck guard - Quick-change tool post, size A - Simple bed stop - Chip guard rear panel - Operating manual With warranty Used, as seen The machine is technically compliant with the state of the art at the time of manufacture.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Universal lead and feed screw lathe Manufacturer: WEILER Model: Condor B Hedeg R S Rcjpfx Abhoh Year of manufacture: 1989 - overhauled newly painted, RAL 7035 light grey Machine no.: 1401 with warranty Includes: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new - Quick-change tool post base unit, size B - Bed stop - Coolant system - Chip backsplash - Operating manual -Used, as seen-

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Višina konic: 160 mm Razdalja med konicama: 650 mm Hedpfx Ajw Sn Irsbheh Hitrost vretena: 2.500 min-1 Multifix Konjiček Dodatki

Leto izdelave: 2009, obratovalne ure: 9 h, Stanje: pripravljen za uporabo (rabljen), Dodatečna oprema Premer konice konjička: 100 mm / Hod konice konjička: 200 mm / Notranji stožec konice konjička: Mk.5 Ta horizontalni stružni stroj je bil proizveden leta 2009. Gre za model Weiler E 60x1000, ki ima premer izvrtine vretena 83 mm in največji premer obdelovanca nad posteljo 640 mm. Z največjim navorom 1400 Nm in razponom vrtljajev do 2500 vrt/min je idealen za zahtevna struženja. Stroj je bil nedavno generalno obnovljen – zamenjani so bili ležaji in vodila – kar zagotavlja visoko natančnost. Izkoristite priložnost za nakup tega horizontalnega stružnega stroja Weiler E 60x1000. Za več informacij o stroju nas kontaktirajte. Hedpfx Abex D Ry Hjhoh Vrsta uporabe Struženje

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Hjdex D Hz Tjpfx Abhjh Teža stroja: 11.500 kg Višina stroja: 2.120 mm Krmilna enota Znamka: SIEMENS Model: 810 D Dimenzije Dolžina stroja: 5.400 mm Glavni pogon Število osi: 2 Moč glavnega vretena: 45 kW Stružnica Weiler E120x3000 je bila izdelana leta 2001. Ima razdaljo med konicama 3.000 mm, višino konice 600 mm in premer vrtenja nad posteljo 1.200 mm. Premer vretena je 165 mm, glavni pogon pa nudi moč 45/37 kW. Stroj je primeren za zahtevna struženja in vključuje dodatno opremo, kot so stružna glava, čelna plošča in podpora. Za dodatne informacije o stroju nas kontaktirajte. Uporaba Struženje

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1977, Strojniška stružnica Znamka: WEILER Model: MDU 260 Leto izdelave: 1977 – delavniško testirana Št. stroja: 14942 Višina konic: 125 mm Premer vretena: 28 mm Oprema: - Električni pokrov vpenjala - 3-čeljustno vpenjalo Ø 140 mm vključno s kompletom stružnih čeljusti vključno s kompletom svedrskih čeljusti - 4-čeljustno vpenjalo Ø 140 mm vključno s kompletom stružnih čeljusti vključno s kompletom svedrskih čeljusti Hjdpfxjxv A I To Abhsh - Varnostni ključ za vpenjalo - Ročni vpenjalni sistem - Set vpenjalnih tulec W28 (366E) - Set (=25 kosov) napenjalnih tulec W28 (366E), od 1,0 do 25,0 mm v korakih po 1,0 mm - Trdna konica za glavni vretenik W28 (366E) - Hitromenjalni nosilec orodja osnovno telo velika A - Navodila za uporabo Rabljeno kot je vidno, prodano brez garancije Stroj tehnično ustreza standardu iz leta izdelave.

Stanje: zelo dobro (rabljeno), Weiler Ergodor Lathe Max. turning diameter over bed: approx. 320 mm Max. turning diameter over cross slide: approx. 160 mm Max. turning length: approx. 470 mm Bar capacity: approx. 36 mm Spindle: Speed range: approx. 30 - 3,550 rpm Hodpfjq Ixxysx Abheh Spindle nose: A 2-5 Drive power: approx. 3.0 kW Automatic longitudinal and face feeds: Feed range: approx. 0.020 - 2.0 mm/rev Suitable for threading: - Metric thread: 0.20 - 12 mm - Inch thread: 80 - 2 TPI - Diametral pitch thread: 160 - 5.5 DP - Module: 0.1 - 4

Leto izdelave: 2010, Stanje: skoraj kot novo (rabljeno), We offer the following accessories for the Weiler E30 lathe: 1x Faceplate Schunk 250mm, Price: €600 Spindle nose DIN 55027 size 5 2x Faceplate Röhm 260mm, Price per piece: €650 Spindle nose DIN 55027 size 5 1x Travelling steady, Price: €450 2x Driving flanges, Price per piece: €210 Hsdpogabvnjfx Abheh Spindle nose DIN 55027 size 5 All parts are in very good condition.

Stanje: pripravljen za uporabo (rabljen), Medvratna razdalja: 500 mm, višina konice: 140 mm, premer struženja nad posteljo/prečnim sani: 295 mm/155 mm, vretenasta odprtina: 36 mm, hitrost vretena: 3550 obr/min, konus konjička: MK3. Dimenzije stroja X/Y/Z: pribl. 1500 mm/800 mm/1250 mm, teža: pribl. 700 kg. Ogled na lokaciji je možen. Hsdpjx Hz Rqefx Abheh

Stanje: pripravljen za uporabo (rabljen), Na voljo je konvencionalni precizni stružni stroj Weiler. Razdalja med konicama: 650 mm, višina konice: 160 mm, premer vrtenja nad posteljo/prizma: 320 mm/190 mm, premer vretena: 43 mm, hitrost vrtenja: 2500 obr/min, premer konice pinole: 40 mm, hod pinole: 85 mm. Dimenzije stroja X/Y/Z: pribl. 1800 mm/900 mm/1600 mm, teža: pribl. 1050 kg. Ogled na lokaciji je možen. Hedjx Hz N Hspfx Abheh

Leto izdelave: 1986, Stanje: rabljeno, Weiler Primus lathe, year of manufacture approx. 1986, three-jaw chuck, Multifix toolpost. The machine is in good condition and can be demonstrated under power by prior arrangement. Hsdpfx Aon Ard Dsbhjh

Stanje: zelo dobro (rabljeno), Swing diameter over bed 330 mm Centre distance 750 mm Spindle speeds 1–4,500 rpm Control: WEILER C3 Various accessories MARCELS MASCHINEN CH Hjdpfxjud Naqo Abhsh

Stanje: rabljeno, skupna dolžina: 1.500 mm, skupna širina: 750 mm, skupna višina: 1.350 mm, Lastna teža: 700 kg - Dokumentacija na voljo: Da - CE certifikat na voljo: Ne - Upravljanje: Konvencionalno - Višina konice [mm]: 150 - Premer struženja nad posteljo [mm]: 300 Hjdpfox D Tlrex Abhjh - Premer struženja nad saneh [mm]: 160 - Razdalja med konicama [mm]: 500 - Širina postelje [mm]: 210 - Premer izvrtine vretena [mm]: 36 - Najmanjše število vrtljajev vretena [rpm]: 15 - Največje število vrtljajev vretena [rpm]: 3550 - Transportne mere: 1500mm x 750mm x 1350mm (d x š x v) - Transportna teža [kg]: 700kg - Transportni paketi [kos]: 1 Finančne informacije DDV: Navedená cena ne vključuje DDV DDV/obračun razlike v ceni: DDV je odbiten za podjetja Dostava in možnost odkupa možna kadarkoli za vse iz industrijskega področja Lukas van Rossum

Stanje: dober (rabljeno), Vlečni & navojni stružnica WEILER PRAKTIKANT 800 R - Premer struženja nad posteljo: 300 mm - Premer struženja nad suportom: 150 mm - Dolžina struženja: 800 mm - Vrtina vretena: 42 mm - Hitrostni razpon vretena: 40 - 2000 min⁻¹ - Avtomatski vzdolžni / prečni pomiki - Navojni program: metrično/palčno itd. - Hrbtna konica: MK 3 - Trivelična glava - Zadnja zaščitna stena za ostružke + delovna svetilka - Posoda za ostružke - Izmenjalna kolesa - Omara za orodje - Dokumentacija Mere: DxŠxV: 1,8 x 0,8 x 1,6 m / Teža: 750 kg Napake in pomote pridržane. Hjdpfx Abox A Uktohoh

Stanje: dober (rabljeno), Stružnica Leit & Zugspindel WEILER CONDOR - Originalni premaz - Višina konic 165 mm - Premer struženja nad posteljo 330 mm - Premer struženja nad suportom 170 mm - Razdalja med konicama 800 mm - Vrtljaji vretena 24 - 2800 obr/min - Avtomatski vzdolžni / prečni pomiki - Premer izvrtine vretena 38 mm - Konjiček MK 3 - Naprava za vpenjalne tule + 17x vpenjalnih tulcev - Trio-čeljustna glava Hsdpfox A D Ubox Abhsh - Multifix z vložki - Električna zaščita glave - Zadnja zaščita pred ostružki - Delovna svetilka - Razna dodatna oprema - Dokumentacija Mere: D x Š x V 1,8 x 0,9 x 1,6 metra / Teža 800 kg Pridržujemo si pravico do napak ali pomot

Stanje: zelo dobro (rabljeno), Odlično stanje, redno vzdrževano (računi na voljo), veliko dodatne opreme! Hodpfx Abjxw D S Aohsh

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds: 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg Hjdpfsu Aftgox Abheh >> Dimensions: length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 pcs. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pcs. new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This new generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps Hsdpfevtp Edsx Abheh - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders - Stop - Electronic spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson ES8 From training workshop – In excellent condition! Technical Data: • Year of manufacture: approx. 1990, machine no. 3768 • Centre height: 120 mm • Centre distance: 430 mm • Spindle speed: 60 – 3000 rpm in 18 gear steps • Spindle bore: 23 mm • Camlock spindle nose, DIN 4 • Tailstock: Morse taper 2 • Feeds: 0.03 to 0.15 mm/rev • Thread cutting: Metric, Inch, Module, and Diametral Pitch • Metric thread pitches: 0.25 to 2.5 mm • Weight: approx. 360 kg • Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: • 3-axis digital readout by Easson ES8 • Collet chuck system from 1 to 20 mm, collets in 1 mm increments with chuck and draw tube • 1 three-jaw chuck with 2 sets of jaws • 1 four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Facing attachment Hodjvkfhpepfx Abhjh About the machine: Offered is a Weiler Primus lead and feed screw lathe, year approx. 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed ways are in excellent condition. Even at high spindle speeds, the Weiler runs quietly. The machine comes from a large company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new About the Machine: Hedpfx Aovivmyobhjh For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B with Lead and Feed Screw, 3-Axis Digital Readout by K&C, NEW, CE Compliant! Technical Specifications: >> Machine No.: 2442, Year of manufacture: 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm Hjdpfx Abexcuazohjh >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 (MT 3) >> Feeds from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and Features: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, coordinate choice ABS/INC, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 1 piece new 3-jaw chuck 160 mm, 2 sets of jaws >> 1 piece 4-jaw chuck 200 mm, 1 set of jaws >> New collet chuck and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B quick-change tool post with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear cover >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, change gear box with limit switch, spindle brake About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Weiler Primus VC Precision Centre Lathe 3-Axis Digital Readout K&C NEW with VC Drive, Infinitely Variable Speed and CE. Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT3 >> Feeds from 0.02 to 0.63 mm/rev >> Available threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be engaged >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Equipment and Accessories: >> 3-axis digital readout K&C NEW >> Collet device with collets 3 to 26 mm, new, incremented by 1 mm, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electronic chip guard >> Machine feet >> Splash guard About the Machine: Hjdsw Idllspfx Abhsh For sale is a Weiler Primus VC lead and feed screw lathe, year 2003, in very good original condition. An excellent lathe with VC drive and infinitely variable speed control of the main spindle. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is user-friendly and allows for producing surface finishes comparable to grinding. The K&C digital readout further simplifies and improves accuracy of operation. You are welcome to inspect the machine powered up at our premises and convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 – Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1987, Machine No. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threads: Metric, Imperial, Module, and Diametral-Pitch possible >> Metric thread pitches: 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Features: Hedpfxjwrmuxe Abhsh >> NEW 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Features: Switching between mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter function, quick zeroing, counting direction reversal >> 1 x 160 mm 3-jaw chuck NEW, 2 sets of jaws >> 1 x 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Machine feet About the machine: Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely dismantled and newly repainted. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more accurate. The machine has been electrically and mechanically tested in our facility. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout from K&C – FROM TRAINING WORKSHOP! Technical Data: Hedpfxjw Nw Dqs Abhjh >> Machine No. 91-1814, Year 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Equipment and Features: >> New 3-axis digital readout by K&C with 12-month manufacturer's warranty and manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter conversion, quick zeroing, counting direction switch, >> 1 pc. NEW 3-jaw chuck 160 mm, 2 sets of jaws >> 1 pc. 4-jaw chuck 160 mm, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady rest >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear housing with limit switch, spindle brake About this Machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout by K&C makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our facility.