Weiler Commodor 230 nakup rabljenega (203)

Leto izdelave: 1977, Stanje: rabljeno, Weiler Matador lathe, year of manufacture approx. 1977, three-jaw chuck, Multifix quick-change toolpost. The machine is in operational condition and can be demonstrated under power by prior arrangement. Ibjdpfx Ahsnkad Ss Dec

Stanje: rabljeno, številka stroja/vozila: 1717, used lead and feed screw lathe WEILER PRAKTIKANT Iodsuqb Emepfx Ah Debc Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 piece 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 holders Lever-operated collet chuck system with 15 collets. The machine is located at our site in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 165 mm, širina na sredini: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model stands out for its exceptionally user-friendly operation and an excellent ratio of footprint to center height and center distance. The Condor B is positioned between the Weiler Praktikant and Weiler Commodor models, making it a true all-rounder for any workshop. The machine has been partially overhauled in our workshop, ensuring that it is in excellent technical and optical condition. All guides are in good order, the gearboxes run smoothly and quietly, and the levers can be shifted with ease. You are welcome to inspect the machine on-site to verify its condition. Isdpfx Aow N Np Soh Debc Availability: upon request Centre Height: 165mm Centre Distance: 750mm Spindle Bore: Ø 40mm Tailstock Taper: MT3 Chuck Mount: Short Taper DIN55027 Size 5 with bayonet lock Quill Travel: 85mm Speeds: 22–2800 rpm Thread Types: Metric, Imperial, Module, Diametral Pitch Metric Thread Pitches: 0.18–28mm Spindle Brake: Switchable Voltage: 400V Dimensions: approx. 1.80 x 1.30 x 0.9 m (L x H x W) Weight: approx. 1100 kg Additional features and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stops, lead- and feed screw covers (optional), operating manual, and much more on request. Our service promise to you: - We are a certified master craftsman company specializing in mechanical engineering. - All machines are at least workshop tested. - All lubricants and, if necessary, worn components are replaced prior to sale. - On request, we can provide a partial or complete overhaul of the selected machine. - On request, we can repaint the selected machine in your desired color. - On request, you can order additional accessories such as tools directly from us. - On request, we can also install further accessories such as safety equipment. - We are happy to organize shipping and/or installation for you.

Stanje: rabljeno, Leto izdelave: 1982, Swing diameter over bed: 297 mm Swing diameter over cross slide: 160 mm Turning length: 500 mm Isdsvxwlpopfx Ah Djbc Distance between centers: 500 mm Spindle speed: 15 – 3550 rpm Spindle nose size: 5 (DIN 55022) Spindle bore: 36 mm Tailstock quill taper: MT 3 Tailstock quill travel: 90 mm Tailstock offset: 500 mm Motor speed: 1440 / 2830 rpm Motor power: 3 / 2.2 kW Weight: 0.8 t Space requirements (approx.): 1.40 x 0.70 x 1.20 m Chuck guard with electrical interlock Tool cabinet with various contents

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), Various metalworking machines are available: Ibsdpfewpkzqox Ah Dec 1) Larger guillotine shear BBM, year of manufacture: 1995. 2) Spot welding machine Nimak, year of manufacture: 1990s. 3) Circle cutting machine Schwartmanns, year of manufacture: 1987. 4) Smaller lathe Weiler, year of manufacture: 1966. 5) Table stud welding unit Soyer, year of manufacture: 2000s. 6) Free-standing bench grinder. 7) Deburring machine KSM, year of manufacture: 1980s. 8) Larger hydraulic press TOX, year of manufacture: 1990. 9) Hydraulic press TES 15, year of manufacture: 1972. 10) Single-column bench press, year of manufacture: 1955. 11) Pull-off machine Landert. An on-site inspection is possible.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ta stružnica Weiler Commodor prihaja iz tehnične šole, zato ima malo delovnih ur. Lahko uporabljena in ni bila močno obremenjena – čista, zanesljiva naprava z dolgo življenjsko dobo. Dolžina struženja: 1.000 mm. Premer struženja nad ležiščem: 380 mm. Premer struženja nad prečnim suportom: 190 mm. Število vrtljajev vretena: 25 – 2.000 min⁻¹. Število stopenj hitrosti: 18. Premer vretenaste luknje: Ø 56,0 mm. Vretenov konus: MK DIN 228 / MK 4. Vretenova prirobnica: DIN 55027 / velikost 6. Pomik rezkalne glave: 150 mm. Širina ležišča: 310 mm. Podaljšano podajanje – vzdolžno: 0,022 – 0,8 mm/obrat. Podaljšano podajanje – prečno: 0,011 – 0,4 mm/obrat. Napetost: 380 V. Iedpfx Ahew U Sx Hs Dsbc Skupna potrebna moč: 7,5 kW.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Used L+Z Lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Year of manufacture: approx. 1987 Centre distance: 750 mm Swing over bed: Ø 330 mm Centre height over bed: 165 mm Swing over cross slide: Ø 180 mm Centre height over cross slide: 90 mm Spindle bore: Ø 40 mm Tailstock taper: MK 3 Quill travel: 110 mm Spindle speed: 45 - 2800 rpm (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (main motor speed 1+2) Power supply: 400 Volt, 50 Hz Connected load: 32 kW Ijdpfxevadqzo Ah Dsbc Control voltage: 42 Volt Equipment & Accessories: - 3-axis digital readout (Heidenhain VRZ 750) - Quick-change collet system and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change tool post, size B - LED work light - Bed stop - Automatic longitudinal and face feeds - Electromechanical spindle brake (switchable) - 2 x emergency stop - Electric chuck key interlock (via sleeve with push-button) - Coolant tank with pump integrated in machine base - Foldable chuck guard - Splash guard wall - Circuit diagram - Adjustable machine feet Required space: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This newer generation of Weiler lathes is extremely user-friendly and robust. The machine can be demonstrated under power at the site. All information without guarantee. Subject to prior sale.

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Na prodaj je robusten in natančen cikelni stružnica WEILER E90 x 4500, letnik 1999, z velikim premerom vrtenja in cikličnim krmiljenjem – idealna za težke obdelovance do 6000 kg. Ijdpfx Ahjw Idx Ss Djbc Stroj je tehnično v dobrem stanju in je bil nazadnje v industrijski uporabi. Odličen je za posamično in maloserijsko proizvodnjo velikih komponent. Stroj ima ciklično krmiljenje, stabilno luneto in konjiček z velikim hodom pinole.

Stanje: rabljeno, Leto izdelave: 1997, - 4-jaw face plate Ø 550 mm - 3-jaw chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 8 sets of soft top jaws - fixed steady rest - live centre MK5 - Multifix B quick-change tool post incl. 10 tool holders - Operating hours: 32,582 h - Year of manufacture: 1997 - incl. operating manual and technical documentation Technical specifications: Working area: - Distance between centres: 1000 mm - Centre height: 280 mm - Swing diameter over bed: 570 mm - Swing diameter over cross slide: 340 mm - Bed width: 350 mm - Cross slide travel: 340 mm - Top slide travel: 140 mm - Cross slide length: 700 mm - Cross slide width: 220 mm - Bed guideway length: 560 mm - Turning tool cross-section (H x W): 32 x 25 mm Spindle: - Spindle nose as per DIN 55027: Size 8 - Spindle diameter in front bearing: 100 mm - Spindle bore: 66 mm - Main spindle internal taper: metric 70 Main drive: - Drive power 60% / 100% duty cycle: 15 / 11 kW - Max. torque at spindle: 1600 Nm - Overall speed range: 1 – 2500 rpm - Gear range I: 1 – 625 rpm - Gear range II: 4 – 2500 rpm Feed drive: - Type: three-phase servo drives - Feed range longitudinal and cross: 0 – 10 mm/rev - Longitudinal feed force: 9000 N - Cross feed force: 7000 N - Rapid traverse speed longitudinal/cross: 7 / 3.5 m/min Tailstock: - Quill diameter: 70 mm - Quill stroke: 160 mm Ibsdpfx Aher Hrq Do Djc - Quill internal taper: MK5 Thread cutting range: - Metric threads: 0.1 – 250 mm - Inch threads: 1/4 – 56 TPI (G/1") - Module threads: 0.125 – 28 - DP threads: 1 – 224 Machine dimensions: - Dimensions (W x H x D): 2850 x 1750 x 1815 mm - Machine weight: 2950 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Weiler Center Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Specifications: >> Year of manufacture: 1988, Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm Isdpfotlu Scex Ah Debc >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.015 to 0.46 mm/rev >> Threads possible: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 3 to 30 mm, 40 collets, some duplicates >> Multifix toolpost, size B, with 3 holders >> Bed stop >> Machine feet >> Drill chuck >> Live center Safety Features: >> Lead and feed screw guard >> 2 emergency stop buttons >> Spindle brake About the Machine: For sale is a used Weiler Condor 81 lathe from 1988 in very good condition. Naturally, the machine is fully functional. Both the lead and feed screws are fitted with protective covers for safety. This is a very robust and powerful machine. The 3-axis digital readout from Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has also been carried out. This newer generation of Weiler lathe is very user-friendly. Take the opportunity to view and test the machine under power at our facility.

Stanje: pripravljen za uporabo (rabljen), Centre height: 165 mm, centre distance: 800 mm, turning diameter over bed/cross slide: 330 mm/185 mm, spindle bore: 40 mm, spindle speed: 2800 rpm, machine dimensions X/Y/Z: approx. 2000 mm/1000 mm/1700 mm, weight: approx. 900 kg. An on-site inspection is possible. Iedpfxewq R N Dj Ah Dobc

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1983, Machine No. 83-067 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, selectable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Scope of Delivery and Accessories: >> NEW 3-axis digital readout by K&C, 12-month manufacturer’s warranty, complete with manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference marker, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> 1 pcs 3-jaw chuck NEW 160 mm, 2 sets of jaws >> NEW collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 3 holders >> Electronic spindle protection >> Rear guard >> Coolant system >> Machine feet About the Machine: Ibodpfxjwb Supj Ah Dec For sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been both electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test the machine under power at our site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: Isdpovivmyjfx Ah Debc >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe in Very Good Original Condition!!! Technical Specifications: >> Year of manufacture: approx. 1992, Machine No. 4549 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock taper: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Capable of cutting metric, inch, module, and diametral pitch threads >> Metric thread pitch from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Features: >> New collet chuck system, new collets from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders Isdpfx Ajwkh Aboh Debc About the Machine: For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The bed ways are in excellent condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and enables ground-finish surfaces to be produced. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 – Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: Ibsdjwrmuxjpfx Ah Dec >> Year of manufacture: 1987, Machine No. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threads: Metric, Imperial, Module, and Diametral-Pitch possible >> Metric thread pitches: 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Features: >> NEW 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Features: Switching between mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter function, quick zeroing, counting direction reversal >> 1 x 160 mm 3-jaw chuck NEW, 2 sets of jaws >> 1 x 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Machine feet About the machine: Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely dismantled and newly repainted. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more accurate. The machine has been electrically and mechanically tested in our facility. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus GS Lead and Feed Screw Lathe with 3-Axis Digital Readout Easson ES8 From training workshop – In excellent condition! Technical Data: • Year of manufacture: approx. 1990, machine no. 3768 • Centre height: 120 mm • Centre distance: 430 mm • Spindle speed: 60 – 3000 rpm in 18 gear steps • Spindle bore: 23 mm • Camlock spindle nose, DIN 4 • Tailstock: Morse taper 2 • Feeds: 0.03 to 0.15 mm/rev Isdsvkfhpepfx Ah Debc • Thread cutting: Metric, Inch, Module, and Diametral Pitch • Metric thread pitches: 0.25 to 2.5 mm • Weight: approx. 360 kg • Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: • 3-axis digital readout by Easson ES8 • Collet chuck system from 1 to 20 mm, collets in 1 mm increments with chuck and draw tube • 1 three-jaw chuck with 2 sets of jaws • 1 four-jaw chuck with 2 sets of jaws • Multifix size A with 3 tool holders • Bed stop • Facing attachment About the machine: Offered is a Weiler Primus lead and feed screw lathe, year approx. 1990, in outstanding condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed ways are in excellent condition. Even at high spindle speeds, the Weiler runs quietly. The machine comes from a large company’s training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surface finishes comparable to grinding. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout K&C Excellent Condition!! Technical Specifications: >> Year of manufacture: 1991, Machine No. 91-160-2804 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 - 0.63 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: 0.25 - 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories and Features: >> NEW K&C 3-axis digital readout, 12 months manufacturer's warranty, user manual included Ibjdpfx Aowv S Ufsh Doc Functions: mm/inch switchable, coordinate selection ABS/INC, display value halving, reference point, 200 tool memory, taper calculation, radius/diameter, quick zeroing, counting direction switch >> Quick-clamping device, collets from 1 to 29 mm in 1 mm increments >> NEW 160 mm 3-jaw chuck with jaws >> Multifix size A with 2 toolholders >> Electronic chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: Offered here is a Weiler Praktikant 160 B lead and feed screw lathe, with toolmaker accuracy, in very good condition. The machine is, of course, fully functional. The machine has been completely disassembled and repainted in light grey. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly, and allows you to produce ground-like surface finishes. Take advantage of the opportunity to inspect this machine under power on-site and see its condition for yourself.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe Iodsvv Etvjpfx Ah Debc Technical Data: >> Year of manufacture: approx. 1970, Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds from 0.010 to 1.184 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set is incomplete) and mount >> 1 three-jaw chuck including a set of jaws >> 1 four-jaw chuck including a set of jaws >> Multifix size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power on-site to verify its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition !!! Technical Data: >> Machine No. 2801 >> Center Height: 120 mm >> Distance Between Centers: 430 mm >> Spindle Speed: 60 - 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock Morse Taper: MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: Ibedpfsv Tyzcex Ah Dsc >> 1 pc Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet system with collets from 2 mm to 12 mm in 1 mm increments, including drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Clamping tools About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriages move very smoothly and evenly. The Weiler runs quietly, even at high spindle speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect the machine under power on site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to it.) Digital readout available at additional cost.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: >> Year of manufacture: approx. 1985 Ibodpfx Aeu Aftgjh Dsc >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds: 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 pcs. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pcs. new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This new generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160B Precision Centre Lathe – 3-Axis K&C Digital Readout System (NEW) Refurbished with acceptance protocol confirming new machine tolerance levels. Technical Data: >> Machine Number: 87 160 760 >> Centre Height: 160 mm >> Distance Between Centres: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feed Rates: 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake, switchable >> Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m Accessories & Equipment: >> 3-axis K&C digital readout system (new), including 12-month manufacturer's warranty and operating manual Functions: mm/inch switching, coordinate mode ABS/INC, value halving, reference mark, tool memory for up to 200 tools, taper calculation, radius/diameter display, instant zero reset, and count direction switching >> New collet system, collets NEW from 3 to 25 mm in 1 mm increments Iedpfx Aevrdlcjh Dobc >> Three-jaw chuck 160 mm, new, with 2 sets of jaws >> Multifix size A toolpost system with 3 tool holders >> Electronic spindle protection >> New LED machine lamp >> New machine mounts >> Splash guard >> Operating manual, spare parts list (PDF) About the Machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe meeting toolroom precision, in fully overhauled geometric condition. Refurbished, with acceptance protocol confirming new machine tolerance specification. For operator safety: electronic spindle protection, covered lead and feed screws, 2 emergency stops, and a braking motor. This newer generation of Weiler lathes is highly operator-friendly and can produce ground-quality surface finishes. You are welcome to inspect the machine under power onsite and verify its condition firsthand.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm Ibedpfx Ajvtp Edeh Dec - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders - Stop - Electronic spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of Manufacture: 1986 >> Machine No.: 86-160-348 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 8 steps, from 96 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027, Size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric Thread Pitches: from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake can be engaged >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Accessories and Equipment: >> 3-axis Digital Readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> Collet chuck system, collets as new, range 1–29 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix toolpost size A with 3 tool holders >> Electric chuck guard Ibsdpfx Ahswthbis Djc >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled, refurbished, and repainted in light grey. All carriages move very smoothly and evenly. The machine runs quiet even at high speeds. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see the condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: Iedpfjwrm Dtsx Ah Debc A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW Geometrically overhauled with inspection protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Features: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> Multifix quick-change toolpost, size A, with 2 tool holders, NEW >> Bed stop >> Electric chuck guard NEW >> LED machine lamp NEW >> Rear safety cover Ibjdpfxsvambco Ah Dec >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.