Vodoravno nakup rabljenega (180)

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw band length 3375 x 27 x 0.9 mm Band speed 18 – 100 m/min Table height 940 mm Total connected load 1.5 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy Iodpfx Adofgyiaskeap - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing turntable - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Iasdpfjfgyicox Adkop Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting range at 90°: round 680 mm Iedpfx Aofgyigodkoap Cutting range at 90°: square 640 mm Cutting range at 90°: rectangle 1250x600 mm Saw band length: 8140x54x1.6 mm Band speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight approx. 4.96 t Space requirement approx. 5.7 x 4.0 x 2.75 m 2-column bandsaw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (optional). Fast, smooth, and ergonomic cutting Specially designed for cutting profiles and beams as well as solid material. The material is clamped vertically on both the infeed and outfeed sides. Starting from model K-tech 800 H, the machine is equipped as standard with an additional horizontal vice. The interplay of hydraulic saw frame descent, material positioning, and the pusher system is CNC-controlled. The machines are equipped as standard with the environmentally friendly "B&S Clean Cut" cutting system with minimum quantity lubrication. This reduces cleaning requirements and conserves resources. CNC control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning unit, is equipped with 'double-sided opening clamping jaws' which are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate somewhat from the ideal shape. The pusher system is built separately and is guided via ball-bearing linear guides, precision-ground rack, and a frequency-driven, robust geared motor.

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off Ijdpefg E Hljfx Adkeap 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice Iedpjd Iipxefx Adkjap - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting range at 90 degrees: round 250 mm Cutting range at 90 degrees: square 210 mm Cutting range at 90 degrees: rectangle 290 x 210 mm Iaodpfx Adjd Iip Nskop Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 + 70 m/min Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! Double mitre metal bandsaw featuring: - Band speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for rapid mitre adjustment - Movable quick-action vice - Quick-release lever - Automatic coolant system

Stanje: novo, Cutting range at 90°: round 680 mm Cutting range at 90°: square 640 mm Cutting range at 90°: rectangle 820x610 mm Cutting range at 45°: round 550 mm Cutting range at 45°: square 550 mm Cutting range at 45°: flat 550x600 mm Cutting range at 60°: round 370 mm Cutting range at 60°: square 370 mm Cutting range at 60°: flat 370x600/450 mm Saw blade length: 7260 x 41 x 1.3 mm Band speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.8 t Space requirement: approx. 5.85 x 3.7 x 2.7 m 2-column double miter band saw for high-speed cutting with pusher system P15, option P30 Hydraulic saw frame lowering - NC controlled - Automatic angle positioning from +60° to -60° Iaedpfxofg E Hmj Adkop High-quality automatic miter adjustment Specially designed for cutting profiles and beams. The highest positioning accuracy is achieved with the new "B&S positioning system". An intelligent NC control ensures smooth coordination of linear encoder and self-braking positioning motor, in combination with a reliable hydraulic brake via large-radial center positioning. The work table is mounted via high-quality preloaded bearings, ensuring very smooth rotation. CNC control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities, and miters. Dual-side gripping positioning system The B&S pusher system, feed and positioning system, is equipped with 'dual-side opening grippers' which are hydraulically actuated. This guarantees secure gripping and conveying of materials and bundles that deviate from ideal form. The pusher system is constructed separately and is guided by ball-bearing linear guides, ground rack, and a frequency-driven, robust gear motor.

Stanje: novo, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Saw band length: 5450 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.2 t Dimensions L x W x H: 2,675 x 2.15 x 2.05 m SPECIAL PRICE!!!! 2-column high-performance bandsaw machines of the SBS series The SBS series impresses with advanced technology, high quality, durability, and a uniquely comprehensive standard equipment package. • Modern SNC 20 control for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vice (before and after the band) • Inch mode for positioning • Bundle clamping, prepared for electric and hydraulic operation Iajdpfefg E Hvjx Adkop • Chip conveyor The SNC 20 control allows convenient and simple input of up to 20 different cutting tasks (length and quantity). Upon entering the desired dimensions, the controller automatically calculates the trim cut and the number of feed strokes. In addition, the error code display system enables quick analysis for troubleshooting.

Stanje: novo, Cutting range at 90°: round 255 mm Cutting range at 90°: square 240 mm Cutting range at 90°: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 – 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirements approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 250 Super VA-I MPS - Mitre left 45° in automatic mode - Mitre left 60° in semi-automatic mode (cuts without programming) - Impact-resistant and ergonomic control panel with oil-resistant EPDM cover - Material height sensor (automatic cutting start detection) - One-piece cast frame and gearbox for extremely quiet and low-vibration operation Iodod Iip Aopfx Adksap - Removable chip tray (easy cleaning/disinfection) - Excellent accessibility to saw, material, and feed unit - Hinged safety cover - Fine adjustment for feed rate - Semi-automatic cutting! Automatic sawing with microprocessor control Selectable for 2 programmable levels Semi-automatic operation Fully automatic operation Start cycle after input of desired quantity and material length: material approach, cutting, and piece counting until program fulfillment - MPS control system for input of required number of feed cycles - All essential machine data displayed on the LED display during the cutting process (current draw, cutting time, piece count) - Entered data is retained in RAM memory - The self-diagnostic circuit automatically displays any irregularities as error messages and monitors the entire process - Floating feed unit - Length adjustment using handwheel and vernier scale with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm or, using the reversing automatic, 1–29 repetitions, remnant length 210 mm

Stanje: novo, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400x330 mm Saw band length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 - 100 m/min Iedpfxjfb Nbgj Adksap Total power requirement: 3.7 kW Machine weight approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-column high-performance automatic band saws of the SBS series The SBS series impresses with advanced engineering, high quality, durability, and an unrivaled comprehensive standard equipment package. - Modern SNC 20 controller for CNC models - Frequency-controlled saw drive - Control buttons with pictograms - Work light - Powered chip brush - Hydraulic blade tensioning - Clamping pressure regulation - Double vice (in front of and behind the band) - Inch mode for positioning - Bundle clamping, pre-configured electrically and hydraulically - Chip conveyor The SNC 20 controller enables user-friendly and straightforward input of up to 20 different sawing tasks (length and quantity). When entering the desired measurement, the controller automatically calculates the saw cut allowance and the number of feed strokes. Additionally, the error code display system provides rapid fault analysis for troubleshooting.

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw Hydraulic semi-automatic with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Cutting pressure and feed rate regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy miter adjustment Iaedpfx Adefgyh Sekep - Movable quick-release vice - Quick-release lever - Automatic cooling system

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. Iedpfx Aefg E Hpsdksap - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw blade length: 5980 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight approx. 3.8 t Dimensions L x W x H: 3.0 x 2.15 x 2.2 m SPECIAL PRICE!!!! 2-column high-performance band saw machines of the SBS series The SBS series stands out thanks to advanced technology, high quality, durability, and an unrivalled, extensively equipped standard specification. - Modern SNC 20 control system for CNC models - Frequency-controlled saw drive - Operation buttons with pictograms - Work light - Driven chip brush - Hydraulic blade tensioning - Clamping pressure regulation Iajdpfx Adjfg E Hwokep - Double vice (in front of and behind the blade) - Creep mode for positioning - Bundle clamping prepared for electric and hydraulic operation - Chip conveyor The SNC 20 control enables convenient and simple programming of up to 20 different sawing tasks (length and quantity). When entering the nominal dimension, the control system automatically calculates the cutting waste and number of feed strokes. Additionally, the error code display system allows for rapid troubleshooting and diagnostics.

Stanje: novo, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangle 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirement: approx. 1.5 x 1.78 x 1.3 m SPECIAL OFFER PRICE!!! Double miter bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Miter cut left 60° / right 45° • Heavy-duty industrial hydraulics, 18 bar • Optimal access to the workpiece • Ammeter for monitoring: - Cutting force optimization - Blade life - Cut accuracy • Hydraulic vice: automatic clamping and release • Swarf removal brush • Material turntable with ball bearings • Quick-release vice, movable • Height sensor for material (automatic cut start detection) Semi-automatic operation: Iaodpfx Aod Iiptjdkjp 1. Clamp material 2. Start saw 3. Fast lowering to material, or for serial cuts, start cutting immediately 4. Saw blade stops 5. Raise saw frame slightly above material 6. Release vice

Stanje: novo, Cutting diameter round: 355 mm Iasdjfm T Hbjpfx Adkep Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to max. 350 x 350 mm. Standard equipment includes: • Powered chip conveyor, mountable to the right or left side of the machine • Clamping pressure regulation for the vices • Material feeder with vertical rollers for lateral material support • Sensors for material start detection • Clamping pressure adjustment • Storage for up to 300 programs • The machine is available with either 34 mm or 41 mm blade at no extra charge Price on request.

Stanje: novo, Cutting range at 90 degrees: round 510 mm Cutting range at 90 degrees: square 480 mm Cutting range at 90 degrees: rectangular 610 x 450 mm Saw band length 5320 x 34 x 1.1 mm Band speed 15 - 100 m/min Table height 820 mm Total power requirement 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic mode Material height sensor (automatic cut start recognition) Automatic feed unit with ball screw incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Iasdpfxofu Nbbj Adkop Hydraulic unit with automatic pressure shut-off in idle mode Mechanical swarf removal brush Feed vice opens on both sides Minimum rest piece length 100 mm Modern, freely programmable CNC control for multiple sawing jobs with various cutting lengths and quantities Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm Fully hydraulic control of saw frame and clamping devices Pre-selection of 3 different material feed rates Visualization of the entire work process with simple data entry

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Iaedpfxjd Iip Rj Adksp Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Shipping cost share: 120 EUR

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 – 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Required space: approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed: 25 – 90 m/min Isdpfxsfgyh Rs Adksap - Miter cuts up to 60° left and 45° right - Ball-bearing turntable for quick miter adjustment - Sliding quick-release vise - Quick-clamping lever - Automatic coolant system

Stanje: novo, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Iodpfxsfgyifo Adkjap Cutting capacity at 90 degrees: rectangle 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15, P 30 (optional), Fast, smooth, and ergonomic cutting Specially developed for cutting profiles, beams, and solid materials. Material is clamped vertically on both the infeed and outfeed sides. From K-tech 800 H onwards, the machine comes standard with an additional horizontal clamping vise. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC controlled. The machines come standard with the environmentally friendly B&S Clean Cut cutting system featuring minimal quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. The B&S pusher system—an infeed and positioning system—is equipped with 'double-sided opening grippers' that are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is mounted separately and guided by ball-bearing linear guides, a ground rack, and a robust, frequency-controlled geared motor.

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Iodpfxjfd Abao Adksap Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90 degrees (flat): 510 x 320 mm Cutting capacity at 90 degrees (square): 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Iaodpfx Adofg E Ibekep Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm for cutting pipes, profiles, and beams up to a maximum cutting area of 510 x 320 mm at 0°. The control console on a swiveling arm allows for convenient and safe operation from any position. Electronic inverter for stepless regulation of blade speed from 15 to 100 m/min. Large rotary table with a diameter of 280 mm, featuring engraved precise fine scaling, easily adjustable and supported.

Stanje: novo, Cutting diameter: 170 mm Saw band dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Cutting speed: 40 + 80 m/min Cutting capacity at 90° (round): 170 mm Cutting capacity at 45° (round): 125 mm Cutting range at 90° (rectangular): 150 x 190 mm Cutting range at 45° (rectangular): 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (LxWxH): 870 x 1,550 x 1,740 mm This metal bandsaw is supplied with an enclosed worm gear. It is also equipped with a hydraulic pressure regulator and a base frame that can be swiveled by 45 degrees. Additional features include an emergency stop, a complete cooling system, the factory base frame, automatic shut-off, and a quick-release vice. Iedpfog Trvrsx Adkoap

Stanje: novo, Cutting diameter: 225 mm Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Table height: 935 mm Cutting speed: 45 + 90 m/min Cutting capacity at 90° round: 225 mm Iasdpfx Asfb Nbdsdksp Cutting capacity at 45° round: 145 mm Cutting capacity at 60° round: 90 mm Cutting area at 90° (rectangular): 150 x 245 mm Cutting area at 45° (rectangular): 190 x 150 mm Cutting area at 60° (flat): 120 x 90 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (LxWxH): 1380 x 580 x 930 mm - With a power rating of 1,100 watts, the unit is ideal for processing hard metals. - Enhanced safety thanks to emergency stop and automatic shut-off. - The low-noise electric motor ensures a quiet working environment. - Ergonomically designed buttons provide convenient operation of the machine.

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 25 - 80 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Isdpfsd Iip Tex Adkeap Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 0.24 t Space requirement: approx. 1.2 x 0.6 x 1.7 m SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° to the left -Cutting speed 25 - 80 m/min -Vice with quick-release mechanism -Carbide saw band guide -Band tension control -Electric coolant system Auto-Cut System = 3-stage system: -Automatic saw frame descent via hydraulic cylinder -Infinitely variable feed rate -With limit switch -Rapid descent of the saw frame from home position to workpiece, then switches to normal feed rate -Manual operation

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 35 + 70 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight approx. 0.24 t Space requirement approx. 1.2 x 0.6 x 1.7 m SPECIAL PRICE!!! -Mitre cuts up to 60° left -Cutting speed 35 / 70 m / min -Vice with quick-release device -Carbide saw band guides Iajdpfxjd Iip Us Adkop -Band tension control -Electric cooling system Auto-Cut System = 3-stage system -Automatic saw frame lowering via hydraulic cylinder -Infinitely variable feed adjustment -With limit switch -Rapid lowering of the saw frame from resting position to the workpiece, then switch to normal feed rate -Manual operation Freight charge: EUR 85,-