Vodoravno nakup rabljenega (174)

Stanje: rabljeno, Leto izdelave: 1982, Grinding length: 500 mm Grinding width: 225 mm Workpiece height: 400 mm Total power requirement: 5.5 kW Kedpfx Afjcxxtms Noll Machine weight approx.: 3.4 t with NC control NC81, table toothed belt drive 100-25000 mm/min, automatic infeed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety device

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, obratovalne ure: 44.590 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 2.000 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, kapaciteta rezervoarja za olje: 3.100 l, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2025, Technical Data of the Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours (as of December 2025) Main press force: 200 t Specific press force: 16.5 kg/cm² Feed hopper dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput (MSW): approx. 48 to 54 t/hour, depending on material Hydraulic oil tank volume: 3,100 L Machine weight (press): approx. 50.8 t Scope of delivery: • 1 MACPRESSE baler, model 111A • 1 operating manual with CE declaration, electrical and hydraulic schematic diagrams Notes: The machine has been serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank fully drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantling of the press ram, disassembly into individual parts, overhauling the mechanism Kodpfx Aox Dnb Uof Njll • Replacement of the front two main running rollers • Replacement of the knives on the press ram • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal kit replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame (left and right) replaced • Removal of worn press floor, replacement with wear-resistant HARDOX steel floor plate • Dismantling of the binding and twisting unit, disassembly into individual parts, overhauling the mechanism, replacement of all twisting shafts and ball bearings • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains lubricated and tensioned • All wire deflection rollers overhauled • All door contact switches replaced • Wirbulator dismantled, disassembled, and overhauled • General maintenance work performed Finally, the baler was subjected to a machine test in manual and automatic mode; see our video for the function test of the machine. Complete documentation (operating manual, CE declaration, electrical/hydraulic schematic diagrams) is available. An inspection is possible by appointment. No liability is assumed for technical specifications or possible errors.

Stanje: rabljeno, Pressing force 32 t Klodpfogvkigsx Af Nel Stroke 250 mm Table size 500 x 760 mm Working height 925 mm Bending speed max. 25 mm/sec Tank capacity 80 l Pressure capacity 320 bar Total connected load 5.5 kW Machine weight approx. 0.8 t Space requirement approx. 1.3 x 0.5 x 1.3 m Max. bending height: 200 mm Max. cutting capacity (steel): 150 x 14 Max. punching capacity (steel) Ø 35 Straightening height: 200 mm

Stanje: rabljeno, Horizontal Nienkemper BS0 Band Resaw Wheel diameter: 1100 mm Kljdpfx Afsci Df As Njl with mechanical hand clamping carriage

Stanje: rabljeno, Horizontal conveyor belt, 13,500 x 800 mm wide, 13.5 m long, price: €4,900, contact person: Mr. Rainer Eckerle. Klsdpe R U U Ajfx Af Njl

Stanje: novo,

Stanje: rabljeno, Bündelpresse / Bunch Press - Horizontal La Fornigrafica BP Hydraulische horizontale Bündelpresse / Hydraulic horizontal bunch press Pressdruck stufenlos einstellbar / Infinitely adjustable pressing pressure: 0 – 2,500 kg Kodpfjh R Udwsx Af Nell Einsatzlänge / Infeed length: max. 820 mm Pressplattengröße / Press plate size: 340 x 260 mm Online-Video-Inspektion per Skype-Video möglich Wir freuen uns auf Ihren Besuch – Weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Lagerort: Emskirchen bei Nürnberg – Probelauf möglich

Stanje: rabljeno, Bündelpresse / Bunch Press – horizontal Tränklein BP Hydraulische horizontale Bündelpresse / Hydraulic horizontal bunch press Pressdruck stufenlos einstellbar / Infinitely adjustable pressing pressure: 0 – 2,500 kg Einsatzlänge / Infeed length max. 770 mm Klsdpfxjiwg A Ee Af Nsl Pressplattengröße / Press plate dimensions: 290 x 220 mm Online video inspection available via Skype We would be pleased to welcome your visit – more machines in stock Available immediately – Inspection possible Located in Emskirchen / Nuremberg – Available for testing

Leto izdelave: 1997, Stanje: rabljeno, Grinding length: 1250 mm Grinding width: 350 mm Workpiece height: 450 mm CNC control: Sinumerik 840D Rotary table diameter: 1200 mm Table size: 2 x (760 x 325) mm Longitudinal travel: 800 mm Vertical travel of grinding support: 450 mm Cross travel of grinding support, max.: 350 mm Distance table surface / spindle center (horizontal): 600 mm Grinding wheel drive: 50 kW Grinding wheel dimensions: 400 x 160 mm Feed rate (X / Y / Z): 30 / 3 / 3 m/min Ksded Tcnlepfx Af Noll Smallest increment: 0.001 mm Speed range: 200 - 4000 rpm Total power requirement: 82 kVA Machine weight: approx. 16 t Space requirement: approx. 7.00 x 3.30 x 3.00 m CNC Grinding Center Mägerle MGC 130-32-45 with FIBRO 1200 mm rotary table and 2 clamping surfaces of 760x325 mm each, allowing loading during the grinding process. Machine is being sold as partially overhauled.

Stanje: rabljeno, Leto izdelave: 1987, Grinding length: 520 mm Grinding width: 160 mm Workpiece height: 300 mm Electromagnetic chuck: WxD = 520 x 160 mm Wheel diameter: 230 mm Year of manufacture: 1987 Machine weight approx.: 1.5 t Required space approx.: LxWxH 1.5 x 1.8 x 1.6 m - Universal surface grinding machine with rapid vertical traverse - Hydraulic table drive - External control cabinet with oil cooling for improved dimensional accuracy of the machine Klodpscxxy Uefx Af Nel - Accessories: Coolant system

Stanje: dober (rabljeno), Stable log carriage for horizontal saw frame or band saw Length approx. 9.0 m. Gauge 920 mm. 6 clamping supports. With hydraulic feed. Ksdpfetqd Naox Af Nsll Also suitable for loading drying chambers, etc.

Stanje: novo, Semi-automatic metal bandsaw with high cutting accuracy. This machine offers stepless mitre cuts: 90° cuts as well as mitre cuts to the left up to 45° and to the right up to 30° (swivel range left 45° and right 60°). Standard Features: - Large, rotatable support table without wear! (The saw band cut channel rotates with the mitre) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic workpiece clamping via short-stroke cylinder Klsdpfx Afectgkzs Nsl - Saw frame height limitation via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – pipes) - Lowering of the saw arm by means of a hydraulic cylinder; stepless adjustment - Easy manual sliding of the vice left/right - Electric band tension monitoring with saw band breakage control - Coolant pump with dual feed to the saw band guides - Carbide saw band guides and guide rollers - Bi-metal saw blade M 42 - Swarf brush Technical Data ● Cutting range: 90° round 250 mm / flat 320 x 235 mm / square 235 x 235 mm 45° R round 220 mm / flat 230 x 210 mm / square 210 x 210 mm 45° L round 180 mm / flat 205 x 160 mm / square 160 x 160 mm 30° R round 130 mm / flat 130 x 105 mm / square 105 x 105 mm ● Drive power: 1.5 kW // 400 V // 50 Hz ● Total connection load: 3.35 kVA ● Band speed: 20–120 m/min, stepless ● Saw band dimensions: 2910 x 27 x 0.9 mm ● Remnant piece length: 20 mm ● Smallest ø: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1480 x 2000 mm ● Weight: 410 kg Price on request!

Stanje: rabljeno, Grinding length: 650 mm Grinding width: 450 mm Workpiece height: 425 mm (without magnetic chuck) Max. workpiece weight: 600 kg Machine weight approx.: 3.8 t Total power requirement: 15 kW Machine dimensions approx. W x H x D: 3.0 x 2.4 x 2.3 m Used/overhauled surface grinding machine, manufacturer GER, type RSA-650. Automatic feed on all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy verified. SCOPE OF OVERHAUL: Machine completely dismantled, all components thoroughly cleaned and checked for full functionality. Main spindle re-bedded with new bearings, runout 3 µm. All guideways hand-scraped to new machine geometry. Worn parts replaced, defective components repaired or replaced. Reassembly, complete function check and internal acceptance. Machine repainted. Machine in flawless, production-ready condition. MEASURED GEOMETRICAL ACCURACIES: Current geometrical accuracy after overhaul, tested with dial gauge Geometry of X and Z machine axes X = longitudinal axis 650 mm Z = cross axis 450 mm Measurement performed with dial gauge across magnetic chuck. X-axis = max. deviation 0.008 mm Z-axis = max. deviation 0.005 mm INCLUDING THE FOLLOWING ACCESSORIES: - Electro-magnetic chuck, with fine longitudinal pole spacing Dimensions 600 x 400 mm - Demagnetizing device - Complete coolant system with paper band filter - Digital readout for vertical axis (Y-axis), manufacturer Sony - Technical documentation in English - 1 grinding wheel arbor - 1 used grinding wheel - 1 grinding wheel dresser, mounted above the grinding wheel with manual infeed and automatic (hydraulically operated) cross feed - 1 set of levelling elements For further information, please refer to the attachment. Kledpfx Asfkg H Tjf Nsl Payment: 100% prior to loading the machine Warranty: 6 months on machine geometry and demonstrably installed new parts. No general statutory warranty.

Stanje: novo, Cutting range at 90 degrees: round 310 mm Cutting range at 90 degrees: square 280 mm Cutting range at 90 degrees: rectangle 400x250 mm Saw blade length 4020x34x1.1 mm Blade speed 18 - 100 m/min Table height 890 mm Total power requirement 2.2 kW Machine weight approx. 0.99 t Space required approx. 1.85 x 2.2 x 2.0 m Mitre Band Saw, Fully Automatic, GBS 310/400 VA-I CNC - Mitre left 45° automatic operation - Mitre left 60° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gearbox cast in one piece, ensuring very quiet and low-vibration operation - Removable chip tray (for cleaning/disinfection) - Impact-resistant and ergonomic control panel with oil-resistant EPDM cover - Excellent access to saw, material, and feed unit - Folding safety cover - Fine adjustment for feed - Semi-automatic cutting Klodpsd Iiprjfx Af Njl - Optimize workflows with CNC control: possibility to input various parameters such as quantities and material lengths, automatic calculation of the cutting channel - CNC control for 10 different sawing programs, each with up to 99 subprograms for different lengths and quantities, e.g. one cutting program with various section lengths - Automatic feed unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for section lengths from 2 mm up to 9,999 mm, remnant length 170 mm.

Stanje: novo, Cutting capacity at 90 degrees (round): 240 mm Cutting capacity at 90 degrees (square): 240 mm Cutting capacity at 90 degrees (rectangular): 165 x 310 mm Saw blade length: 2,725 x 27 x 0.9 mm Table height: 940 mm Ksdpfx Aefgyh Hjf Noll Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight: approx. 0.4 t The Z252/DGH is equipped with: - Hydraulic semi-automatic operation - Double mitre, 60° left / 45° right - Emulsion pump - Machine base - Saw blade - 400V, 16A plug The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870 x 600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Blade speed 15 - 90 m/min Table height 855 mm Kedpfxefg E Hns Af Noll Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirements approx. 5.75 x 4.2 x 2.75 m 2-column double mitre band saw designed for high-speed cutting with pusher system P15. Optionally with P30 Hydraulic lowering of the saw frame • NC controlled • Automatic angle positioning from +60° to -60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved using the new "B&S positioning system". An intelligent NC control system ensures smooth interaction between the linear encoder and the self-braking positioning motor in combination with a reliable hydraulic brake by means of large-radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC control CNC control allows the programming of up to 90 cutting programs with different cut lengths, quantities and mitre angles. Dual-side clamping positioning system The B&S pusher system – feed and positioning system – is equipped with "double-sided opening grippers" which are hydraulically operated. This guarantees safe gripping and transport of materials and bundles that deviate slightly from their ideal shape. The pusher system is independently mounted and guided via ball-bearing linear guides, precision ground rack, and a frequency-driven, robust gear motor.

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cut width: 300 x 180 mm Speeds: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight: approx. 450 kg Space requirement: approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts: left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting: extremely quiet and low-vibration operation • Hydraulically operated vice, laterally adjustable • Guided, high-quality industrial bearings • Heavy-duty vice and machine cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable cutting pressure feed regulator • Support roller on infeed side • Ball-bearing rotary table Semi-automatic operation: Kledpfxofn Andj Af Nsl 1. Clamp material 2. Start saw 3. Rapid descent to material start or, for serial cutting, start cutting immediately 4. Stop saw band 5. Raise frame slightly above the material 6. Open vice

Stanje: novo, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Kedpfxjfb Nbfo Af Nsll Cutting diameter flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL OFFER PRICE!!!! 2-Column Heavy-Duty Bandsaw Machines of the SBS Series The SBS series impresses with advanced technology, high quality, durability, and an unrivalled comprehensive standard configuration. • Modern SNC 20 controller for CNC models • Frequency-controlled saw drive • Control buttons featuring pictograms • Work light • Powered chip brush • Hydraulic blade tensioning • Clamping pressure adjustment • Double vice (in front of and behind the band) • Creep speed for positioning • Bundle clamping prepared for electric and hydraulic operation • Chip conveyor The SNC 20 controller allows convenient and straightforward input of up to 20 different cutting programs (length and quantity). When the target dimension is entered, the control system automatically calculates the trim loss and the number of feed strokes. Furthermore, the error code display system provides rapid diagnosis for troubleshooting.

Stanje: novo, Cutting diameter: 227 mm Kjdpfx Aofgyh Esf Nsll Saw band length: 2455 mm Table height: 840 mm Cutting width: 260 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting area at 90 degrees (round): 227 mm Cutting area at 90 degrees (square): 220 mm Cutting area at 90 degrees (flat): 260 x 220 mm Cutting area at 45 degrees (round): 150 mm Cutting area at 45 degrees (square): 145 mm Cutting area at 45 degrees (flat): 200 x 220 mm Total power requirement: 1.5 kW Machine weight approx. 0.25 t Space requirement approx. 0.8 x 1.4 x 1.5 m Mitre band saw - automatic cutting - base frame - coolant pump - chip brush for saw blade cleaning - quick-adjust vice

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° / right 45° • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration operation • Hydraulically movable vice • Guided, high-quality industrial bearings • Heavy-duty vice & machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball-bearing turntable Klodpfx Aefgyh Uef Nel Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material or, for series cutting, direct cutting 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw band length 3375 x 27 x 0.9 mm Ksdpefgyiaofx Af Nsll Band speed 18 – 100 m/min Table height 940 mm Total connected load 1.5 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing turntable - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw Kjdpefgyicjfx Af Noll 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting range at 90°: round 680 mm Cutting range at 90°: square 640 mm Cutting range at 90°: rectangle 1250x600 mm Saw band length: 8140x54x1.6 mm Band speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight approx. 4.96 t Space requirement approx. 5.7 x 4.0 x 2.75 m 2-column bandsaw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (optional). Fast, smooth, and ergonomic cutting Specially designed for cutting profiles and beams as well as solid material. The material is clamped vertically on both the infeed and outfeed sides. Starting from model K-tech 800 H, the machine is equipped as standard with an additional horizontal vice. The interplay of hydraulic saw frame descent, material positioning, and the pusher system is CNC-controlled. The machines are equipped as standard with the environmentally friendly "B&S Clean Cut" cutting system with minimum quantity lubrication. This reduces cleaning requirements and conserves resources. CNC control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. Kedjfgyigjpfx Af Nsll The B&S pusher system, feeding and positioning unit, is equipped with 'double-sided opening clamping jaws' which are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate somewhat from the ideal shape. The pusher system is built separately and is guided via ball-bearing linear guides, precision-ground rack, and a frequency-driven, robust geared motor.

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices Kjdpfx Aofg E Hlof Nsll • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Ksdpfed Iipxex Af Nell Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system