Vodič In Nasveti Do 500 Mm Vretena Stružnica nakup rabljenega (153.214)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized Hodomhh Dhjpfx Ah Djfn - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Leto izdelave: 2020, Stanje: skoraj kot novo (rabljeno), Conical rollers 550 mm for log transport Robust construction, good condition Hfedpegvvvlefx Ah Djn 2 units available Roller length: 800 mm Roller diameter: 400 mm Shaft diameter: 45 mm 2 INA pedestal bearings Sprocket: z = 25, zt = 30, diameter: approx. 280 mm

Stanje: rabljeno, null D: 1800, Š: 1500, V: 1800 (mm). Izdelek: Valjasti zabojnik. Tip: Voziček za prevoz pohištva. Izvedba: L-okvir, možnost gnezdenja in zlaganja. Skupina: Rabljeni valjasti vozički. Material: jeklo. Stene: mreža. Dno: les. Barva: zelena. Obdelava površine: lakirano. Notranja dolžina (mm): 1660. Hodpfxow Sxuco Ah Dsfn Notranja širina (mm):

Stanje: rabljeno, Aluminum silo on foot ring (plastic granulate silo) – used – designed for a bulk density of 0.6 kg/dm³ Volume: 50,000 l Manufacturer: EVS Available units: 2 Diameter: approx. 3,500 mm Cylindrical height: approx. 6,900 mm Total height: approx. 8,100 mm (incl. 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Top head slope: 15° Cone slope: 60° Features and connections: At the top head: - 1 x access manhole DN 600 with hinged cover - 1 x vent nozzle - 1 x roof edge railing with handrail - 2 x crane lugs - 1 x flange for filling line - 1 x block flange for measuring and control equipment At the shell: Hedpjww Em Defx Ah Defn - 1 x access door approx. 870 x 1,960 mm - Various pipe brackets for filling pipe - 1 x filling pipe NW 80 - 1 x nozzle for level indicator One of the silos additionally features a single-run access ladder with fall protection. Otherwise according to pictures and drawing.

Stanje: dober (rabljeno), Conveyor belt rollers, transport rollers, drum motor, conveyor belt motor, drum drive, drive drum, motorized roller, - Manufacturer: Ackrutat, drive drum drum motor - Type: unfortunately without type designation - Voltage: 380 V - Power: 0.36 kW - Speed: 22 m/min Hfedpfx Ahettntvs Don - Drum: Ø 126 mm - Drum length: 500 mm - Shaft: Mounting dimensions see photo technical drawing - Total dimensions: Ø 126 x 610 mm - Weight: 23.1 kg

Stanje: dober (rabljeno), Type: Light-duty roller conveyor curve 60° Item no.: 230954 Overall dimensions: 1,020 x 550 x 130 mm (LxWxH) Side frame width: 25 mm Side frame height: 65 mm Conveying width: 500 mm Curve (degrees): 60° Inner curve radius: 475 mm Outer curve radius: 1,020 mm Roller type: Plastic Rollers per axle: 3 pcs. Roller length: 165 mm Hedpfx Aeqctkxoh Dofn Roller pitch, inner: 43 mm Roller pitch, outer: 88 mm Roller diameter: 40 mm Drive type: Gravity Special features: 65 mm outer side guide Condition: Used / fully functional Function check: OK

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Hfjdpfxomhhl Hs Ah Den Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 319 00 00347, Schüco PDG E Cut Ø500 mm klinger. Ekstra klinger tilgængelige. Maskinen er velholdt og fungerer perfekt. Hedpfjwbt E Nox Ah Dofn

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, New lathe with large spindle bore. Brand: KMS Model: CS6266C Centre distance: 2000 mm Swing over bed: Ø 660 mm Swing over cross slide: Ø 420 mm Swing in gap: Ø 870 mm Turning length in gap: 240 mm Bed width: 390 mm Spindle bore diameter: Ø 105 mm Spindle speeds: 12 (36 - 1600 rpm) Tailstock quill diameter: 75 mm Tailstock travel: 150 mm Tailstock taper: MT 5 Machine dimensions: approx. 3600 x 975 x 1270 mm (L x W x H) Machine weight: approx. 3100 kg Machine equipped with: - Longitudinal and cross feed - Rapid traverse for longitudinal and cross feed - Movable and adjustable stops for automatic longitudinal feed - Leadscrew for threading (metric / imperial / module / DP threading possible) - Quick-change tool post (type Multifix is optional) - 2-axis digital readout (brand: Sino) - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock) - 4-jaw chuck Ø 400 mm, bore 105 mm (Camlock) - Face plate Ø 630 mm (Camlock) - Fixed steady rest Ø 120–Ø 260 mm Hjdpow A H H Njfx Ah Defn - Follow rest Ø 20–Ø 80 mm - Coolant system

Stanje: delavnici obnovljeno (rabljeno), Debarker for logs with diameters from 130 to 700 mm. Hfjdpfxowfz Iyo Ah Den

Stanje: rabljeno, Height scribe, parallel scribe Hfedsb Uhi Depfx Ah Djn - Max. working height: 500 mm - Carbide-tipped needle - Dimensions: 230/80/H650 mm - Weight: 3.4 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. Hodemkixwjpfx Ah Dsfn The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: rabljeno, Height scriber, parallel scriber - Max. working height: 500 mm - Carbide-tipped needle Hfedpfeb Uhi Iex Ah Dsn - Dimensions: 615/120/H75 mm - Weight: 2.7 kg

Stanje: dober (rabljeno), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, swing cylinder Hjdpfxev I S Eie Ah Dsfn - Manufacturer: Orsta, double-acting hydraulic cylinder, stroke 500 mm Type: S1-32/20x500 - Piston rod: Ø 20 mm - Mounting: bolt circle Ø 85 x 8 mm - Dimensions: 710/83/H103 mm - Weight: 5.5 kg

Stanje: zelo dobro (rabljeno), Hanger clamp, helmet rail bracket, helmet rail, running rail, rail bracket, clamping sleeve, sliding gate sleeve - Manufacturer: Helm, Running rail (Helmet rail) - Type: Profile 500 - Length: 250 mm - Dimensions: see photos - Quantity: 122x helmet rails available - Price: per piece / minimum purchase 2 pieces - Dimensions: 250/65/H60 mm - Weight: 1.3 kg/unit Hsdpfxev R Tdrj Ah Dsfn

Stanje: rabljeno, Linear actuator, linear gearbox, lifting gearbox, spindle drive, pneumatic actuator, slide, guide, electromechanical linear axis, short-stroke linear slide - Manufacturer: Linear actuator short-stroke linear slide - Type: 3 842 233 500 - Stroke: 35 mm - Dimensions: 180/60/H35 mm - Weight: 0.8 kg Hsdpjuzn Epefx Ah Defn

Stanje: rabljeno, Leto izdelave: 1984, Conveyor belt, belt conveyor, transport belt, flat belt conveyor - Manufacturer: KJ - Type: KA69 500B - Speed: 8.3 m/min Hsdpfx Ahovmndxe Djfn - Belt width: 500 mm - Conveyor length: 11,200 mm - Drive: drum motor, see type plate photo - Transport dimensions: 11,200/1,170/H230 mm - Weight: kg

Stanje: zelo dobro (rabljeno), Naprodaj je kompletna elektroerozijska naprava Waldmann & Weigl ER-220, namenjena za natančno odstranjevanje zlomljenih svedrov, navojnih orodij in rezalnih orodij. Profesionalna delavniška rešitev iz Nemčije, idealna za orodjarne, servise in strojne delavnice. • Proizvajalec: Waldmann & Weigl GmbH, Nemčija • Model: ER-220 • Napajanje: 220 V / 50 Hz • Delovni tok: 1,5 A • Obseg elektrod: od Ø1,0 mm do Ø10 mm (bakrene, cevne) • 6-stopenjska nastavitev napetosti erozije (od nežnega do intenzivnega žganja) • Nosilec elektrode z nastavljivo višino • Hladilna črpalka z vodnim rezervoarjem • Nadzorna plošča z izbiro načinov delovanja • Popolna dokumentacija v nemškem jeziku (originalna navodila) • Celota je nameščena na mobilni delavniški mizi s kolesi Stroj je popolnoma delujoč, kompleten in pripravljen za uporabo. Nepogrešljiv za hitro in varno odstranjevanje zlomljenih orodij iz obdelovancev brez tveganja poškodbe elementa. Hfedpfxew Syyys Ah Djn

Stanje: dober (rabljeno), The scope of delivery includes: 01x rear wall mesh panel, used Material finish: Sendzimir galvanized Overall width: approx. 2,700 mm Overall height: approx. 1,500 mm Mesh size: approx. 103 x 53 mm Mesh size (extension): approx. 53 x 53 mm Hfjdpfjipuh Eox Ah Den Frame profile dimensions: L approx. 30 x 30 mm Wire thickness: approx. 1.75 mm Hole diameter: approx. 7 mm Hole pitch: approx. 25 mm Weight per unit: approx. 10.40 kg

Leto izdelave: 2015, Stanje: dober (rabljeno), We are offering a used bin rack for sale. This rack is ideal for lighter bins but can also accommodate cardboard boxes without any issues. The bin rack can be individually adjusted to suit your requirements. Both the inclination angle of the roller tracks and the distance between levels can be quickly and easily adjusted with an Allen key. Each level features guide rails on both sides and a stop on one side, ensuring bins or cartons are protected against accidental falling. Technical data and further information: Manufacturer: Beewatec Model: Cardboardrack 1 lane 19032-01 Year of manufacture: approx. 2015 Hsdpohiyhwjfx Ah Dsfn Notes: The rack is delivered pre-assembled as shown in the pictures. Scope of delivery: 01x bin rack, used Overall length: approx. 2,500 mm Overall depth: approx. 610 mm Overall height: approx. 1,915 mm Internal depth: approx. 485 mm Net weight: approx. 160 kg Load capacity per level: approx. 15 kg Load capacity, total rack: approx. 100 kg Number of levels: 04 pcs. Number of roller tracks per level: 02 pcs. Tube diameter (frame): approx. 27 mm Roller track length: approx. 2,430 mm Roller track profile dimensions: approx. 42 x 35 mm (W x H) Roller width: approx. 25 mm Roller pitch: approx. 35 mm Frame color: galvanized Roller color: cream white Roller track frame color: galvanized Includes label holders Includes guide rails: approx. 2,450 mm Includes end stop: approx. 30 mm General information about the item: This item is only available for collection. Should you require transport or shipping, please note this is subject to additional costs, which can be quoted separately depending on the delivery location and scope.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1980, Bandwidth: 1,500 mm Hsdpsqw Akmofx Ah Dofn Strip thickness: 0.6 – 3 mm Coil weight: 10 t

Stanje: pripravljen za uporabo (rabljen), A universal oven by Memmert and a climate chamber by Binder are available. 1) Memmert UM 500: temperature range 30°C to 200°C, volume 108 l, internal dimensions (W/D/H): 560 mm x 480 mm x 400 mm, external dimensions (W/D/H): 710 mm x 760 mm x 550 mm. 2) Binder KBF 240: temperature range 0°C to 100°C, volume 240 l, power: 2.2 kW, max. operating pressure: 15 bar, refrigerant: R134a, internal dimensions (W/D/H): 800 mm x 600 mm x 500 mm, external dimensions (W/D/H): approx. 1050 mm x 1150 mm x 750 mm. Documentation is available. On-site inspection possible. Hjdewlt Nispfx Ah Djfn

Stanje: novo, Aluminum sliding table (anodized) with hardened steel guide rods. Anti-kickback device in thickness planer. Anodized parallel fence with micrometric fine adjustment. Saw blade tilting up to 45° via handwheel. Table opening ø190 mm with below-table extraction. Milling fence 180 mm. Integrated spindle lock. Outfeed table with telescopic stop, eccentric clamp, graduation scale. 100% Made in EU (designed, built, quality-checked) Technical specifications: Planer unit: Table width: 410 mm Table length: 1800 mm Cutterblock diameter: 100 mm Number of planer knives: 4 pcs Cutterblock speed: 5000 rpm Hedpfx Aevrvcash Dofn Motor output power: 5 kW S6 400V (4kW S1) Thicknessing unit: Min/max workpiece height: 4 - 230 mm Feed speed: 7 m/min Spindle moulder: Usable spindle length: 125 mm Spindle height adjustment: 160 mm Max. tool diameter for profiling: 180 mm for tenoning: 250 mm Spindle speeds: 8000/6000/3500/1400 rpm Table opening: 190 mm Integral fence: 500 mm Motor output power: 3.8 kW S6 400V (3kW S1) Circular saw: Sliding table: 2300 x 285 mm Max/min saw blade diameter: 315 mm / 250 mm Tilting range: 90° - 45° Max. cutting height: 90° 45° Saw blade 315: 102/72 Motor output power: 3.8 kW S6 400V (3kW S1) Weight: 900 kg Optional special accessories: Reversible knives (no surcharge) Spiral cutterblock Slot mortising unit Scoring unit

Stanje: novo, Leto izdelave: 2025, vrsta goriva: dizel, proizvajalec motorjev: Cummins 6ZTAA13-G4, Intended use: Construction Unladen weight: 4,830 kg Generator output: 500 kVA CE marking: yes Serial number: 20250405003 Water tank capacity: 800 l Hfedpfx Ahjw Altus Djn Transport dimensions (L x W x H): 4.25 x 1.6 x 2.4 m Please contact Kenny Bongers, Tijmen Pesselse, or Arjen van Dijk for further information.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna masa: 1.030 kg, največja hitrost vrtenja: 2.500 obr/min, premer struženja nad prečnim suportom: 320 mm, prehod palice: 56 mm, moč vretenovega motorja: 3.700 W, montažni premer: 16 mm, izvrtina vretena: 56 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 150 obr/min, stružna dolžina: 750 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Technical Specifications Distance between centers 750 mm Center height 160 mm Swing diameter over bed 320 mm Swing diameter over cross slide 150 mm Bed width 215 mm Spindle bore 56 mm Spindle mount A2-5 Stepless speed range 150 - 2500 rpm Travel X-axis / Z-axis 160 mm / 750 mm Rapid traverse X- / Z-axis 4 / 7 m/min Number of tool stations 6 pcs. Tool shank dimension 16 x 16 mm Hfodjwh Aiwepfx Ah Djn Positioning accuracy ± 0.01 mm Quill diameter 45 mm Quill travel 100 mm Quill taper MK 4 Motor power 3.7 kW Machine dimensions (W x D x H) 1910 x 1150 x 1840 mm Weight approx. 1030 kg