Vertical Filling Sugar Mashine nakup rabljenega (11.381)

Stanje: novo, Leto izdelave: 2025, Vertical weighing and filling system for prefabricated large bags/sacks. Suitable for granular products such as seeds, pet food, wood pellets, etc. The system includes product feed, automatic weighing unit, conveyor belt, and sealing OR sewing module. The prefabricated bags are manually inserted into the pneumatic clamp holder by hand. The product is portioned by weight and filled into the bag. The bag is then conveyed by the conveyor belt to the sealing or sewing module for sealing or stitching. Fpedpfx Afjv Nm Dpeljb – Specifications: Weighing range: up to max. 25kg; max. machine cycle rate (unloaded): 200 bags/hour; accuracy: ±0.2% FS; power: AC 220V/380V, 50Hz, 2kW; compressed air: 6bar, 0.17 m³; all product contact parts made of stainless steel AISI 304; system dimensions depend on the final layout and can be customized. The machine/system is also available in other versions for various packaging sizes and speeds. Please note that our new equipment prices are often below the usual used equipment prices. Feel free to contact us and let us know your packaging requirements. – We typically have 30–50 different new machines immediately available from stock. For custom-made machines, we offer very short delivery times starting from approx. 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal machine for the production of pillow bags with back seam and gusseted stand-up pouches (gusset former required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photoelectric sensor (print mark detection) for sealing/cutting position; servo-driven end sealing unit; servo motor for film draw-off; ribbon coder for batch number, date, and expiry date (best before date). - VFFS machine specifications: max. machine cycle rate (idle): 90 cycles/minute; bag size: L(40-200)xW(30-150)mm; suitable film width: 80-320mm; product-contact parts made of AISI 304 (optionally, AISI 316 at additional cost); power supply: 220V, 50/60Hz; power consumption: 4kW; required compressed air: 0.7MPa; compressed air consumption: 0.1-0.3m³/min; weight: 320kg. Please note that our new prices are often below typical used equipment prices. Feel free to send us an enquiry and tell us about your packaging requirement. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are supplied with full warranty. Fpjdpfx Afov Nncasleb

Stanje: novo, Leto izdelave: 2025, Vertical Form-Fill-Seal (VFFS) packaging machine for producing pillow bags with back seal and gusseted stand-up pouches (gusset tool required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photoelectric sensor (registration mark detection) for sealing/cutting position; servo-driven end-sealing unit; servo motor for film transport; thermal transfer printer for batch number, date, and best-before date. Fjdpfx Afov Nncyolopb Specifications VFFS machine: max. machine cycle rate (idle): 85 cycles/minute; bag size: L(60-340)xW(70-250)mm (dual film draw-off L = 500mm), gusseted stand-up pouch: L(60-340)xW(60-200)xD(30-90)mm (dual film draw-off L = 500mm); suitable film width: 160-520mm; product-contacting parts made of AISI 304 (optionally AISI 316 at surcharge); power supply: 220V, 50/60Hz; power consumption: 5.4kW; required compressed air: 0.7MPa; air consumption: 0.15-0.35m³/min; weight: 510kg. Please note: our new machine prices are often lower than standard used equipment prices. Feel free to contact us with your packaging requirements. - We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting at approx. 3 weeks. - All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal machine for producing pillow bags with back seam and gusseted stand-up pouches (gusseting tool required). Equipped with: quick-change forming set, SIEMENS PLC, WEINVIEW touchscreen, photoelectric sensor (print mark detection) for sealing/cutting position, servo-driven end sealing unit, servo motor for film transport, thermal transfer printer for batch number, date, and expiration date. - VFFS Machine Specifications: Maximum idle cycle rate: 75 cycles/minute; Bag size: L(60-380)xW(130-300)mm (double film draw-off L = 650mm), Gusseted stand-up pouch: L(60-380)xW(80-250)xD(30-100)mm (double film draw-off L = 650mm); Suitable film width: 280-630mm; Product-contact parts: AISI 304 (optionally AISI 316 at extra cost); Power supply: 220V, 50/60Hz; Power consumption: 5.6kW; Required compressed air: 0.7MPa; Air consumption: 0.25-0.35m³/min; Weight: 600kg. Please note that our new prices are often below typical used machine prices. Feel free to contact us with your packaging requirements. We usually have 30-50 different new machines available immediately from stock. For custom-built machines, we offer very short lead times starting from around 3 weeks. All machines are available with full warranty. Fsdpfx Aev Nnc Tjflspb

Leto izdelave: 2025, Stanje: novo, Vertical form-fill-seal (VFFS) packaging machine for the production of pillow bags with back seal and gusseted stand-up pouches (gusset tooling required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photo sensor (print mark detection) for sealing/cutting position; servo-driven end seal unit; servo motor for film feed; thermal transfer printer for batch number, date, and best-before date (BBD). - Specifications VFFS machine: max. machine speed idle: 60 cycles/min; bag size: L(60-500)xW(120-410)mm (with double film feed L=800mm), gusseted stand-up pouch: L(60-500)xW(100-350)xD(40-150)mm (with double film feed L=800mm); suitable film width: 260-850mm; product-contacting parts made of AISI 304 (optional: AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 8.0kW; compressed air required: 0.7MPa; compressed air consumption: 0.25-0.40m³/min; weight: 770kg. Fedpfov Nndwox Aflspb Please note that our new prices are often lower than typical used equipment prices. Simply send us your enquiry and let us know your packaging requirements. – Generally, 30-50 different new machines are always available from stock for immediate delivery. For customer-specific machines, we offer very short lead times from approx. 3 weeks. – All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for the production of pillow bags with back seam, gusseted stand-up pouches (gusseting tool required), OR for pyramid-shaped bags (special sealing unit required). Equipped with: touchscreen; PLC; photoelectric sensor (register mark detection) for seal/cut positioning; pneumatic end-sealing unit; servo motor for film feed; thermal transfer printer for batch numbers, date, best-before date. - VFFS machine specifications: max. machine cycle rate (no load): 40 cycles/minute; bag sizes: L(40-650)xW(140-450)mm (double film feed for longer bags possible); suitable film width: 220-920mm; product-contacting parts made of AISI 304 (optionally AISI 316 available at extra cost); power supply: 220V, 50/60Hz; power consumption: 4.5kW; required compressed air: 0.2-0.8MPa; compressed air consumption: 1.0m³/min; dimensions (LxWxH): 2470*1730*2065mm; weight: 1150kg. Fjdpfx Afov Nnd Delopb Please note that our new machine prices are often below the usual second-hand prices. Just inquire and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from about 3 weeks. - All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for producing pillow bags with back seam and gusseted stand-up pouches (gusset tool required). Equipped with: quick-change forming set, SIEMENS PLC, WEINVIEW touchscreen, photoelectric sensor (print mark detection) for sealing/cutting position, servo-driven sealing unit for end sealing, servo motor for film feed, thermal transfer printer for batch number, date, and best before date. Fpodpfx Afov Nnd Roljb - VFFS Machine Specifications: Maximum machine cycle rate (unloaded): 45 cycles/min; Bag size: L(60-500)xW(200-510)mm (double film feed L = 900mm), Gusseted stand-up pouch: L(60-500)xW(140-420)xD(60-200)mm (double film feed L = 900mm); Suitable film width: 420-1050mm; Product-contact parts made of: AISI 304 stainless steel (AISI 316 available at extra cost); Power supply: 220V, 50/60Hz; Power consumption: 8.5kW; Required compressed air: 0.7MPa; Air consumption: 0.25-0.40m³/min; Weight: 980kg. Please note that our new prices are often below typical used machinery prices. Feel free to inquire and describe your packaging requirements. Generally, 30-50 different new machines are available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from approximately 3 weeks. All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal machine for producing pillow bags with back seal, gusseted stand-up pouches (gusseting tool required) OR pyramid-shaped bags (special sealing unit required). Equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing/cutting position; pneumatic sealing unit for end sealing; servo motor for film draw-off; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: max. idle cycle rate: 40 cycles/minute; bag size: L(40-700)xW(165-515)mm (double film draw-off possible for longer bags); suitable film width: 300-1050mm; product-contact parts: AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 5.5kW; required compressed air: 0.2-0.8MPa; compressed air consumption: 1.2m³/min; dimensions (LxWxH): 2430*1860*2140mm; weight: 1250kg. Fsdpsv Nnfbofx Aflepb Please note that our new machine prices are often lower than typical used equipment prices. Feel free to contact us and let us know your packaging requirements. - We typically have 30-50 different new machines available immediately from stock. Additionally, for custom-built machines, we offer very short delivery times starting from approx. 3 weeks. - All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal (VFFS) machine for producing pillow bags with longitudinal seam and gusseted stand-up pouches (gusset tool required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photoelectric sensor (print mark detection) for sealing/cutting position; servo-driven sealing unit for end sealing; servo motor for film feed; thermal transfer printer for batch number, date, best before date. - Specifications VFFS machine: max. machine cycle rate (unloaded): 30 cycles/minute; bag size: L(60-600)xW(200-585)mm (double film draw-off L = 1100mm), gusseted stand-up pouch: L(60-600)xW(140-500)xD(100-250)mm (double film draw-off L = 1100mm); suitable film width: 420-1200mm; product-contacting parts made of: AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 8.7kW; required compressed air: 0.7MPa; air consumption: 0.25-0.40m³/min; weight: 1060kg. Fpjdpfx Aev Nnfnsfleb Please note that our new machine prices are frequently lower than typical used machine prices. Simply inquire and let us know your packaging requirements. - Generally, 30-50 different new machines are available immediately from stock. For custom-built machines, we offer very short lead times from approx. 3 weeks. - All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine, high-speed version with continuously operating rotary sealing jaws, suitable for flat bags and gusseted bags, equipped with MITSUBISHI PLC, WEINVIEW touchscreen control monitor, automatic program setup, registration mark sensor, quick-change forming unit, servo-driven sealing unit, servo motor for film transport, double feed possible. - Specifications: Bag size: L(50-300)xW(50-240)mm (single pulling); film width: 130-510mm; max. machine cycle rate (no load): 180 cycles/min; stainless steel; 380V/9.0kW; 6 bar, 0.25m³/min; machine dimensions: L1700xW1300xH1700mm; weight: 700kg. Fpjdpjv Nmydsfx Aflsb Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us and tell us about your packaging requirements. – Typically, 30–50 different new machines are available ex stock for immediate delivery. For customer-specific builds, we offer very short delivery lead times starting from approx. 3 weeks. – All machines are available with a full warranty.

Leto izdelave: 2025, Stanje: novo, Vertical packaging machine, high-speed version with rotary sealing knives, suitable for flat bags, MITSUBISHI PLC, WEINVIEW touchscreen operating monitor, automatic program setup, registration mark sensor, quick-change forming unit, sealing unit with servo motor, servo motor for film transport, dual transport possible. - Specifications: Bag size: L(80-500)xW(70-265)mm (single-pulling); Film width: 170-560mm; max. machine cycle rate idle: 180 cycles/minute; stainless steel; 380V/7.5kW; 6 bar, 0.25 m³/min; machine dimensions: L1500xW1200xH1620mm; weight: 700kg. Fsdjv Nmykspfx Afljpb Please note that our new prices are often below the usual prices for used machines. Feel free to contact us and tell us about your packaging requirements. - We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. - All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, Packaging system for dosing and filling granulates into pre-made bags, followed by vacuum sealing of the bag. Working steps: Bag removal, dosing of granulate via scale, shaping the bag into a brick form prior to filling, vacuuming and sealing, and discharging the bag. Suitable for granular materials such as coffee beans, grains, rice, animal feed, seeds, beans, peanuts, salt, chemical fertilizers, etc. PLC controlled, operation via touchscreen. Suitable for poly bags. Fodev Nm Afepfx Afljpb — Specifications: Filling range: 500–5000g; Accuracy: ±5g; Maximum machine cycle rate (idle): 9 cycles/minute; Power: 380V, total 5kW; Compressed air: 0.85m³/min, 6–8 bar; Machine dimensions: L2260×W2925×H2500mm. Please note that our new prices are often below typical used prices. Feel free to inquire and tell us about your packaging requirements. — We usually have 30–50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short lead times starting from around 3 weeks. — All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical filling system for dosing and filling powder into pre-made large bags/sacks, followed by sealing and/or sewing of the bag/sack. The system consists of product feed (screw conveyor), auger doser with weight feedback, conveyor belts for transferring to the heat sealing machine and sewing machine. Pre-made bags are manually placed by hand into the pneumatic clamp holder. The product is dosed and filled into the bag. Subsequently, the filled bag is manually guided via conveyor belt to the sealing or sewing module and either heat-sealed or sewn. Fpjdpfx Asv Nm D Noflob – Auger Doser Specifications: Weight range: 10–50 kg (by changing the dosing screw); Accuracy: +/-0.5%; max. machine cycle rate in idle: 8 cycles/min; Feed hopper capacity: 100 L; Power supply: 380V, 50Hz, 3kW; Stainless steel version AISI 304; Machine dimensions: L1150xW1000xH2550mm; Weight: 450 kg. – Screw Conveyor Specifications: Throughput depending on product: up to 5 m³/h; Hopper capacity: 100 L; Tube diameter: 159 mm; Standard angle: 45° (optional customization 30–60°); Power: 3P, 380V; Machine dimensions: L1160xW890xH1000mm; Weight: 150 kg. – Heat Sealing Machine Specifications: Suitable for bags with H: 450–750 mm; Sealing angle adjustable by 20°; Machine dimensions: L720xW560xH1340mm; Weight: 100 kg. – Sewing Machine Specifications: Suitable for bags with H: 400–900 mm; Wrapping width: 30–50 mm, conveyor belt length: customizable. System dimensions and total weight depend on the final layout and can be customized. Please note that our new prices are often below standard used equipment prices. Feel free to contact us and let us know about your packaging requirements. We usually have 30–50 different new machines in stock and available for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. All machines come with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal (VFFS) packaging machine for the production of pillow bags with longitudinal rear seam, gusseted stand-up pouches (gusset tooling required) OR for pyramid-shaped bags (special sealing unit required). Equipped with: touchscreen; PLC; photoelectric sensor for registration mark detection (controls seal/cut position); pneumatic end-sealing unit; servo drive for film pulling; thermal transfer printer for batch number, date, and best-before date. - Specifications of the VFFS machine: max. idle cycle rate: 50 cycles/min; bag size: L(40–450) x W(105–350) mm (double film pull possible for longer bags); suitable film width: 230–720 mm; product-contact parts made of AISI 304 (optionally AISI 316 for an additional charge); power supply: 220V, 50/60 Hz; power consumption: 3.8 kW; required compressed air: 0.4–0.8 MPa; compressed air consumption: 0.8 m³/min; dimensions (LxWxH): 1996*1496*2138 mm; weight: 850 kg. Please note that our new machine prices are often below typical used machine prices. Feel free to inquire and inform us of your packaging application. – We always have 30–50 different new machines available ex-stock for immediate delivery. For machines manufactured to customer specifications, we offer very short delivery times starting from approx. 3 weeks. – All machines are delivered with a full warranty. Fpsdpfx Afov Nnddslob

Stanje: novo, Leto izdelave: 2025, High-speed version with servo-driven continuous sealing unit for the end sealing station. Suitable for producing pillow bags with longitudinal (back) seam, gusseted stand-up pouches (requires gusseting tool), OR pyramid-shaped bags (special sealing unit required). Equipped with: touchscreen display; PLC control; photo sensor (print mark detection) for seal/cut positioning; servo-driven end sealing unit; servo motor for film draw-off; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: maximum operating speed (no load): 120 cycles/min; bag size: L(40-300)xW(60-200)mm (double film pull for longer bags possible); suitable film width: 140-420mm; product-contact parts: AISI 304 (optionally AISI 316 for a surcharge); power supply: 220V, 50/60Hz; power consumption: 4.5kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.2m³/min; weight: 580kg. Please note that our new machine prices are frequently below typical used machine prices. Don't hesitate to inquire and let us know your packaging requirements. - We generally have 30-50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short delivery times, starting from around 3 weeks. - All machines come with full warranty. Fpodjv Nnfuspfx Aflsb

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for forming and sealing 3- or 4-side-seal sachets. Equipped with: touchscreen; PLC; photoelectric sensor (print mark detection) for seal/cut positioning; pneumatic sealing unit for end sealing; servo motor for film feed; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: max. idle cycle rate: 60 cycles/minute; bag size: L(40-210)xW(60-160)mm (double film feed possible for longer bags); suitable film width: 120-320mm; product-contact parts made of AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 2.4kW; required compressed air: 0.2-0.8MPa; air consumption: 0.6m³/min; dimensions (LxWxH): 1326*1066*1503mm; weight: 450kg. Please note that our new prices are often below standard used machine prices. Feel free to contact us and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock at all times. For customer-specific machines, we also offer very short delivery times starting from approx. 3 weeks. – All machines come with a full warranty. Fodov Nnf Ijpfx Aflspb

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal machine for the production of doypacks or flat pouches with or without zipper. Equipped with: touchscreen; PLC; photo sensor (print mark registration) for sealing/cutting position; pneumatic sealing unit for end sealing; servo motor for film feed; thermal transfer printer for batch number, date, expiry date. Specifications of the VFFS machine: - Maximum machine cycle rate (idle): 45 cycles/minute Fpedpfx Afev Nngfjleb - Bag size: L(120-235)xW(60-200)mm - Suitable film width: 280-520mm - Product-contact surfaces made of: AISI 304 (optionally AISI 316 at extra charge) - Power supply: 220V, 50/60Hz - Power consumption: 3.9kW - Required compressed air: 0.4-0.8MPa - Compressed air consumption: 0.7m³/min - Dimensions (LxWxH): 2090*1820*1935mm - Weight: 800kg Please note that our new prices are often below common used equipment prices. Feel free to inquire and specify your packaging requirements. Typically, we have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times, starting from approx. 3 weeks. All machines are available with a full warranty.

Leto izdelave: 2025, Stanje: novo, Vertical packaging machine for producing doypacks or flat pouches, with or without zipper. Equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing/cutting position; pneumatic sealing unit for end sealing; servomotor for film feed; thermal transfer printer for batch number, date, expiry date. - VFFS machine specifications: max. no-load machine cycle rate: 40 cycles/minute; bag size: L(140-335)xW(70-300)mm; suitable film width: 280-720mm; product-contact parts made of: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 5.8kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.8m³/min; dimensions (LxWxH): 2320*1920*2125mm; weight: 1100kg. Fpedjv Nnglepfx Afleb Please note that our new prices are often below typical second-hand prices. Simply inquire and tell us about your packaging application. – Generally, 30–50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine, specifically designed for the production of stand-up pouches with rectangular base and quad-seal (4-side sealing). Equipped with: touchscreen; PLC; photoelectric sensor (registration mark detection) for sealing/cutting position; servo-driven end-sealing unit; servomotor for film draw-off; thermal transfer printer for batch number, date, best-before date. - VFFS machine specifications: maximum idle cycle speed: 45 cycles/minute; pouch size: length (150-350)mm, front width (60-190)mm, side width (40-100)mm, (dual film draw-off possible for longer pouches); suitable film width: 240-520mm; product-contacting parts made from: AISI 304 (optionally available in AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 5kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.7m³/min; dimensions (LxWxH): 2020*1440*2130mm; weight: 750kg. Please note that our new prices are often lower than the usual prices for used equipment. Feel free to enquire and let us know your packaging requirements. Typically, we always have 30-50 different new machines available immediately from stock. In addition, for custom-built machines we offer very short delivery times from around 3 weeks. - All machines come with a full warranty. Fodpfx Asv Nngxsflepb

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine, specifically designed for the production of stand-up pouches with a rectangular base and quad-seal (4-side seal). Equipped with: touchscreen; PLC; photoelectric sensor (print mark detection) for sealing/cutting position; pneumatic sealing unit for end sealing; servo motor for film draw-off; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: max. machine cycle speed idle: 45 cycles/minute; bag size: length (180-400mm), front width: (70-220)mm, side width: (45-120)mm, (double film draw-off for longer bags possible); suitable film width: 270-620mm; product-contact parts made of: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 5.8kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.3m³/min; dimensions (LxWxH): 2330*1520*2025mm; weight: 880kg. Please note that our new prices are frequently below typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. – We generally have 30–50 different new machines immediately available from stock. For customer-specific machine builds, we offer very short lead times starting from approx. 3 weeks. – All machines are delivered with a full warranty. Fsdpfjv Nng Ejx Aflepb

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine specifically designed for the cosmetics industry for the production of round sachets and four-side sealed twin-chamber sachets. Completely round-edge sealed sachets are produced, two per cycle. Changing the sachet type requires time-consuming conversion and technical experience. Included is a dosing pump for creams, fluids, etc., which is selected according to customer-specific product requirements and determines the respective specifications. PLC and LCD touchscreen by Siemens, automatic program setup, print mark sensor, SS304 stainless steel version including hot stamping device (for production date, etc.). - Specifications: Sachet sizes: custom-made; maximum film roll width: 320mm; suitable for composite and single-layer aluminum, PE, BOPP and PP films, as well as paper; machine cycle rate in idle: 40 cycles/min (equals 80 round sachets or 40 twin-chamber sachets); 220V/2.5kW; 6bar, 0.3m³/min. Please note that our new prices are often below common used equipment prices. Please feel free to contact us and tell us about your packaging application. Normally, we always have 30-50 different new machines immediately available from stock. For machines manufactured to customer specifications, we offer very short delivery times starting from about 3 weeks. All machines are available with full warranty. Fpsdpfx Afsv Nmyqelob

Leto izdelave: 2025, Stanje: novo, Vertical filling machine for packaging low-viscosity products in flat pouches. Includes liquid dosing unit. Fodpfx Afsv Nmzbslspb - Specifications: max. machine cycle rate (idle): 70 cycles/minute; suitable for volumes from 50–500 ml; infinitely adjustable pouch length; accuracy: depending on product; max. film width: 30–100 mm; pouch size: max. L80–150 × W30–100 mm; no compressed air required; 220 V, 1.75 kW; stainless steel version (housing: SS201, product contact parts: SS304); machine dimensions: L1120 × W900 × H1950 mm; weight: 480 kg; suitable for laminated composite films such as BOPP/PE films, etc. The machine/system is also available in other versions for various packaging formats and packaging speeds. Please note that our new equipment prices are often below typical used equipment prices. Just send us your enquiry and let us know your packaging requirements. – We usually have 30–50 different new machines immediately available from stock. For custom-built machines, we offer very short delivery times from approx. 3 weeks. – All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical filling machine for packaging low-viscosity products in flat pouches. Includes liquid dosing unit. Specifications: max. machine cycle rate (idle): 60 cycles/minute; suitable for volumes of 100-1000ml; infinitely adjustable pouch length; accuracy: depending on the product; max. film width: 50-200mm; pouch size: max. L50-250xW50-200mm; no compressed air required; 220V, 1.95kW; stainless steel version (housing: SS201, parts in contact with product: SS304); machine dimensions: L1120xW920xH2050mm; weight: 500kg; suitable for laminated composite films such as BOPP/PE films, etc. Fpodpfsv Nmzhjx Afljb Please note that our new prices are often lower than the usual prices for used machines. Feel free to inquire and let us know your packaging requirements. - We typically have 30-50 different new machines available from stock for immediate delivery. For custom-made machines, we also offer very short lead times starting from around 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical production and filling system for packaging liquids in Doypack pouches (stand-up pouches). Includes liquid dosing unit (suitable for high-viscosity liquids). Pneumatic drive system, computer-controlled, easy to operate and adjust. Suitable for a wide range of films: PE/PA/PET, PE/PA, PE/PET, PE/BOPP, PE/AL/PET, etc. – Specifications: Filling volume: 100-550ml; Pouch size: L(120-180)xW(100-150)mm; Max. idle machine cycle rate: 25 cycles/min; Accuracy: +/- 1.5%; Power: 220V, 1.7kW; Compressed air: 0.4m³, 6bar; Machine dimensions: L1450xW930xH2370mm, weight: 330kg. The machine/system is also available in other versions for different packaging sizes and speeds. Fpedpfx Aev Nmz Isflob Please note that our new prices are often lower than typical used prices. Feel free to enquire and let us know your packaging requirements. – We usually have 30–50 different new machines available from stock at all times. For machines made to customer specifications, we offer very short delivery times starting from approx. 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic vertical system: automatic weighing, automatic bag feeding, bag opening, filling, and discharge. Transfer to the automatic sewing machine, where the bag is stitched shut. Completely unmanned packaging process. Easy operation thanks to touchscreen, rapid format changes. - Specifications: Measuring range: 10–50kg; Packaging material: woven hard plastic bags; max. machine cycle rate (idle): 12 cycles/minute; compressed air: 6 bar, 0.6m³; machine weight: 1,600kg; power supply: 5kW, 380V. Fpsdpfx Aev Nm Eaefljb Please note that our new equipment pricing is often below the typical used equipment market prices. Feel free to contact us and let us know your packaging requirements. – 30–50 different new machines are usually available ex stock for immediate delivery. For custom-manufactured machines, we offer very short delivery times starting at approximately 3 weeks. – All machines come with a full warranty.