Stroji za vrečke s tesnilnim robom nakup rabljenega (52)

Stanje: rabljeno, Leto izdelave: 2015, Tehnične specifikacije obdelave: Maksimalna širina obdelave: 610 mm Minimalna širina obdelave: 210 mm Dcsdpfx Ajzqt Dnsdijk Maksimalna dolžina vlečenja brez premika: 610 mm ali 410 mm, odvisno od konfiguracije Minimalna dolžina vlečenja brez premika: 50 mm Maksimalna dolžina vlečenja s premikom: 1.220 mm ali 820 mm, odvisno od konfiguracije Minimalna dolžina vlečenja s premikom: 100 mm Maksimalna frekvenca ciklov: 210 ciklov/min Maksimalna hitrost linije: 50 m/min Odvijalnik: Maksimalni premer tuljave: Ø1.000 mm Maksimalna teža tuljave: 700 kg Širina materiala pri odvijalniku s širino 48 palcev: 410–1.220 mm Širina materiala pri odvijalniku s širino 60 palcev: 410–1.520 mm Materiali, ki jih je mogoče obdelovati: Poliestrski laminati: od 40 μm BOPP laminati: od 40 μm CPP laminati: od 40 μm Koekstrudirani filmi na osnovi najlona: od 50 μm Koekstrudirani filmi na osnovi EVOH: od 50 μm Koekstrudirani filmi na osnovi LD/LLD: od 50 μm BOPP film: od 30 μm Aluminijaste folijske strukture Premazan papir Tyvek Maksimalna debelina filma, ki ga je mogoče zatesniti: 150 μm Vrste vrečk: • Vrečke TSP • Vrečke, ki stojijo • Vrečke s podpornim filmom Električni podatki: Napajanje: izmenični tok (AC), 3-fazni Razpoložljiva napetost: 20 / 240 / 380 / 415 / 480 V ±6% Frekvenca: 50/60 Hz Napajanje, specifično za stroj: 380 V, 50 Hz, 3-fazni Električna obremenitev stroja: 35 kVA Pnevmatske zahteve: Poraba zraka: 1.000 L/min pri NTP Zahteva za zrak pri nameščeni konfiguraciji: 3.000 L/min Minimalni delovni tlak: 6 kg/cm² Dovodni zrak mora biti brez vlage in prahu Hladilna voda: Poraba vode: 20 L/min Zahtevana temperatura vode: 15–17 °C Standardne funkcije stroja: • Servo-poganjeno pozicioniranje filma • Nadzor na osnovi mikroprocesorja • Operaterska konzola za nastavitev procesnih parametrov • Servo-poganjane enote za uravnavanje napetosti filma s povratno informacijo • Mehanizem za vlečenje filma s pomočjo dovoda začetka filma • Servo-poganjani sistem za nihajno zatesnjevanje • Servo-poganjane zatesnjevalne palice • Postopno zatesnjevanje in hitro hlajenje območja zatesnjevanja • Tri-stopenjsko zatesnjevanje dna, sledi ga hlajenje • Nastavljive drsne zatesnjevalne postaje • PID-krmilniki temperature z avtomatsko nastavitev • Skenirnik kontrolnih znakov za natančno umestitev • Škarjna postaja z giljotinskim sistemom in fino servo-nastavitvijo • Postaja za obrezovanje z odstranjevanjem odrezkov • Pomnilnik receptov za pogosto uporabljena opravila • Nastavljiva temperatura zatesnjevanja, tlak in čas • Avtomatski sistem za zlaganje

Stanje: rabljeno, Leto izdelave: 2022, VRSTE IZDELKOV: • Štiristranske vrečke za zapiranje • Vrečke s štirimi tesnili (quad seal) • Vrečke s stranskim tesnilom • Vrečke z prečno zadrgo • Vrečke z gubo • Vrečke z luknjo na dnu za obešanje • Mikroperforirane vrečke • Vrečke z luknjo za ročaj • Vrečke z zaobljenimi vogali MATERIALI: • LDPE • CPP • MCPP • AL • Najlon • PP • Laminirane folije GLAVNE TEHNIČNE INFORMACIJE: Debelina materiala: 60–250 μm Največja širina folije: 1300 mm Največji premer role: 800 mm Premer jedra: 3” in 6” Največja širina vrečke (quad seal): 400 mm Največja dolžina vrečke: 1000 mm Natančnost fotocelice: ±1 mm Hitrost stroja: 15–65 kos/min Hitrost materiala: 40 m/min Glavna napetost: 400V, 50Hz, 3 faze Vgrajena moč: 100 kW Teža stroja: pribl. 18.000 kg Dimenzije stroja: 33.500 × 4.200 × 1.800 mm OBSEG VELIKOSTI VREČK: Širina (quad seal/stransko varjene): 180–400 mm Globina gube: maks. 80 mm Minimalna globina gube: 30 mm Dolžina vrečke: 360–1000 mm SECTION ZA ODSUKAVANJE: • Odsukavanje z zračnim gredjo • Magnetna prah zavora • Napenjalnik z nihalnim valjem • S servo-motorjem gnani odvijalki sistem PERFORACIJSKI SISTEM: • Enota za mikroperforacijo • Perforacija z valjem • Dodatne perforacijske luknje • Enak tip kot trenutna konfiguracija stroja SISTEM ZA ZLAGANJE: • Kolesni sistem za zgibanje štiristranskih vrečk / quad vrečk SISTEM ZAPIRANJA IN HLAJENJA: Mehanski sistem za stiskanje in varjenje: Quad seal vzdolžno varjenje: 2 skupini, 1010 mm Quad seal vzdolžno hlajenje: 2 skupini, 1010 mm Prečna varilna postaja: 6 kompletov Št. 1: K-zvar Št. 2: Polnjenje gube in varjenje Št. 3: Prečni zvar, 740 mm dolžina / 60 mm širina Št. 4: Prečni zvar, 740 mm dolžina / 60 mm širina Št. 5: Prečni zvar, 740 mm dolžina / 60 mm širina Št. 6: Prečno hlajenje, 740 mm dolžina / 60 mm širina Dodatni 5 mm varilni sekciji, zgoraj in spodaj SISTEM ZA IZSEKANJE: • Zarezni izsekač za trganje • 3-luknjasti izsekač za ročaj • Izsekač za ročaje: 20 × 80 mm, 3 kompleti • Velikosti lukenj: • 3 luknje Ø20 mm • 20 × 80 mm • 24 × 77 mm • Izsekač za zaobljene vogale: 2 kompleta • Podpore za izsekač: 3 kompleti Dcsdpfxszf Nk Tj Adiek • Izsekač za luknjo na dnu: • 12 mm, 8 kosov • 16 mm, 8 kosov • Sistem za izsesavanje odpadnega materiala iz izsekavanja POGONSKI SISTEM: Glavni motor: 3,5 kW Servo vlečni valj zadaj: 3,5 kW Servo vlečni valj spredaj: 3,5 kW Servo vlečni valj v sredini: 3,5 kW Vzdolžno neodvisno varjenje, servo: 5 kW × 2 Servo motor za odvijanje: 1,5 kW × 1 / 3,5 kW × 1 Servo za napetost: 3,5 kW × 1 Servo za leteči nož: 1,5 kW × 1 Vlečni pogon za manipulator: 0,75 kW × 1 Pogon za števec končnih izdelkov: 0,75 kW × 1 KRMILNI SISTEM: • PLC krmiljenje • 10'' zaslon na dotik • Primerno za tiskane in netiskane vrečke • 16 območij za kontrolo temperature • Posamičen prikaz temperature • Toleranca temperature: ±2°C • Visokoobčutljiv fotocelični senzor • Nastavljiv položaj fotocelice SISTEM ZA ZLAGANJE: • Enostavna zlagalna miza • Sistem za odstranjevanje statične elektrike • Avtomatska zaustavitev ob zaustavitvi stroja • Alarm pri številu izhodnih vrečk: 25–100 vrečk • Pasovni nadzor s koračnim motorjem • Širina pasu: 60 mm • Nastavljiva dolžina serije in pasu VARNOSTNI SISTEM: • Varovalna svetlobna zavesa • Izredna vlečna vrv • Gumb za izklop na vsakih 2 m • Individualni izredni nadzor DODANA OPREMA: • ZIPPAK prečna zadrga • Odvijalec in navijalec za prečno zadrgo • Zmožnost Innolock / Velcro zadrge • Orodje za 3 velikosti zadrg: 180–220 mm, 230–300 mm, 310 mm • Mikroperforac

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Na voljo je popolnoma avtomatski vertikalni stroj za izdelavo vrečk iz folije Hassia. Embalažni materiali: laminati/papirne folije/monofilmi, maks. širina vrečke: 600 mm, maks. dolžina vrečke: 1100 mm, maks. širina folije: 1240 mm, maks. premer role folije: 600 mm, cikel zmogljivosti (neprekinjeno delovanje): 40 ciklov/min, temperatura toplotnega tesnjenja: 92°C. Ogled na lokaciji je možen. Dodpfoxa Elcex Adijck

Leto izdelave: 1988, stanje: dober (rabljeno), Emmersealmachine Fabrikant: Soft Electronic Systems Type: Halfautomatische emmersealmachine Model: PMS 2 GH Capaciteit: Tot 300 emmers per uur Frame: Roestvrij staal Geschikt voor: Emmers tot Ø = 300 mm Dcjdpfsigyp Hjx Adijk Afmetingen: L x B x H = 1.000 x 900 x 1.000 mm Gewicht: 150 kg Stroomvoorziening: 380 Volt – 50 Hz – 1,5 kW Perslucht: > 5,5 bar Kenmerken: - Handmatig positioneren van de emmer - Automatisch sealen (instelbare tijd) - Automatisch doorschuiven naar snij-inrichting - Automatische aandrijving en roterend mes - Handmatig oprollen van de folie - Handmatig verwijderen van de emmer

Stanje: nepreverjeno (rabljeno), Fabrikant: Waldner Type: 16x2 (32) stations roterende plaat vul-/verpakkingsmachine Model: Dosomat 18 Frame: roestvrij staal / staal Afmetingen: L x B x H = 4.050 x 2.000 x 2.100 mm Draairichting: rechtsom Capaciteit: 105 x 80 mm L x B x 25/35/55 mm H kunststof verpakkingen Stroomvoorziening: 380 Volt – 50 Hz – 8,55 kW Luchtdruk: > 5 bar Opmerking: technisch in goede staat Dodpsfz Dvkjfx Adisck elektrisch in goede staat wij adviseren het pneumatische deel van de machine te vernieuwen

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Sealing of Bags: - Flat pouches. - Doypack pouches (stand-up pouches). Integration of Zippers: - Capability to seal all types of zipper closures. Advanced Finishing: - Punching of holes, handles, and easy-open features. - Rounded corners for aesthetic and safety purposes. Branson Ultrasonic Technology: - Ultrasonic sealing of zippers ensures precision and durability. Additional Equipment: - Built-in screw compressor (10 bar). - Chiller for the cooling station, ensuring efficient cooling of bottom and zipper seals. Dcodpfx Adsvdptcsiek Technology and Modular Design: - The modular machine design allows adaptation to various film types, including laminated and co-extruded films, while maintaining high precision and process repeatability. - Servo technology provides excellent control of tension and sealing time, resulting in outstanding product quality and consistency. Pouch Types Produced with the Vegaplus Pouch System: - Three-side sealed bags. - Zipper bags. - Doypack pouches (stand-up pouches) made from a single film or with a separately inserted bottom gusset. - Retort pouches with rounded corners (without notch). - Side-gusset pouches with zippers.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, VFFS machine for the production of doypacks with zipper, including 4-head linear weigher. Dcodev Hpfkepfx Adisk Equipped with: touchscreen, PLC, photo sensor (registration mark detection) for sealing/cutting position, pneumatic sealing unit for end sealing, servo motor for film draw-off, thermal transfer printer for batch number, date, and best-before date. VFFS Machine Specifications: Max. machine cycle rate (idle): 35 cycles/min; 2 form sets for pouch sizes: approx. L 210mm & 300mm, approx. W (70-300)mm; Suitable film width: 280-720mm; Product-contact parts made of AISI304. Weighing Unit Specifications: 4 weighing heads; Weighing range: 50-2000g; Weigh hopper volume: 3L; Product-contact parts made of AISI304. New and with warranty. Available immediately from Reinbek.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for producing pillow bags with back seam, gusseted stand-up pouches (gusset tool required), OR pyramid-shaped bags (special sealing unit required). Twin version for increased output, featuring 2 complete production lines in one machine. Equipped with: touchscreen; PLC; photo sensor (print mark detection) for seal/cut positioning; servo-driven sealing unit for end sealing; servo motor for film draw-off; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: max. machine cycle rate in idle: 90*2=180 cycles/minute; bag size: L(40-300)xW(60-180)mm (double film draw-off possible for longer bags); suitable film width: 140-380mm; product-contact parts made of: AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 3.9kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.4m³/min; dimensions (LxWxH): 2270*1560*1880mm; weight: 900kg. Dcsdpfx Adsv Nnfzsiek Please note that our new machine prices are often below typical used machine prices. Feel free to contact us and let us know your packaging requirements. - We typically have 30-50 different new machines immediately available from stock. For custom-made machines, we also offer very short delivery times starting from around 3 weeks. - All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic packaging machine for filling and packing tea into single-chamber tea bags, followed by insertion into three-side sealed bags. Includes volumetric dosing unit and labeling system for attaching thread with label. Labeling system: In the standard version, the label is folded and glued together with the inserted thread. Optionally, a heat-sealing module is available for this production step. Thread application method: Heat-sealing the thread into the edge of the tea bag. Grouped bag output either individually, counted, or into a pre-set box (optional). Dcjdpov Nlh Hsfx Adisk - Specifications: max. idle machine cycle rate: 115 cycles/min; dosing volume: max. 6cm³; tea bag dimensions (LxW): 62.5x50mm; tea bag material roll width: 125mm; suitable tea bag material: 16.5-21g/m², one-side heat-sealable; three-side seal bag dimensions (LxW): 80x70mm; three-side seal bag material: heat-sealable mono-films or laminated composite film; label (LxW): 28x24mm; thread length: 210mm; power supply: 220/380V; power consumption: 2.5kW; machine dimensions (LxWxH): 1688x1330x2205mm; weight: 1210kg. Please note that our new machine prices are often below standard used equipment prices. Feel free to inquire and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times from approx. 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic pyramid tea bag forming and filling machine including volumetric dosing unit. Also suitable for flat tea bags. Bag forming method: ultrasonic sealing. Label and string must already be integrated into the film. Specifications: Max. idle machine cycle rate: 50 cycles per minute; dosing volume: 5–40 cm³; tea bag capacity: 1.5–10g; tea bag dimensions: pyramid bag: 50 / 60 / 70 / 80mm; flat bag LxW: 50x50 / 60×58 / 70×65 / 80×72mm; film roll width for bag material: 120 / 140 / 160 / 180mm; suitable bag materials: P.E.T / non-woven fabric / nylon mesh; power supply: 220V, 50/60Hz; power consumption: 1.2kW; required compressed air: 0.6 MPa; compressed air consumption: 100l/min; machine dimensions LxWxH: 924x1130x2100mm; weight: 420kg. Dcodsv Nliwepfx Adisk Please note that our new machine prices are often below average used prices. Feel free to enquire and tell us about your packaging requirements. – We usually have 30–50 different new machines available immediately ex stock. For customer-specific machines, we offer very short delivery times of approx. 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Complete vertical packaging system for dosing coffee beans AND ground coffee and for packing into stand-up coffee pouches with aroma valve. The system is equipped with two separate dosing units (auger filler for powder, volumetric dosing unit for granules) and also includes a Z-bucket elevator, screw conveyor, outfeed conveyor belt, and an AMTEC PRO P60L as the VFFS packaging machine. Further included are a hot stamping printer for date and batch number (optional: thermal transfer printer on request), anti-static module, stand-up pouch module (gusset device), and flat-bottom module (the bottom seam is formed tightly to the base, depending on the film material). VFFS Specifications: Reliable film pulling via vacuum; PLC from MITSUBISHI/SIEMENS, WEINVIEW touchscreen; mark sensor; quick-change forming unit; pneumatic sealing unit; film transport by servomotor; bag size: L(100-300)xW(80-240)mm; max. idle machine cycle rate: 60 cycles/minute; stainless steel; 220V/4.0kW; 6bar, 0.36m³/min; dimensions and weight: L1550xW1160xH1480mm, 600/700kg. Volumetric dosing unit specifications: 4 cups; stainless steel; dosing range: 80-2,000ml; max. idle machine cycle rate: 60 cycles/minute. Dedpfxsv Nmh Is Adijck Auger filler specifications: Stainless steel; servomotor; dosing range: 10-2000g; filling hopper: 50 liters; accuracy: 0.5-2%; max. idle machine cycle rate: 60 cycles/minute; hopper with side opening, including dust collector. Please note that our new machine prices are often below the standard used prices. Feel free to ask for a quote and let us know your packaging requirements. We typically carry 30-50 different new machines in stock and ready for immediate delivery. For custom-manufactured machines, we offer very short lead times starting from approximately 3 weeks. All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Packaging system for fully automatic dosing, filling, and packaging of tea into pyramid (tetrahedral) tea bags. Dosing or weighing is performed by an 8-head linear weigher, which is already included in the price. The pyramid tea bag packaging machine utilizes ultrasonic sealing technology to produce either flat standard tea bags or pyramid tea bags. Finally, the (flat or pyramid) tea bags are packed into the outer bag, which can be either a 3-side seal pouch or a pouch with a back seam. Specifications: Maximum machine cycle rate (idle): 50 cycles/minute; Number of linear weigher heads: 8; Weighing range: 1~10g; Accuracy: ±0.1g/bag; Tea bag dimensions: pyramid tea bag per side: 50–80 mm, flat tea bag: W(60–80)xL(40–80) mm; Suitable film types for tea bags: nylon, non-woven fabric, PET, PLA; Film width: 140 mm, 160 mm, 180 mm; Outer bag dimensions: W(80–120)xL(90–120) mm; Power: 220V, 1.5kW; Product-contacted parts made of stainless steel 304; Compressed air: 6 bar; Machine dimensions: depending on final layout. Dedpfsv Nmiljx Adiock Please note that our new machine prices are often below standard used equipment prices. Feel free to send us your packaging requirements for a quote. Typically, 30–50 different new machines are available from stock for immediate delivery. For custom-built solutions, we offer very short delivery times starting from approximately 3 weeks. All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical filling machine for packaging low-viscosity products into flat sachets. Includes liquid dosing unit. - Specifications: max. machine cycle rate (idle): 200 cycles/minute; suitable for volumes of 5-20ml; infinitely adjustable sachet length; accuracy: depending on product; max. film width: 30-80mm; sachet size: max. L50-110 x W30-80mm; no compressed air required; power supply: 220V, 1.7kW; stainless steel version (housing: SS201, contact parts: SS304); machine dimensions: L790 x W600 x H1780mm; weight: 350kg; suitable for laminated composite films such as BOPP/PE films, etc. The machine/system is also available in further versions for various packaging sizes and speeds. Please note that our new prices are often lower than the usual prices for used equipment. Feel free to contact us and let us know your packaging requirements. - We normally have 30-50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. - All machines are supplied with a full warranty. Dcodpfx Ajv Nmywedisk

Stanje: novo, Leto izdelave: 2025, Vertical filling machine for packaging low-viscosity products into flat pouches, including a liquid dosing unit. Suitable for volumes from 10–50 ml, with continuously adjustable pouch length. - Specifications: max. machine cycle rate in idle: 200 cycles/minute; accuracy: depending on product; max. film width: 30–80 mm; pouch size: max. L50–110 x W30–80 mm; no compressed air required; power supply: 220V, 1.7 kW; stainless steel version (housing: SS201, product contact parts: SS304); machine dimensions: L790 x W600 x H1780 mm; weight: 400 kg; suitable for laminated composite films such as BOPP/PE films, etc. Djdpfxev Nmy Do Adijck The machine/system is also available in other versions for different packaging sizes and speeds. Please note that our new equipment prices are often below typical used market prices. Feel free to inquire and tell us your packaging requirements. – We generally have 30–50 different new machines available for immediate delivery from stock. For custom-manufactured machines, we also offer very short lead times starting from approx. 3 weeks. – All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic packaging machine for packing flat tea bags such as single-chamber and double-chamber bags into 3-side sealed pouches. Discharge unit for grouped tea bags. PLC controlled, operation via touch monitor. - Specifications: max. machine output (idle): 120 cycles per minute; Suitable tea bag volume: max. 10cm³; Dimensions 3-side sealed pouch (LxW): 70x80mm; Material for 3-side sealed pouch: heat-sealable mono films or laminated composite film; Power supply: 220V; Machine dimensions (LxWxH): 1680x1285x1230mm; Weight: 500kg. Dcodpfx Aov Nlhmedijk Please note that our new prices are often lower than common used machine prices. Feel free to inquire and tell us about your packaging requirements. – We typically have 30-50 different new machines in stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine including dosing unit(s) with 8 production lines for the manufacture of "stick packs" with a central vertical fin seal (optionally: 3- or 4-side seal – subject to surcharge) for packing granulated products (e.g., sugar, salt, etc.). PLC and color touchscreen from OMRON, self-diagnostics. Pneumatic components from AIRTAC, PID temperature controller from OMRON, electronic components by SCHNEIDER and OMRON. Film feed, AB frequency inverter control, stainless steel version (SS304), oscillating hopper filling unit for granulates. – Specifications: Max. machine output in idle: 8x60 cycles/minute; Accuracy: +/-10%, suitable for all BOPP/PE and laminated films; Bag sizes: L(50-350)xW(10-50)mm; Power supply: 220V, 5.5kW; Compressed air: 1.5m³/min, 6 bar; Machine dimensions: L1700xW1400xH1900mm; Weight: 650kg. The machine/system is also available in various versions for different packaging sizes and packaging speeds. Dcodpfjv Nmdijx Adijk Please note that our new prices are often lower than the usual second-hand prices. Feel free to contact us and let us know your packaging requirements. Usually, 30-50 different new machines are immediately available from stock. For custom-built machines, we also offer very short lead times starting from around 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine including dosing unit(s) with 4 production lines for manufacturing "stick packs" with a center back seal (alternatively: 3- or 4-side sealing available at extra cost) for packaging powder products (pepper, milk powder, etc.). Features PLC and color touchscreen by OMRON, self-diagnostics. Pneumatic components from AIRTAC, temperature PID control by OMRON, electronic components by SCHNEIDER and OMRON. Film feeding system, AB converter control, stainless steel construction (SS304), auger dosing unit with servo motor, and hopper. - Specifications: Accuracy: +/- 0.3–1%; maximum machine cycle rate (idle): 4x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50–350)xW(10–100)mm; power: 220V, 3.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1500xW1300xH1900mm; weight: 450kg. Dcodpfxov Nmftj Adisk This machine/system is also available in other configurations for various packaging sizes and packaging speeds. Please note that our new equipment prices are often lower than typical used machine prices. Feel free to inquire and tell us about your specific packaging requirements. – Normally, 30–50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, 4-lane VFFS for packaging of granulates, powders, or liquids in pillow bags with back seal, optionally also for 3- and 4-side seal bags (at additional cost). Servo motors for rapid film feeding. Suitable for all sealable mono- and composite films as well as laminated films. Additional features: touchscreen operation monitor, automatic program setup, mark sensor, date/batch printer. – Specifications: maximum machine cycle rate in idle mode: 4x60 cycles/minute (equals up to 240 bags/minute); bag sizes: L(50-250)xW(55-102)mm; film width: 520-900mm; power supply: 380V, 6.3kW; compressed air: 1.4m³/min, 6bar; machine dimensions: L1800xW1600xH1760mm. Dcodpfx Aov Nmx Tjdijk Please note that our new machine prices are often lower than usual used machine prices. Feel free to inquire and let us know your packaging application. – We generally have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from approx. 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for forming and sealing 3- or 4-side seal pouches. Equipped with: touchscreen; PLC; photo sensor (print mark detection) for seal/cut position; pneumatic sealing unit for final sealing; servo motor for film feeding; thermal transfer printer for batch number, date, and expiry date. - VFFS machine specifications: max. machine cycle rate (idle): 50 cycles/minute; bag size: L(40-330)xW(70-210)mm (double film feed possible for longer bags); suitable film width: 140-420mm; product-contact parts made of: AISI 304 (optional AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 3.5kW; required compressed air: 0.2-0.8MPa; air consumption: 0.6m³/min; dimensions (LxWxH): 1208x1030x1620mm; weight: 450kg. Dodpfxjv Nnf Ue Adisck Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us with details of your packaging application. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Automatic packaging machine for filling and packing tea into single-chamber tea bags with subsequent packaging into 3-side seal sachets. Includes volumetric dosing system and labeling system for attaching the string with label. Labeling system: In the standard version, the label is folded and glued together with the integrated string. Optionally, a heat-sealing module is available for this production step. Method for attaching the string to the tea bag: By heat-sealing onto the edge of the tea bag. Grouped bag discharge either individually, counted, or directly into a pre-erected box (optional). - Specifications: max. machine cycle rate (idle): 115 cycles per minute; dosing volume: max. 10cm³; tea bag dimensions (LxW): 65x62.5mm; roll width for tea bag material: 125mm; suitable tea bag material: 16.5–20g/m², one-side heat-sealable; 3-side seal sachet dimensions (LxW): 82x75mm; 3-side seal sachet material: heat-sealable mono films or laminated composite film; label (LxW): 28x24mm; string length: 220mm; power supply: 220/380V; power consumption: 2.5kW; machine dimensions (LxWxH): 1688x1330x2205mm; weight: 1210kg. Dcsdpfx Aev Nlh Tsdisk Please note that our new prices are often below typical used equipment prices. Simply contact us and tell us your packaging requirements. – We usually have 30–50 different new machines immediately available from stock. For machines built to customer specifications, we offer very short lead times from approx. 3 weeks. – All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine including dosing unit(s) with 4 production lines for manufacturing "stick packs" with a standard center back seal (alternatively: 3- or 4-side sealing available at extra cost) for the packaging of granulates (such as sugar, salt, etc.). PLC and color touchscreen by OMRON, self-diagnosis function. Pneumatic components from AIRTAC, temperature PID control by OMRON, electronic components by SCHNEIDER and OMRON. Film feed drive, AB converter control, stainless steel version (SS304), vibrating cup filling unit for granules. Dcedpfx Adov Nmc Ssisk - Specifications: Max. machine cycle rate (idle): 4x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-100)mm; power supply: 220V, 3.5kW; compressed air: 1.5m³/min, 6 bar; machine dimensions: L1500xW1300xH1900mm; weight: 450kg. The machine/system is also available in other versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the usual used equipment prices. Please feel free to contact us and let us know your packaging requirements. Generally, 30-50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine including dosing unit(s) with 10 production lines for the manufacture of stick packs with a central back seal (alternatively: 3- or 4-side sealed – at extra charge) for packaging standard liquids (water, vinegar, etc.). PLC and color touchscreen from OMRON, self-diagnosis. Pneumatic components by AIRTAC, temperature PID by OMRON, electronic components by SCHNEIDER and OMRON. Film transport, AB converter control, stainless steel version (SS304), piston pump with 60-liter hopper. – Specifications: max. machine idle cycle rate: 10x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; pouch sizes: L(50–350)xW(10–38)mm; power: 220V, 6.5kW; compressed air: 1.5m³/min, 6 bar; machine dimensions: L1800xW1500xH1900mm; weight: 750kg. The machine/system is also available in other versions for various packaging sizes and packaging speeds. Dsdsv Nmfgspfx Adijck Please note that our new prices are often below the usual prices for used equipment. Simply contact us and let us know your packaging requirements. – We generally always have 30–50 different new machines available from stock. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines come with full warranty.

Stanje: novo, Leto izdelave: 2025, Sample system with 10 automatic counting discs and a standard pouch packaging machine. Suitable for counting small parts such as screws, nuts, candies, nuts, etc., and for packaging programmable assortments into flat pouches or 3- or 4-side sealed bags. The number and size of the counting discs in the system can be customized (this sample system includes 10 counting discs!). - Specifications: Machine dimensions and total price depend on the required packing speed, the products to be packed, and the pouch size. Available in stainless steel and painted steel. - The price applies only to the sample system. Dsdpfov Nmhnox Adiock Please note that our new prices are often below the usual used equipment prices. Feel free to inquire and tell us about your packaging requirements. - We typically have 30-50 different new machines available from stock at all times. For custom-built machines, we offer very short delivery times starting at approximately 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Complete vertical packaging system for dosing coffee beans AND ground coffee, and packaging into coffee stand-up pouches with aroma valve. The system is equipped with two separate dosing units (auger doser for powder, volumetric doser for granules), and includes a Z-type conveyor, screw conveyor, discharge conveyor belt, and an AMTEC PRO P60XL as the VFFS packaging machine. Features also include a hot stamp printer for date and batch number (optional: thermal transfer printer on request), an anti-static module, stand-up pouch module (gusset device), and flat-bottom module (the bottom seam is positioned tightly to the base, depending on film material). - VFFS Specifications: Reliable film transport by vacuum; PLC by MITSUBISHI/SIEMENS, WEINVIEW touchscreen; print mark sensor; quick-change forming unit; pneumatic sealing unit; servo motor for film transport; bag size: L(100-380)xW(110-300)mm; max. machine cycle rate (no load): 60 cycles/minute; stainless steel; 220V/4.0kW; 6 bar, 0.4m³/min; Dimensions and weight: L1600xW1260xH1680mm, 600/700kg. - Volumetric Dosing Unit Specifications: 4 cups; stainless steel; dosing range: 80-2,000ml; max. machine cycle rate (no load): 60 cycles/minute. Dcodjv Nmh Uepfx Adisk - Auger Doser Specifications: Stainless steel; servo motor; dosing range: 10-2,000g; fill hopper: 50 liters; accuracy: 0.5-2%; max. machine cycle rate (no load): 60 cycles/minute; hopper with side-opening, including dust collector. Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us with your packaging requirements. We generally have 30-50 different new machines available from stock for immediate delivery. Additionally, we offer very short lead times from approximately 3 weeks for machines built to customer specifications. All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal machine for the production of pillow bags with back seam and gusseted stand-up pouches (gusset former required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photoelectric sensor (print mark detection) for sealing/cutting position; servo-driven end sealing unit; servo motor for film draw-off; ribbon coder for batch number, date, and expiry date (best before date). - VFFS machine specifications: max. machine cycle rate (idle): 90 cycles/minute; bag size: L(40-200)xW(30-150)mm; suitable film width: 80-320mm; product-contact parts made of AISI 304 (optionally, AISI 316 at additional cost); power supply: 220V, 50/60Hz; power consumption: 4kW; required compressed air: 0.7MPa; compressed air consumption: 0.1-0.3m³/min; weight: 320kg. Please note that our new prices are often below typical used equipment prices. Feel free to send us an enquiry and tell us about your packaging requirement. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are supplied with full warranty. Dcodpfx Adov Nncaoiek