Traub Tnd 200 nakup rabljenega (91)

Stanje: rabljeno, TECHNICAL DATA Ljdsuhaw Uopfx Afmjrn - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turrets: 2 UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 [mm] - Y travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 - X/Z travel: 35/79.5 [mm] FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] - X/Z travel: 415/138.5 [mm] SUB OPERATIONS - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 Lrodeuhawzspfx Afmen - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis increment: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT DEVICE - Number of positions: 4 BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: main spindle - Parts catcher - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of bushings and collets for bar feeder magazine - Set of spare parts

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° Lodpfxeuhawuj Afmjrn SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 4 SUB MACHINING - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts catcher - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Bushings: 4 - Set of sleeves and collets for bar loader - Tool presetting device

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Spindle hours: 26,709 [h] COUNTER SPINDLE - Max. bar diameter: 13 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Spindle hours: 16,854 [h] - Number of turrets: 2 Lodpfxeuhawho Afmern UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 [mm] - Z stroke: 50 [mm] - Driven tool speed: 8,000 [rpm] LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 [mm] * Y travel: -9.5 / +28 [mm] - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 16 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2,850 x 1,100 [mm] - Machine height: 1,480 [mm] - Machine weight: 2,000 [kg] EQUIPMENT - Control: Traub TX 8i - Driven guide bushing - Parts removal device - Parts conveyor belt - Chip conveyor: KNOLL 160 S-1 - Coolant tank: 500 [l] * with paper filter - Bar loader: FMB Minimag 18 / 3200 C - Oil mist extractor: UAS SMOG HOG SH-05 - Number of fixed tool holders: 5

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions Ljdpsuhav Dsfx Afmjrn - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm Ledpouhadzefx Afmjrn - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW DIMENSIONS AND WEIGHT - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status light - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt - Number of driven tool holders: 6 - Number of static tool holders: 33 - Collet chuck: 2 HAINBUCH

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 19.295 h, moč vretenovega motorja: 10.700 W, največja hitrost vretena: 8.000 obr/min, skupna masa: 6.000 kg, skupna širina: 2.500 mm, skupna višina: 2.600 mm, Premer palice (maks.): 32 mm, potovalna razdalja osi X: 140 mm, proizvajalec krmilnikov: TRAUB, model krmilnika: TX 8i-p, največja dolžina izdelka: 4.500 mm, število osi: 7, Ta 7-osna stružnica TRAUB TNL 32 P je bila izdelana leta 2012. Ima največji premer palice 32 mm in največji pomik Z-osi 305 mm. Stroj je opremljen z dvema revolverjema z gnanimi orodji, ki ponujata po 10 oz. 9 orodnih postaj. Če iščete visokokakovostne zmogljivosti za struženje, razmislite o naši ponudbi dolge stružnice TRAUB TNL 32 P. Za več informacij nas kontaktirajte. • Število revolverskih glav: 2 • Največji pomik Z-osi: 305 mm • Navor glavnega vretena: 21/32 Nm • Resolucija C-osi glavnega vretena: 0,001° • Orodne postaje revolver 1: 10 • Postaje za gnana orodja revolver 1: 10 • Hitrost gnanih orodij v revolverju 1: 12.000 obr/min • Moč gnanih orodij revolver 1: 1,5 / 2,5 kW • Premer držala orodja revolver 1: 45 mm • Nosilec rezalnega orodja revolver 1: 16 x 16 mm • Revolver 1 pomik X-osi: 140 mm • Revolver 1 pomik Z-osi: 305 mm • Revolver 1 ločljivost H-osi: 0,001° • Revolver 1 čas med menjavo orodja: 0,3 s • Revolver 2 orodne postaje: 9 • Revolver 2: 9 postaj za gnana orodja • Revolver 2 hitrost gnanih orodij: 12.000 obr/min • Revolver 2 moč gnanega orodja: 1,5 / 2,5 kW • Revolver 2 premer držala orodja: 45 mm • Revolver 2 nosilec rezalnega orodja: 16 x 16 mm Lrodpfezcyhxex Afmon • Revolver 2 pomik X-osi: 140 mm • Revolver 2 pomik Y-osi: -25 / +40 mm • Revolver 2 pomik Z-osi: 320 mm • Revolver 2 čas med menjavo orodja: 0,3 s • Hitrost protivretena: 8.000 obr/min • Moč protivretena: 1,5 / 2,5 kW • Navor protivretena: 4,5 / 7,7 Nm • Resolucija C-osi protivretena: 0,001° • Največja dolžina vpenjanja: 250 mm • Največji premer palice (protivreteno): 32 mm • Orodne postaje za zadnjo obdelavo: 8 • Postaje za gnana orodja za zadnjo obdelavo: 3 • Hitrost gnanih orodij za zadnjo obdelavo: 12.000 obr/min • Moč gnanega orodja za zadnjo obdelavo: 1,5 / 2,5 kW • Premer držala orodja za zadnjo obdelavo: 36 mm • Hitri pomik (X / Y / Z): 20 / 20 / 20 m/min • Največja hitrost podajanja: 20.000 mm/min • Skupna priključna moč: 46 kW • Potrebna površina z vključenim podajalcem palic: 8.000 x 2.500 x 2.600 mm • Transporter za odrezke: opcijsko, ni vključen • Sistem hlajenja: da • Orodni revolver: 2 • Enota za zadnjo obdelavo: da • Vmesnik za podajalec palic: da • Podajalec palic: LNS Hydrobar Express 332 S2 / 3 m • Elektronsko ročno kolo: da • Hidravlična enota: da Poškodbe stroja: Proti vreteno je trenutno neuporabno zaradi daljšega neuporabe. Okvarjen je ali senzor, ali motor. Tehnične specifikacije: Proti vreteno: Da Gnana orodja: Da Hlajenje skozi vreteno: Da

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 19.295 h, največja hitrost vretena: 8.000 obr/min, Premer palice (maks.): 32 mm, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8i-s, število osi: 9, Ta 9-osni stroj TRAUB TNL32-9 je bil izdelan leta 2017. Opremljen je z glavno vreteno s hitrostjo 8.000 vrt/min in protivretenom s hitrostjo 6.400 vrt/min. Stroj ima dva pogonska sistema in največji premer prehoda palice 32 mm, kar omogoča vsestransko uporabo za različne stružne operacije. Če iščete visokokakovostne možnosti struženja, vam priporočamo, da razmislite o našem naprodajnem dolgoobratovalnem stroju TRAUB TNL32-9. Za več informacij nas kontaktirajte. • Glavna vreteno: motorno vreteno • Premer prehoda glavnega vretena: 32 mm • C-os glavnega vretena: Da • Premer prehoda protivretena: 30 mm • Hitrost protivretena: 6.400 vrt/min • Zgornji nosilec orodij: X-/Y-/Z-/H-os • Spodnji nosilec orodij: X-/Y-/Z-/H-os • Pozicije orodij zgornjega nosilca: 10 • Pozicije orodij spodnjega nosilca: 10 • Dvojni pogonski sistem: Da • Dolga stružna obdelava: Da • Kratka stružna obdelava: Da • Izmenični način struženja (W-T): Da • Notranji tlak hladilne tekočine: 20 / 80 / 120 bar • Sistem za hlajenje: Bürener ECO Fluid • Kapaciteta rezervoarja za hladilno tekočino: 600 l • Sistem za odsesavanje oljne meglice: Da • Pretok zraka: ca. 1.500 m³/h • Avtomatski CO₂ gasilni sistem: Da • Hidravlični prijemalec obdelovanca: Da • Izmetalec obdelovancev na protivretenu: Da • Transporter obdelovancev: Da • Sistem za nadzor orodij: Da • Omrežni vmesnik RJ45: Da • Napetost: 400 V • Frekvenca: 50 Hz • Nazivna moč: 36 kW • Priključna moč: 44 kVA • Nazivni tok: 63 A • Največje zavarovanje: 63 A • Oznaka CE: Da • Podajanje palic: FMB LSK38 / 3200 C • Razpon premera palic: 5 – 38 mm • Največja dolžina palic: 3.200 mm • Odstranjevanje ostankov: do 600 mm • Smer podajanja: desno • Položaj odlaganja materiala: spredaj • Transporter za odrezke: opcijsko, ni priložen Tehnične specifikacije Lrodpfxjzcyabs Afmon Hlajenje skozi vreteno: Da Protivreteno: Da Pogonjena orodja: Da

Stanje: dober (rabljeno), Interna št. artikla: 25088 Nosilec orodja Nosilec za navojno vrtinčenje vklj. z rezilnimi ploščicami Index / Traub Št.: 12068219 Orodje je bilo v uporabi na stroju Traub TNL18 Zelo dobro ohranjen! Lredpfx Ajxu Dcvefmen

Stanje: rabljeno, Leto izdelave: 2001, Drehdurchmesser 340 mm Drehlänge 750 mm Steuerung SYSTEM TX 8H Spindeldurchlass 80 mm Umlaufdurchmesser über Planschlitten 530 mm Umlaufdurchmesser über Bett 665 mm Drehzahlbereich - Hauptspindel 3.150 min/-1 Antriebsleistung - Hauptspindel 22 kW Anzahl der Werkzeugplätze 12 Pos. Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Es sind 2 Maschinen verfügbar. Preis pro Stück. Maschine 1: - Bilder 1-5 - Betriebsstunden ca.55.790 h Maschine 2: - Bilder 6-10 - Betriebsstunden ca.54.347 h Technische Merkmale & Zubehör: - Y Achse Lrodjxwdw Eopfx Afmon - Zubehörpaket mit starren und angetriebenen Werkzeughaltern -Späneförderer Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 1.749.535 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6060449, stružna dolžina: 305 mm, največja hitrost vretena: 8.000 obr/min, premer struženja: 32 mm, izvrtina vretena: 32 mm, skupna masa: 8.000 kg, največja hitrost vrtenja: 8.000 obr/min, vrsta vhodnega toka: trifazni, prehod palice: 32 mm, skupna dolžina: 3.671 mm, skupna višina: 2.650 mm, hitrost pomika os X: 5 m/min, hitrost podajanja osi Y: 5 m/min, hitrost podajanja os Z: 5 m/min, Premer palice (maks.): 32 mm, vrtina vpenjalnega tuleca: 32 mm, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 20 m/min, vhodna napetost: 400 V, moč: 36 kW (48,95 KM), potovalna razdalja osi X: 140 mm, pomik osi Y: 40 mm, pomik po osi Z: 305 mm, premer vpenjanja: 32 mm, proizvajalec krmilnikov: Traub System TX 8i - s V7, Oprema: dokumentacija / priročnik, Stroj je priključen na elektriko in trenutno vsakodnevno obratuje. Vse informacije so v prilogi. Stroj je na voljo v kratkem času. Potrdilo naročila z vsemi podatki o stroju in polnilnikom palic je priloženo. Nova cena: 444.857,70 € bruto. Stroj je bil od leta 2016 do 2020 prvotno demonstracijski stroj. Prosimo, upoštevajte število delovnih ur. Stroj se prodaja skupaj s polnilnikom palic FMB LSK38. Lrjdszc Hmujpfx Afmen FMB LSK38 / 3200 "C"

Stanje: dober (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Traub CNC stružnica TNA480, TX8D, letnik 1990, št. stroja >550 C-os, pogon rotirajočega orodja, 1 revolver VDI40, konjiček, transporter za ostružke, votli vpenjalni valj, 3-čeljustna glava KNCS315. Dobro stanje, pripravljena za obratovanje Geometrija stroja je bila preverjena in popravljena/nastavljena Brisalci in jermeni so bili pregledani, zamenjani, servis pri 4000h. Lodpfx Afozcdgfomsrn Slike so iz proizvodnje, stroj bo še očiščen in pregledan. Stroj je možno ogledati pod napetostjo.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 x avtomatski stružni stroj Traub A 25 Oprema: Vrtalna konjička Ljdpfezcdp Hex Afmsrn Naprava za vzdolžno struženje Podajanje z utežjo Lep, popoln stroj v tehnično brezhibnem stanju. Stroj si je mogoče ogledati pod napetostjo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 124.706 h, največja hitrost vretena: 6.300 obr/min, potovalna razdalja osi X: 370 mm, pomik po osi Z: 250 mm, moč vretenovega motorja: 10.700 W, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8i (64-bit), število osi: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced features such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking for a high-quality lathe, you should consider the TRAUB TNK 36 horizontal lathe we are offering for sale. Contact us for further details. TECHNICAL DATA • MDE interface: Yes • Tool monitoring: Yes • Rigid tapping: Yes (without compensation chuck) • Main spindle bore: 36 mm • Main spindle drive power: AC 6.7 / 10.7 kW • Upper turret stroke X/Z: 50 / 100 mm • Rear attachment X stroke: 73 mm • Rear attachment Y stroke: ±50 mm • Main spindle C-axis: Yes • Hainbuch quick-change parts: Yes • Hainbuch setup aid base body: Yes Lrsdpfx Ajza Ucxsfmen • Hainbuch manual quick-change device: Yes • Sub spindle: Motor spindle • Sub spindle C-axis: Yes • Counter pressure device: Yes • Workpiece ejector: Yes • Hainbuch Axfix chuck: Yes • Upper tool carrier: Yes • Electronic gearbox: Yes • X3 cross-axis for front unit: Yes • Front unit: 5-position • Driven tools at the front unit: Yes • Parting-off side machining station: Yes • Driven tools at parting-off station: Yes • Workpiece unloading device: Gripper • Coolant tank capacity: 230 l • Coolant pressure: 7 bar • Coolant flow rate: 50 l/min • Internal coolant supply: 30 bar • High-pressure coolant: 120 bar (front and rear machining station) • Coolant filter: Knoll VRF 150/750 vacuum rotary filter • Suitable filter materials: Aluminum, plastic, brass, steel • Wash gun: Yes • Connected load: 22 kW • Maximum bar length: 3 m • Maximum bar diameter: 36 mm • Operating voltage: 400 V, 3~, 50 Hz • Control voltage: 24 V AC • Valve voltage: 24 V DC • Clutch voltage: 24 V DC • Total installed power: 33 kW • Total rated current: 60 A OPTIONAL ADDITIONAL EQUIPMENT • FMB turbo 5-42 XT / 3200 “C” bar feeder • Bar feeder year of manufacture: 2003 • Hinged belt chip conveyor • Chip conveyor discharge height: 950 mm • Guide tubes D25, D36 • Live workpiece stop, shank 16 × 16 mm • Brankamp CMS 100 collision monitoring Technical Specification Through-spindle coolant: Yes Counter spindle: Yes Driven tools: Yes

Stanje: pripravljen za uporabo (rabljen), Traub 700 734 VEMEM/I vmesna plošča, rabljena, v dobrem stanju, 100% delujoča, dobava skladno s fotografijami. Lrjdpox Eu Tvofx Afmjn

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Lodpeu Ix N Sjfx Afmjrn Swing diameter over bed: 180 mm Turning length: 490 mm Swing diameter: 450 mm Cross travel: Z-axis travel: 168 mm Control: Traub TX8D Spindle speed: 20 - 4000 rpm Spindle bore: Ø 60 mm Operating hours / Power-on hours: 23,495 h Tool turret: 12 tools Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. (LxWxH): 3.6 x 2.5 x 2.2 m Tool holder cylindrical shank DIN 69880 (VDI 3425) Ø 40x63 Röhm power chuck Ø 200 mm hydraulic clamping Operation via double foot switch and control panel/operator console. Coolant system The Traub has an integrated chip conveyor with a discharge height of 1,100 mm (currently not functional). Accessories: various small parts 8 various machine feet without tailstock i.D.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 18 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.0 / 5.5 kW - Minimum C-axis resolution: 0.001° - Z-axis travel: 205 mm SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle drive power: 1.5 / 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turret heads: 2 UPPER TURRET - Number of positions: 8 - Number of driven positions: 8 - Driven tool speed: 12,000 rpm - Driven tool power: 1 / 2 kW Lodezbvnlspfx Afmern - Travel X/Z: 165 / 550 mm - Travel Y: -40 / +25 mm - Rapid traverse rate (X/Y/Z): 21 / 21 / 42 m/min - B-axis stroke: 100° LOWER TURRET - Number of positions: 7 - Number of driven positions: 7 - Driven tool speed: 12,000 rpm - Driven tool power: 1.5 / 2.5 kW - Travel X/Z: 120 / 250 mm - Travel Y: -20 / +40 mm - Rapid traverse rate (X/Y/Z): 21 / 21 / 50 mm/min SUBSEQUENT MACHINING - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 10,000 rpm - Driven tool power: 1 / 2 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 24 kVA WEIGHT AND DIMENSIONS - Floor space required: 3,060 x 1,480 mm - Machine height: 2,420 mm - Machine weight: 4,300 kg MACHINE HOURS - Operating hours: 14,998 h - Spindle hours: 11,177 h ACCESSORIES - Control: Traub TX 8i-s - Driven guide bushing - Parts removal - Parts conveyor belt - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar feeder: IEMCA ELITE 220 / 32 XL - Oil mist extraction: ELBARON RON/A 1500 DH - Fire extinguishing system * * NB: Functionality not guaranteed. Must be inspected by a qualified company on behalf of the buyer.

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Ledpfxswp D Nbj Afmsrn Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: DIN 69880 40 x 63 Total power requirement: 95 kW Approx. machine weight: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers extraction system, coolant unit with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Stanje: dober (rabljeno), Leto izdelave: 1996, CNC Turning Center TRAUB Type: TNC65 DG Year of manufacture: 1996 Control: TRAUB TX8F Lrodpfx Aeu Eug Ijfmjn Includes extensive accessories.

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Lathe TRAUB TNX 65/42 Year of Manufacture: 2009 Control System: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V Lodpfxsyw H Szj Afmjrn - Total power consumption: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle installed since 04/26 ACCESSORIES - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts ejector - Parts belt conveyor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 87.094 h, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 140 mm, pomik po osi Z: 450 mm, moč vretenovega motorja: 18.500 W, skupna višina: 1.917 mm, skupna širina: 2.076 mm, skupna masa: 5.200 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8i, največja dolžina izdelka: 4.354 mm, število mest v zalogovniku orodij: 10, število osi: 7, Ta 7-osna stružnica TRAUB TNC 65 DGY je bila izdelana leta 2009. Opremljena je z zmogljivim revolverjem z največjo hitrostjo 4000 min⁻¹ ter visokotlačnim hladilnim sistemom s programirljivimi stopnjami tlaka. Stroj je zasnovan za obdelavo kovin in plastike ter opremljen z osjo C za numerično krmiljeno struženje in pozicioniranje. Če iščete kakovostno stružnico, razmislite o nakupu horizontalne stružnice TRAUB TNC 65 DGY, ki jo ponujamo v prodajo. Za več informacij nas kontaktirajte. Lsdpfjy Sg Nisx Afmorn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 116.688 h, največja hitrost vretena: 5.600 obr/min, potovalna razdalja osi X: 375 mm, pomik po osi Z: 450 mm, moč vretenovega motorja: 11.000 W, skupna višina: 1.800 mm, skupna masa: 3.500 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8H, največja dolžina izdelka: 2.700 mm, število osi: 3, This 3-axis horizontal lathe, TRAUB TNA 300, was manufactured in the year 2000. It features a spindle bore of 65 mm and is equipped with a high-pressure coolant system, driven tools with a power output of 4 kW, and an automatic bar change system. The machine comes with a chip conveyor and tool monitoring systems to enhance efficiency. If you're looking for a high-quality lathe, you should consider the TRAUB TNA 300 we have for sale. Contact us for further details. • Spindle bore/machine power: 65 mm • Capacity of the installed 185E collet system: max. 60 mm clamping diameter • Machine design: without tailstock • Basic equipment: included • Hydraulic hollow clamping cylinder: included • High-pressure coolant system: 12 bar / 3 bar • Control: TX8H, 32-bit technology; latest-generation processor (at the time of manufacture); parameter data on diskette • Axes/functions: • C-axis: included (numerically controlled spindle positioning and rotary axis) • Y-axis: not included • Driven tools: included; power 4 kW • Monitoring and safety: • Tool breakage monitoring: included • Tool wear monitoring: included • Automatic drive switch-off at end of material: selectable via parameter • Fault message via parameter: selectable • Guideway covers: included • Workpiece clamping: • Collet system: ROHM • Collet system compatibility: • DIN 6343 Size 48, max. diameter 42 mm • Rubberflex Series 52 compatible • Rubberflex Series 36 compatible • Fahrion Collet FM 1149 MB compatible • Fahrion Collet FM 1148 MB compatible • Electrical: • Electrical system according to: VDE / EN 60204 • Operating voltage: 400 V / 50 Hz • Auxiliary voltage: 230 V / 50 Hz • Control voltage: 24 V DC • Multi-voltage transformer: 460 / 400 / 380 / 220 / 200 V • EMC: • Compliance: Industrial class A • Standards: EN 50081 / EN 50082 / EN 55011 / EN 55022 • Machine standards: DIN EN 292; DIN EN 294; DIN EN 418; DIN EN 60204-1 • Pneumatic system: Mannesmann Rexroth ISO Additional Equipment • Chip conveyor: included • Workpiece removal device: included; via conveyor, left-hand side ejection • Bar loader preparation: included • Bar loader magazine: TRAUB DNH 61-3000 (automatic) • Loading: telescopic shuttle system • Bar shapes: round / hexagonal / square • Maximum bar length: 3200 mm • Maximum bar diameter (long bars): 63 mm • Maximum bar diameter (short pieces): 65 mm • Automatic bar change: included • Remnant removal: forward • Central adjustment of bar diameter: included • Stepless adjustment of feed force: included • Central magazine adjustment: included • No guide channel change required • No collet change required • Short remnants possible • Transverse feed system • Transport weight: approx. 2100 kg Technical Specification Counter spindle: No Driven tools: Yes Lodpey Sg Dgefx Afmsrn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 124.009 h, število osi: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, two tool turrets with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant purification system and a hinged belt conveyor for efficient chip removal. If you are looking for a high-quality lathe, consider the TRAUB TNC65 DG horizontal lathe we have for sale. Contact us for further details. • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes • C-axis on main spindle: Yes • C-axis on counter spindle: Yes • V-axis: Yes (programmable position) • Tool turrets: 2 (turret I and II) • Driven tools on turret I: Yes • Driven tools on turret II: Yes • Number of tool stations: 10 per turret • Thread cutting: Without compensation chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant equipment: Purification system with cyclone filter • Coolant tank capacity: approx. 470 liters Lrodpfxey R Uvuj Afmon • Coolant pump: Supply integrated for both turrets • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC • Accessory voltage: 230 V / 50 Hz • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Compatible with water-based coolant Additional Equipment • Chip conveyor: Hinged belt conveyor • Bar feeder: TRAUB DNH 61-3000 (including preparation) • Workpiece ejector: Yes • Workpiece removal device: Yes, with gripper • Collet system: Röhm, max. clamping diameter 60 mm Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: dober (rabljeno), Leto izdelave: 2003, CNC Turning Automation TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit), 10.4" flat display Additional V24 RS232 port in control cabinet MDE interface in control cabinet (machine running, piece counter) Tool monitoring for threading without compensating chuck Main spindle: spindle bore 36 mm, max. speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Hainbuch quick-change base body with installation aid Hainbuch manual quick-change device Sub-spindle: Sub-spindle as motorized spindle with C-axis System for sub-spindle clamping pressure, part ejector, Axfix chuck Hainbuch Top tool turret with driven tools, electronic gearbox X3 cross slide for front attachment, 5-position front attachment Driven tools Face-side cut-off machining station with driven tools Workpiece removal unit: Lredpfxszaud Aj Afmen Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Cooling/lubrication system: Tank 230 l / 7 bar / 50 l/min Internal coolant supply 30 bar High pressure 120 bar at front and rear machining station Vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Rinsing gun Hinged belt chip conveyor, discharge height 950 mm Preparation for mounting bar loader (guide tube D25, D36) Steady rest stop (shank 16x16) Collision monitoring Brankamp CMS 100 on main and sub-spindle Machine with no known defects,

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Tool monitoring, thread cutting without compensation chuck, main spindle: spindle bore: 36mm, max. speed: 6300 rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch interchangeable parts, installation aid for base body, manual Hainbuch change device, sub-spindle: sub-spindle as motor spindle, C-axis, device for counter pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool turret, driven tools, electronic gearbox, X3 cross-slide for front unit, front unit 5-station and parting-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece removal device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel), rinse gun, connected load: 33kW, control: TX8i (64bit), flat screen 10.4 inch, additional piece counter, V24 RS232 and MDE interface in control cabinet, operating hours: 124,705h, with bar loader FMB TURBO 5-42XT/3200/C, chip conveyor, coolant system, and basic set of stationary and driven tool holders. On-site inspection possible. Lodpfsy U Nq Isx Afmjrn