Traub Tnc 65 nakup rabljenega (91)

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Swing diameter over bed: 180 mm Turning length: 490 mm Swing diameter: 450 mm Cross travel: Z-axis travel: 168 mm Control: Traub TX8D Spindle speed: 20 - 4000 rpm Spindle bore: Ø 60 mm Operating hours / Power-on hours: 23,495 h Tool turret: 12 tools Total power requirement: 38 kW Machine weight approx.: 4.2 t Njdju Ix N Sepfx Aqqjwh Machine dimensions approx. (LxWxH): 3.6 x 2.5 x 2.2 m Tool holder cylindrical shank DIN 69880 (VDI 3425) Ø 40x63 Röhm power chuck Ø 200 mm hydraulic clamping Operation via double foot switch and control panel/operator console. Coolant system The Traub has an integrated chip conveyor with a discharge height of 1,100 mm (currently not functional). Accessories: various small parts 8 various machine feet without tailstock i.D.

Stanje: rabljeno, CNC Lathe TRAUB Type TND 400 Serial No. 708 Year of manufacture: 1996 CNC Control: TRAUB TX 8 F Nominal turning diameter: 400 mm Swing diameter over bed max. 470 mm Spindle bore in draw tube: 65 mm Spindle drive motor output: 22 kW Total power requirement: 35 kW Electrical connection: 380 Volt, 50 Hz - Electronic handwheel - RS 232 data interface - Disc turret with 12 tool stations VDI 40 - Including 8 VDI 40 tool holders - 3-jaw power chuck Ø 225 mm SMW Autoblok, type KNCS-N-Ø 225-65 Including a large assortment of chuck jaws - Hydraulic hollow clamping cylinder SMW, type ZHDAS-130-67 - Chip conveyor KNOLL, type 200 S-1/600 - Coolant system - Hydraulic unit freestanding (L x W x H: 650 x 500 x 1000 mm) Space requirement (L x W x H): 4800 x 2000 x 2100 mm Space requirement main machine (L x W x H): 3500 x 2000 x 2100 mm Space requirement chip conveyor (L x W x H): 4500 x 700 x 1550 mm Weight approx. 5 tons Good condition Njdpszacwdefx Aqqswh Machine ready for demonstration. Hollow clamping cylinder for workpiece clamping needs to be repaired.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 18 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.0 / 5.5 kW - Minimum C-axis resolution: 0.001° - Z-axis travel: 205 mm SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle drive power: 1.5 / 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turret heads: 2 UPPER TURRET - Number of positions: 8 - Number of driven positions: 8 - Driven tool speed: 12,000 rpm - Driven tool power: 1 / 2 kW - Travel X/Z: 165 / 550 mm - Travel Y: -40 / +25 mm - Rapid traverse rate (X/Y/Z): 21 / 21 / 42 m/min - B-axis stroke: 100° LOWER TURRET - Number of positions: 7 - Number of driven positions: 7 - Driven tool speed: 12,000 rpm - Driven tool power: 1.5 / 2.5 kW - Travel X/Z: 120 / 250 mm - Travel Y: -20 / +40 mm - Rapid traverse rate (X/Y/Z): 21 / 21 / 50 mm/min SUBSEQUENT MACHINING - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 10,000 rpm - Driven tool power: 1 / 2 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 24 kVA WEIGHT AND DIMENSIONS - Floor space required: 3,060 x 1,480 mm - Machine height: 2,420 mm Nsdpfxezbvnlo Aqqswh - Machine weight: 4,300 kg MACHINE HOURS - Operating hours: 14,998 h - Spindle hours: 11,177 h ACCESSORIES - Control: Traub TX 8i-s - Driven guide bushing - Parts removal - Parts conveyor belt - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar feeder: IEMCA ELITE 220 / 32 XL - Oil mist extraction: ELBARON RON/A 1500 DH - Fire extinguishing system * * NB: Functionality not guaranteed. Must be inspected by a qualified company on behalf of the buyer.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 116.688 h, največja hitrost vretena: 5.600 obr/min, potovalna razdalja osi X: 375 mm, pomik po osi Z: 450 mm, moč vretenovega motorja: 11.000 W, skupna višina: 1.800 mm, skupna masa: 3.500 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8H, največja dolžina izdelka: 2.700 mm, število osi: 3, This 3-axis horizontal lathe, TRAUB TNA 300, was manufactured in the year 2000. It features a spindle bore of 65 mm and is equipped with a high-pressure coolant system, driven tools with a power output of 4 kW, and an automatic bar change system. The machine comes with a chip conveyor and tool monitoring systems to enhance efficiency. If you're looking for a high-quality lathe, you should consider the TRAUB TNA 300 we have for sale. Contact us for further details. • Spindle bore/machine power: 65 mm • Capacity of the installed 185E collet system: max. 60 mm clamping diameter • Machine design: without tailstock • Basic equipment: included • Hydraulic hollow clamping cylinder: included • High-pressure coolant system: 12 bar / 3 bar • Control: TX8H, 32-bit technology; latest-generation processor (at the time of manufacture); parameter data on diskette • Axes/functions: • C-axis: included (numerically controlled spindle positioning and rotary axis) • Y-axis: not included • Driven tools: included; power 4 kW • Monitoring and safety: • Tool breakage monitoring: included • Tool wear monitoring: included • Automatic drive switch-off at end of material: selectable via parameter • Fault message via parameter: selectable • Guideway covers: included • Workpiece clamping: • Collet system: ROHM • Collet system compatibility: • DIN 6343 Size 48, max. diameter 42 mm • Rubberflex Series 52 compatible • Rubberflex Series 36 compatible • Fahrion Collet FM 1149 MB compatible • Fahrion Collet FM 1148 MB compatible • Electrical: • Electrical system according to: VDE / EN 60204 • Operating voltage: 400 V / 50 Hz • Auxiliary voltage: 230 V / 50 Hz • Control voltage: 24 V DC • Multi-voltage transformer: 460 / 400 / 380 / 220 / 200 V • EMC: • Compliance: Industrial class A • Standards: EN 50081 / EN 50082 / EN 55011 / EN 55022 • Machine standards: DIN EN 292; DIN EN 294; DIN EN 418; DIN EN 60204-1 • Pneumatic system: Mannesmann Rexroth ISO Additional Equipment • Chip conveyor: included • Workpiece removal device: included; via conveyor, left-hand side ejection • Bar loader preparation: included • Bar loader magazine: TRAUB DNH 61-3000 (automatic) • Loading: telescopic shuttle system • Bar shapes: round / hexagonal / square • Maximum bar length: 3200 mm • Maximum bar diameter (long bars): 63 mm • Maximum bar diameter (short pieces): 65 mm • Automatic bar change: included Nwodpfxsy Sg Dge Aqqoh • Remnant removal: forward • Central adjustment of bar diameter: included • Stepless adjustment of feed force: included • Central magazine adjustment: included • No guide channel change required • No collet change required • Short remnants possible • Transverse feed system • Transport weight: approx. 2100 kg Technical Specification Counter spindle: No Driven tools: Yes

Stanje: dober (rabljeno), Leto izdelave: 2003, CNC Turning Automation TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit), 10.4" flat display Additional V24 RS232 port in control cabinet MDE interface in control cabinet (machine running, piece counter) Tool monitoring for threading without compensating chuck Main spindle: spindle bore 36 mm, max. speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Hainbuch quick-change base body with installation aid Nwodpfxozaud Ae Aqqeh Hainbuch manual quick-change device Sub-spindle: Sub-spindle as motorized spindle with C-axis System for sub-spindle clamping pressure, part ejector, Axfix chuck Hainbuch Top tool turret with driven tools, electronic gearbox X3 cross slide for front attachment, 5-position front attachment Driven tools Face-side cut-off machining station with driven tools Workpiece removal unit: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Cooling/lubrication system: Tank 230 l / 7 bar / 50 l/min Internal coolant supply 30 bar High pressure 120 bar at front and rear machining station Vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Rinsing gun Hinged belt chip conveyor, discharge height 950 mm Preparation for mounting bar loader (guide tube D25, D36) Steady rest stop (shank 16x16) Collision monitoring Brankamp CMS 100 on main and sub-spindle Machine with no known defects,

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Tool monitoring, thread cutting without compensation chuck, main spindle: spindle bore: 36mm, max. speed: 6300 rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch interchangeable parts, installation aid for base body, manual Hainbuch change device, sub-spindle: sub-spindle as motor spindle, C-axis, device for counter pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool turret, driven tools, electronic gearbox, X3 cross-slide for front unit, front unit 5-station and parting-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece removal device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel), rinse gun, connected load: 33kW, control: TX8i (64bit), flat screen 10.4 inch, additional piece counter, V24 RS232 and MDE interface in control cabinet, operating hours: 124,705h, with bar loader FMB TURBO 5-42XT/3200/C, chip conveyor, coolant system, and basic set of stationary and driven tool holders. On-site inspection possible. Njdpfoy U Nq Isx Aqqewh

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Swiss-Type Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of Manufacture: 2009 TECHNICAL SPECIFICATIONS Headstock - Max. bar diameter (mm): 12.7 - Quality of round stock (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - Slide travel X1 (mm): 35 - Slide travel Y1 (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - Slide travel X2 (mm): 35 - Slide travel Z2 (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Driven tools for Tool Carrier 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (number): 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Sub-Spindle / Front Attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool stations (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (deg): 0.001 Rear Slide Dragged / Fixed - Z-stroke dragged with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool stations (number): 3 Nedpfx Aoy N A S Usqqjwh Rear Slide (X4-axis) - Stroke X4 (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool stations (number): 4 Driven tools for rear slide (with X4 axis) - Max. speed (rpm): 10,000 - Driven tools max. (number): 4 - Clamping diameter for drilling tools - driven (mm): 0.5–7 - non-driven (mm): 0.5–10 Coolant System - Pump pressure single stage (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 FEATURES - Chip conveyor - Bar feeder FMB Minimag 18 - High pressure system - Fire extinguishing system Subject to changes and errors in the technical data and specifications.

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe Nwsdpfxot E Dbyo Aqqeh TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, krivinsko krmiljen avtomatski stružni stroj vključno z zalogovnikom Nwodoy R Tqqepfx Aqqoh - proizvajalec PMT (Traub India) - največji premer palic 25 mm - konjiček - 2 navpična nosilca orodij - 2 vodoravna nosilca orodij - teža ca. 650 kg - mere (D x Š x V) ca. 1000 x 600 x 1500 mm - zalogovnik za palice IEMCA AS 325/62 (največja dolžina palic 6.200 mm)

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, krivinsko krmiljen avtomatski stružni stroj vključno z zalogovnikom - proizvajalec PMT (Traub India) - največji premer palic 25 mm - konjiček - 2 navpična nosilca orodij Nedpfx Asy R Tm Ssqqjwh - 2 vodoravna nosilca orodij - teža ca. 650 kg - mere (D x Š x V) ca. 1000 x 600 x 1500 mm - zalogovnik za palice IEMCA AS 325/62 (največja dolžina palic 6.200 mm)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, krmiljeno krivinsko stružno avtomat vključno z dodajalnim magazinom - maks. premer palice 25 mm - konjiček - 2 navpična nosilca orodij - 2 vodoravna nosilca orodij - teža pribl. 650 kg - dimenzije (DxŠxV) pribl. 1000 x 600 x 1500 mm - podajalnik palic IEMCA AS 325/62 Njdpfjy R Tg Sjx Aqqewh (maks. dolžina palice 6.200 mm)

Stanje: dober (rabljeno), Leto izdelave: 1975, Funkcionalnost: popolnoma funkcionalen, 1 x avtomatski stružni stroj Traub A 15 z avtomatskim podajalnikom materiala Iemca AS 325/32 + naprava za vrtanje in rezanje navojev Lepo ohranjen celovit stroj v dobrem tehničnem stanju. Nwodpsy R Nwyofx Aqqsh Stroj je možno pregledati pod napetostjo ali pa lahko pošljemo video.

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), Priključek na električno omrežje: 75A, priključna moč: 35kW, krmiljenje: Traub SYSTEM TX 8F, teža: cca 4,5t, delovne ure: 84.126h. Stroj ima težave pri obdelavi naklonov. Ogled na lokaciji je možen. Nwsdey Tx Rzspfx Aqqoh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 8.000 obr/min, prehod palice: 32 mm, model krmilnika: Traub TX8i-S, število mest v zalogovniku orodij: 12, Oprema: transportni trak za ostružke, TEHNIČNI PODATKI Premer prehoda palice: 26 / 32 mm Maks. hitrost glavnega vretena: 8.000 obr/min Osi: X1 / Y1 / Z1, C-os integrirana v glavno vreteno Revolver: 1 Število orodij: 12 Pogonska moč: 6,7 kW (100 % ED) / 10,7 kW (40 % ED) Navor: 21 Nm (100 % ED) / 32 Nm (40 % ED) PODROBNOSTI O STROJU Čas vklopa: 116.721 h Obratovalne ure: cca 48.000 h Krmiljenje: Traub TX8i-S Dimenzije & teža Dimenzije (D × Š × V): cca 4,4 × 1,4 × 1,7 m Teža stroja: cca 4.000 - 4.200 kg OPREMA Nodpfxeyzxp Ts Aqqswh Transporter za ostružke: lamelni trak, višina izmeta cca 950 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 47.600 h, številka stroja/vozila: 325, Dobro ohranjena Njdsh Dzqljpfx Aqqowh

Leto izdelave: 1982, stanje: pripravljen za uporabo (rabljen), Na voljo je splošni CNC stružni stroj s poševnim ležiščem Traub. Število orodnih mest: 12, orodna glava: VDI40, premer struženja: 180 mm, največji premer obrata: 450 mm, največja dolžina struženja: 490 mm, premer prehoda palice: 60 mm, pomik X/Z: 160 mm/490 mm, hitri pomik: 15 m/min, delovni pomik: 10 m/min, dimenzije stroja X/Y/Z: pribl. 3100 mm/2000 mm/1800 mm, teža: pribl. 4250 kg, krmiljenje: Traub System TX-8. Možen je ogled na lokaciji. Nedpfx Aey I Adbsqqswh

Stanje: rabljeno, Leto izdelave: 2005, Premer struženja 5-42 mm Nwjdsy Nd U Djpfx Aqqjh Dolžina struženja 3200 mm Krmiljenje Traub TX8i X-os 50 mm Z-os 50 mm Teža stroja pribl. 4000 kg 21817 ur

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 19.441 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6000816, stružna dolžina: 50 mm, največja hitrost vretena: 12.000 obr/min, prehod palice: 12 mm, model krmilnika: Mitsubishi TX-8i, največja hitrost protivretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Nodjx Hxv Dspfx Aqqowh Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet, max. configuration: 2,000 kg Weight without control cabinet, max. configuration: 1,600 kg Weight with control cabinet, min. configuration: 1,200 kg Weight without control cabinet, min. configuration: 850 kg Operating Hours Control power-on hours: 19,441 h Automatic hours 1: 7,607 h Automatic hours 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanically prepared interface Various fixed holders Rinsing pistol

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 43.000 h, Funkcionalnost: popolnoma funkcionalen, moč vretenovega motorja: 3.700 W, največja hitrost vretena: 10.000 obr/min, skupna masa: 5.000 kg, skupna širina: 1.500 mm, skupna dolžina: 4.000 mm, skupna višina: 2.400 mm, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 40 m/min, moč: 24 kW (32,63 KM), pomik po osi Z: 205 mm, Oprema: dokumentacija / priročnik, Nudimo naprodaj enega izmed naših strojev, ki ga izločamo kot del načrtovane obnove našega strojeparka. Stroj je TRAUB TNL 18P stružnica z drsnim vretenom, letnik 2013, ki je v dobrem tehničnem stanju. Razlog za prodajo je nabava nove tehnologije v okviru nadgradnje strojeparka. Trenutne delovne ure znašajo 43.000. Ponudba vključuje tudi podajalnik palic FMB Minimag 20/3200, ki zagotavlja nemoteno in učinkovito dovajanje materiala v stroj. V okviru dobave lahko zagotovimo tudi notranjo opremo, vključno z vodili in vpenjalnimi vložki za glavno vreteno, protivreteno in podajalnik palic, primerno za materiale do premera 12 mm. Nodpfx Aqsxdk Uksqjwh Za več informacij me prosim kontaktirajte.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 55.000 h, največja hitrost vretena: 8.000 obr/min, skupna masa: 7.000 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8i-s, število osi: 7, This 7-axis TRAUB TNL 32-7 horizontal lathe was manufactured in 2013. It is ideal for precision turning operations and offers robust performance and reliability. Take advantage of the opportunity to purchase this TRAUB TNL 32-7 horizontal lathe. Contact us for more information. Additional Equipment • Coolant pump 3 bar / Coolant pump 8 bar • Chip conveyor, hinge belt type H = 1000 mm • Length measuring system X-axis for upper/lower turret • Fabric filtration for coolant: filtration grade approx. 30–40 µm • High-pressure coolant pump 20 bar • CO2 fire extinguishing system Kraft & Bauer Machine Advantages Nwodpfx Aqoyrd H Doqjh Technical machine advantages • Maximum bar diameter: 32 mm • Spindle stroke: 305 mm • Automatic bar feeder: fmb lsk38-3200, max. bar length 3200 mm • Upper turret: x/y/z/h-axis, 10 tools, double drive • Lower turret: x/y/z/h-axis, 9 tools, same drive; counter spindle with independent drive • Conveyor belt for finished parts with gripper • Machine operated exclusively with cutting oil

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 8.000 obr/min, število osi: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control unit with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle offers a 32-mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It includes an upper tool turret with double drive and a lower turret with nine tool holders. Consider the opportunity to purchase this TRAUB TNL 32 Swiss-type lathe. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; TFT color flat screen; electronic handwheel Nedpfx Aqex D Drcsqowh • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), thread cutting without compensating chuck, part-off tool breakage monitoring, part-off tool ejection monitoring, axis disabling, T-ATC • Main spindle: motor spindle with hollow clamping system; 32 mm bar/drill capacity; C-axis max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; double drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter spindle operation • Measurement/feedback: glass scales on X axes (upper and lower turret); encoder on C axis • Backworking: 8-position rear station with combined drive for up to 3 tools; ready for internal coolant feed • Clamping: clamping direction reversal device and counter clamping pressure unit on main and counter spindle • Coolant system: standard unit with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), flow rate 19 l/min • Extraction: D 150 mm connection for central extraction system Additional equipment • None specified (no robots, bar feeders, chip conveyors, or external automation listed)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, automatic lathe Traub Nwsdpfx Aqswcqv Ioqsh

Leto izdelave: 2022, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, TRAUB suha kamnoseška žaga MULTI-STONE 520 — letnik 2022 Nwedpfx Aey A E Nijqqjh Rabljeno, iz profesionalne najemne flote podjetja Kurt König Baumaschinen GmbH, Einbeck. Stanje in opombe: - Stanje: Rabljeno iz najema, redno servisirano - Funkcija: Popolnoma delujoča - Slike izdelka sledijo — v primeru zanimanja nas kontaktirajte za aktualne fotografije - Ogled možen po dogovoru v 37574 Einbeck Cena: 3.750 EUR + DDV | EXW Einbeck | Dostava na zahtevo

Stanje: zelo dobro (rabljeno), CNC machine Traub TNL 26 Condition: used, well maintained Nodpfxshlp Sds Aqqewh Sale without any warranty

Stanje: dober (rabljeno), Odmikač brusilnih plošč, odmikač lončastih plošč, odmikač za dvostranski brusilnik, odmikač za ploščinsko brusilko, odmikač za cilindrično brusilko, glava za oblačenje, glava za uravnavanje za brusilne stroje - Količina: 1 kos na voljo - Dimenzije: 325/130/V135 mm Nedod R Ikdjpfx Aqqswh - Teža: 7,3 kg