Tornos Sas 16 nakup rabljenega (130)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This Tornos DECO 10e was manufactured in 2010. It is a Swiss sliding headstock lathe featuring a movable spindle, direction-dependent spindle stop, and an independent sub-spindle. The machine is equipped with a drum-type bar feeder and an integrated 25-liter hydraulic unit. It is ideal for precise small-batch turning and supports bar diameters from 1 to 10 mm, with up to 8 mm possible without special preparation. Contact us for more information regarding this machine. Cedpfx Aasx D Dnde Ssgn Additional Information • Electrical control cabinet • Cross slide with 4 tool holders T11-T24, supporting vertical and horizontal movement • 3 presettable turning tool holders • 4 fixed tool holders • Thread-cutting attachment for ESX 12 collet chuck • Movable headstock • Independent sub-spindle • Swiveling workpiece holder at the sub-spindle • Lubrication device for guide bushing with filter • Drum-type bar feeder • Integrated 25-liter hydraulic unit with filter • Front and rear support feet, center height 1100 mm • “HYBRID 10+5” drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, processing bars up to 8 mm without special preparation • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12,000 rpm Optional: Comprehensive package of measuring devices

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This TORNOS DECO 10a was manufactured in 2010. It features a sliding headstock, a direction-dependent spindle stop, and cross slides with tool holders. The machine is equipped with an independent sub-spindle, a swiveling workpiece holder, and a lubrication device. Additionally, it includes a bar feeder, an integrated hydraulic unit, and an electrical control cabinet. If you are looking for a high-quality lathe, you should consider the TORNOS DECO 10a we have for sale. Please contact us for further information. Additional Information • Cross slide with 4 tool holders T11-T24, with vertical and horizontal movement • 3 pre-set turning tool holders • 4 stationary tool holders • Sliding headstock Cgjdpfx Aaex D Dmts Sen • Direction-dependent spindle stop S1 • Independent sub-spindle • Swiveling workpiece holder on the sub-spindle • Lubrication device for guide bush with filter • Thread cutting device for ESX 12 collet chuck • Drum-type bar feeder • Integrated 25-liter hydraulic power unit with filter • Support foot front/rear, center height 1100 mm • "HYBRID 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation up to 8 mm • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V

Stanje: rabljeno, TEHNIČNI PODATKI - Premer palic: 20 [mm] - Maks. dolžina palic: 3200 [mm] ELEKTRIČNO NAPAJANJE - Napajalna napetost: 440 [V] Cgedpfx Ajyhhxcoa Son TEŽA IN DIMENZIJE - Potreben prostor: 4200x600 [mm] - Višina stroja: 1150 [mm] - Teža stroja: 420 [kg]

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Krmilna enota Znamka: FANUC Model: Series Oi-TD Glavni pogon Število osi: 5 Hitrost vretena: 10.000 min⁻¹ Moč motorja vretena: 3,7 kW Ta 5-osni TORNOS Delta 20/5 je bil izdelan leta 2008. Opremljen je z dvojnima vretenoma, ki lahko obdelujeta palice premera do 20 mm in dolžine do 170 mm, z največjo hitrostjo 10.000 min⁻¹. Krmiljen je s CNC Fanuc serije Oi-TD in ima zalogovnik za podajanje palic Robobar. Ta švicarski tip stružnice je odličen za precizno obdelavo. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Cgedpfox Sz A Dox Aa Ssn Struženje

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2017, For sale: CNC Swiss-type automatic lathe TORNOS GT 26/6 II, including bar feeder Manufacturer: TORNOS Model: GT 26/6 II Year of manufacture: 2017 Maximum bar capacity: 26 mm CNC control: FANUC High-dynamic turning and milling operations Suitable for complex series production parts Axis / spindle concept – TORNOS GT 26/6 II Spindle concept: - 1 main spindle - 1 sub spindle - Synchronized machining for highly productive series manufacturing Axis concept: Linear axes: - X1 / Z1 – Main spindle - X2 / Z2 – Sub spindle - X3 – Cross machining / auxiliary tools C-axes: - C1 – Main spindle - C2 – Sub spindle Number of CNC axes: 6 CNC axes Machining capabilities: - Simultaneous main and sub spindle operation - Milling and cross machining with C-axes Codpfox N Dg Tsx Aa Ssgn - High process integration and short cycle times Machine weight: approx. 3,200 kg Transport dimensions (L × W × H): approx. 3,200 × 1,800 × 2,000 mm Bar feeder Weight: approx. 700 kg Dimensions (L × W × H): approx. 3,500 × 800 × 1,500 mm We offer commissioning as an additional service if required. The machine can be inspected near Heilbronn by prior arrangement. Loading can be provided. Technical data, accessories, and machine descriptions are non-binding.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 28.791 h, Ta TORNOS DECO 20A je bila proizvedena leta 2006. Gre za robusten švicarski stružni stroj s prehodom palice 25,4 mm in zmogljivostjo do 21 fiksnih ter 15 rotirajočih orodij. Opremljen je z nalagalnikom IEMCA BOSS 332 E/R in transporterjem CONVEYORS IND. ASS. TMTPF 2294, ki povečujeta delovno učinkovitost. Izkoristite priložnost za nakup tega švicarskega stružnega stroja TORNOS DECO 20A. Za dodatne informacije o tej napravi nas kontaktirajte. Dodatna oprema • Nalagalnik • Transporter Cgjdpfx Aaoyan Ius Son • Avtomatski sistem za gašenje požara Prednosti stroja Tehnične prednosti stroja • Največje število fiksnih/rotirajočih orodij: 21/15 Dodatne informacije Stroj je še vedno priključen na elektriko.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 33.594 h, Stroj TORNOS DECO 2000/13 je bil izdelan leta 2000. Robustni švicarski stružni stroj s premerom preboja palice 16 mm in največjo močjo vretena 9,7 kWh. Opremljen je z nalagalnikom IEMCA GENIUS 226/32 ter transporterjem CONVEYORS IND. ASS. TMTPF 1440. Vgrajen je tudi avtomatski protipožarni sistem Kraft & Bauer. Izkoristite priložnost za nakup tega švicarskega stružnega stroja TORNOS DECO 2000/13. Za več informacij nas kontaktirajte. Dodatna oprema Csdpfoyan Ibjx Aa Sjgn • Nalagalnik • Transporter • Avtomatski protipožarni sistem Prednosti stroja Tehnične prednosti stroja • Največje število fiksnih/vrtečih orodij: 20/16 • Premer preboja palice: 16 mm • Možnost visokih vrtljajev vretena Dodatne informacije Stroj je še vedno priključen na elektriko.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Ta stroj TORNOS DECO 2000/13 je bila izdelana leta 1999. Ima prehodno odprtino za palice s premerom 16 mm in lahko sprejme do 20 fiksnih orodij ter 16 vrtljivih orodij. Opremljena je s podajalnikom IEMCA, transporterjem CONVEYORS IND. ASS. in dodatnim rezervoarjem za oljni filter, kar zagotavlja učinkovito delovanje stroja. Izkoristite to priložnost in kupite ta švicarski stružni stroj TORNOS DECO 2000/13. Za več informacij o tem stroju nas kontaktirajte. Dodatna oprema • Podajalnik Codjyalqmepfx Aa Ssgn • Transporter • Dodatni rezervoar za oljni filter • Dodatni rezervoar za oljni filter Prednosti stroja Tehnične prednosti stroja • Prehod palice: 16 mm • Največje število fiksnih orodij: 20 • Največ vrtljivih orodij: 16 Dodatne informacije Stroj je še vedno priključen na električno omrežje.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 42.929 h, moč vretenovega motorja: 5.600 W, največja hitrost vretena: 8.000 obr/min, skupna masa: 3.500 kg, proizvajalec krmilnikov: FANUC, Ta TORNOS MultiSwiss 6x14 je bila proizvedena leta 2011. Opremljena je s šestimi vreteni za simultano obdelavo, z zmogljivostjo palice 14 mm in maksimalno dolžino obdelovanca 40 mm. Glavno vreteno doseže hitrost do 8.000 vrt/min in ga poganja motor z močjo 5,6 kW. Izkoristite priložnost za nakup tega švicarskega stružnega stroja TORNOS MultiSwiss 6x14. Za več informacij nas kontaktirajte. Cjdpfx Aajyairuj Sjgn Prednosti stroja Tehnične prednosti stroja • Zmogljivost palice (največji premer): 14 mm • Največja dolžina obdelovanca: 40 mm • Število vret. : 6 vret. za simultano obdelavo Dodatne informacije Stroj je še vedno priključen na elektriko.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 35.324 h, moč vretenovega motorja: 11.000 W, največja hitrost vretena: 8.000 obr/min, proizvajalec krmilnikov: FANUC, število osi: 10, Cette Tornos-Bechler MultiDeco 20-6 à 10 axes a été fabriquée en 2001. Elle dispose d’un diamètre de barre maximal de 20 mm, de vitesses de broche allant jusqu’à 8 000 tr/min et d’une puissance moteur de broche principale d’environ 11 à 15 kW. Elle est équipée de plusieurs stations d’outils avant et arrière ainsi que d’un convoyeur de copeaux en option. Si vous recherchez un tour de haute qualité, nous vous recommandons la Tornos-Bechler MultiDeco 26-6 que nous proposons à la vente. Contactez-nous pour plus d’informations sur cette machine. Équipement supplémentaire • Système de refroidissement : huile ou émulsion • Convoyeur de copeaux : en option Avantages de la machine Avantages techniques de la machine Cgjdpeyairnjfx Aa Sjn • Stations d’outils : plusieurs stations d’outils avant et arrière (modulaires) Informations complémentaires Diamètre max. de barre : 20 mm Longueur max. de pièce : env. 100-120 mm (par serrage) Unité d’usinage arrière : Oui (configuration 3 axes)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 64.409 h, moč vretenovega motorja: 18.000 W, največja hitrost vretena: 8.000 obr/min, proizvajalec krmilnikov: FANUC, število osi: 10, Ta 10-osna Tornos-Bechler MultiDeco 26-6 je bila izdelana leta 2000 in omogoča maksimalni premer palice 26 mm ter dolžino obdelovanca do 120 mm na eno vpenjanje. Obratuje z vrtljaji vretena do 8.000 min⁻¹ in glavno pogonsko močjo 18 kW. Izkoristite priložnost za nakup tega švicarskega stružnega stroja Tornos-Bechler MultiDeco 26-6. Za dodatne informacije o stroju nas kontaktirajte. Dodatna oprema • Možnost zadnjega obdelovanja: Da Prednosti stroja Tehnične prednosti stroja • Največji premer palice: 26 mm • Največja dolžina kosa: pribl. 120 mm (na eno vpenjanje) Dodatne informacije Stroj je še vedno pod napetostjo. Csdjyairhopfx Aa Segn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, obratovalne ure: 54.044 h, moč vretenovega motorja: 15.000 W, največja hitrost vretena: 3.500 obr/min, proizvajalec krmilnikov: FANUC, Ta TORNOS MultiDeco 20-8b je bila izdelana leta 1997. Opremljena je z 8 glavnih vreteni in kontra vretenom, ki omogočajo maksimalni premer palice 20 mm. Hitrost glavnega vretena dosega do 3.500 vrt/min, moč vretena znaša od 15 do 18,5 kW. Če iščete kakovosten stružni stroj, priporočamo, da razmislite o TORNOS MultiDeco 20-8b, ki jo ponujamo v prodajo. Za več informacij nas kontaktirajte. Prednosti stroja Tehnične prednosti stroja • Maksimalni premer palice: 20 mm Cgedpfxoyairbo Aa Ssn Dodatne informacije Stroj je še vedno pod napetostjo.

Stanje: rabljeno, TORNOS Micro 8 je CNC avtomatski stružni stroj, zasnovan za visoko precizno obdelavo z visoko natančnostjo in zanesljivostjo. Glavne zmogljivosti: 5 osi, maks. dolžina obdelovanca 20 mm, maks. premer palice 10 mm; vpenjalna glava W15 (vreteno) in F13 (proti-vreteno). Tehnični podatki: brezstopenjsko nastavljivo hitrostno območje vretena 0–12000 obr/min; hitro pomikanje X 20 m/min, Y 40 m/min, Z 20 m/min; motor vretena/proti-vretena 2,2/3,7 kW; priključek 3x400 V 50 Hz; skupna moč 8 kVA; teža pribl. 1600 kg; dimenzije 1670×870×1650 mm. Oprema: LNS TRYTON 112 nalagalni magazin, svetilka, hladilna naprava, odsesovalnik oljne megle, RS232 vmesnik, signalna luč. Dosega majhne tolerance; primeren za avtomobilsko, urarsko, orodjarsko, letalsko in medicinsko industrijo. Cgodpfx Aaox S Nwco Sen

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 21 - Number of spindles: 6 - Number of sub spindles: 1 - Max. number of tools: 18 - Max. number of tools for sub-spindle machining: 2 SPINDLES - Max. bar diameter: 4–14 mm - Spindle speed: 8,000 rpm - Spindle drive power: 5.6 kW - Max. workpiece length: 40 mm - Z-axis travel: 50 mm SUB SPINDLE - Max. bar diameter: 14 mm - Spindle speed: 8,000 rpm - Spindle drive power: 5 kW - Z-axis travel: 150 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 70 kVA WEIGHT AND DIMENSIONS - Footprint: 5,920 × 1,440 mm - Machine height: 2,120 mm - Machine weight: 7,000 kg MACHINE HOURS - Power-on hours: 35,049 h EQUIPMENT - Control: Fanuc - Programming system: TB Deco ADV (integrated PC) - Parts removal - Parts ejector - Chip conveyor - Coolant tank: 900 l Codsuhavwjpfx Aa Ssgn * with high-pressure pump * with paper filter - Bar feeder: integrated * Max. bar length: 1,500 mm - Fire extinguishing system* * NB: Serviceability not guaranteed. Please have a qualified company of the buyer check the system.

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 8 Cgjdpeyacvtofx Aa Sjn - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machinable length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of positions: 8 - Number of driven positions: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT DEVICE - Number of positions: 4 BACKWORKING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 26 kVA DIMENSIONS AND WEIGHT - Footprint: 2170 x 1140 mm - Machine height: 1890 mm - Machine weight: 2,800 kg MACHINE HOURS - Power-on hours: 30,788 h ACCESSORIES - Control: Fanuc 31i-B - 3-color status signal lamp - Driven tool motorization at: S11, S21, S51 - Driven guide bushing - Parts catcher - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system * Note: Functionality not guaranteed. To be checked by a qualified company on behalf of the buyer. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. workable length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° Cgodeyacvmspfx Aa Son TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of positions: 8 - Number of driven positions: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT ATTACHMENT - Number of positions: 4 SECONDARY MACHINING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA DIMENSIONS AND WEIGHT - Footprint: 2170 x 1140 mm - Machine height: 1890 mm - Machine weight: 2,800 kg MACHINE HOURS - Hours powered on: 32,783 h EQUIPMENT - Controller: Fanuc 31i-B - 3-color status lamp - Driven tool motorization at: S11, S21, S51 - Driven guide bushing - Parts removal - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system* NB: Functionality not guaranteed. Should be checked by a qualified company on behalf of the buyer. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 [mm] - Max. machining length: 190 [mm] - Spindle speed: 15,000 [rpm] - Spindle drive power: 4 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 13 [mm] - Spindle speed: 15,000 [rpm] - Spindle drive power: 4 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] TOOL HOLDER 2 - Number of positions: 8 - Number of driven positions: 2 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] FRONT TOOL POST - Number of positions: 4 BACKWORKING UNIT - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] - Driven tool power: 0.75 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 26 [kVA] WEIGHT AND DIMENSIONS - Floor space required: 2170 x 1140 [mm] - Machine height: 1890 [mm] - Machine weight: 2,800 [kg] MACHINE HOURS - Power-on hours: 31,941 [h] ACCESSORIES - Control: Fanuc 31i-B - 3-colour status lamp - Driven tool motorization at: S11, S21, S51 - Driven guide bushing - Parts catcher - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system * Cjdpfxoyacvge Aa Sjgn NB: Functionality not guaranteed. To be checked by a qualified company of the buyer. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machining length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of stations: 8 - Number of powered stations: 3 Cedpoyacvaefx Aa Ssgn - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of stations: 8 - Number of powered stations: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT TOOL POST - Number of stations: 4 BACK WORKING - Number of stations: 8 - Number of powered stations: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Footprint: 2170 x 1140 mm - Machine height: 1890 mm - Machine weight: 2,800 kg MACHINE HOURS - Powered-on hours: 44,456 [h] EQUIPMENT - Control: Fanuc 31i-B - 3-color status lamp - Driven tool motorization at: S11, S21, S51 - Powered guide bushing - Parts catcher - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system* NB: Functionality not guaranteed. Must be checked by the buyer’s qualified company. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 [mm] - Max. machinable length: 190 [mm] - Spindle speed: 15,000 [rpm] Cedpfx Aaeyacu Ne Sjgn - Spindle drive power: 4 [kW] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Max. bar diameter: 13 [mm] - Spindle speed: 15,000 [rpm] - Spindle drive power: 4 [kW] - Minimum C-axis resolution: 0.001 [deg] TOOL HOLDER 1 - Number of positions: 8 - Number of powered positions: 3 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] TOOL HOLDER 2 - Number of positions: 8 - Number of powered positions: 2 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] FRONT TOOL POST - Number of positions: 4 BACKWORKING - Number of positions: 8 - Number of powered positions: 4 - Driven tool speed: 6,000 [rpm] - Driven tool power: 0.75 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 26 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2170 x 1140 [mm] - Machine height: 1890 [mm] - Machine weight: 2800 [kg] MACHINE HOURS - Power-on hours: 44,449 [h] EQUIPMENT - Control unit: Fanuc 31i-B - 3-color status lamp - Motorization for driven tools at: S11, S21, S51 - Powered guide bushing - Parts catcher - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system* NB: Functionality not guaranteed. Should be checked by a qualified company appointed by the buyer. - Electrical transformer

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machinable length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 - Number of motorised positions: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of positions: 8 - Number of motorised positions: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT TOOL POST - Number of positions: 4 BACKWORKING - Number of positions: 8 - Number of motorised positions: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA DIMENSIONS AND WEIGHT - Footprint: 2,170 x 1,140 mm - Machine height: 1,890 mm - Machine weight: 2,800 kg OPERATING HOURS - Power-on hours: 48,838 h EQUIPMENT - CNC control: Fanuc 31i-B - 3-color status signal tower - Motorisation for driven tools at: S11, S21, S51 - Powered guide bushing - Parts catcher - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter Cedpfeyacu Ajx Aa Sogn - Bar loader: TORNOS SBF326-3.2M - Fire extinguishing system * NB: Functionality not guaranteed. To be checked by qualified personnel of the buyer. - Electrical transformer

Stanje: dober (rabljeno), Leto izdelave: 1982, 6-spindle bar automatic lathe Make: TORNOS Type: AS Year of manufacture: 1982 with: synchronising unit Csdpfx Aasvwmcuj Sjgn thread cutting device chip conveyor bar feeder

Leto izdelave: 2010, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 9589 (232-0001),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7213, Manufacturing Origin: Switzerland Net Weight: approx. 2550 kg Customs Tariff: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-Axis Machine – Standard Version 10 axes, 6 spindles: Axes and Spindle Designation - 1 sliding headstock: Z1, S1 - 2 independent vertical gang tools: X1Y1, S6 – X2Y2, S2 - 1 combined unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent counter-operation rotating axis: X4, S5 Bar feed position: right side of operator Machine axis height: 1100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Csdpfx Asw T Tcwoa Ssgn Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: - Guide bush machining: 180 mm - Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (No. 76-201) Guide bush: fixed / rotating Guide bush collet, type: Meister 605 Number of lateral tool stations, combined: - Fixed: 2 x 5 - Rotating: 3 + 3 Number of frontal tool stations, combined: - Fixed: 4 - Rotating: 3 Number of rear tool stations, combined: - Fixed: 3 + 3 - Rotating: 3 + 3 Tool section: 12x12 mm Standard rotating tool holder: ESX 20 Bar feeder: yes Part catcher: yes All technical data is provided without guarantee and subject to change and/or errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Fanuc 31i, rotary guide bushing, parts catcher, parts conveyor, parts ejector, coolant tank, Robobar SBF-532 bar feeder, max. bar length 3600 mm Country of Manufacture: Japan Voltage: 400V Net weight: 3000 kg External dimensions: 240 x 138 x 205 cm Customs tariff number: 8458.11 20 TECHNICAL DATA Number of axes: 8 Number of spindles: 2 Control: Fanuc 31i Main spindle Max. bar diameter: 25.4 mm Cedpod Hihyefx Aa Sogn Travel: 230 mm Speed: 10,000 rpm Power: 5.5 kW C-axis indexing accuracy: 0.1° Sub spindle Max. bar diameter: 25.4 mm Speed: 10,000 rpm Power: 5.5 kW C-axis indexing accuracy: 0.1° Number of guide bushings: 2 Guide Bushing 1 Number of stations: 10 Number of driven stations: 4 Speed of driven tools: 10,000 rpm Guide Bushing 2 Number of stations: 2 Number of driven stations: 2 Speed of driven tools: 10,000 rpm Back-working unit Number of stations: 4 Secondary operation Number of stations: 2 Electrical connection: 400V Total power: 14 kW All technical details are provided without obligation and subject to error or omission. Inventory No. 2180201, Machine consisting of: Fanuc 31i CNC control Rotary guide bushing Parts catcher Parts conveyor Parts ejector Coolant tank Bar feeder Robobar SBF-532, max. bar length 3600 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2410, Year 2001 with Fanuc Deco and 10 axes Fully checked and partially overhauled as per report. Country of manufacture: Switzerland Cedpfx Aaow T Tfrj Sogn Net weight: 1,500 kg Customs tariff number: 8458.11 20 Dimensions: 1650 x 1050 x 1850 mm TECHNICAL SPECIFICATIONS (standard version) Headstock (Z1 axis) (+C axis optional) Maximum bar capacity: ø 10 mm Maximum part length, depending on collet type: 60/90 mm Programmable spindle speed: 0–16,000 rpm Positioned and indexed stop, increment: 0.1° Maximum spindle power: 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of turret tools (2 slides; 2 x 2 axes): 2 x 4 Tool section: 8 x 8 mm Number of cross drilling/milling tools: 4 Programmable rotation speed: 0–12,000 rpm Front working device (X3/Y3) Maximum number of front tools: 3 Programmable rotation speed: 0–12,000 rpm Sub-spindle and secondary operations (X4/Z4) (+C optional) Maximum clamping capacity: 7 mm Programmable rotation speed: 0–16,000 rpm Positioned and indexed stop; increment: 0.1° Maximum number of secondary operations: 4 Number of fixed or live spindles: 4 Maximum spindle rotation speed: 9,000 rpm Tornos-Bechler/Fanuc dedicated CNC Type of processor: 486 DX2 Number of simultaneous axes: 10 Machine versions: 9 axes + C axis on main spindle and/or C axis on sub-spindle All technical data provided without guarantee of accuracy or completeness.