CNC večvretenska avtomatska stružnica

TORNOS MULTISWISS 6X14

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 16.432 h, Funkcionalnost: popolnoma funkcionalen, 𝗦𝘁𝗮𝗿 𝗦𝗥20 𝗝, tip 𝗖 Letnik izdelave: 2015 Djdpfezmw Dkjx Apwewc Delovnih ur: 16.432 ur Rezervoar za olje Napajalnik palic Iemca Tekoči transporter za obdelovance Krmilnik Fanuc Command 31i, model B

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, STAR SR20J II, TIP A Letnik izdelave 2023 CNC-krmilnik Fanuc, model 32i B Največja kapaciteta za obdelavo palic: 20 mm Opremljen z osjo Y in osjo C Dwodpfx Aezqdukjpwsc Pogon za orodja Napajalnik palic ALPPS TOOL CO ASR X-20ASII Transportni sistem za odrezke LNS Izjemno nizko število delovnih ur Od trenutka proizvodnje se je uporabljal izključno za obdelavo medenine Izbira orodij in potrošnega materiala je vključena v dobavo Stroj je na voljo od konca septembra 2026.

Stanje: dober (rabljeno), Leto izdelave: 1995, Description Control: Sinumerik 810M Spindle speed: 5,000 rpm Turret head: 12-position Table clamping area: Length 850 mm, Width 325 mm Very good condition, regularly maintained. Operating manual in German Number of axes: 3 (X, Y, Z) Travel X: 420 mm, Y: 330 mm, Z: 240 mm Control: Sinumerik 810M Max. spindle speed: 5,000 rpm Dedpfovt Amusx Apwewc Automatic tool changer for 12 tools Tool holder: SK40 Coolant system

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: Dedeuiy Ngopfx Apwowc - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.500 mm, skupna dolžina: 4.500 mm, skupna višina: 3.200 mm, Offered is a double-spindle pick-up lathe EMAG VSC 250 DUO. There are 2 almost identical machines of this type available. Each machine is equipped with 2 independent work spindles and 2 EMAG turrets. The machine is capable of either machining 2 identical workpieces with the same operation simultaneously, or producing one workpiece in two consecutive machining steps. The VSC 250 DUO will be completely overhauled before delivery and will receive a control system upgrade to Siemens Sinumerik ONE. If required, the machine can be equipped with further peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL Siemens Sinumerik One TECHNICAL DATA Workpiece diameter: max. 250 mm Workpiece height: max. 150 mm Chuck diameter: 250/315 mm Swing diameter: 350 mm X-axis travel: 745 mm Z-axis travel: 300 mm Dodpfx Aer Nc Ufepwjwc TOOL CARRIERS Work area 1: 1x EMAG disc turret, 12x VDI 50 stations, no driven tools Work area 2: 1x EMAG disc turret, 12x VDI 50 stations, with driven tools Price, delivery time, and machine configuration upon request.

Stanje: novo, Leto izdelave: 2025, Manual operation with our ultrasonic cleaning technology, featuring an analogue control panel and temperature regulation via a digital thermostat. PRO-series functions can optionally be added. We offer tank capacities from 60 to 7,500 L to meet all requirements. Tank capacity: 110 L Dwodpfx Asf Hqavspwsc External dimensions: 1970 x 670 x 970 mm Usable basket dimensions: 550 x 350 x 250 mm Ultrasonic frequency: 40 kHz Ultrasonic power: 1,000 W

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7213, Manufacturing Origin: Switzerland Net Weight: approx. 2550 kg Customs Tariff: 8458.11 20 Dwsdpow T Tcwsfx Apwec Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-Axis Machine – Standard Version 10 axes, 6 spindles: Axes and Spindle Designation - 1 sliding headstock: Z1, S1 - 2 independent vertical gang tools: X1Y1, S6 – X2Y2, S2 - 1 combined unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent counter-operation rotating axis: X4, S5 Bar feed position: right side of operator Machine axis height: 1100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: - Guide bush machining: 180 mm - Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (No. 76-201) Guide bush: fixed / rotating Guide bush collet, type: Meister 605 Number of lateral tool stations, combined: - Fixed: 2 x 5 - Rotating: 3 + 3 Number of frontal tool stations, combined: - Fixed: 4 - Rotating: 3 Number of rear tool stations, combined: - Fixed: 3 + 3 - Rotating: 3 + 3 Tool section: 12x12 mm Standard rotating tool holder: ESX 20 Bar feeder: yes Part catcher: yes All technical data is provided without guarantee and subject to change and/or errors.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Splošno Krmiljenje: SIEMENS 840 D Glavno vreteno Premer palice: 60 mm Število vrtljajev: 6000 vrt/min Moč: 29 kW Navor: 140 Nm Sinhronsko vreteno Tehnologija: Nameščeno na revolver Vpenjanje: Kleščni vpenjalni sistem D=42 mm Največje število vrtljajev: 4.500 vrt/min Revolver 1 (X/Z) Tehnologija: Orodni revolver z 8 postajami Orodni nosilec: Za DIN 69880 - 25x48 mm Maksimalno število vrtljajev: 6.000 vrt/min Moč: 3,3 kW Maksimalni navor: 7,5 Nm X-os: 90 mm Dedpfx Apjzgcp Sowowc Z-os: 280 mm Revolver 2 (X/Z) Tehnologija: Orodni revolver s 6 postajami Orodni nosilec: Simetrično lastovičjerepasto vpenjanje Vrtljaji: 4.500 vrt/min Moč: 4,2 kW Navor: 7,5 Nm X-os: 81 mm Z-os: 80 mm Oprema Upravljanje odrezkov: Transportni trak s tečaji za odrezke Upravljanje hladilne tekočine: Črpalka za hladilno tekočino 8 bar Odvod obdelovancev: Naprava za prevzem obdelovancev Podajalnik palic: Magacin za palice LM 3200 Izmetnik: Na sinhronskem vretenu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: X axis: 250 mm Y axis: 200 mm Z axis: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3,700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – B Axis Angular travel: -15° to +100° Angular travel (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Max. speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Continuous power (100% ED): 10 kW Power at 25% ED: 15 kW Rated torque (100%): 8 Nm Rated torque (25%): 12 Nm Speed range: 50 – 30,000 rpm A Axis (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Dedpfx Apswv Hnmjwowc Max. spindle speed: 35 rpm Drive torque: Nominal: 112 Nm Maximum: 238 Nm Resolution: 0.0001° Axis clamping (A axis) pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Disc rotation speed: 60 rpm Max. tool diameter (adjacent positions filled): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Pick-off Slide Travel: 80 mm Feed force: 1,700 N Tilting torque: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting: 100 bar Workpiece Manipulator Pneumatic vertical sliding shutter: Ø: 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1,120 mm (2×560 mm) Max. vertical stroke: 150 mm Part pick-up Ø / length: Ø 32 mm / 100 mm Part ejection Ø / length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic equipment Operating pressure: 6 bar Hydraulic system Operating pressure: 95 – 105 bar Coolant system Coolant tank volume: 80 litres Chip tray volume: 30 litres Operating kinematic viscosity: 10 – 15 cSt SCOPE OF DELIVERY Including (not an exhaustive list): Willemin Macodel W 408 B machining centre Extraction/filtration unit Fire extinguishing system Probe Coolant system Oil chiller Data backup Complete operation documentation Exact scope of delivery as per photo series No guarantee is given for the correctness, completeness, or currency of the information provided.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 30.000 mm, skupna višina: 4.300 mm, skupna širina: 6.500 mm, teža obdelovanca (maks.): 100 kg, temperatura: 220 °C, ogrevalna zmogljivost: 80 kW (108,77 KM), višina obdelovanca (maks.): 1.200 mm, dolžina obdelovanca (maks.): 2.500 mm, izolacijski material: Mineralwolle 75 kg/m³, debelina izolacije: 150 mm, širina obdelovanca (maks.): 800 mm, Oprema: osvetlitev, Popolnoma avtomatska linija za nanašanje praškovih premazov (tekoči transport, predobdelava, nanašanje s sistemom Wagner, peči) Prodaja se profesionalna, popolnoma avtomatska linija za nanašanje praškovih premazov, zasnovana kot tekoča linija (ciklični sistem) podjetja Klaus Benecke. Linija je idealna za učinkovito nanašanje premazov na aluminijaste komponente in druge kovinske izdelke. Individualna prilagoditev linije je možna po dogovoru! Glavne značilnosti in ključne komponente: - Kemijska predobdelava: 2-stopenjska brizgalna komora (D=3.600 mm, Š=1.500 mm, V=2.250 mm), vključno z razmaščevanjem/fosfatiranjem in izpiralnim območjem s brizgalno rameno. - Sušilnik za predhodni premaz: tekoča peč do 120 °C s 40 kW gorilnikom za utekočinjeni naftni plin (Riello). (možna druga vrsta oskrbe z energijo) - Kabina za nanašanje praškovih premazov PVC 3.600: antistatična plastična kabina z monociklonom (sesalna moč 12.000 m³/h) in dodatnim filtrom. - Wagner Premium sistem za nanašanje: 2 dvižna mehanizma, 6 avtomatskih pištol PEA-C4, 2 ročni pištoli in krmilnik, zasnovan za do 10 pištol. - Peč za strjevanje: tekoča peč do 220 °C s 80 kW gorilnikom za utekočinjeni naftni plin (Riello). (možna druga vrsta oskrbe z energijo) - Transportni sistem: Cardin verižni transporter C-100 v cikličnem načinu (50 m transportne poti, 54 m verige). - Krmilnik: sodoben PLC krmilnik z 7-palčnim barvnim zaslonom (Easy View), pretvornikom in modemom za oddaljeno vzdrževanje. Tehnični podatki: - Vrsta linije: linija za nanašanje praškovih premazov (tekoči / ciklični sistem) - Največje dimenzije obdelovancev: (D x Š x V) 2.500 x 800 x 1.200 [mm] - Največja obremenitev na nosilec: 100 kg/prečka - Ocena proizvodne zmogljivosti: pribl. 50 m²/h (oba strani) - Material: aluminij / kovinski deli - Transportni trak: veriga Cardin C-100 (50 m) - Moč gorilnika: sušilnik / peč 40 kW / 80 kW (utekočinjeni naftni plin ali drug vir energije na zahtevo) - Krmilnik: PLC s 7-palčnim zaslonom na dotik - Stanje: nova linija / projekt Komponente v obsegu dobave: - Kemijska predobdelava (2-stopenjska brizgalna komora) - Sušilnik za predhodni premaz - Sistem za nanašanje praškovih premazov (PCB 3.600) - Wagner sistem za nanašanje - Peč za strjevanje praškovih premazov - Transportni sistem - Električni krmilnik - Storitve in dodatna oprema Dodpfxeum Uflo Apwewc