Tla Tiska nakup rabljenega (7.004)

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0319, Pressure: 125 t Passage width: 1000 mm Stroke: 500 mm Machine weight approx. (without operating fluids): 6 t Dimensions (L x W x H): 2540 x 933 x 3000 mm Retracting force: 12 t Max. working height: 700 mm Return speed: 25 mm/sec Njdpefxykpjfx Abbscl Ram plate: 600 x 1300 mm Table plate: 600 x 1300 mm Table height above floor approx.: 850 mm Oil cooling (electric): 1.5 kW (max) Motor power: 11 kW Approach speed: 10 mm/sec Pressing phase speed: 10 mm/sec Oil tank: 250 l Rapid traverse speed: 10 mm/sec Column diameter: 120 mm Operating principle of the tool testing press: 1. The main switch is activated by turning. 2. Then, the press lighting should be switched on. 3. The tool is placed into the pressure center of the press. If the tool requires greater force off-center (e.g., with combination tools where the first station punches thick sheets while subsequent stations only carry out fine work), it may be necessary to shift the tool slightly to the left or right so that the counterforce from the material acts as centrally as possible on the ram. 4. The lower tool is bolted to the press table, and the upper tool is then lowered. 5. To do this, switch on the pump at the control cabinet. The fall protection then releases the ram. 6. A slow pull on the control lever starts the downward movement. The more you pull, the faster the press operates. For safety reasons, the maximum downward speed is limited to 10 mm/sec. 7. The pressing force is set via a rotary knob, located to the right near the manual control lever. 8. After the ram reaches the upper tool, it is attached to the ram. 9. Any transport locks are removed if present, then the press is opened by pressing the manual lever. The speed of the upward movement can be continuously adjusted from 0 to 25 mm/sec using the manual lever.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0325, Pressure: 40 t Passage width: 1000 mm Stroke: 400 mm Approx. machine weight (without operating fluids): 3.5 t Dimensions (L x W x H): 2065 x 700 x 2905 mm Retracting force: 4 t Max. working height: 700 mm Return speed: 25 mm/sec Ram plate: 1320 x 600 mm Table plate: 1320 x 600 mm Table height above floor approx.: 750 mm Oil cooling (electric): 1.5 kW (max) Motor power: 8 kW Feed speed: 10 mm/sec Pressing speed: 10 mm/sec Oil tank: 200 l Nodpfx Asfxykwebbjcl Rapid traverse speed: 10 mm/sec Column diameter: 100 mm Hydraulics and tank mounted on top of the press: 2400 ? All-round maintenance platform: 3600 ? Siemens S7 1200: 4600 ? Drip tray made of painted steel: 850

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0199 - Rev.00, Pressure: 160 t Passage width: 1200 mm Stroke: 600 mm Machine weight approx. (without operating materials): 7 t Dimensions (L x W x H): approx. 2400 x 1400 x 3400 mm Return force: 16 t Max. working height: 800 mm Return speed: 25 mm/sec Ram plate: 1670 x 800 mm Table plate: 1670 x 800 mm Table height above floor approx.: 800 mm Oil cooling (electric): 1.5 kW (max) Motor power: 18 kW Advance speed: 10 mm/sec Pressing speed: 10 mm/sec Travel distance: 600 mm Ncedpfxjdxvfhj Abbel Oil tank: 300 l

Stanje: dober (rabljeno), Reinigungsmaschine zu verkaufen – Tennant 7200 Die Maschine stammt aus dem Jahr 2004, ist aktuell außer Betrieb, funktioniert jedoch einwandfrei. Theoretische Flächenleistung: 7.000 m²/Stunde. Die Maschine wurde regelmäßig von Tenrom Hungary sowie von unserem eigenen Servicetechniker gewartet. Betriebsstunden: 2.119. Ausgestattet mit einer 36 V-Stahlplattenbatterie von Hoppecke (Gabelstaplertyp, Kaufjahr 2019), die bislang ca. 1.000 Betriebsstunden geleistet hat. Zum Lieferumfang gehören ein PED-Halter sowie ein Banner Intelligent-Ladegerät. Versand kann nicht organisiert werden. Ncjdpfx Asw E H S Rsbbol

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0163, Pressure: 800 t Clear width between uprights: 1200 mm Stroke: 500 mm Total power requirement: 85 kW Approx. machine weight: 40 t Dimensions L x W x H: 4100 x 3500 x 6650 mm Return force: 80 t Main cylinder: 1 piece Column diameter: 250 mm Installation height (distance between bolster and ram plate with cylinder fully retracted): 1000 mm Table size: 1300 x 1100 mm Ram area: 1300 x 1100 mm Njdpfx Ajdxvfpsbbscl Ram height: 800 mm Table height above floor approx.: 950 mm Max. table load: 5 t Approach speed: 250 mm/sec Return speed: 150 mm/sec Oil tank: 1000 l Working speed at start: 10 mm/sec Hydraulics and tank mounted on top of press: included? All-round maintenance balcony: included? Side panels: included? Light barriers front and rear: included? Right side monitored door: included (800 x 530 mm)? Left side monitored door: included (800 x 530 mm)? Electrical oil cooling and thermal insulation for ram and table by a 30 mm thick insulation plate Table deflection according to DIN max. 0.2 mm Ejector force: 150 t Ejector stroke: 200 mm Ejector speed: 70 mm/sec

Stanje: rabljeno, Táto nabídka je pro 1 z 2 kusů podlahové centrifugy Thermo Scientific Sorvall RC12BP+. Sorvall RC 12BP Plus Centrifuge systém specifikace: Specifikace centrifugy Maximální rychlost: 4 700 ot./min Maximální RCF: 7 340 xg Maximální kapacita: 12 l, 6 x 2 000 ml Nalgene Bio-láhve, 12 x 500 ml čtyřnásobné krevní vaky Pohon: vysokovýkonný indukční Detektor nevyváženosti: tolerance 50 g Profily zrychlení/zpomalení: 11 Provozní čas: 1 min – 99 min 59 sek., možnost nepřetržitého provozu Rozsah regulace teploty: -10 až +40 °C Rozměry (V x Š x H): 1178 x 800 x 905 mm Hmotnost: 470 kg Řízení: mikroprocesor Programovatelnost: 15 programů Funkce: software Centri-Log pro sledování, ACE, krokový režim, pomalý rozjezd/doběh Bezpečnostní prvky: automatický zámek víka, detekce nevyváženosti, pancéřovaný ochranný prstenec, bezpečnostní klíčový spínač Ncsdpfx Aoxzgr Tebbol

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, Pressure: 110 t Ncsdpfxofhcc Te Abbol Passage width: 1500 mm Stroke: 650 mm Total power requirement: 15 kW Approx. machine weight: 11 t Dimensions L x W x H: approx. 2640 x 3200 x 3650 mm Return force: 11 t Column diameter: 120 mm Max. working height: 1000 mm Table size: 1990 x 1000 mm Ram size: 1990 x 1000 mm Ram travel: 650 mm Table height above floor: approx. 800 mm Approach speed: 10 mm/sec Pressing speed: 10 mm/sec Oil tank: 200 l Oil cooling (electric): 1.5 kW (max)

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, delovna širina: 750 mm, skupna masa: 460 kg, trajanje garancije: 24 meseci, kapaciteta rezervoarja: 90 l, kapaciteta rezervoarja za vodo: 90 l, napetost baterije: 24 V, raven hrupa: 69 dB, We offer for sale a New Scrubber-Dryer Machine with Seat B 90 R Classic Bp, equipped with a D75 disc head. All devices purchased from us come with a 24-month WARRANTY. Technical Specifications: • Drive type: Battery powered • Traction drive: Traction motor • Brush working width: 750 mm • Working width / suction: 940 mm • Water tank capacity: clean / dirty 90 / 90 l • Battery voltage: 24 V • Maximum battery operating time: 3.5 hours • Brush pressure: 20 – 315 / 28 – 37 g/cm² / kg • Water consumption: 3.5 l/min • Sound pressure level: 69 dB(A) • Rated power: 2200 W Ncodpfjwz Nz Tex Abbjl • Permissible total weight: 460 kg • Dimensions (L x W x H): 1450 x 800 x 1200 mm Equipment: • Gel batteries 6V 180Ah x4 • Suction bar with squeegee • Red disc brush x2 • Battery charger A working width of 750 mm ensures high productivity and effective cleaning of large surfaces in less time. The control panel is clear and easy to use, making daily work with the machine intuitive even for new operators. A 90-litre tank enables filling with a large amount of cleaning solution at once, minimising the need for frequent refills. Thanks to its compact design, the device features excellent maneuverability – the small turning radius allows for efficient operation even in narrow corridors and tight spaces.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, širina mize: 620 mm, dolžina mize: 750 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Rok plačila za stroj je 20.11.2025! Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu med 01.12.2025 in 05.12.2025! TEHNIČNI PODATKI Prostornina: 180 l Tlačna sila: 100 kg Dimenzije mize: 750 x 620 mm PODROBNOSTI STROJA Ncjdpexniw Eefx Abbel Priključna moč: 7,5 kW Dimenzije in teža Dimenzije (D x Š x V): 1.500 x 1.200 x 2.900 mm Teža: 4.250 kg

Stanje: dober (rabljeno), Obel Pedersen High-Frequency Throughfeed Belt Press Ncjdpjdybr Refx Abbjl Opel-Pedersen Press Type 2412 Pressing length: 2,500 mm, width: 600 mm with glue application system, lay-up table, HF generator T20 V and water cooling The system has been dismantled.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HU50610, 15" touchscreen control with Windows operating system Table dimensions: 630 x 360 mm Nedpfx Aowktkkjbbecl Tank dimensions (LxWxH): 940 x 550 x 350 mm X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Table and clamping device size: 100 ~ 400 mm Max. electrode weight: 11/50 kg Max. workpiece weight: 500 kg Max. output current: 50 A Best surface finish after machining: 0.08 Ra Input power: 10 kVA Dielectric water capacity: 300 L Machine dimensions (LxWxH): 1320 x 1380 x 2150 mm Weight: 1450 kg Accessories, equipment: - Number of filters: 3 pcs. - C-axis (load capacity 11 kg) - Dielectric unit - Machine leveling feet - Documentation - Hand tools

Stanje: rabljeno, System: Used chamber filter press Design: Side-beam guided Filter plate size: 400x400 mm Number of chambers: 30 Cake thickness: 25 mm Filter plates: Polypropylene (PP) Filter cloths: Optionally available, tailored to the specific medium Discharge: Open Open filtration area: approx. 7.5 m² Press capacity: approx. 90 dm³ Plate pack length: approx. 1,512 mm Filtration pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10°C / max. 50°C Plate shifting: Manual Hydraulic pump: Optional Motor voltage: 380 V Control voltage: 230 V – 24 V Accessories: Optional, according to customer requirements and machine type Ncjdpsb E A Efjfx Abbol Safety devices: Optional Special accessories: Optional, depending on configuration Upgrades: Possible in consultation, depending on machine type Special services: Refurbishment service available upon request. Each unit undergoes a service check or general overhaul before delivery. Up to 12 months warranty provided for these units. Condition: The system is immediately operational. Purchase or rental: Inspections of the systems are possible by appointment at our premises.

Stanje: novo, Hydraulic Cylinder Replacement Cylinder Chamber Filter Press We supply hydraulic cylinders as spare parts for your chamber filter press, suitable for all manufacturers and formats. Ncedpfsd Hgadex Abbel

Stanje: rabljeno, System: Chamber filter press, pre-owned Application area: Chamber filter press, pilot plant Design: Side-bar guided Filter plate size: 400 x 400 mm Number of plates: 15 Filter plates: PP (polypropylene) Cake thickness: 25 mm Filter cloths: Available as an option, matched to the specific medium Discharge: Open Filtration area: approx. 3.0 m² Press volume: approx. 37 dm³ Plate package length: approx. 700 mm Filtration pressure: approx. 15 bar Plate shifting: Manual Pump technology: Optional Nsdpeb E I T Sjfx Abbocl Purchase or rental: Inspection of the systems at our facility can be arranged by appointment. Would you like to rent or purchase this unit? Please contact us—we are happy to assist you.

Leto izdelave: 2014, Stanje: novo, številka stroja/vozila: RE-HU-2014-1603-1, System: Chamber filter press, demonstration model – as new Operating hours: None Njdpfx Abeb Dluwobocl Application areas: Chamber filter press, laboratory press, pilot plant, wine press Design: Side-beam guided Filter plate size: 250 x 250 mm Number of plates: 8 Filter plates: PP (polypropylene) Cake thickness: 25 mm Filter cloths: Available optionally, customized to medium Discharge: Open Filter area: approx. 0.56 m² Pressing volume: approx. 7 dm³ Plate bundle length: approx. 379.2 mm Filtration pressure: approx. 15 bar Plate shifting: Manual Product-contact parts: PP & stainless steel Dimensions (L x W x H): approx. 960 x 400 x 360 mm Weight: 350 kg (photo shows identical machine) Pump system: Optional Purchase or rental: Machine inspections available by appointment at our facility. Note: Several units available. Please pre-order due to high demand. Are you interested in renting or purchasing this machine? Please contact us – we are happy to assist.

Stanje: novo, Hydraulic cylinder replacement cylinder Chamber filter press Ncodpfsd Hf Uwjx Abbel We supply hydraulic cylinders as spare parts for your chamber filter press, suitable for all manufacturers and formats.

Leto izdelave: 2014, Stanje: novo, številka stroja/vozila: RE-HU-2014-1603-2, System: Chamber Filter Press – as new, demonstration model Operating hours: None Application area: Chamber filter press, pilot plant, wine press Design: Side-bar guided Filter plate size: 390x390 mm Number of plates: 14 Nedpfsb Dluyex Abbecl Filter plates: Polypropylene (PP) Cake thickness: 25 mm Filter cloths: Available optionally, tailored to the medium Filtrate discharge: Open Filter area: Approx. 2.8 m² Chamber volume: Approx. 35 dm³ Plate stack length: Approx. 391 mm Filtration pressure: Approx. 15 bar Plate shifting: Manual Frame: Steel Product-contact parts: Polypropylene (PP) + stainless steel Dimensions (LxWxH): Approx. 1695x750x630 mm Weight: 610 kg (photo shows identical system) Pump technology: Optional Purchase or rental: Inspection of the systems can be arranged at our facilities by appointment. Additional: Several units available. Please order in advance due to high demand.

Leto izdelave: 1999, Stanje: dober (rabljeno), We are selling the membrane press for kitchen doors or door frames, etc. Manufacturer: Italpresse, Model: Form Air. Year of manufacture: 1999. Nedsd Ew Tbopfx Abbscl Working area: 2330 x 780 mm. Inspection possible. Complete documentation included.

Stanje: rabljeno, številka stroja/vozila: 404, lastna masa: 9.300 kg, največja dovoljena obremenitev: 25.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2011, dolžina tovornega prostora: 13.530 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.680 mm, prostornina tovornega prostora: 88 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, Oprema: ABS, * Colour: RAL 9006 White Aluminium * Disc brakes * EBS (Electronic Braking System) * Wheelbase: 1,310 mm * SAF axles * Alcoa aluminium rims Ncedelf Eu Uepfx Abbjl * Lifting and lowering device * Sliding tarpaulin * Platform * Lashing rings Subject to errors and alterations

Stanje: rabljeno, Pressione: 600 TON Punti di pressione: n°2 Ncjdpfxsq N Etts Abbol Modello: AF 600 MB 30-60 Anno di costruzione: 1994 Dimensioni piano di lavoro: 3.000 x 1.600 mm Dimensioni slitta: 3.000 x 1.600 mm Luce frontale: 3.000 mm Luce laterale: 1.200 mm Regolazione slitta: 150 mm Colpi al minuto: 20 c/min Corsa: 500 mm Apertura stampo a PMI: 1.118 mm Potenza motore principale: 30 kW Sistema di sicurezza idraulica: presente Peso: 110 ton

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Z293-068, skupna masa: 32.000 kg, širina mize: 1.500 mm, dolžina mize: 2.500 mm, stiskalna sila: 407 t, vrsta upravljanja: CNC krmiljenje, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Rok plačila za stroj je 20.11.2025! Ponudba velja kot zaveza za prevzem med 01.12.2025 in 05.12.2025! TEHNIČNI PODATKI Širina mize: 1.500 mm Dolžina mize: 2.500 mm Hidravlični tlak: 320 bar Nazivna sila: 2 x 2.000 kN PODATKI O STROJU Električni podatki Obratovalna napetost: 400 V Frekvenca: 50 Hz Krmilna napetost: 230 V Ncsdpjxm R S Isfx Abbjl Priključek: 42 kW Nazivni tok: 100 A Dimenzije in teža Dimenzije: 5.000 x 4.000 x 3.800 mm Teža: 32.000 kg OPREMA CNC krmiljenje Hladilna naprava Filtrirna odsesava HILMA izhod konzol (1.600 mm)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, barva: sivo-črna, skupna masa: 16.000 kg, največja dovoljena obremenitev: 14.300 kg, lastna masa: 1.700 kg, prostornina tovornega prostora: 9 m³, širina tovornega prostora: 2.350 mm, dolžina tovornega prostora: 5.000 mm, višina nakladalnega prostora: 800 mm, Dear Sir or Madam, We are offering a brand new 9m³ roll-off container, manufactured in-house, for sale. The container features the following specifications: - Manufactured to DIN 30722 standards - Lifting bracket diameter: 60mm - Hook height: 1570mm - Internal length: 5,000mm - Internal width: approx. 2,350mm Nodpfx Aexugkpjbbecl - Internal height: 800mm - Floor made of 5mm S-355 steel sheet - Side walls, front wall & rear doors made of 3mm S-235 steel - Continuous welding of sheets and profiles - Side stiffener spacing: 400mm - Floor stiffeners every 400mm - 8x completely hidden 5t lashing eyes recessed in the floor - 2x 5.3t lashing rings on the inside of the front wall - Upper frame: round tube, 89mm diameter - Continuous net hooks around the perimeter - Exterior rollers: greaseable and replaceable - Warning markings according to §32 (1) StVO & DIN 67520 - Gross weight: 16,000kg - Unladen weight: approx. 1,700kg - Payload: approx. 14,300kg - Complete epoxy primer - 2-component coating in RAL 7016 anthracite - Rear portal doors including central locking & additional lock in accordance with UVV - Including nameplate & container inspection according to DGUV Rule 114-010 (formerly BGR 186) - Immediately available - Unit price: €4,300.00 plus VAT Nationwide delivery available for an additional charge. If you are interested in other roll-off container products, please feel free to contact us as well.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Hydraulic Horizontal Straightening and Bending Press - Manufacturer: ZOPF - Model: T500 with 1500 mm long straightening beam - Press force: 50 tons - Semi-automatic control system (99 programs, each with up to 16 steps) - Includes bending pins (without punch) - Includes tool holder for dies and foot pedal - Infinitely variable stroke adjustment: 0–300 mm Nsdpfx Ajdk H A Ijbbocl - Adjustable working speed Working stroke max. 10 mm/sec. Return stroke: 20 mm/sec. - Adjustable hydraulic pressure - Maximum tool height: 300 mm - Motor power: 5.5 kW - 400 Volt, 50 Hz, 3 phase - Working height: 900 mm - Enclosed table - Interchangeable wear plate - Weight: 1300 kg - Bending capacities: Flat material: 300 x 15 mm Flat on edge: 60 x 15 mm Round tube: 3/8"–2 1/2"

Stanje: rabljeno, Leto izdelave: 1998, številka stroja/vozila: 101486, Vertical Press Delivery Heidelberg VSA-66.D+MK, Year 1998 – Serial-No. 101486/98-256505 Working width max. 660 mm Marking Device included Online video inspection via Skype video available Ncedpfeh Ayfwjx Abbol We would be very pleased to welcome you for an inspection – more machines available in stock Available immediately – can be inspected Located in Emskirchen/Nuremberg – Test runs possible

Stanje: rabljeno, Leto izdelave: 2010, številka stroja/vozila: 1,04197E+11, Vertical press delivery MBO FA 82-ME Navigator Year of manufacture: 2010 - Serial No. 104197100101 Working width max.: 820 mm Nedpfx Ajt E Ntuebbecl with integrated press rollers with ME marking device Navigator control Online video inspection via Skype We would be pleased to welcome your visit – more machines available in stock Available immediately – can be inspected In stock in Emskirchen / Nuremberg – testing possible