Tla Tlakovci nakup rabljenega (2.437)

Leto izdelave: 2000, obratovalne ure: 12.470 h, stanje: rabljeno, Empty weight: 65,000 kg Please contact Emal Jaweed for further information. Kjdpfx Alox R Twwo Nedk Wirtgen SP 1500 L Slipform Paver / Concrete paver, Year of manufacture: 2000, Operating hours: 12,470 h, Length: 16,850 mm, Width: 3,600 mm, Height: 3,100 mm, Weight: 60,520 kg, Engine power: 287 kW, CAT genset, Working depth / Layer thickness: 0–450 mm, Paving height: 400 mm, Working width: 5,000–15,250 mm, Max. mould width: 15,250 mm, Travel speed: up to 25 m/min, DBI system (curb setting device), good working condition, We can offer dismantling and re-assembly of the machine on site. Video available Other information: * We offer over 200 machines for sale. * Our location: 30 km north of Frankfurt/M Airport. * Financing & leasing available. * Specialist in worldwide transport & shipping. * No liability for printing or typographical errors. * Subject to prior sale and errors. * Trade-in possible! * Only the general terms and conditions (GTC) of Jaweed GmbH shall apply to the purchase of vehicles/used machines. * You can find more information and our general terms and conditions on our website. We are selling our goods with general terms and conditions (listed: ... / GTC).

Stanje: rabljeno, številka stroja/vozila: 121, lastna masa: 8.060 kg, največja dovoljena obremenitev: 30.940 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2019, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.800 mm, prostornina tovornega prostora: 94 m³, vzmetenje: zrak, velikost pnevmatike: 385/55 r22,5, barva: črn, Oprema: ABS, EBS (Electronic Braking System) Disc brakes Wheelbase 1,310 mm Ksdpfxsng E Ute Al Njdk SAF axles Aluminium rims Sliding tarpaulin Platform Lashing rings Lift and lowering device Subject to errors and omissions

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Workpiece & Performance Panel Formats: • Length: 1,200–1,400 mm • Width: 195 mm • Thickness: 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack formation: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Loader Vacuum gantry for raw panel feeding (fixed edge right) • Workpiece weight up to 100 kg • Output up to 5 cycles/min Kedpfx Aloywxrao Nedk • Pallet return + light barrier safety 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for loading • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Decor Alignment Station Aligns panels for decor-correct subsequent processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal division with edge trimming • Feed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT HPp11 Crosscut Station Crosscut in through-feed with pressure beam • Cutting width 2,200 mm • Pneumatic top pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Stack turner (2×8 compartments) for dissolving bundles • Conveyor speed 10–50 m/min 8. BARGSTEDT Angle Transfer (TW) 90° deflection with belt conveyors, feed up to 130 m/min For transfer into the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format machining • 6 units per side • 6.6 kW per unit • Tool Ø up to 200 mm • Joint edge color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Booth Enclosure for both HOMAG profiling machines • approx. 12,000 × 7,000 × 3,000 mm Post-Processing 12. BARGSTEDT TTK44/21/14/02 Flip Over Unit Workpiece turning in through-feed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Packing Station Automatic pack assembly with 1st/2nd grade sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Output 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Cartoning Station Folding and supply of cartons before packaging • Output up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic package marking (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrink Wrapping System Fully automatic film packaging with shrink tunnel • Connected load 36–40 kW • Output up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT TFB20/017/04 Belt Conveyor with Air Shower Cooling section after shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Cross Stacking Unit Automatic stacking onto pallets • Packages up to 1,400 × 195 × 58 mm • Output max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum cups • up to 6 cycles/min • package weights up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic empty pallet supply for final palletizing

Stanje: novo, Le forfait comprend : 01x Grille métallique, neuve Fabricant : Garantell Couleur matériau : galvanisé sendzimir Version : posé Profondeur totale : env. 1 118 mm Kjdpfx Aleyz Ir Rs Nodk Profondeur intérieure : env. 1 105 mm Profondeur des montants : env. 1 100 mm Support de traverse : env. 53 mm Portée utile : env. 998 mm Largeur : env. 1 340 mm Maille : env. 110 x 95 mm Épaisseur du fil : env. 4,00 mm Poids par pièce : env. 6,75 kg Nombre de longerons : 05 pièces Dimensions longeron : env. 998|50|1,25 mm Capacité de charge max. : 500 kg Vos interlocuteurs dans notre entreprise : M. Andre Evering M. Mario Klöver M. Falk Deutsch Informations générales sur l’article : Cet article est proposé uniquement à l’enlèvement. Pour tout souhait de transport ou d’expédition, des frais supplémentaires s’appliquent. Ceux-ci peuvent être communiqués sur demande en fonction du lieu ou du volume de livraison.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Krmiljenje: Multipulse 64 4 osi – vključno z osjo C Delovno območje: 600 x 500 x 340 mm Premik glave: 400 x 300 x 300 mm Nosilnost mize: 500 kg Kdodpfsyllaxsx Al Nsk Avtomatski menjalec elektrod za 20 elektrod Sistem za vpenjanje elektrod Erowa Dokumentacija. Stroj je trenutno še vedno v uporabi in je bil pred nekaj leti generalno obnovljen. Dielektrični hladilnik stroja je priključen na centralni hladilni sistem.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, delovna širina: 750 mm, skupna masa: 460 kg, trajanje garancije: 24 meseci, kapaciteta rezervoarja: 90 l, kapaciteta rezervoarja za vodo: 90 l, napetost baterije: 24 V, raven hrupa: 69 dB, We offer for sale a New Scrubber-Dryer Machine with Seat B 90 R Classic Bp, equipped with a D75 disc head. All devices purchased from us come with a 24-month WARRANTY. Technical Specifications: • Drive type: Battery powered • Traction drive: Traction motor • Brush working width: 750 mm • Working width / suction: 940 mm • Water tank capacity: clean / dirty 90 / 90 l • Battery voltage: 24 V • Maximum battery operating time: 3.5 hours • Brush pressure: 20 – 315 / 28 – 37 g/cm² / kg • Water consumption: 3.5 l/min • Sound pressure level: 69 dB(A) • Rated power: 2200 W • Permissible total weight: 460 kg Kedpfx Alewz Nz To Nsdk • Dimensions (L x W x H): 1450 x 800 x 1200 mm Equipment: • Gel batteries 6V 180Ah x4 • Suction bar with squeegee • Red disc brush x2 • Battery charger A working width of 750 mm ensures high productivity and effective cleaning of large surfaces in less time. The control panel is clear and easy to use, making daily work with the machine intuitive even for new operators. A 90-litre tank enables filling with a large amount of cleaning solution at once, minimising the need for frequent refills. Thanks to its compact design, the device features excellent maneuverability – the small turning radius allows for efficient operation even in narrow corridors and tight spaces.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 10/2014, barva: drugo, Leto izdelave: 2014, Lastna teža: 7.600 kg Os 1: leva 2 mm, desna 6 mm Kodjy Aw N Iopfx Al Nodk Os 2: leva 8 mm, desna 8 mm Os 3: leva 6 mm, desna 8 mm

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Velikost mize: 600 x 400 mm Kedpsyity Ujfx Al Nodk Največja velikost obdelovanca: 900 x 600 x 330 mm Največja teža obdelovanca: 750 kg Pomik X: 400 mm Pomik Y: 300 mm Pomik Z: 300 mm Moč generatorja: 60 A Dimenzije stroja: 2190 x 1880 x 2360 mm Teža stroja: 2800 kg Dodatna oprema - Magnetna miza in vpenjalni sistem EROWA - Priročnik za stroj in navodila za uporabo Stroj je v zelo dobrem stanju in izvira iz majhnega družinskega podjetja, ki je bilo nedavno razpuščeno.

Stanje: rabljeno, številka stroja/vozila: 1, lastna masa: 8.000 kg, največja dovoljena obremenitev: 30.000 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2005, naslednji pregled (TÜV): 10/2020, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.700 mm, prostornina tovornega prostora: 92 m³, vzmetenje: zrak, velikost pnevmatike: 385.65 r 22.5, barva: rdeča, Leto izdelave: 2005, Oprema: ABS, dvižna zadnja plošča, STAS 92m³ moving floor semi-trailer with 21 slats, ideal for waste transport, equipped with adjustable, sealed hydraulic tailgate and a closed roof covering 2/3 of the trailer. Features 3 disc-braked axles with steerable third axle, front platform, model year 2005, inspected until 31.10.2020. Official dealer: INTERDRIVE SRL, Parma. Kdodsh I Id Nopfx Al Njk

Stanje: rabljeno, številka stroja/vozila: 140, lastna masa: 7.700 kg, največja dovoljena obremenitev: 27.300 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2008, dolžina tovornega prostora: 13.530 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 91 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, Oprema: ABS, Colour: RAL 9006 white aluminium Kdsdpfxjp I Uz Sj Al Nsk Disc brakes EBS (Electronic Braking System) Wheelbase: 1,310 mm SAF axles Alcoa aluminium rims Lifting and lowering device Sliding roof Platform Lashing rings Subject to errors and omissions.

Stanje: novo, številka stroja/vozila: 6650f95fd39bb5625662ee336, lastna masa: 7.550 kg, največja dovoljena obremenitev: 27.450 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/55 r22.5, Further Information Chassis Semitrailer for Haulage Companies Fine-grain steel welded construction in lightweight design, reaching down to the landing legs, fifth wheel plate with replaceable 2" king pin Prepared for lashing eyes in the floor on the side (up to 13 pairs max.) 24 t two-speed landing gear, operated from one side, with straight base section, without stroke compensation Slide-out ladder at the rear Side-mounted door retainers 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection with wide Fliegl mud flap, foldable splash guard for lighting unit Quarter round mudguards Rear impact protection Aluminium ladder approx. 3,550 mm with side holder Tarpaulin support bar with bracket 1 plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, with wheel securing kit Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, operated by applying brakes 3 times (starting aid functional up to 30% axle overload and up to 25 km/h max. speed) Brake System 2-line compressed air brake system, colored piping for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without interconnection EBS, Electronic Braking System with EBS socket at front, without connection cable Note: This trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve Vehicle Stability Control System Wheels and Tires 385/55 R22.5 tyres, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without interconnection cable SB Hydraulics Hydraulic cylinder with sliding mechanism integrated in the floor. Dual-circuit hydraulics. Forward/reverse stroke selection is electric via cable remote control. Sliding floor power supply via parking light Actuation hydraulically via truck PTO Hydraulic connection with hose to front wall and HDK screw coupling NW = 48 mm Note: A dual-circuit hydraulic system is required! Recommended pump performance: Output: 110 l/min Pressure: 250 bar Oil tank capacity min.: 100 l SB Floor Sliding floor with wear plate at the rear Kdodpfx Aoi Riwxjl Nsk Floor made of 8 mm aluminium planks, ribbed design SB Body Aluminium box-type body made of high-grade, wear-resistant material. Front and side walls made of aluminum hollow profiles, circumferential upper edge welded with a wide special reinforcement profile of aluminum, lower edge welded with a special frame. Moving bulkhead for better unloading of cargo, with reinforced tarpaulin apron at the bottom With rail cleaner Rear wall made of aluminum hollow profiles, as double-leaf door, split 1/2 to 1/2, circumferentially framed with special U-profile with stop and rubber seal, with 2 external locking rods, locked top and bottom. Rear wall with mechanical security lock, operated at the rear to the left in direction of travel. With swiveling cross-beam at top. The door locks are padlockable. Standing platform with ladders on both sides (left/right in direction of travel) and railing, for opening

Stanje: novo, številka stroja/vozila: 562ca26c733cc91276e95b716, lastna masa: 6.700 kg, največja dovoljena obremenitev: 28.300 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/55 r22.5, Further Information Chassis: Tractor Unit for Haulage Fine-grain steel welded construction in lightweight design, extending to the landing legs, fifth wheel plate with replaceable 2-inch kingpin Prepared lashing rings on the floor (max. 13 pairs) 24 t two-speed landing gear, single-sided operation, with straight lower section, without push compensation Extendable ladder at the rear Kdjdpfx Aoi Riywjl Nok Side door retainers 2 wheel chocks with holders Side underrun protection made of aluminium Rear underrun protection made of steel with wide Fliegl mudflaps, foldable guard for light units Quarter-shell fenders Rear impact guard Aluminium ladder approx. 3,550 mm, with side-mounted holder Tarp pole with mounting bracket 1 plastic toolbox with drawer and shelf, dimensions: 650 mm (W) / 520 mm (H) / 670 mm (D), lockable with padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, including wheel fastening kit Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment, reducing tire wear and fuel consumption Air suspension 1st axle is an automatic lift axle, including forced lowering and start assist, activated by braking three times (start assist functional up to 30% axle overload and up to a max speed of 25 km/h) Braking System 2-line compressed air braking system. Color-coded piping for easy servicing. Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure ABS functionality! Including raise/lower valve Vehicle stability control system Wheels and Tires 385/55 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable Moving Floor (SB) Hydraulic System Hydraulic cylinder with sliding device installed in the floor. Dual-circuit hydraulics. Forward/reverse control is electric via wired remote control. Moving floor power supply via parking lights Hydraulic operation by truck PTO Hydraulic connection with hose at bulkhead and HDK screw connector NW = 48 mm Note: A dual-circuit hydraulic system is required! Recommended pump performance: Flow rate: 110 l/min Pressure: 250 bar Minimum oil tank capacity: 100 l Moving Floor Moving floor with wear plate at rear Floor boards made of aluminum, 8 mm ribbed floor profile Moving Floor Body Aluminum box body, manufactured from high-quality, wear-resistant material. Front and side walls made of aluminum hollow profiles, completely welded at the top with a wide special reinforcement profile, and at the bottom with a special frame. Sliding wall for improved unloading, with reinforced tarpaulin flaps at the bottom. With rail sweeper Rear wall made from aluminum hollow profiles, two-wing door design, split 1/2 to 1/2, fully framed with a special U-profile including stop and rubber seal, with 2 external locking bars, locked top and bottom. Rear wall equipped with mechanical safety lock, operated at the rear on the left in driving direction. With swingable crossbar at the top. Door locks are padlockable. Standing platform with ladder access on both left/right sides (in driving direction) and railing for opening

Leto izdelave: 1988, stanje: rabljeno, številka stroja/vozila: 01910/88, Eugen Laegler Floor Sanding Machine Model: Vibrafor Kodpfx Alocb Au Se Nedk Motor Power: 1.1 kW Voltage: 220 V Vibrating sanding surface Dust bag included Location: 54634 Bitburg – inspection possible

Stanje: rabljeno, številka stroja/vozila: 4/14242, Frank floor sanding machine FSR, used Motor power: 0.75 kW Voltage: 230 Volt Kedob Auu Rjpfx Al Nsdk 5 Amps, 50 Hz Machine no.: 4/14242 Dust bag Location: Ex stock Bitburg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Throughfeed sander OLIMPIA 200 with extraction unit Specifications: • Condition – used • Manufacturer – OLIMPIA • Model – 200 Kedpfx Alsvgm T So Njdk • Main motor 3.0 kW • Max working width: 200 mm • Symmetrical tables, each 24 x 55 cm • Mechanical belt tensioning and oscillation • 1 sanding unit with sanding pad • Built-in sawdust extraction system • Both tables height-adjustable • Adjustable fence, 12 x 60 cm • Extraction port – 80 mm diameter • Weight – approx. 250 kg • Overall dimensions – 125 x 75 x 95 cm (W x L x H) Additional information: • Very good, original technical and visual condition • Pictures show the actual item offered for sale • Possibility to power up and test the machine on-site • Price indicated in the listing does not include VAT

Stanje: rabljeno, številka stroja/vozila: 404, lastna masa: 9.300 kg, največja dovoljena obremenitev: 25.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2011, dolžina tovornega prostora: 13.530 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.680 mm, prostornina tovornega prostora: 88 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, Oprema: ABS, * Colour: RAL 9006 White Aluminium * Disc brakes * EBS (Electronic Braking System) * Wheelbase: 1,310 mm * SAF axles * Alcoa aluminium rims * Lifting and lowering device Kjdpfslf Eu Usx Al Njdk * Sliding tarpaulin * Platform * Lashing rings Subject to errors and alterations

Stanje: dober (rabljeno), Joint cutter, asphalt cutter, concrete cutter -without: saw blade and pull cord -saw blade: Ø 360 mm -cutting depth: 120 mm -engine: Robin EH25D, 8 HP -dimensions: 1200/500/H950 mm Kdodpfx Alsdp Dvpo Nok -weight: 100 kg

Stanje: rabljeno, Floor Cleaner, Floor Preparation Agent, Floor Coating Kedpfx Aloqyi Unj Nodk -Manufacturer: Multi Clean, Floor Cleaner/Floor Preparation Agent -Types: Ultra Brite II, Ultra Primer -Type/Quantity: see itemized photo -Price/Sale: as a complete package -Transport dimensions: 1200/800/H400 mm -Total weight: 138 kg

Stanje: novo, Leto izdelave: 2025, Extraction floor, waffle floor for mineral blasting media, approx. 7000x4200mm, without grating cover, with suction nozzle and collection boxes. For questions regarding technical specifications, etc., please contact us in writing or by telephone. Kdjdjdz Ayvopfx Al Nek The machines are based on production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the long-standing, well-known contacts.

Stanje: dober (rabljeno), Reinigungsmaschine zu verkaufen – Tennant 7200 Die Maschine stammt aus dem Jahr 2004, ist aktuell außer Betrieb, funktioniert jedoch einwandfrei. Theoretische Flächenleistung: 7.000 m²/Stunde. Die Maschine wurde regelmäßig von Tenrom Hungary sowie von unserem eigenen Servicetechniker gewartet. Betriebsstunden: 2.119. Ausgestattet mit einer 36 V-Stahlplattenbatterie von Hoppecke (Gabelstaplertyp, Kaufjahr 2019), die bislang ca. 1.000 Betriebsstunden geleistet hat. Zum Lieferumfang gehören ein PED-Halter sowie ein Banner Intelligent-Ladegerät. Versand kann nicht organisiert werden. Kdjdsw E H S Rspfx Al Nok

Leto izdelave: 2023, stanje: rabljeno, The REMAV RS1500 drum screening machine is designed for space-saving screening and can separate large volumes of material in confined spaces, depositing the screened material via conveyor belts and in stockpiles. As a road-legal trailer (approved for 80 km/h) with TüV certification and a total weight of 2.4 t, the machine is easy to transport. Suitable for processing all types of soil, crushed construction debris, or compost, the RS 1500 is ideal for use in landscaping, civil engineering, and pipeline construction! The RS1500 recycling screen offers a compact drum screener that requires minimal space while efficiently separating large quantities of material. Its main advantage is that, as a TÜV-certified car trailer, it can be transported at 80 km/h on public roads, providing maximum flexibility regarding the operation site if you choose to purchase this drum screen. Kdedpforrvy Aex Al Nsk This is especially advantageous for use in civil engineering, pipeline construction, and landscaping. The compact drum screener weighs only 2.4 tonnes. For challenging soils, we recommend the compact screens KS220 and KS275. Both models, with a total weight of 3.5 tonnes, can also be transported conveniently to construction sites, just like the smaller drum screen. The hydraulic tipping grid allows oversized stones or clay lumps to be separated at the initial stage. With the appropriate mesh size, even fine gravel can be screened. This makes it invaluable in processing topsoil and concrete recycling, helping you cut significant landfill costs when you purchase a drum screen. Quick to deploy, mobile compact screening systems can rapidly, easily, and above all efficiently convert large volumes of debris or soil into real value by the tonne. Typically, compact screening systems handle demolition waste, topsoil, crushed stone, gravel, rubble, and even wood chips quickly and reliably. Important for the user: a mobile compact screen plant is suited for short-term private construction sites as well as continuous use on large-scale commercial projects. A key benefit is the maneuverability of compact screening systems. Thanks to road approval for 80 km/h, you can simply hitch the system to a standard car or any vehicle with a 2.5 t towing capacity and transport it to the next worksite, just like any trailer. This saves on tipping and landfill costs, as well as material loading and haulage expenses. What materials are suitable for a mobile compact screen? While mobile compact screens are relatively small, they can handle a wide range of materials. For example, topsoil, humus, crushed stone, and gravel can be fed into the screener without issue. Even demolished rubble and wood chips present no problems for the mobile compact screening plant. Mini-excavators, mobile excavators, crawler excavators, compact excavators, and zero-tail swing excavators—these compact, agile machines are known under a variety of names. They are often used by private individuals for garden redesign when a spade or shovel isn't sufficient, or on small construction sites in earthworks or landscaping. Furthermore, compact excavators have long been part of the machinery fleets of large construction companies in the industry.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1941, lastna masa: 7.480 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2011, naslednji pregled (TÜV): 10/2024, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.770 mm, prostornina tovornega prostora: 93 m³, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, barva: srebrn, Leto izdelave: 2011, Oprema: ABS, H & W moving floor, Cargo Floor system, lift axle, sliding tarpaulin, platform, foldable rear light protection, moving bulkhead with service door, German semi-trailer. Sale only to commercial customers and under exclusion of any warranty. We deliver to any German seaport. Kodpfx Aljq T Iuyj Nodk

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2150, lastna masa: 5.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2016, naslednji pregled (TÜV): 04/2026, prostornina tovornega prostora: 27 m³, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, medosna razdalja: 1.310 mm, barva: srebrn, Leto izdelave: 2016, Oprema: ABS, Kempf aluminijasta kesona s kovinskim šasijem, 27 m³, dvižna os, rolo ponjava, podest, zložljiva zaščita proti podletu, BPW osi z disk zavornim sistemom, nemška polprikolica. Prodaja izključno pravnim osebam in brez kakršnekoli garancije. Dobavimo v katerokoli nemško morsko pristanišče. Kdsdpfx Ajx Rrfmol Njk

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, barva: sivo-črna, skupna masa: 16.000 kg, največja dovoljena obremenitev: 14.300 kg, lastna masa: 1.700 kg, prostornina tovornega prostora: 9 m³, širina tovornega prostora: 2.350 mm, dolžina tovornega prostora: 5.000 mm, višina nakladalnega prostora: 800 mm, Dear Sir or Madam, We are offering a brand new 9m³ roll-off container, manufactured in-house, for sale. The container features the following specifications: - Manufactured to DIN 30722 standards - Lifting bracket diameter: 60mm - Hook height: 1570mm - Internal length: 5,000mm - Internal width: approx. 2,350mm - Internal height: 800mm - Floor made of 5mm S-355 steel sheet - Side walls, front wall & rear doors made of 3mm S-235 steel - Continuous welding of sheets and profiles Kodpfsxugkpjx Al Njdk - Side stiffener spacing: 400mm - Floor stiffeners every 400mm - 8x completely hidden 5t lashing eyes recessed in the floor - 2x 5.3t lashing rings on the inside of the front wall - Upper frame: round tube, 89mm diameter - Continuous net hooks around the perimeter - Exterior rollers: greaseable and replaceable - Warning markings according to §32 (1) StVO & DIN 67520 - Gross weight: 16,000kg - Unladen weight: approx. 1,700kg - Payload: approx. 14,300kg - Complete epoxy primer - 2-component coating in RAL 7016 anthracite - Rear portal doors including central locking & additional lock in accordance with UVV - Including nameplate & container inspection according to DGUV Rule 114-010 (formerly BGR 186) - Immediately available - Unit price: €4,300.00 plus VAT Nationwide delivery available for an additional charge. If you are interested in other roll-off container products, please feel free to contact us as well.

Stanje: rabljeno, MAKE – TUSCAN MODEL – TL29 YEAR – 2002 CONTROL – FANUC OT TURRET – 8-fach Revolverkopf mit zahlreichen Haltern UMLAUFÜBER BETT – 740 mm UMLAUFÜBER QUERSCHLITTEN – 420 mm SPITZENWEITE – 4000 mm SPINDELBOHRUNG – 250 mm VERFAHRWEGE – X-Achse 500 mm / Z-Achse 3700 mm Kjdpowmlcdjfx Al Nodk DREHZAHL – 15–700 U/min ANTRIEB – 3-Gang-Getriebemotor, 30 kW SPÄNEFÖRDERER 4-Backen-Futter SPÄNEFÖRDERER