Tla Tlakovci nakup rabljenega (2.397)

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) Cgsdpfjykub Asx Ahxst F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for dark products Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), številka stroja/vozila: S23SFERA05, Mobile Stretch Wrapper ATLANTA SFERA Easy TECHNICAL DETAILS: - Two maintenance-free AGM batteries 12 V – 100 Ah connected in series - 160 pallets per charge – charging time: 8–10 hours - High-frequency battery charger with LED display Csdpfxsykty Dj Ahxjgt - Wrapping height “machine with mast (pallet included): 2,150 mm - Height detection via photoelectric sensor or manual input on the display - Safety bar for emergency stop of drive system - Emergency stop switch in accordance with CE regulations - Acoustic warning signal and warning light on machine start-up - Fall protection for the film carriage - Push buttons for Start & Stop - Machine function per CE regulations Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: - All operating parameters adjustable via display - F00 – Display lock for program change - F02 – Adjustable machine speed around the pallet up to 80 m/min - Carriage speed up/down independently adjustable - F03 – Carriage speed upwards from 1.3 to 5.4 m/min - F04 – Carriage speed downwards from 1.3 to 5.4 m/min - F05 – Number of wraps at pallet base (1–10 wraps) - F06 – Number of wraps at pallet top (1–10 wraps) - F09 – Pallet wrap height setting - F13–F16 – Film application tension for foot & head wrapping / upward & downward travel adjustable independently - F17–F20 – Film pre-stretch for foot & head wrapping / upward & downward travel adjustable independently - F62 – Ergonomic height for film change - Display of film consumption (option for PRS – PS) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: - 6 storable wrapping programs for SFERA EASY - F01-1 – Cross wrapping (upwards/downwards) - F01-2 – Simple wrapping (upwards or downwards only) - F10–F11 – Wrapping cycle with predefined start and stop height - F12 – Wrapping to a stored height (with deactivation of photoelectric sensor for height) - F21 – Wrapping cycle for large pallets - F22 / F23 – Wrapping cycle for top sheet - F29 – Softstart cycle for application of edge protection - F30–F31 – Wrapping cycle with reinforcement and adjustable wrap count - Softstart to reduce film tears on sharp pallet edges - Wrapping cycle with manual or motorized rope forming (optional) FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE - Brake manually adjustable from the carriage using tension roller - Film specifications: Max. outer diameter Ø 250 mm – core Ø76 mm – height = 500 mm - Option: Stretch film with core Ø50 mm or coreless stretch film - Standard connection values: 230 V – 1L+N+PE – 50 Hz Available options: - Wrapping height up to 3,500 mm - FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” 200% - FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM CARRIAGE TYPE “PS” (POWER STRETCH) 120–400% - Automatic rope forming for wrap reinforcement - Automatic cutting system to produce 3 strips for “BANDEROLL WRAPS” - Cold-store version for operating temperatures down to -5° C - BATTERIES: LITHIUM RELION 2 x 12V Additional units available from stock in Ludwigsburg. Image may differ from actual product.

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 5.200 h, Teža: 5600 kg Cgjdpfx Ajy H Uwdjhxjt z 1 nakladalno žlico: SWE MS 03 brez vilic za palete!

Leto izdelave: 2022, obratovalne ure: 1.844 h, stanje: rabljeno, Vrsta goriva: Dizel Novo: Ne Namen uporabe: Gradbeništvo Znamka motorja: Kubota Dimenzije tovornega prostora: 209 x 129 x 250 cm Cgedpfxjucr Ins Ahxst Serijska številka: ESF208512 Za več informacij se obrnite na PFEIFER GROUP.

Leto izdelave: 2023, obratovalne ure: 777 h, stanje: rabljeno, Vrsta goriva: dizel Novo: ne Namen uporabe: gradbeništvo Znamka motorja: Kubota Csdpeucr Ibefx Ahxjgt Dimenzije tovornega prostora: 209 x 129 x 250 cm Serijska številka: ESF210134 Za več informacij se obrnite na PFEIFER GROUP.

Leto izdelave: 2023, obratovalne ure: 805 h, stanje: rabljeno, Vrsta goriva: dizel Novo: ne Namen uporabe: gradbeništvo Znamka motorja: Kubota Dimenzije tovornega prostora: 209 x 129 x 250 cm Csdpfsucr Ihox Ahxegt Serijska številka: ESF210117 Za več informacij se obrnite na PFEIFER GROUP.

Leto izdelave: 2022, obratovalne ure: 2.309 h, stanje: rabljeno, Vrsta goriva: Dizel Novo: Ne Namen uporabe: Gradbeništvo Znamka motorja: Komatsu Dimenzije tovornega prostora: 209 x 129 x 250 cm Serijska številka: ESF208606 Codpfx Aeucr Hqohxegt Za več informacij se obrnite na PFEIFER GROUP.

Leto izdelave: 2023, obratovalne ure: 40 h, stanje: rabljeno, Vrsta goriva: Diesel Novo: Ne Namen uporabe: Gradbeništvo Znamka motorja: Kubota Dimenzije tovornega prostora: 209 x 129 x 250 cm Cgodpfx Asucr E Tshxot Serijska številka: ESF210135 Za več informacij se obrnite na PFEIFER GROUP.

Leto izdelave: 2022, obratovalne ure: 3.432 h, stanje: rabljeno, Vrsta goriva: Dizel Csdsy Hbuispfx Ahxjgt Novo: Ne Namen uporabe: Gradbeništvo Znamka motorja: Komatsu Dimenzije tovornega prostora: 209 x 129 x 250 cm Serijska številka: ESF208606 Za več informacij se obrnite na PFEIFER GROUP.

Leto izdelave: 2022, obratovalne ure: 1.279 h, stanje: rabljeno, Vrsta goriva: Diesel Cedpoy Hbt Ssfx Ahxjgt Novo: Ne Namen uporabe: Gradbeništvo Znamka motorja: Kubota Dimenzije tovornega prostora: 209 x 129 x 250 cm Serijska številka: ESF208511 Za dodatne informacije se obrnite na PFEIFER GROUP.

Leto izdelave: 2022, obratovalne ure: 1.018 h, stanje: rabljeno, Vrsta goriva: dizel Novo: ne Namen uporabe: gradbeništvo Cedpfx Aheucrzuoxjgt Znamka motorja: Kubota Dimenzije tovornega prostora: 209 x 129 x 250 cm Serijska številka: ESF208518 Za dodatne informacije kontaktirajte PFEIFER GROUP.

Leto izdelave: 2022, obratovalne ure: 1.620 h, stanje: rabljeno, Vrsta goriva: dizel Novo: ne Namen uporabe: gradbeništvo Znamka motorja: Kubota Cgsdpsucr Dijfx Ahxot Dimenzije tovornega prostora: 209 x 129 x 250 cm Serijska številka: ESF208623 Za več informacij se obrnite na PFEIFER GROUP.

Leto izdelave: 2022, obratovalne ure: 1.790 h, stanje: rabljeno, Vrsta goriva: dizel Novo: ne Namen uporabe: gradbeništvo Cgedpfx Ahoy Hbtxoxet Znamka motorja: Kubota Dimenzije tovornega prostora: 209 x 129 x 250 cm Serijska številka: ESF208623 Za več informacij se obrnite na PFEIFER GROUP.

Leto izdelave: 2023, stanje: novo, * Year of manufacture: 2023 (new unit) * Prime power (PRP): 32 kVA / 26 kW * Rated standby power (ESP): 33 kVA / 26 kW * Rated voltage: 400V * Rated frequency: 50Hz Cgsdpsl Iyyuofx Ahxet * With terminal strip (without external sockets) * Dimensions: 2,225 x 970 x 1,185 mm (L x W x H) - Weight without fuel: 137 kg

Leto izdelave: 2023, stanje: novo, * Generator Data QEP 8 * Rated Frequency Hz: 50 Cgodel Iy Dijpfx Ahxst * Rated Voltage V: 400/230 * Rated Power kVA: 7 * Peak Power kVA: 8.3 * Power Factor cos Phi: 0.8 * Fuel Tank Capacity l: 11 * Fuel Autonomy at Rated Power h: 3.9 * Socket Configuration: 1 x SCH, 1 x 3P16A, 1 x 5P16A Each of the durable QEP generators delivers reliable operation for years, even under the toughest working conditions. User-friendly design, safety, and outstanding build quality make QEP generators the perfect partner for construction professionals. Features: • Recoil starter • Large fuel tank • Fuel shut-off valve • Power outlets • Low oil shutdown (automatic engine shut-off at low oil level) • Overheat protection • CE-compliant noise level • Protective cover

Stanje: zelo dobro (rabljeno), Atlas Type: CI3000+ Ci3000+ Weather-Ometer/ Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating hours: Device 816.5 h Lamp operating hours: 647.4 h Total irradiator operating hours: 88.9 h Atlas CI3000+ Xenon Weather-Ometer with calibration suitcase The Ci3000+ Weather-Ometer and Fade-Ometer, with their advanced digital control systems, represent milestone achievements in the application of digital and optical technologies to user-friendly laboratory weathering instruments. The CI3000 series is approved by many OEMs in the textile, paint and coatings as well as the plastics industries as the exclusive platform for precise, reproducible, and repeatable results to predict product lifespan. The CI3000 series is certified according to CE, UL, CSA, ISO, and EN. Key features of this device include: a rotating specimen rack to maximize homogeneity of all samples; custom-designed nozzles for uniform front and rear sample spraying; ASTM black panel thermometer or ISO/DIN black standard thermometer for control and monitoring of sample-level temperature to ensure repeatability of test outcomes. - 4500 W water-cooled xenon lamp - Total exposure area: 2188 cm² (339 in²) - 12-inch TFT full-color touchscreen control panel – displays all test parameters - Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature - Direct setting and control of relative humidity - Direct setting and control of sample chamber air temperature - Display of diagnostic messages - 14 factory pre-programmed test methods (Weather-Ometer); 6 factory pre-programmed test methods (Fade-Ometer) Specifications: - Climate type - Test method: Sunlight simulation Cgjdpfxotq Em Es Ahxot - Xenon arc lamp light source Applications: - Additives and dyes - Adhesives and sealants - Architecture and construction - Automotive industry - Food and beverages - Graphics - Packaging - Paints and coatings - Photovoltaics - Plastics - Textiles - Wind and solar - Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: used Scope of delivery: (see image) (Specifications subject to change. Errors excepted!) For further questions, please feel free to contact us by phone.

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 53.000 h, številka stroja/vozila: APF 194907, tlak (maks.): 7,5 letvica, največja hitrost vrtenja: 1.485 obr/min, TEHNIČNI PODATKI Maksimalni delovni tlak: 7,5 bar Vhodna moč: 355 kW Hitrost gredi: 1.485 vrt./min PODROBNOSTI O STROJU Obratovalne ure: 53.000 h OPREMA Atlas Copco sušilnik zraka, model: MD1000 W CE Maksimalni delovni tlak: 10,5 bar Cedpfxey Ia R Se Ahxjgt Letnik izdelave: 2014

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.400 kg, vrsta goriva: dizel, barva: zelen, konfiguracija osi: 2 osi, obratovalna teža: 2.400 kg, lastna masa: 2.400 kg, Leto izdelave: 2018, obratovalne ure: 1.030 h, prva registracija: 11/2018, Oprema: AdBlue, Na voljo je tipska ploščica, Gradbeni kompresor Proizvajalec: Atlas Copco Csdpfsv Nv H Hex Ahxogt Tip: XAVS 186 Leto proizvodnje: 2018 Delovne ure: ca. 1031 h - Maksimalni tlak: 14 bar - Zmogljivost: maks. 11,4 m³/h - Moč: 104 kW - Motor: John Deere Tel E-mail:

Stanje: rabljeno, Leto izdelave: 2019, številka stroja/vozila: LC591, Technical Specifications & Performance Data This complete used bottling line is designed for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utility and process equipment. The line integrates components from renowned manufacturers to ensure consistent quality and availability in industrial packaging environments. Production speed: up to 8,000 bottles per hour Compatible bottle formats: 0.33 L, 0.5 L, 0.75 L, 1.0 L, 1.5 L, 2.0 L Containers: PET and glass bottles Main filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping heads Stretch blow molder: Easy Blow 4L (4,200 bph nominal) Labelers: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bph Packaging & handle application: SMI LSK 30 T Ergon shrink wrapper; SMI Pack HA-25 SX handle applicator Pallet logistics: Sinkrotech APM-6000-JU palletizer; Atlanta Mytho-A pallet wrapper; additional manual wrapper Process & utility units: GEA pasteurization unit HTF 3000PIN/19; GEA CIP unit; Trane Tracer CH535 CGAX/SXAX chiller; Therminus steam boiler (456 kW); Kaeser compressors (CSDX 165 and N 502-G booster) Inspection & coding: FT System for fill level/closure/label inspection; Hitachi UX printer Advanced Automation & Control Systems The line features state-of-the-art automation and quality control for stable operation and reproducible product quality. A PLC-controlled architecture coordinates rinsing, filling, capping, labeling, and packaging, while inline inspection and coding ensure regulatory compliance and traceability. Cgjdpjyhbibsfx Ahxet PLC/HMI: PLC installed for central control and recipe management Inspection: FT System for fill volume, closure presence/position, and label inspection Electrical: 400 V, 50 Hz, 16 A reference (component level) Coding: Hitachi UX inkjet printer for date/batch marking Format changeover: Designed for multiple PET and glass bottle formats Safety: Standard safety guards and emergency stop switches at all stations Production Line Integration Capability Designed for flexible beverage production, the line integrates upstream preform handling and stretch blow molding with downstream conveying, labeling, and packaging. Vetromeccanica air conveyors and line conveyors ensure gentle bottle handling and buffering. Upstream: Preform conveyor and hopper, Easy Blow 4L stretch blow molder Conveyors: Vetromeccanica Eolo air and line conveyor systems Format flexibility: 0.33 L to 2.0 L for PET and glass End-of-line: shrink packing, handle application, palletizing...

Stanje: rabljeno, Leto izdelave: 2023, Atlas Copco XAS 58-7G Compressor Trailer VIN: P0881834 Equipment: * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 HP * TEX 230PE H28 pneumatic hammer * TEX 10PSKL pneumatic hammer * TERRA Hammer TU 055R soil displacement mole * Compressed air hose * Hose reel Compressor with Power Generator ATLAS COPCO XAS 58-7, Year of manufacture: 11/2023 Features: Construction compressor Atlas Copco MCT type XAS 58-7 G, with integrated generator set (6 kVA) Sockets: 2 x 360V / 1 x auxiliary power. Chassis: unbraked, height-adjustable. Initial oil filling, crane lifting eye, sealed underbody drip tray, SMP (Starter Motor Protection), overrun and parking brake, automatic reverse, jockey wheel, support leg (unbraked version), truck DIN towing eye (400 mm), lighting compliant with StVZO. Included: Pneumatic hammer Atlas Copco type TEX 10 PSKL, weight: 10.7 kg Pneumatic hammer TEX 230 PE, weight: 27 kg Various pointed and flat chisels, asphalt spade 115 mm wide TERRA hammer TU055R, TERRA high-pressure air hose approx. 15,000 mm long, TERRA oiler Original price: complete with accessories €28,000 net * New general inspections / safety inspections, as well as gross weight upgrades/downgrades, are available on request. We are also happy to assist with the procurement of export/temporary license plates. Vehicle transfers within Germany are possible. Please contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing or typographical errors, changes, interim sales and errors excepted! Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The main strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², we offer a large selection of vehicles. Our company philosophy is defined by fairness and integrity. Customer satisfaction is very important to us, which is why we offer an excellent all-round service package, providing a competent contact person to support our customers with the purchase or sale of vehicles. Csdpeyai Euefx Ahxjgt See for yourself! Our service for you: Vehicle Loading We are happy to assist with loading your purchased vehicles. Organising Special Transport We are happy to help organize special transports. Temporary / Export Plates We are happy to assist in procuring export or short-term license plates. Completion of customs formalities.

Leto izdelave: 2022, obratovalne ure: 3.094 h, stanje: rabljeno, Vrsta goriva: Diesel Novo: Ne Namen uporabe: Gradbeništvo Znamka motorja: Kubota Dimenzije tovornega prostora: 209 x 129 x 250 cm Serijska številka: ESF208509 Cgjdpfxey Evnbs Ahxot Za več informacij se obrnite na PFEIFER GROUP.

Leto izdelave: 2022, obratovalne ure: 3.049 h, stanje: rabljeno, Vrsta goriva: dizel Novo: ne Cgjdey Evm Depfx Ahxot Namen uporabe: gradbeništvo Znamka motorja: Kubota Dimenzije tovornega prostora: 209 x 129 x 250 cm Serijska številka: ESF208613 Za več informacij se obrnite na skupino PFEIFER GROUP.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 1.700 h, številka stroja/vozila: XTC-F1530H, vrsta laserja: vlakenski laser, laserska moč: 3.000 W, valovna dolžina laserja: 1.070 nm, najv. debelina jeklene pločevine: 20 mm, maks. debelina aluminijaste pločevine: 8 mm, maks. debelina medeninaste pločevine: 6 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, vhodna napetost: 380 V, CNC Laser Cutting Machine XT-H1530 with Integrated CWFL-3000 Cooling — Stability, Power, and Cutting Precision The XT-H1530 CNC laser cutting machine is a professional solution for high-precision metal cutting. Equipped with the powerful CWFL-3000 industrial cooling system, this machine ensures stable performance even under prolonged loads and high laser power. XT Laser Technical Specifications: Model: XTC-F1530H Type: Fiber laser cutting machine Main Parameters: - Laser power: 3000 W (3 kW) - Wavelength: 1070 nm - Working area: 1500 × 3000 mm - Laser class: 4 Power Supply: - Voltage: 380 V - Rated power consumption: 22 kW - Frequency: 50 Hz Maximum cutting thickness: - Mild steel (carbon steel): up to 18–20 mm (optimal 12–16 mm for best quality) - Stainless steel: up to 8–10 mm (optimal 6–8 mm) - Aluminium: up to 6–8 mm - Brass/copper: up to 4–6 mm Key Advantages: Cgsdpfx Ahoy Ndmaexst - Industrial CWFL-3000 chiller — efficient heat dissipation, reliable laser source protection, and stable operation - High cutting accuracy — clean edges with no further finishing required - Automated CNC system — user-friendly control and minimal human factor involvement - 1500×3000 mm working area — universal format for sheet metal processing - High processing speed — optimised for production workflows - Robust machine frame — minimal vibration and long-lasting durability Technical Specifications Recap: - Working area: 1500 × 3000 mm - Laser type: Fiber laser - Laser power: 3000 W - Cooling system: CWFL-3000 (industrial chiller) - Positioning accuracy: ±0.03 mm - Repeatability: ±0.02 mm - Maximum traverse speed: up to 120 m/min CWFL-3000 Chiller Benefits: - Maintains stable laser source temperature - Extends equipment service life - Overheating protection during intensive operation - Suitable for high-power lasers (up to 3 kW) Application Areas: - Metal fabrication - Mechanical engineering - Advertising industry - Production of decorative elements - Series production of components The XTС-H1530 with CWFL-3000 is the optimum choice for businesses that demand stable, continuous, and precise machine operation.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 23.511 h, Funkcionalnost: popolnoma funkcionalen, Vodno hlajen sušilnik Atlas Copco FD510, 30,60 m³/min, leto izdelave 2016. Codpfjx Sx U Djx Ahxegt

Stanje: pripravljen za uporabo (rabljen), Atlas Copco Compressed Air System Complete – GA26VSD+ + GA18 SP + FX11 + 1500 l Tank For sale is a used Atlas Copco compressed air system offered as a complete package. System components: Atlas Copco GA26VSD+ Year of manufacture: 2016 Operating hours: approx. 28,000 h Power: 26 kW Max. working pressure: 13 bar Volume flow: 5.15 m³/min 400 V / 50 Hz / 3 Ph Atlas Copco GA18 SP Cjdpfey D Ur Aex Ahxogt Year of manufacture: 1999 Operating hours: approx. 37,000 h Power: 18.5 kW Max. working pressure: 8 bar Free air delivery: 48.3 l/s Speed: 3,000 rpm Atlas Copco FX11 Refrigeration Dryer Type: FX 11 (A9) Year of manufacture: 2016 Max. compressed air pressure: 13 bar Connection: 230 V Power: 1.64 kW Air receiver 1,000 l Operating hours (according to spec): approx. 22,000 h Last inspection 2024 Control cabinet / without pipework / with accessories as shown in the pictures Condition: Used. Last servicing and inspection in 2024. Optical condition see pictures. Preferably for sale as a complete unit. Notes: • Viewing possible and recommended by appointment • Collection / dismantling / loading by arrangement • Sale preferably to commercial customers • Invoice will be provided