Motorizirane krožne škarje za tla in obroče

PRINZING KSE 31-12

Stanje: novo, Fastech 3-Roller Round Bending Machine FRM 1050 x 90 Technical Specifications: Special features included in price: - Hardened rollers - Motorized rear roller adjustment - Digital display Sheet width: 1050 mm Sheet thickness: max. 3.3 mm Sheet thickness (pre-bending): 3.0 mm Roller length: 1050 mm Roller diameter: 90 mm Minimum bending diameter: 130 mm Weight: 475 kg Dimensions (L x W x H): 1750 x 800 x 1130 mm Motor: 1.1 kW Equipment: Pgsdehzq Dbopfx Anpsu - Upper and lower rollers electrically driven - Swing-out upper roller - Device for conical bending - Asymmetric roller arrangement - Self-braking main motor - Separate control and operator panel - Safety rope Values apply for St-37 / 240 N/mm² CE marking

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Euromac hidravlični udarno-rezalni stroj Tip CX1000/30/2000 Nosilnost 30 ton Domet osi Y: 1000 mm Domet osi X: 2000 mm Pjdpfx Aopmt Ttsnpjgu Domet osi X s ponovno pozicioniranjem: do 10000 mm Nadzorni sistem Euromac Eurowin Večnamensko orodje s 6 priključki + s 6-mestnim držalom za matrice Različno orodje je priloženo.

Stanje: novo, Leto izdelave: 2026, - Capacity: 2070 x 6 mm - Electrically adjustable rear roll - Electrically adjustable lower roll (material clamping) - Digital display for rear roll movement - Digital display for lower roll movement (material clamping) - Hardened rolls - Cone rolling - Swing-out top roll - Centralized lubrication system - Brake motor - Emergency stop - Documentation Pgjdpfx Anolht N Iepsu - 400V

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: ročni, delovna širina: 1.020 mm, nastavitev pregibne grede: 46 mm, Kot upogiba (maks.): 135 °, skupna masa: 340 kg, skupna dolžina: 1.350 mm, skupna širina: 850 mm, skupna višina: 1.175 mm, Oprema: dokumentacija / priročnik, Upper and lower blades in removable segments Including manual rear gauge PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2.5 mm Pedpfjga T A Dsx Anpjgu Max. working length ----- 1020 mm Max. opening width ----- 46 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Max. bending angle ----- 0 - 135° Weight ----- 340 KG Width ----- 1350 mm Depth ----- 850 mm Height ----- 1175 mm

Stanje: novo, - Capacity 1570 x 9 mm - Electrically adjustable rear roller Pgjdpfxeg Ntlcj Anpju - Electrically adjustable lower roller (material clamping) - Digital display for rear roller movement - Digital display for lower roller movement (material clamping) - Hardened rollers - Cone rolling - Removable top roller - Centralized lubrication system - Brake motor - Emergency stop - Documentation - 400V

Stanje: novo, Ostas 3-Roller Plate Rolling Machine SMR-S 1570 x 170 Technical Specifications: Special equipment included in the price: - Motorized adjustment of the lower rolls - Hardened rolls - Motorized rear roll adjustment - 2 x digital readouts - Sheet width 1570 mm - Maximum sheet thickness 8.0 mm - Pre-bending sheet thickness 7.0 mm - Roll length 1570 mm - Minimum bending diameter 255 mm - Roll diameter 170 mm - Weight 1960 kg - Dimensions (L x W x H): 3200 x 920 x 1260 mm - Motor 5.5 kW Features: - Electrically driven top and bottom rolls - Swiveling top roll - Conical bending device Pedpfxsiw D Sme Anpegu - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating panel - Safety line, CE mark - Values apply to St-37 / 240 N/mm²

Stanje: novo, Leto izdelave: 2025, Longitudinal and Transverse Seam Welding Machine (50Hz) --- Rated power at 50% duty cycle: 80 kVA Short-circuit current: approx. 35.9 kA Electrode force: 100–600 daN / double stroke Podpfx Aewqmrzjnpegu Throat depth: 550 mm Roller electrode Ø longitudinal: 160/125 mm Roller electrode Ø transverse: 160/160 mm Feed rate: 0.63–5.7 m/min (electronic) --- Welding controller: Filius Classic, 128 programs Siemens S7-1200F PLC machine control Prepared for spot and projection welding. --- Including extra options: - 2-channel safety valves - Double foot switch - Adjustment device - Lower arm support - Depressurised lowering of upper assembly - Electronic flow monitor - Electronic electrode force switch - Main switch --- 6 months warranty --- Training and commissioning on request --- Spot welding electrodes & spare parts available from stock --- For further information, please visit our homepage

Stanje: zelo dobro (rabljeno), globina grla: 415 mm, water-cooled, pneumatically operated spot welding tongs Make: DALEX Type: A 3139-S2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8 kA Secondary open-circuit voltage: 2.9 V Electrode force: 300 daN with universal joint suspension and suspension bracket 10 m connection cable Pjdpfxetdnqze Anpsgu RS 15 synchronised welding control 1 pair of electrode arms, 415 mm throat depth, top 245/55-1 K and bottom V 20//415 S

Stanje: novo, Leto izdelave: 2025, Laser power: 6000 watts Round tube: 20 - 350 mm Square tube: 20 x 20 - 350 x 350 mm Rectangular tube: 20 x 20 - 350 x 350 mm Max. positioning accuracy X, Y axis: 0.05/1000 mm Max. positioning accuracy U axis: 0.05/1000 mm Max. mild steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm Max. tube weight: 1200 kg Length: 17,296 mm Width: 4,271 mm Height: 2,933 mm Standard equipment Working range for tube diameter Pgjdpjxgc Arjfx Anpou Round tube: 20 mm - 350 mm Square tube: 20 - 350 mm Rectangular tube: 20 x 20 mm - 350 x 350 mm Minimum clamping tube thickness: ≥1 mm Y-axis travel: 9100 mm Z-axis travel: 4000 mm X-axis travel: 400 mm Maximum loading length: 9200 mm Maximum unloading length: 6000 mm X,Y axis positioning accuracy: +/-0.05 mm/1000 mm X,Y axis repeat positioning accuracy: +/-0.05 mm/1000 mm Maximum rotational U-axis positioning speed: 100 RPM Maximum acceleration X/Y axis: 1.0 G X-axis rapid traverse speed: ≤50 m/min Maximum loading capacity per tube: ≤133 kg/m Machine operating temperature: 20℃–40℃

Stanje: novo, Very robust motorized 3-roll plate bending machine Weight: 670 kg Equipped with hardened rolls Roll hardness: HRC 28-32 Pgjdpjga Tz Asfx Anpsu Minimum sheet thickness: 0.5 mm Maximum sheet thickness: 3 mm Maximum working width: 1,000 mm Pre-bending: 2.5 mm Roll diameter: 95 mm Motor power: 1.5 kW INCLUDES * Hardened rolls * SCHNEIDER electrical components