CNC zložljivi tiska

EHT EHPS 25-35

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: BT40 - Spindle drive power: 24/32 [kW] - Spindle speed: 12,000 [rpm] - Spindle hours: 9,122 [h] LINEAR AXES - Travel X/Y/Z axes: 650/765/520 [mm] - Rapid traverse speed (X/Y/Z): 40/40/36 [m/min] - Feed rate (X/Y/Z): 18/18/18 [m/min] SWIVEL AXIS A - Travel: 150 [degrees] (+/-) - Rapid traverse speed: 20 [rpm] - Feed rate: 7,200 [mm/min] SWIVEL AXIS B - Travel: 360 [degrees] (+/-) - Minimum resolution: 0.001 [degrees] - Rapid traverse speed: 30 [rpm] - Feed rate: 7,200 [mm/min] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 120 - Tool change time: 1 [sec] TABLE - Table size: 500 x 500 [mm] - Max. table load: 500 [kg] - Distance from table to spindle nose: 160/680 [mm] PALLET CHANGER - Pallet size: 500 x 500 [mm] Dsdpfx Afeuhbz Uolekg - Number of pallets: 2 - Pallet change time: 30 [sec] ELECTRICAL SUPPLY - Total power consumption: 54 [kW] MACHINE HOURS - Power-on hours: 24,226 [h] - Operating hours: 9,122 [h] EQUIPMENT - Control: Heidenhain TNC530 - Interface: RS232 / USB / PCMCIA - Electronic hand wheel - 3-color status lamp - Coolant tank * with high-pressure pump: 20 [bar] - Through spindle coolant (IKZ) - Chip conveyor - Spindle cooling - Tool measurement probe: Renishaw - Electrical transformer

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 0401-230047, The FICEP Tipo G31 sheet metal processing center is designed for the efficient machining of steel sheets and flat steel in steel construction and steel trading applications. The Ficep Tipo G31 LG is capable of drilling, center punching, thread cutting, countersinking, marking, milling, oxy-fuel cutting, and plasma cutting flat steel or sheet metal panels in a single system, with a maximum sheet width of 3,100 mm and a maximum sheet length of 14,000 mm. This CNC-controlled sheet metal processing center is equipped with two 26 kW drilling units. Two tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changing. The system is suitable for sheet sizes as follows: sheet width minimum 200 mm, maximum 3,100 mm; sheet length minimum 2,500 mm and maximum 14,000 mm. Dodpfx Aferr Sqlsljkg For plasma cutting, a powerful and modern Hypertherm HPR 400 XD plasma source is provided. Additionally, the system is equipped with an oxy-fuel cutting unit for processing thick material gauges. The drilling unit, featuring high torque and spindle speeds up to 6,000 rpm, is designed for use with carbide tools such as solid carbide drills, Nenok Multiplex indexable insert tools, and also for applications with HSS coolant channel drills for drilling diameters from 10 mm to 40 mm. The Ficep Tipo G31 system is in excellent condition and has very few operating hours.

Stanje: zelo dobro (rabljeno), Veneer press JU 60 2200 x 1200 mm Heating plate damaged (see pictures), heating plate operates Year of manufacture: 1965, heating power: 12 kW Dodpfxomhguaj Afljkg Loading costs (forklift rental approx. €500)

Leto izdelave: 2002, Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 16.34.02, 6-matrični, 6-udarecni vijacni stroj (Header) Dkedpfxeh Tkrae Aflog MULTIPRESS MP610LS Maks. premer odreza (500 N/mm²): 12 mm Maks. dolžina odreza: 105 mm Maks. dolžina izmeta (na strani matrice): 80 mm Maks. dolžina predizmeta: 23 mm Maks. hitrost: 180 kosov na minuto

Stanje: pripravljen za uporabo (rabljen), Migatronic MTE 440 TIG AC/DC welding machine for steel and aluminium. Water cooling unit: Migatronic CTU 3000. Maximum welding current: 440 A. Inspected by EWM Service. You are welcome to arrange a viewing. You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. If you have any questions, please feel free to contact us by phone. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Dsdpfx Afeh Ib Idjlokg Technical data may vary, and errors in the description of the item may occur and are subject to change. Shipping is only available to commercial customers – private buyers can only collect the item in person.

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Dodsfrvzvopfx Aflskg Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: novo, Leto izdelave: 2025, Quick mitre adjustment from 30° to 150° steplessly with 0.5° accuracy according to scale. The mitre pivot point is at the intersection of the saw blade and the material stop, ensuring no change in the length dimension. End stops at 30° + 45° left and 30° + 45° right. Manual material clamping. In every frame angle position, the material is clamped parallel at 90°. Cutting pressure reduction is achieved by the dead weight of the heavy, torsion-resistant saw frame, with fine adjustment according to material cross-section via a hydraulic damping cylinder. Djdebi S Dispfx Aflokg Standard with coolant system, which can optionally be supplemented by a micro-dosing unit. Machine base with chip collection tray. Saw blade drive with end shut-off. Precision saw blade carbide roller guides. Paint finish in silver-grey / blue-grey (RAL 7001 / RAL 7031). 1 saw blade mounted on the machine 4/6 TPI Operating manual and spare parts list on CD-ROM. Optional equipment: Hydraulic lifting of the saw frame Version Manual Mitre capacity: 30° left ø 130 mm; square 120x120 mm 45° left ø 200 mm; square 180x180 mm 90° ø 260 mm; square 300x260 mm 45° right ø 200 mm; square 180x180 mm 30° right ø 130 mm; square 120x120 mm Motor: [kW] 1.8 Saw blade: [mm] 3350x27x0.9 Saw blade speed: 35/75 m/min Working height: [mm] 900

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1996, Retrofittato: 2025 Controllo numerico: NUEVO/NEW HEIDENHAIN TNC-320 Caratteristiche tecniche Dimensioni Dimensioni tavola: 6000 x 2000 mm Dsdpowfunyjfx Afljkg Numero cave a T: 13 Dimensione cave a T: 22 mm Corsa assi Corsa asse X: 6000 mm Corsa asse Y: 3800 mm Corsa asse Z: 1000 mm Capacità verticale (VC): 500 / 1500 mm (uscita diretta) Distanza tra le colonne: 3100 mm Testa di fresatura Testa universale UM40 (Corpo B: manuale / Corpo C: indicizzazione automatica a 3°) Mandrino diretto Sistema di bloccaggio utensile: idraulico Attacco cono: ISO50 (DIN-69871) / Tirante: DIN-96872 Gamma di velocità: 3000 giri/min Potenza mandrino: 30 kW Avanzamenti Avanzamento rapido (X / Y,Z): 7200 / 12000 mm/min Peso e dimensioni Peso macchina approssimativo: 50000 kg Portata massima sulla tavola: 15000 kg Dimensioni macchina approssimative: 14740 x 5330 x 5050 mm Accessori Carterature: 2 porte scorrevoli con nuova recinzione di sicurezza perimetrale in rete metallica Cambio testa: automatico con cerniera/supporto laterale su colonna Evacuatore trucioli: 2 pallet longitudinali Volantino elettronico: nuovo HR-510 Refrigerazione: esterna e interna ad alta pressione tramite mandrino (solo interna con testa ad uscita diretta) Condizioni di vendita Garanzia: 6 mesi sulle parti di ricambio meccaniche Condizioni di vendita e prezzo: su richiesta Visualizza tutte le caratteristiche tecniche

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 32 mm - Travel: 310 mm - Spindle speed: 280 – 7,000 rpm - Spindle drive power: 7.5 kW - Minimum C-axis resolution: 0.01° SUB SPINDLE - Max. bar diameter: 32 mm - Z-axis travel: 150 mm - Spindle speed: 280 – 7,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.01° - Number of turret heads: 1 UPPER TURRET Dodpeuha Elsfx Aflekg - Number of positions: 10 - Number of driven positions: 10 - Driven tool speed: 5,700 rpm - Driven tool power: 2.8 kW BUSHING HOLDER 1 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm ELECTRICAL SPECIFICATIONS - Supply voltage: 200 V - Total drive: 8 kVA WEIGHT AND DIMENSIONS - Footprint: 2,645 x 1,403 mm - Machine height: 1,680 mm - Machine weight: 3,880 kg EQUIPMENT - Control: Fanuc 16 iTB - 3-color status lamp - Parts removal - Parts conveyor belt - Chip conveyor - Coolant tank - Bar feeder: IEMCA BOSS 432/32LL - Electrical transformer

Stanje: pripravljen za uporabo (rabljen), Sertom brand hydraulic plate rolling machine, length 25,000 mm with loading feed, 2 lower rolls of 300 mm, upper roll of 318 mm, plate thickness capacity 14 mm. 22 kW for rotation, 5.5 kW for movements, 2.5 kW for support structure. Dimensions: 600x190x210(h) cm. Weight: 15,500 kg. Djdpfx Afsnr Npyelskg