Scm Si 400 Nova nakup rabljenega (603)

Stanje: novo, Digital version with motorized thickness table adjustment • Helical-toothed steel feed roller for constant and uniform material feed • Material feed with two speeds • Extra-long surfacing tables enable easy and precise planing of workpieces • Work tables are made of stress-relieved, annealed cast iron—durable, distortion-free, and highly resistant • Surfacing tables open to the rear simultaneously for minimal setup times • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed feed roller—ideal for efficient planing of precious timber Technical Data: Working width 410 mm Cutterhead diameter (mm) 95 mm Max. chip removal 5 mm Total surfacing table length 2200 mm Thickness table dimensions 410 x 775 mm Thickness table feed speed 6/12 m/min Itodpfx Ajdvn Hwebxoh Min./max. working height thickness table 3 – 240 mm Min. working length thickness 180 mm Motor power 5.0 kW, 400V, 50 Hz Including the following options: • Motorized thickness table adjustment with digital display • Fold-down auxiliary fence for thin workpieces • TERSA cutterhead system

Stanje: novo, Working width (finished size): 23–180 mm Working height (finished size): 6–105 mm Minimum workpiece length: 300 mm Feed speed: 6–12 m/min Motor power, horizontal spindles: 2 x 7.5 kW Motor power, vertical spindles: 1 x 7.5 kW Spindle speed: 6,000 rpm Spindle diameter: 35 mm Clamping length, vertical spindles: 120 mm Clamping length, horizontal spindles: 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle: 10 mm Loose roller integrated in outfeed table Extraction connection diameter: 4 x 120 mm Ijdoiiv Dcepfx Abxsth Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick adjustment - Front vertical pressure unit in front of the left vertical spindle - Infeed table length: 2,300 mm - Tool package consisting of 4 planer heads and one jointer rebate cutter

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Automatic moulder with 9 spindles and SCM Control 100 PC control for all spindles Max. working width: 240 mm Min. working width: 25 mm Max. working height: 120 mm Min. working height: 10 mm Minimum workpiece length: 640 mm Feed speed: 6 - 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to worktable: 0 - 80 mm Axial adjustment of horizontal spindles relative to right guide: 0 - 45 mm Min. and max. profile tool diameter: 100 - 220 mm Min. and max. cutterhead diameter: 120 - 140 mm Profiling capacity of 2nd lower horizontal spindle with 200 mm tool diameter: 15 mm Feed motor power: 5.5 kW Diameter of feed rollers: 140 mm Infeed table length: 2500 mm Quick adjustment of infeed table and guide: 10 mm Extraction capacity: 7500 m³/h Compressed air supply: 6 - 10 bar Weight: 6000 kg Dimensions (L x W x H): 6300 x 1620 x 1655 mm Spindle configuration: Isdsg Umrmspfx Abxjth Lower horizontal spindle Motor power: 11.0 kW Spindle speed: 6000 rpm Right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 2nd lower horizontal spindle Motor power: 12.0 kW Spindle speed: 8300 rpm 2nd upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 3rd lower horizontal spindle Motor power: 7.5 kW Spindle speed: 8300 rpm SET - UP quick adjustment system Work tables with fine adjustment of all units via Control 100 PC system Axial adjustment range of vertical spindles: 80 mm large tool diameters Pneumatically operated full safety enclosure Feed system with full cardan drive Infinitely variable feed speed Electric height adjustment of the feed system and spindles with independent control Segmented pressure shoes after upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 feeder unit Note for used machines: • Specifications are subject to errors and prior sale. • Listed prices are ex works – free loading! • The machines have been cleaned and function tested. • All machines are sold as seen, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries with your address and telephone number!)

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. Isdpfoc S Di Rjx Abxjth SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: novo, Stable steel and cast iron construction High-precision sliding table made from anodised aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade tiltable to 45° Large outrigger table (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Heavily ribbed jointer tables made of annealed, stress-relieved cast iron for decades of stability and flatness Helically toothed steel feed roller for consistent material feed Three manually adjustable spindle speeds Spindle moulder with forward and reverse rotation Three independent industrial motors Equipped with lockable main switch, motor protection switch, and emergency stop switch Jointer table width: 410 mm Jointer table length: 1810 mm Maximum depth of cut: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum depth of cut: 4 mm Extraction port diameter: 4 x 120 mm Planer cutter block type: TERSA (3 pcs) Cutter block diameter: 72 mm Speed: 5200 rpm Panel saw cutting length: 2250 mm Cutting width with rip fence: 900 mm Maximum crosscut width left of saw blade: 2310 mm Saw blade tilt: 90 – 45° Maximum cutting height at 90°: 90 mm Maximum cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and work table Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Maximum milling tool diameter, retractable/not retractable: 180/210 mm Drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg INCLUDES OPTIONS: - Handwheel with gravity digital readout for thickness table positioning - Sliding table length 2600 mm Itodpfx Aeiiynnsbxsh - Professional fences - 'TERSA' planer cutter block - Spindle moulder with forward and reverse rotation

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Itodpfexy Tmnsx Abxoh Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges Itodpfed Supgsx Abxsh - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Itedpfxefh Tmms Abxoh Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. Ijdpfx Ajxqggcsbxsth • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min/max workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction port: 3 x 160 mm Itsdotwzyfopfx Abxsh Compressed air connection: 6 bar 1st Unit: Sanding roller Rubber-coated 90 Sh Motor power: 11 kW 2nd Unit: Combination unit Rubber-coated sanding roller 60 Sh Rigid sanding pad Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Table extension at outfeed Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location and free loaded. • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and phone number!)

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” Itjdpfeitvkuex Abxsh 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!

Stanje: novo, DMC SD 90 RCS 135 Type “C-Plus” Technical Specifications Usable Working Width: 1350 mm Min./Max. Working Height (with fixed table): 4 – 200 mm Abrasive Belts: 1,370 x 2,620 mm Feed Speed: 3.5–18 m/min Itjdpfxod E Ixze Abxsh Working Units: • “MESAR 46” elastic electronic segmented sanding pad with 46 sectors (30 mm), complete with B/46 workpiece sensing bar at infeed • 1st Position: “RA” angled ribbed steel contact roller D=250 mm • 2nd Position: COMBI with rubber-coated sanding roller D=175 mm, 65 Shore • Floating pressure shoe at 1st position with pneumatic adjustment • 2 grooved rubber-coated pressure rollers at 2nd and 3rd positions • Oscillating blow-off device at 1st and 2nd units • Workpiece cleaning unit with rotating air nozzles Drive: • Motor 1st unit: 18.5 kW • Motor 2nd unit with inverter: 15 kW Table: • Fixed table, working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and conveyor belt, 50 Shore • Vacuum table with integrated electric fan 4 kW in machine base • Variable conveyor belt feed from 3.5–18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit “Pro-Sand” • 10.4" touch screen display • Door with inspection window on operator side for machines with 2 working units • LED interior lighting Note on used machines: • Subject to technical changes and prior sale. • Quoted prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines on location. • Special agreements are only possible in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Technical data: Working width mm: 1,350 Itedpfshtuvrex Abxsh Min./max. working height mm: 4 - 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" helical grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combi: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller-sanding pad unit - Activation of segments via electronic control, which synchronizes their engagement with feed speed and adjusts the number based on workpiece geometry, enabling selection of more or fewer segments to the left and right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into the machine frame Oscillating blow-off unit 2nd unit Touch screen 10.4” display with ‘eye S software integration’ PLEASE NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: novo, Work table dimensions: 2500 x 780 mm Milling spindle diameter: 30 mm Swivel range of the milling spindle: +/- 45.50° Clamping length of the spindle: 140 mm Itsdsd Etkhjpfx Abxoh Max. tool diameter under the table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Electrospindle motor power: 7.50 kW Electrospindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with "Easy Touch 7" electronic control "Flex" milling fence with automatic adjustment via electronic control Spindle forward/reverse operation Extendable table support at the front INCLUDES OPTIONS: - "Fast" table insert with automatic adjustment via 'Easy' control - "LL" version with 2 cast iron table extensions, total length 2500 mm Note on used machines: • Technical data and prior sale subject to change and errors. • Quoted prices are ex-works, loaded free on truck. • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries with your full address and telephone number!)

Stanje: novo, Band saw in compliance with European safety regulations, complete with: - Reinforced grey cast iron table, tiltable Itjdpedibw Aefx Abxjh - Balanced cast iron flywheels - Telescopic blade guard with rack and pinion - Blade tension indicator - Precise upper and lower blade guides - Cleaning brush on the lower flywheel - Sturdy aluminium fences - Max. saw blade width: 16 mm - Extraction below the table, mounted on the machine stand - Micro safety switches on the machine doors Work table dimensions: 600 x 520 mm Work table height: 900 mm Flywheel diameter (cast iron): 450 mm Flywheel speed: 700 rpm Max. cutting height: 300 mm Max. cutting width: 440 mm Min./Max. blade length: 3690 / 3742 mm Min./Max. blade dimensions: 6 x 0.5 / 25 x 0.5 mm Three-phase motor: 3.0 kW, 50 Hz, 400 V Extraction hood diameter: 120 mm

Stanje: zelo dobro (rabljeno), Izjemno stanje: Sandya 1100, preproga in valj kot nova, pnevmatski brusilni čevelj, brezstopenjski pomik. Itjdpjzbct Ijfx Abxjh

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2020, max. dolžina obdelovanca 6360 mm rezkalno vreteno 1 kos glavni motor 13 kW krmiljenje Maestro SCM CNC-obdelovalni center ACCORD 40 FX za okna in vrata ----- IZBIRNO na voljo za doplačilo: obsežen komplet orodja za izdelavo oken in vrat, med drugim (izrezi za okenske profile na zahtevo!): lesena okna IV 68, 78, 92 Ijdpfxjy Hl Iyo Abxeth lesena "stilna" okna les-aluminij okna vhodna vrata dvižno-drsna vrata škatlasta okna Stroj si je še mogoče ogledati v obratovanju! Tehnični povzetek (podrobnejši opis na zahtevo!): ----- - Delovno območje X-Y = 6360x1905 Z = 350 - Avtomatska miza z 8 nosilnimi tirnicami MATIC - L1825 - 5-osno vreteno MAXI - Prisma T, HSK 63 E, 13 kW - RTCP nastavitev – samokalibracijski sistem za delovno enoto Prisma - Čipanec na elektro-vretenu, nastavljiv - Priprava za kotni prenos "Prisma T-S" - BRC delovna enota: žagin list za čelno obdelavo, 1 priključek za rezkar, vertikalno 3 vertikalne neodvisne vrtalne glave, razmak 32 mm 3 vertikalne vrtalne glave (med seboj niso neodvisne), razmak 21,5 mm, za izvrtino za kljuko 4 horizontalne vrtalne glave (po 2 na stran, med seboj niso neodvisne), razmak 21,5 mm 2 horizontalni rezkalni glavi (po 1 na stran) - TRC 48 – zadnji skladiščni magazin za orodja 48 mest za orodja (brez orodnih držal) razmak med mesti 104 mm maks. premer orodja 350 mm maks. dolžina orodja 320 mm maks. teža posameznega orodja 10 kg (15 kg z vretenom HSK 63 E) maks. skupna teža v magazinu 250 kg - MACH 5 – hitromenjalnik: omogoča menjavo orodja na elektro-vretenu v samo nekaj sekundah. - Nihajno delovanje (pendel način) - Samodejno mazanje osi - upravljalska konzola eye-M z integriranim PC-jem - dodatna fiksna upravljalska konzola - TECPAD – daljinsko upravljanje funkcij stroja - Priprava za vpenjalke H145 na delovno mizo z 8 tirnicami - Sprednja linija prislonov H110 za delovno mizo 8 tirnic - Zadnja linija prislonov H110 za delovno mizo 8 tirnic - Sesalci H110 145x145 mm - Sesalci H110 145x55 mm, vrtljivi - Sesalci H110 180x65 mm, vrtljivi - Prva stranska linija prislonov H145 za delovno mizo z 8 tirnicami - Druga stranska linija prislonov H145 za delovno mizo z 8 tirnicami - Vpenjalke H145 z okroglo osnovo - Vpenjalke H145 s kvadratno osnovo - 6 dvigovalnih enot z dvojnim hodom H145 - Laser in referenčni prislon H145 za lok (levo) - Varnostni sistem PRO-SPEED - Maestro cnc – vmesnik za upravljanje in programiranje stroja - Maestro pro view – simulacijska programska oprema Prodaja orodij v stanju, obsegu in z dodatki, kot so na zalogi v našem skladišču. Opomba glede izrezov za okna, risb orodij in seznamov orodnih sistemov: Podjetje Engelfried ne prevzema nobenega jamstva, da se dejansko prisotna orodja ujemajo z navedenimi ali narisanimi sistemi. (tehnični podatki po navedbah proizvajalca – brez jamstva!)

Stanje: rabljeno, Leto izdelave: 2008, Rabljeni stroj Leto izdelave: 2008 Itsdpfow Nadgox Abxjh Stanje: trenutno še v proizvodnji Oprema in tehnični podatki: Lepljenje max. 8–55 mm Vklj. z vrtljivim upravljalnim pultom HF-spojni agregat z dvema motorjema Vklj. z izmenljivim hitrogrelnim bazenom, teflonsko prevlečenim Vklj. z elektronskim pozicioniranjem pritisnih valjev Vklj. z nagibnim dvojnim čelilnim agregatom Vklj. z izravnalnim rezkalnim agregatom Vklj. z agregatom za posnemanje posnetja, radija in vogalov z nesting paketom Vklj. z radijskim vlečnim nožem z nesting paketom Vklj. z ravninskim vlečnim nožem Vklj. z utornim agregatom Vklj. z polirnim agregatom Vklj. z razpršilno enoto Razpoložljivost: kmalu Skladišče: Flörsheim

Stanje: rabljeno, številka stroja/vozila: 008350, Tip nameščenega roba: tanka obloga, močna obloga, masiven les Iedpfex A Tgyjx Abxsth Sistem lepljenja: PUR Spojnično rezkanje: da Multifunkcijska enota: da Maksimalna hitrost podajanja: 20 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 7 št.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Šestvretenska skobeljna "SCM" model SUPERSET XL V380/50 - "CE" RABLJENA - ZELO DOBRO OHRANJENA, ŠE V DELOVANJU [ID: cvn-088] - 6 vreten: SPODAJ/DESNO/LEVO z CNC/ZGORAJ/SPODAJ/UNIVERZALNO - Delovna širina: 230 mm - Tandemska naprava za kratke kose Itedpsy T Ndljfx Abxoh - Motovariator hitrosti - POPOLNA Z REZKAMI Na voljo do prodaje.

Stanje: dober (rabljeno), Koda: 0299 Znamka: SCM Model: S 630/E - CE standard Avtomatski debelinski skobeljni stroj za mizarske delavnice, izdelavo pohištva po meri, lesena okenska okna, lesno mizarstvo, žage, plastiko, kompozitne materiale in razne druge namene - CE standard Tehnični podatki: Ijdpfxsyi E T To Abxsth Elektronska nastavitev višine mize Pnevmatska nastavitev pritiska valjev Pogonski sistem s 3 velikimi motoriziranimi zgornjimi valji - enostavno zamenljivi Elektronski variator hitrosti podajanja 4/20 m/min Dimenzije delovne mize: 630 x 1000 mm Maksimalna delovna širina: 630 mm Minimalna/maksimalna delovna višina: 3/300 mm Minimalna delovna dolžina: 260 mm Število nožev: 4 Motor: 7,5 KM Motor podajanja: 2 KM Premer sesalne cevi: 150 mm Skupne dimenzije (mm): 1360 x 1080 x 1220 (v) Teža: 1000 kg

Stanje: dober (rabljeno), Koda: 0260 Blagovna znamka: DMC SCM GROUP Model: UNISAND 2000 - CE standard Samodejni širokopasovni brusilni stroj z dvema vzdolžnima enotama in eno prečno enoto na vhodu, namenjen za brušenje pohištva, stavbnega pohištva, pohištva po meri, plošč, lesenih vrat, okenskih okvirjev, polizdelkov in raznovrstnih lesenih elementov – skladno s CE standardom. Tehnični podatki: Iedpex Dm Tvjfx Abxoth Največja delovna širina: 1350 mm Najmanjša delovna širina: 52 mm Najmanjša dolžina obdelovanca: 400 mm Delovna višina (min./maks.): 4/170 mm Dovod traku z motorjem s spremenljivo hitrostjo Dolžina brusnega traku (vzdolžni): 1370 x 2620 mm Dolžina brusnega traku (prečni): 150 x 6550 mm Dolžina lamelarnega traku: 140 x 6300 mm Avtomatsko centriranje traku Avtomatsko pozicioniranje mize Digitalni prikaz delovne debeline Krmilna plošča z membransko tipkovnico, odporno proti prahu Elektronski sistem za nihanje traku Pritisni valji prevlečeni z gumo Avtomatsko centriranje traku 1. Skupina: Prečna brusna blazinica z dolžino 6550 mm, opremljena z lamelarnim trakom, ki zagotavlja stabilnost in odlično napetost brusnega traku Sekcijska elektronska blazinica "EPICS" z elektronskim nadzorom "HYDRA" s 46 sektorji, razmik med sektorji 30 mm LED zaslon omogoča preverjanje delovanja aktiviranih sektorjev blazinice Enota je opremljena z izpihovalci za čiščenje brusnega traku Dvomotorna moč: 12/15 kW Premer odsesovalne kapuce: 160 mm Kombinirana vzdolžna kalibracijska/brusilna skupina z jeklenim valjem in sekcijsko elektronsko blazinico "EPICS" s 46 sektorji in razmikom 30 mm Pregradna pregrada s 46 sektorji Mere brusnega traku: 1370 x 2620 mm Premer valja: 220 mm Moč motorja: 15/18,5 kW Oscilacijski izpihovalci z elektronskim nadzorom Sekcijska elektronska brusna blazinica "EPICS" s 46 sektorji in razmikom 30 mm Pregradna pregrada s 46 sektorji Moč motorja: 15 kW Oscilacijski izpihovalci Satinirni valj Scotch Brite Premer: 150 mm Moč motorja: 3 kW Premer odsesovalne kapuce: 160 mm Vakuumska miza Elektronsko krmiljenje HYDRA 35 Kompresiran zrak: 8 bar Skupne dimenzije sestavljene naprave: 3200 x 2900 x 2400 (V) mm Dimenzije za transport: 3200 x 2300 x 2400 (V) mm Teža: 4400 kg

Stanje: dober (rabljeno), Koda: 0292 Znamka: SCM MINIMAX Model: FORMULA F1 - CE standard Skobeljni stroj za obdelavo lesa, plastike, kompozitnih materialov in drugih – CE standard Tehnični podatki: Itodpeyhp S Refx Abxjh Delovna širina: 410 mm Dolžina mize: 2610 mm Število nožev: 4 Premer vretena: 120 mm Hitrost vrtenja vretena: 5000 rpm Vodilo nastavljivo od 90° do 45° Največji odvzem na prehod: 8 mm Moč motorja: 5,5 KM Višina mize od tal: 845 mm Premer priključka za odsesavanje: 120 mm Skupne dimenzije: 2610 x 900 x 1070 mm (višina) Teža: 575 kg

Stanje: dober (rabljeno), Koda: 0098 Znamka: MINIMAX SCM Model: LS 3000 - CE standard Tračna brusilnica z dvojnim labodjim vratom - s 3 motorji - CE standard Dolžina mize mm 3000 Širina mize mm 1100 Samodejni hod dviga mize mm 580 Motor traku z dvema hitrostma Dolžina brusilnega traku mm 8100 Itedpfx Aey Au Diebxjh Premer kolutov mm 250 Širina traku mm 150 Ročna podložka mm 150 Globina labodjega vratu mm 820 Skupne mere: mm 4150 x 1500 x 1600 v Teža kg 485

Stanje: dober (rabljeno), Kód: 0321 Znamka: SCM Model: MULTIFLEX C - CE Standard Iedeytn U Iepfx Abxsth Avtomatski delovni center za izdelavo okenskih okvirjev za čepovanje, profiliranje in konturiranje – maks. debelina obdelovanca 140 mm – CE standard Tehnični podatki Avtomatski voziček z zagozdilcem Maks. delovna dolžina: 2800 mm Min./maks. debelina obdelovanca: 30/140 mm Premer žage za odrezovanje koncev: 400 mm – motor 4 KM Uporabna dolžina čepilnega vretena: 320 mm – motor 10 KM Premer vretena: 50 mm Maks. premer orodja: 350 mm Profilirna vretena: 1. proticepilno profilirno vreteno – dolžina 320 mm – motor 7,5 KM – premer orodja 220 mm 2. profilirno vreteno – dolžina 320 mm – motor 7,5 KM – premer orodja 220 mm Min. in maks. premer orodij profilnih vret: 100/220 mm Premer profilnih vreten: 50 mm Orodna skupina: Zuani Spremenljiva hitrost pomika Skupina za vračanje zasteklitvenih letvic – motor 3 KM – premer odsesovalnega priključka 50 mm Skupne mere: 2400 x 3300 x 2000 mm (v x š x g) Teža: 2200 kg