Scm Si 400 Ep Class nakup rabljenega (612)

Stanje: zelo dobro (rabljeno), Formatna žaga SCM SI 400 EP Nedey Rzphjpfx Afmecu Voziček 320 cm, Nagib 0-45 stopinj motorizirano nastavljiv Gor-dol lista motorizirano nastavljivo, Ograja na desni strani motorizirano nastavljiva do 1500 mm, Predrezovalnik ročno nastavljiv, Motor 9 kW, 3 hitrosti vrtenja, Maks. premer lista 400 mm, Ograja na vozičku nastavljiva pod kotom Rabljeni stroj, v zelo dobrem stanju.

Stanje: novo, Standard equipment and accessories - 10-year warranty on the saw carriage guide system - Saw carriage with anodized aluminium profile, guide made of hardened, ground and rolled-in steel tracks - Saw carriage length: 3200 mm - "READY" electronic control, 2-axis control (3rd axis available upon request) with: - Height adjustment and tilt of the saw unit (parallel fence control on request) - Tool data management with automatic correction of cutting height relative to the saw blade tilt angle - Manual, semi-automatic, and automatic modes with 99 storable work programs - Additional functions: calculator and operating hours counter - Framing table for quick positioning of the fence for mitre cuts - Outfeed table extensions - Cutting length on rip fence 1270 mm - 2-axis control with 99 programs Motor 7 kW 50 Hz (8 kW 60 Hz) - Motor with direct connection and push buttons - Three main saw blade speeds - Scoring unit with independent motorization, externally adjustable, and stops for easy saw blade positioning Safety/Protection - Emergency stop button at the front - Emergency stop button at the parallel fence area (CE version) - Thermal protection switch - Pendulum blade guard (CE version) with integrated extraction, extraction port diameter 80 mm - Pendulum blade guard with integrated extraction, extraction port 80 mm diameter - Automatic motor brake on main saw blade (CE version) - Lockable main switch - 110 V auxiliary circuit - CE declaration of conformity (CE version) Technical data Maximum cutting height at 90° (mm): 140 (with 400 mm blade) Maximum cutting height at 45° (mm): 97 (with 400 mm blade) Saw blade tilt (degrees): 45 Lifting and tilting of saw unit: programmable Saw blade speed (rpm): 3000 / 4000 / 5000 Scoring blade speed (rpm): 8500 Main motor power (S6 -40%) kW (HP), 50 Hz: 7 (9.5) Scoring unit power (S6 -40%) kW (HP), 50 Hz: 1.3 (1.7) Panel cuts: - with carriage 1600 (mm): n.a. - with carriage 3200 (mm): 3200 x 3200 Rip capacity (mm): 1270 Extraction port diameter: - frame (mm): 120 - saw blade guard (mm): 80 - riving knife (mm): n.a. Net weight, base machine (kg): 1050 109999 Version according to safety regulations R10078 nova si 400ep CE version 930731 Voltage: 400V EU 931201 Frequency: 50 Hz 570343 Digital display for rip fence Complete with: - Digital display and magnetic tape 570133 Motor 9 kW 50 Hz (11 kW 60 Hz) with automatic star/delta switch, 9 kW 12 HP 50 Hz (11 kW 15 HP 60 Hz) 083202 Base frame Nsdovxr Skjpfx Afmjcu 109993 MACHINE LANGUAGE: German

Stanje: rabljeno, težka precizna formatna krožna žaga SCM SI 550 E Class Različica: tesarstvo - mizarstvo Dolžina reza: 3200 mm Širina reza: cca 1500 mm Glavni motor: 11 kW 3 hitrosti: 2500/3000/4200 o/min Kotni prislon z dolžinsko kompenzacijo Žagin list do Ø 550 mm Ncodpfx Afjzb Ig Hjmeu Električno dvigovanje in nagibanje žaginega lista z digitalnimi prikazi Stroj iz upokojitve / prva dostava 2011 Stroj delavniško pregledan, v VRHUNSKEM STANJU Na zalogi v Liebochu

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: AB/139264, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, izvrtina žagine plošče: 30 mm, največja hitrost vrtenja: 5.000 obr/min, KROŽNA FORMATIRNA ŽAGA SCM MOD. SI 400 N - V SKLADU S CE Nedpfx Aozcn U Tofmocu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, moč: 2,21 kW (3,00 KM), vhodna napetost: 400 V, vhodni tok: 19 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, največja višina reza: 140 mm, največja širina rezanja: 1.270 mm, premer žaginega lista: 400 mm, nastavitev nagiba žaginega lista: 45 °, vrsta nastavitve višine: mehanski, izvrtina žagine plošče: 30 mm, vrsta aktuacije: električni, največja hitrost vrtenja: 3.700 obr/min, skupna dolžina: 3.200 mm, skupna širina: 5.155 mm, skupna višina: 1.550 mm, skupna masa: 691 kg, višina mize: 900 mm, Oprema: CE označba, dokumentacija / priročnik, zaščitni pokrov žaginega lista, Leto izdelave 2022 Motor 9 kW Zarezovalnik Plošča do dolžine 3,2 m PrečnI vodilo z 2 digitalnima prikazovalnikoma Paralelno vodilo z 1 digitalnim prikazovalnikom Nodpfxey Shx Se Afmjcu Odlično stanje

Stanje: novo, Leto izdelave: 2026, Format Circular Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tiltable saw blade and format sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net) approx. 690kg Extraction Connection Extraction nozzle diameter: 120mm Extraction nozzle diameter (blade guard): 80mm Electrical Data Connection voltage: 400V Mains frequency: 50Hz Scoring motor power: 0.65kW Output power (main motor): 7.0kW Rated duty type main drive: S6 Duty cycle main drive: 40% Sliding Table and Worktable Nedpfexw N N Hox Afmjcu Sliding table length: 3200mm Sliding table width: 360mm Sliding table height: 175mm Table length: 1000mm Table width: 560mm Table height: 900mm Saw Unit Cutting width with rip fence: 900mm Max. cross-cut width left of saw blade: 3200mm Edging length: 3200mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136mm Max. cutting height at 45°: 97mm Max. cutting height explanation: independent of scoring blade Saw blade diameter: 400mm Saw blade diameter explanation: independent of scoring blade Saw blade speed: 3500/5000rpm Scoring Unit Scoring blade diameter: 120mm Scoring blade speed: 9200rpm FEATURES Equipment Scoring unit with separate motor Anodized aluminium sliding table Handle for sliding table On/Off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Saw rip fence with round bar guide Stops: Two professional foldable stops Edging shoe Eccentric clamp Table extension Table enlargement Saw blade swing-away guard Height adjustment and tilting of saw unit: motorized, digital display for tilting Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and format sliding carriage made from anodised aluminium Article number: 5504932 Brand: Holzkraft Solid worktable made from heavily ribbed grey cast iron – for maximum stability and durability Robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation Precision format sliding carriage made from anodised aluminium – smooth running on high-quality ball contact system Carbide guide rails – for long-term precision and minimum maintenance Tilting grey cast iron saw unit with double segment guide – accurate zero-point tilt for highest cutting precision Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding carriage – for fast and precise mitre cuts Ncsdpfx Ajxw N Sbjfmou Scoring unit with powerful separate drive motor Equipped with high-quality squaring frame – with robust telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading, and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and weights Weight (net) approx. 670kg Extraction connection Extraction port diameter: 120mm Extraction port diameter (saw blade guard): 80mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Scoring motor power: 0.65kW Output power (main motor): 7.0kW Rated operating mode main drive: S6 Duty cycle main drive: 40% Sliding carriage and table Format sliding carriage length: 3200mm Format sliding carriage width: 360mm Format sliding carriage height: 175mm Table length: 1000mm Table width: 560mm Table height: 900mm Saw unit Cutting width with rip fence: 900mm Max. crosscut length left of saw blade: 3200mm Squaring length: 3200mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136mm Max. cutting height at 45°: 97mm Note max. cutting height: independent of scorer Saw blade diameter: 400mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000rpm Scoring unit Scoring blade diameter: 120mm Scoring blade speed: 9200rpm Equipment Scoring unit: with separate scorer motor Anodised aluminium format sliding carriage Sliding carriage handle Squaring frame Material roller on squaring frame Rip fence: with round bar guide Stops: Two professional folding stops Squaring shoe Eccentric clamp Table extension Table enlargement Saw blade pendulum guard Height adjustment and tilting of the saw unit: manual Location: ex stock 54634 Bitburg - available immediately -

Stanje: novo, Technical data: Max. saw blade diameter: 400 mm Min. saw blade diameter: 250 mm Saw spindle diameter: 30 mm Scoring blade diameter: 120 mm Scoring spindle diameter: 20 mm Scoring unit on separate motor Manual height adjustment of saw blade Tilting saw blade from 0° to 45° Manual tilt angle adjustment of saw blade Carriage length: 3,200 mm Carriage lock Worktable dimensions: 1,450 mm x 1,030 mm Table height: 920 mm Table extensions: 2x Rip fence Guard Emergency stop switch Power supply: 380 V Main motor power: 7 kW Overall dimensions: Length: 3,430 mm Width: 1,900 mm Nodpev S Uz Isfx Afmscu Height: 1,560 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Holzkraft formatna krožna žaga Si 400 es Letnik 2019 Dimenzije mize 940 x 560 mm Višina mize 900 mm Dolžina obrezovanja 3200 mm Dimenzije formatnega vozička 360 x 142 x 2600 mm Maks. višina reza 90°/45° s predrezom 138 / 98 mm Maks. dolžina reza levo od žaginega lista 3260 mm Širina reza s paralelnim prislonom 1270 mm Nagib žaginega lista 90° - 45° Maks. premer žaginega lista Ø 400 mm Premer predreznega lista Ø 120 mm Hitrost vrtenja glavnega lista 3500/5000 min-1 Hitrost vrtenja predreznega lista 9200 min-1 Ncedsyyax Hepfx Afmou Moč motorja 400 V / 50 Hz / S6 - 40% 7 kW (9,5 KM) Moč motorja predreza 0,55 kW (0,75 KM) Premer odsesovalnega priključka 120 mm Premer odsesovalnega priključka zaščite lista 80 mm Teža cca 680 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, številka stroja/vozila: AB141760, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), največja širina rezanja: 1.500 mm, širina reza pri vzporednem vodilu: 1.500 mm, dolžina pomične mize: 3.200 mm, Oprema: dozator, SCM panel saw, model SI 400 E Nsdstwp Epepfx Afmjcu Connection voltage: 380V Main motor: 7.5 kW Scoring motor: 0.75 kW Sliding table length: 3,200 mm Cutting width: 1,500 mm Table extension: 840 x 320 mm Parallelogram guard with wide and narrow hood Scoring unit with manual adjustment Electrical height adjustment Electrical tilting with Siko display Extraction port: 1x100 mm, 1x120 mm

Stanje: novo, Leto izdelave: 2025, FS 41 Classic Tersa – Surface and Thickness Planer with TERSA Quick-Change Cutterhead System Equipped with a TERSA cutterhead for tool-free, seconds-fast knife changes The TERSA blade system enables exceptionally quiet operation Helically serrated steel feed roller for consistent and even wood feed Extra-long one-piece surfacing tables ensure accurate and easy planing of workpieces Large tilting fence can remain in its set position when opening the surfacing tables Surfacing tables open towards the rear High machine weight guarantees maximum precision and smooth running Powerful industrial motor Durable steel and cast iron construction Nedocnxayjpfx Afmecu Model: FS 41 Classic Tersa Article no.: 5503414 Technical Specifications --- Surfacing Specifications --- Total table length: 1800 mm Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. cutting depth: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./Max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter / knives: 72 mm / 3 pcs Cutterhead speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa Cutterhead System No more adjustment or screwing Knife change in seconds Self-locking Exceptionally quiet operation Safety Features Heavy-duty anti-kickback devices prevent workpiece kickback 3-knife Tersa cutterhead for optimal planed finish Wood Feed System Helically serrated steel feed rollers ensure consistent and even material feed without markings 13 teeth engage simultaneously for powerful feed Maintenance-free, unlike rubber feed rollers Extraction Hose Connection Extraction ports for both surfacing (1) and thicknessing (2) are oriented in the same direction Hose connection accessible from one machine side only No hose routing required around the machine

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, ST 3 classic F 23 – Combined Saw and Spindle Moulder Featuring tilting saw blade, tilting spindle moulder, and anodized aluminium sliding table Robust steel and cast iron construction Large support surface and precise cast iron table High-precision sliding table made of anodized aluminium (travel distance 2250 mm) Large outrigger (900 x 600 mm) with extendable aluminium telescopic fence Max. saw blade diameter 315 mm with scoring unit, tilting from 90° to 45° Saw rip fence with fine adjustment Stable saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 manually adjustable spindle speeds from 3,500 – 10,000 rpm Spindle moulder with forward/reverse rotation Standard arc-shaped spindle guard Two 5.0 kW motors with high performance reserves Cast Iron Spindle Moulder Unit secured at the top on both sides precision ball bearings at the top close to the pivot point four optimally graduated spindle speeds allow for sharpening of workpieces Powerful Motors Industrial motor, 100% duty cycle for continuous operation at full load Scope of Delivery: Arc-shaped spindle guard Anodized aluminium sliding table Aluminium fence jaws Folding stops Technical Data Cast iron table dimensions: 1112 x 430 mm Edging length: 2250 mm Max. saw blade diameter with/without scorer: 315 mm Max. cutting height at 90°/45°: 100/70 mm Max. crosscut length: 2660 mm Saw blade tilt: 90° - 45° Cutting width: 900 mm Speed: 4000 rpm Table router: - Spindle tilt: 90° - 45° Useable spindle length: 100 mm Max. tool diameter: 210 mm Max. tenoning tool diameter: 275 mm Max. tool diameter, retractable: 180 mm Speeds: 3,500/7,000/10,000 rpm General: - Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) Weight: 470 kg Extraction ports diameter: 2 x 120 mm Saw blade guard extraction port diameter: 60 mm Ncsdpecnwydjfx Afmju Location: From stock, 54634 Bitburg - Immediately available -

Stanje: zelo dobro (rabljeno), Formatna žaga SCM Si400e 9/24 Tehnični podatki: Dolžina vozička: 3200 mm Električno nastavljanje kota žage Električno dvigovanje žage Električno nastavljanje desnega prislona Ncjdpfow Rkz Sex Afmsu Širina reza na desni: 1270 mm Maksimalna višina reza: 130 mm Obrati žage nastavljivi prek jermena Obrati predreza: 6500 obr./min Zaščitni pokrov Varnostno stikalo Moč glavnega motorja: 5,5 kW Moč motorja predreza: 0,75 kW Skupne dimenzije: Višina: 1400 mm Širina: 4300 mm Dolžina: 3550 mm

Stanje: novo, - NEW - Description Cutting plane directly at the saw blade Heavy-duty steel cast iron construction Precision-guided sliding table made of aluminum, anodized as standard Large support table on telescopic arm, longitudinally adjustable Extendable aluminum telescopic fence, angle-adjustable with professional fence stoppers Parallel fence with quick-lock and fine adjustment Large, milled cast iron working table remains permanently flat Standard table extension and table enlargement enable easy processing of larger workpieces Smooth running and precise cuts Equipped with a powerful three-phase motor The large-dimensioned saw unit made from cast iron is double-mounted on the cast table, ensuring stability, precision, quiet operation, and long service life Maximum cutting height is achieved even with scoring unit installed Equipment features: Double trunnion saw unit Large, made of steel/cast iron Close to the saw blade, mounted on both sides for precision, smooth running, and long service life Height and tilt (up to 45°) adjustable via hand crank Maximum cutting height is achieved even with scoring unit installed Also available with scoring unit Telescopic fence Extendable telescopic fence up to max. 2550 mm Angle-adjustable With professional fence stoppers Ncedpfx Asvyuqfjfmou Aluminum sliding table Equipped with the proven ball contact system Dust and dirt resistant due to minimal contact point between ball and trapezoidal rail 10-year Holzkraft warranty on wear of the guide rails Parallel fence with round bar guide With fine adjustment and quick lock Stable round bar guide made of precision-ground steel, 45 mm diameter Foldable as standard for cutting large workpieces Technical Data: Dimensions and Weights Net weight approx. 380 kg Extraction connection Suction port diameter 120 mm Saw blade guard suction port diameter 60 mm Machine body length 1388 mm Working area length 1000 mm Machine body width/depth 689 mm Working area width/depth 2000 mm Required space length 5118 mm Required space width/depth 3830 mm Electrical Data Connection voltage 400 V Drive motor power 5.0 kW Phase(s) 3 Ph Rated duty cycle S6 Current type AC Duty cycle 40 % Mains frequency 50 Hz Sliding table and table Sliding table length 2250 mm Table length 840 mm Sliding table width 270 mm Table width 560 mm Sliding table height 124 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. cutting height 90° 90 mm Max. crosscutting width to the left of blade 2310 mm Max. cutting height 45° 63 mm Edging length 2250 mm Saw blade diameter 315 mm Saw blade tilt 90 - 45° Saw blade speed 4000 rpm Item No. 5504323

Stanje: rabljeno, Leto izdelave: 2000, Used machine Year of manufacture: 2000 Special SCM guide system for the saw carriage. The arch-shaped interaction between the balls and running guides, as well as the hardened contact surfaces, ensure exceptional and consistent precision. The scorer can be easily swung in and out from the outside; a special plate allows for precise positioning. The fence is extremely robust and suitable for both rip cuts and angled cuts; rapid return to the starting position. The precise flip stops allow direct reading of measurements along the entire length. Table dimensions: 830 x 1200 mm Saw carriage: 1500 x 290 mm Cutting length: 1500 mm Saw blade tilt: 45° Max. main saw blade diameter: 300 mm Max. scoring saw blade diameter: 100 mm Max. cutting height at 90°: 95 mm Max. cutting height at 45°: 67 mm Saw blade speed: 4000 rpm Scoring saw speed: 8000 rpm Cutting width with parallel fence: 1000 mm Extraction port diameter: 100 mm Motor: 4 kW Nodpfx Ajy Nugdefmscu Weight: 425 kg Availability: short-term Location: Röllbach

Stanje: novo, Massive work table made from heavily ribbed grey cast iron Robust base frame constructed from welded steel Precision sliding table made of anodised aluminium Carbide guideways – ensure long-term precision and minimal maintenance of the sliding table Tilting saw unit made of cast iron, featuring double segment guidance Heavy-duty rip fence with round bar guide Integrated mitre cutting device on the sliding carriage Scorer unit with its own powerful drive motor (optional) Ncjdpfx Afjit I Sbsmeu Equipped with high-quality squaring frame & telescopic fence, integrated roller, inclined scale, and a practical eccentric clamp Saw blade speed adjustable in two stages (from above, work table with removable insert) Includes pendulum blade guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR RIP FENCE Max. cutting height at 90° (mm): 140 with 400 blade Max. cutting height at 45° (mm): 100 with 400 blade Saw blade tilt (degrees): 90 / 46 degrees Saw blade lifting and tilting: manual Saw blade speed (rpm): 3,500 / 5,000 Main motor power (kW) 50 Hz: 7.5 Scorer motor power (kW) 50 Hz: 1.3 Scoring blade speed (rpm): 9,200 Cutting capacity, format (mm): 3200 x 3200 Rip cutting width (mm): 1,270 Extraction port diameter (mm): 120, 60

Stanje: rabljeno, številka stroja/vozila: 008116, Maks. višina obdelave: 120 mm Ncedew Iddzepfx Afmsu Maks. podajalna hitrost: 25 m/min Število delovnih vreten: 6

Stanje: rabljeno, Leto izdelave: 2016, MORBIDELLI AUTHOR M400 KEY FEATURES 5-AXIS MACHINING UNIT "PRISMA": QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL SOFTWARE XILOG MAESTRO: EXTREMELY SIMPLE PROGRAMMING "MATIC" WORKTABLE: ONE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Working area X-axis (infeed side): 3,680 mm Working area Y-axis (max. workpiece size on rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length in pendulum operation: 1,650 mm Travelling speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min INSTALLATION Installed power: 62 - 82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Ncjdpfx Ajy Dta Ssfmeu Extraction air velocity: 25 m/s Extraction outlet diameter: 250 mm GENERAL FEATURES CNC-controlled drilling and milling centre in gantry design with workpiece supports, capable of: - Vertical drilling on panel surface - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General 3-4-5 axis milling operations MACHINE STRUCTURE The base is a monolithic construction of thick-walled steel, additionally reinforced across the entire bed with welded stiffeners, ensuring extreme stability. The table shape, with a large base, is key to guaranteeing long-term precision and stability. The machine’s layout allows the user optimal workflow with minimal footprint. The mobile gantry is constructed as a solid monoblock and moves in the X-axis on prism-ground guides with ball-bearing carriages. The machining unit is also mounted on prism-ground guides and ball-bearing carriages on this mobile unit. AXIS MOVEMENT All axes travel on large-section prism linear guides with ball-bearing shoes for maximum contact area, ensuring optimal running even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved with helical rack and pinion drive. Large-section ball screws ensure precise positioning of the machining unit along the moving gantry (Y and Z axes). DRIVES, MOTORS, AND INVERTERS Perfect mechanical dynamics and highest positioning accuracy are ensured by high-quality drives and brushless motors capable of speeds up to 90 m/min, while maintaining optimum finish quality. CONTROL The control system consists of a numerical control unit for milling and drilling operations with the "Xilog Maestro" graphic user interface based on Windows 7 Office OS, 17" LCD color display, QWERTY keyboard, swiveling operator panel, and machine operator interface with Xilog Maestro software. Xilog Maestro Features Programming: - Parametric graphical programming - Import of DXF files (2D; geometries: "SPLINE", "POLYLINE 3D", line or circle interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aides for drilling and milling operations - Automatic optimization of drilling operations and tool-change cycles - Option to shift panel zero-point for drilling on inclined or curved panel edges

Stanje: dober (rabljeno), Naprodaj je rabljena formatna krožna žaga SCM z dolžino reza 3000 mm. Stroj je bil pregledan in obnovljen s strani naše servisne ekipe in je v dobrem stanju. Tehnični podatki: - Dolžina reza: 3000 mm - Širina reza: 600 mm - Višina reza: 135 mm - Maksimalni premer žaginega lista: 400 mm - Premer odprtine za odsesavanje: 120 mm - Moč motorja: 5,5 kW / 7,5 KM Žaga se nahaja v A-5431 Kuchl in si jo je mogoče ogledati kadarkoli v našem delovnem času. Vmesna prodaja pridržana! Ncedpfx Asza Dqfefmsu Sorodni izrazi: žaga, krožna žaga, formatna žaga, formatiranje Referenca: R-A0074

Leto izdelave: 2025, stanje: novo, Nova stroj Leto izdelave 2025 Oprema in tehnični podatki: L'invincibile SI X - FORMATNA KROŽNA ŽAGA Z DVOJNIM NAGIBOM LISTA 931201 Frekvenca 50 Hz 570348 Predrezalna enota z neodvisnim motorjem 570351 LED osvetlitev predrezalnega območja Ncodjx Enrxepfx Afmou 530130 "Full Support & Wireless" 570353 Podaljšek z valjčno progo na paralelni strani 080999 Prosto iz tovarne R01264 L'invincibile SI X izvedba CE 083202 Podstavek 109993 JEZIK STROJA: nemščina 930731 Volt 400 EU 080685 Dodatna embalaža 109999 Standardni varnostni predpisi Številka artikla: SI X Različica: R021401 Razpoložljivost: po dogovoru Lokacija: Flörsheim

Stanje: dober (rabljeno), Koda: 0400 Blagovna znamka: SCM GENIUS Model: M 10/SI Univerzalni šestoperacijski kombinirani stroj s tremi motorji za obdelavo lesa, mizarska dela, izdelavo pohištva, pohištvo po meri, izdelavo okenskih in vratnih okvirjev ter različnih vrat. Tehnične specifikacije: Trifazni motorji V.380/50 Skobeljni stroj: Skupna dolžina miz 1400 mm Širina mize 300 mm Število nožev: 3 Motor: 3 KM Debelinka: Največja širina skobljanja: 300 mm Največja debelina skobljanja: 150 mm Hitrost podajanja: 7 m/min Dvig miz ročno z ročnim kolesom Krožna žaga: Največji premer žaginega lista: 250 mm, luknja 20 mm Največja višina reza: 85 mm Največja širina reza: 700 mm Ncsdezbu Azjpfx Afmsu Nagib rezila: 0–45° Motor: 2 KM Formatna žaga: Drogasta drsna miza pritrjena na pomičen vodilni drog Vretenski rezkar: Premer vretena: 30 mm Navpični hod: 120 mm Hitrosti vretena: 3000/4500/6000/7500 vrt/min Največji premer orodja: 150 mm Največja izstopnost vretena nad mizo: 100 mm Motor: 2 KM Dleto stroj: Dimenzije mize: 200 x 400 mm Vreteno: 0–16 mm Vzdolžni pomik: 150 mm Prečni pomik: 90 mm Navpična nastavitev z ročnim kolesom Skupne mere sestavljenega stroja: 2000 x 1400 x 860 mm (višina) Teža: 450 kg

Stanje: rabljeno, Leto izdelave: 1994, Motor 6 / 7,5 kW s 4-valjnim podajalnikom, fiksne podajalne hitrosti. Razširitve hitrosti. Višina delovne mize: 920 mm. Nagib vretena: -10° do +45°. Največji izteg vretena nad mizo: 175 mm. Hitrosti vretena: 3250/6500-5000/10000 obr/min. Največji premer orodja: 250 mm. Teža: ca. 950 kg. Lokacija skladišča: Nattheim. Ncedpfx Afsw Enw Ismou

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic adjustment of the scorer unit Automatic rip fence with adjustment via lead screw and linear ball bearing guide Parallelogram support table for miter cuts Nedpfxoyftzkj Afmjcu Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis, with fine adjustment. Angle detection system via magnetic strip and LCD display. Crosscut fence with 3 LCD displays Extendable support table with roller support Technical data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scorer blade diameter mm: 120 Panel cuts with extendable stop mm: 3200x3200 Saw blade tilt range degrees: 0° / +46° Max. saw blade cutting height at 90° mm: 150 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scorer speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scorer unit power Hz 50 kW: 0.75 Cutting width with rip fence mm: 1270 Weight approx. 1180 kg Used machinery notice: • Technical data subject to errors and prior sale. • Prices quoted are ex-location, free loading! • The machine has been cleaned and function-tested. • All machines are purchased as inspected, with no warranty claims whatsoever. Buyers are invited to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address & telephone number!)

Stanje: novo, Equipment: 5-axis electronic control Ncedpfx Afjcrnm Njmeu Swivelling control panel above the table Electronic adjustment of the scoring unit Automatic rip fence with screw adjustment and linear ball bearing guide On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Panel cutting capacity with extendable fence mm: 3200x3200 Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Cutting width with rip fence mm: 1500 Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife

Stanje: novo, Saw unit swivels 46° to both sides. Programmable, electric saw blade adjustment. Control unit with electronic display for saw blade tilt and height. Gray cast iron saw unit ensures torsional rigidity and vibration-free operation. Easy panel handling thanks to large squaring frame with roller. Telescopic fence with 2 professional flip stops. Outstanding cutting precision – sliding table guided by a highly precise, time-proven ball contact system for smooth operation. Scoring unit features its own drive and is easily adjustable from outside. Saw unit accommodates saw blades up to 400 mm diameter. Scoring blade diameter: 160 mm. Two-position manually adjustable saw blade pendulum guard. 3-axis control. Motorized parallel fence with electronic position control. Includes: - Position display via encoder - Adjustment via ball screw spindle - Stepless setting via switch or automatic positioning system - Incremental adjustment capability - Swiveling fence retraction below table - Cutting width 1270 mm - Programmed movement of motorized saw unit adjustment and tilting UP version: - Swiveling operator panel for maximum flexibility X version: - Compex miter fence for fast, precise miter cuts with automatic length compensation (length adjustment) - Outrigger with angle-adjustable telescopic crosscut fence - Optional degree scale division (Art.-No.: 5510403) - Longitudinal fence with 2 LCD position displays Options included: - Version with max. sliding table travel of 3200 mm - Integrated main and scoring blade start/stop switches on the squaring frame - Squaring frame with CompeX feature - Version “READY 3 UP” - 2 cutting speeds (3500/5000 rpm) Njdpfsd Akygox Afmecu Extraction port diameter: 120 & 80 mm Main motor: 7.0 kW, 400 V, 50 Hz Squaring frame length: 1200 mm Squaring frame width: 650 mm Sliding table length: 3200 mm Sliding table width: 360 mm Cutting width with parallel fence: 1270 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: -46 to +46° Max. cutting height 90°: 136 mm Max. cutting height 45°: 97 mm Max. cutting height -45°: 60 mm Main saw blade diameter: 400 mm Scoring saw blade diameter: 160 mm